From: Thomas Gleixner <tglx@linutronix.de>
To: Andy Lutomirski <luto@kernel.org>, Andy Lutomirski <luto@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>,
LKML <linux-kernel@vger.kernel.org>, X86 ML <x86@kernel.org>,
"Paul E. McKenney" <paulmck@kernel.org>,
Alexandre Chartre <alexandre.chartre@oracle.com>,
Frederic Weisbecker <frederic@kernel.org>,
Paolo Bonzini <pbonzini@redhat.com>,
Sean Christopherson <sean.j.christopherson@intel.com>,
Masami Hiramatsu <mhiramat@kernel.org>,
Petr Mladek <pmladek@suse.com>,
Steven Rostedt <rostedt@goodmis.org>,
Joel Fernandes <joel@joelfernandes.org>,
Boris Ostrovsky <boris.ostrovsky@oracle.com>,
Juergen Gross <jgross@suse.com>, Brian Gerst <brgerst@gmail.com>,
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>,
Josh Poimboeuf <jpoimboe@redhat.com>,
Will Deacon <will@kernel.org>,
Tom Lendacky <thomas.lendacky@amd.com>,
Wei Liu <wei.liu@kernel.org>,
Michael Kelley <mikelley@microsoft.com>,
Jason Chen CJ <jason.cj.chen@intel.com>,
Zhao Yakui <yakui.zhao@intel.com>,
"Peter Zijlstra \(Intel\)" <peterz@infradead.org>
Subject: Re: [patch V6 10/37] x86/entry: Switch XEN/PV hypercall entry to IDTENTRY
Date: Wed, 20 May 2020 21:16:43 +0200 [thread overview]
Message-ID: <871rnewh5w.fsf@nanos.tec.linutronix.de> (raw)
In-Reply-To: <CALCETrX4Zy2iuc39XTifYd_mvezCEUtW2ax3=ec1TF=yZxAHDg@mail.gmail.com>
Andy Lutomirski <luto@kernel.org> writes:
> Andrew Cooper pointed out that there is too much magic in Xen for this
> to work. So never mind.
:)
But you made me stare more at that stuff and I came up with a way
simpler solution. See below.
Thanks,
tglx
8<--------------
arch/x86/entry/common.c | 75 ++++++++++++++++++++++++++++++++++++++--
arch/x86/entry/entry_32.S | 17 ++++-----
arch/x86/entry/entry_64.S | 22 +++--------
arch/x86/include/asm/idtentry.h | 13 ++++++
arch/x86/xen/setup.c | 4 +-
arch/x86/xen/smp_pv.c | 3 +
arch/x86/xen/xen-asm_32.S | 12 +++---
arch/x86/xen/xen-asm_64.S | 2 -
arch/x86/xen/xen-ops.h | 1
drivers/xen/Makefile | 2 -
drivers/xen/preempt.c | 42 ----------------------
11 files changed, 115 insertions(+), 78 deletions(-)
--- a/arch/x86/entry/common.c
+++ b/arch/x86/entry/common.c
@@ -27,6 +27,9 @@
#include <linux/syscalls.h>
#include <linux/uaccess.h>
+#include <xen/xen-ops.h>
+#include <xen/events.h>
+
#include <asm/desc.h>
#include <asm/traps.h>
#include <asm/vdso.h>
@@ -35,6 +38,7 @@
#include <asm/nospec-branch.h>
#include <asm/io_bitmap.h>
#include <asm/syscall.h>
+#include <asm/irq_stack.h>
#define CREATE_TRACE_POINTS
#include <trace/events/syscalls.h>
@@ -539,7 +543,8 @@ void noinstr idtentry_enter(struct pt_re
}
}
-static __always_inline void __idtentry_exit(struct pt_regs *regs)
+static __always_inline void __idtentry_exit(struct pt_regs *regs,
+ bool may_sched)
{
lockdep_assert_irqs_disabled();
@@ -548,7 +553,7 @@ static __always_inline void __idtentry_e
prepare_exit_to_usermode(regs);
} else if (regs->flags & X86_EFLAGS_IF) {
/* Check kernel preemption, if enabled */
- if (IS_ENABLED(CONFIG_PREEMPTION)) {
+ if (IS_ENABLED(CONFIG_PREEMPTION) || may_resched) {
/*
* This needs to be done very carefully.
* idtentry_enter() invoked rcu_irq_enter(). This
@@ -612,5 +617,69 @@ static __always_inline void __idtentry_e
*/
void noinstr idtentry_exit(struct pt_regs *regs)
{
- __idtentry_exit(regs);
+ __idtentry_exit(regs, false);
+}
+
+#ifdef CONFIG_XEN_PV
+
+#ifndef CONFIG_PREEMPTION
+/*
+ * Some hypercalls issued by the toolstack can take many 10s of
+ * seconds. Allow tasks running hypercalls via the privcmd driver to
+ * be voluntarily preempted even if full kernel preemption is
+ * disabled.
+ *
+ * Such preemptible hypercalls are bracketed by
+ * xen_preemptible_hcall_begin() and xen_preemptible_hcall_end()
+ * calls.
+ */
+DEFINE_PER_CPU(bool, xen_in_preemptible_hcall);
+EXPORT_SYMBOL_GPL(xen_in_preemptible_hcall);
+
+/*
+ * In case of scheduling the flag must be cleared and restored after
+ * returning from schedule as the task might move to a different CPU.
+ */
+static __always_inline bool get_and_clear_inhcall(void)
+{
+ boot inhcall = __this_cpu_read(xen_in_preemptible_hcall);
+
+ __this_cpu_write(xen_in_preemptible_hcall, false);
+}
+
+static __always_inline void restore_inhcall(bool inhcall)
+{
+ __this_cpu_write(xen_in_preemptible_hcall, inhcall);
+}
+#else
+static __always_inline bool get_and_clear_inhcall(void) { return false; }
+static __always_inline void restore_inhcall(bool inhcall) { }
+#endif
+
+static void __xen_pv_evtchn_do_upcall(void)
+{
+ irq_enter_rcu();
+ inc_irq_stat(irq_hv_callback_count);
+
+ xen_hvm_evtchn_do_upcall();
+
+ irq_exit_rcu();
+}
+
+__visible noinstr void xen_pv_evtchn_do_upcall(struct pt_regs *regs)
+{
+ struct pt_regs *old_regs;
+ bool inhcall;
+
+ idtentry_enter(regs);
+ old_regs = set_irq_regs(regs);
+
+ run_on_irqstack(__xen_pv_evtchn_do_upcall, NULL, regs);
+
+ set_irq_regs(old_regs);
+
+ inhcall = get_and_clear_inhcall();
+ __idtentry_exit(regs, inhcall);
+ restore_inhcall(inhcall);
}
+#endif /* CONFIG_XEN_PV */
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -1298,7 +1298,10 @@ SYM_CODE_END(native_iret)
#endif
#ifdef CONFIG_XEN_PV
-SYM_FUNC_START(xen_hypervisor_callback)
+/*
+ * See comment in entry_64.S for further explanation
+ */
+SYM_FUNC_START(exc_xen_hypervisor_callback)
/*
* Check to see if we got the event in the critical
* region in xen_iret_direct, after we've reenabled
@@ -1315,14 +1318,11 @@ SYM_FUNC_START(xen_hypervisor_callback)
pushl $-1 /* orig_ax = -1 => not a system call */
SAVE_ALL
ENCODE_FRAME_POINTER
- TRACE_IRQS_OFF
+
mov %esp, %eax
- call xen_evtchn_do_upcall
-#ifndef CONFIG_PREEMPTION
- call xen_maybe_preempt_hcall
-#endif
- jmp ret_from_intr
-SYM_FUNC_END(xen_hypervisor_callback)
+ call xen_pv_evtchn_do_upcall
+ jmp handle_exception_return
+SYM_FUNC_END(exc_xen_hypervisor_callback)
/*
* Hypervisor uses this for application faults while it executes.
@@ -1464,6 +1464,7 @@ SYM_CODE_START_LOCAL_NOALIGN(handle_exce
movl %esp, %eax # pt_regs pointer
CALL_NOSPEC edi
+handle_exception_return:
#ifdef CONFIG_VM86
movl PT_EFLAGS(%esp), %eax # mix EFLAGS and CS
movb PT_CS(%esp), %al
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -1067,10 +1067,6 @@ apicinterrupt IRQ_WORK_VECTOR irq_work
idtentry X86_TRAP_PF page_fault do_page_fault has_error_code=1
-#ifdef CONFIG_XEN_PV
-idtentry 512 /* dummy */ hypervisor_callback xen_do_hypervisor_callback has_error_code=0
-#endif
-
/*
* Reload gs selector with exception handling
* edi: new selector
@@ -1158,9 +1154,10 @@ SYM_FUNC_END(asm_call_on_stack)
* So, on entry to the handler we detect whether we interrupted an
* existing activation in its critical region -- if so, we pop the current
* activation and restart the handler using the previous one.
+ *
+ * C calling convention: exc_xen_hypervisor_callback(struct *pt_regs)
*/
-/* do_hypervisor_callback(struct *pt_regs) */
-SYM_CODE_START_LOCAL(xen_do_hypervisor_callback)
+SYM_CODE_START_LOCAL(exc_xen_hypervisor_callback)
/*
* Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
@@ -1170,15 +1167,10 @@ SYM_CODE_START_LOCAL(xen_do_hypervisor_c
movq %rdi, %rsp /* we don't return, adjust the stack frame */
UNWIND_HINT_REGS
- ENTER_IRQ_STACK old_rsp=%r10
- call xen_evtchn_do_upcall
- LEAVE_IRQ_STACK
-
-#ifndef CONFIG_PREEMPTION
- call xen_maybe_preempt_hcall
-#endif
- jmp error_exit
-SYM_CODE_END(xen_do_hypervisor_callback)
+ call xen_pv_evtchn_do_upcall
+
+ jmp error_return
+SYM_CODE_END(exc_xen_hypervisor_callback)
/*
* Hypervisor uses this for application faults while it executes.
--- a/arch/x86/include/asm/idtentry.h
+++ b/arch/x86/include/asm/idtentry.h
@@ -332,6 +332,13 @@ static __always_inline void __##func(str
* This avoids duplicate defines and ensures that everything is consistent.
*/
+/*
+ * Dummy trap number so the low level ASM macro vector number checks do not
+ * match which results in emitting plain IDTENTRY stubs without bells and
+ * whistels.
+ */
+#define X86_TRAP_OTHER 0xFFFF
+
/* Simple exception entry points. No hardware error code */
DECLARE_IDTENTRY(X86_TRAP_DE, exc_divide_error);
DECLARE_IDTENTRY(X86_TRAP_OF, exc_overflow);
@@ -371,4 +378,10 @@ DECLARE_IDTENTRY_XEN(X86_TRAP_DB, debug)
/* #DF */
DECLARE_IDTENTRY_DF(X86_TRAP_DF, exc_double_fault);
+#ifdef CONFIG_XEN_PV
+DECLARE_IDTENTRY(X86_TRAP_OTHER, exc_xen_hypervisor_callback);
+#endif
+
+#undef X86_TRAP_OTHER
+
#endif
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -20,6 +20,7 @@
#include <asm/setup.h>
#include <asm/acpi.h>
#include <asm/numa.h>
+#include <asm/idtentry.h>
#include <asm/xen/hypervisor.h>
#include <asm/xen/hypercall.h>
@@ -993,7 +994,8 @@ static void __init xen_pvmmu_arch_setup(
HYPERVISOR_vm_assist(VMASST_CMD_enable,
VMASST_TYPE_pae_extended_cr3);
- if (register_callback(CALLBACKTYPE_event, xen_hypervisor_callback) ||
+ if (register_callback(CALLBACKTYPE_event,
+ xen_asm_exc_xen_hypervisor_callback) ||
register_callback(CALLBACKTYPE_failsafe, xen_failsafe_callback))
BUG();
--- a/arch/x86/xen/smp_pv.c
+++ b/arch/x86/xen/smp_pv.c
@@ -27,6 +27,7 @@
#include <asm/paravirt.h>
#include <asm/desc.h>
#include <asm/pgtable.h>
+#include <asm/idtentry.h>
#include <asm/cpu.h>
#include <xen/interface/xen.h>
@@ -347,7 +348,7 @@ cpu_initialize_context(unsigned int cpu,
ctxt->gs_base_kernel = per_cpu_offset(cpu);
#endif
ctxt->event_callback_eip =
- (unsigned long)xen_hypervisor_callback;
+ (unsigned long)xen_asm_exc_xen_hypervisor_callback;
ctxt->failsafe_callback_eip =
(unsigned long)xen_failsafe_callback;
per_cpu(xen_cr3, cpu) = __pa(swapper_pg_dir);
--- a/arch/x86/xen/xen-asm_32.S
+++ b/arch/x86/xen/xen-asm_32.S
@@ -93,7 +93,7 @@ SYM_CODE_START(xen_iret)
/*
* If there's something pending, mask events again so we can
- * jump back into xen_hypervisor_callback. Otherwise do not
+ * jump back into exc_xen_hypervisor_callback. Otherwise do not
* touch XEN_vcpu_info_mask.
*/
jne 1f
@@ -113,7 +113,7 @@ SYM_CODE_START(xen_iret)
* Events are masked, so jumping out of the critical region is
* OK.
*/
- je xen_hypervisor_callback
+ je asm_exc_xen_hypervisor_callback
1: iret
xen_iret_end_crit:
@@ -127,7 +127,7 @@ SYM_CODE_END(xen_iret)
.globl xen_iret_start_crit, xen_iret_end_crit
/*
- * This is called by xen_hypervisor_callback in entry_32.S when it sees
+ * This is called by exc_xen_hypervisor_callback in entry_32.S when it sees
* that the EIP at the time of interrupt was between
* xen_iret_start_crit and xen_iret_end_crit.
*
@@ -144,7 +144,7 @@ SYM_CODE_END(xen_iret)
* eflags }
* cs } nested exception info
* eip }
- * return address : (into xen_hypervisor_callback)
+ * return address : (into asm_exc_xen_hypervisor_callback)
*
* In order to deliver the nested exception properly, we need to discard the
* nested exception frame such that when we handle the exception, we do it
@@ -152,7 +152,8 @@ SYM_CODE_END(xen_iret)
*
* The only caveat is that if the outer eax hasn't been restored yet (i.e.
* it's still on stack), we need to restore its value here.
- */
+*/
+.pushsection .noinstr.text, "ax"
SYM_CODE_START(xen_iret_crit_fixup)
/*
* Paranoia: Make sure we're really coming from kernel space.
@@ -181,3 +182,4 @@ SYM_CODE_START(xen_iret_crit_fixup)
2:
ret
SYM_CODE_END(xen_iret_crit_fixup)
+.popsection
--- a/arch/x86/xen/xen-asm_64.S
+++ b/arch/x86/xen/xen-asm_64.S
@@ -54,7 +54,7 @@ xen_pv_trap asm_exc_simd_coprocessor_err
#ifdef CONFIG_IA32_EMULATION
xen_pv_trap entry_INT80_compat
#endif
-xen_pv_trap hypervisor_callback
+xen_pv_trap asm_exc_xen_hypervisor_callback
__INIT
SYM_CODE_START(xen_early_idt_handler_array)
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -8,7 +8,6 @@
#include <xen/xen-ops.h>
/* These are code, but not functions. Defined in entry.S */
-extern const char xen_hypervisor_callback[];
extern const char xen_failsafe_callback[];
void xen_sysenter_target(void);
--- a/drivers/xen/Makefile
+++ b/drivers/xen/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_HOTPLUG_CPU) += cpu_hotplug.o
-obj-y += grant-table.o features.o balloon.o manage.o preempt.o time.o
+obj-y += grant-table.o features.o balloon.o manage.o time.o
obj-y += mem-reservation.o
obj-y += events/
obj-y += xenbus/
--- a/drivers/xen/preempt.c
+++ /dev/null
@@ -1,42 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Preemptible hypercalls
- *
- * Copyright (C) 2014 Citrix Systems R&D ltd.
- */
-
-#include <linux/sched.h>
-#include <xen/xen-ops.h>
-
-#ifndef CONFIG_PREEMPTION
-
-/*
- * Some hypercalls issued by the toolstack can take many 10s of
- * seconds. Allow tasks running hypercalls via the privcmd driver to
- * be voluntarily preempted even if full kernel preemption is
- * disabled.
- *
- * Such preemptible hypercalls are bracketed by
- * xen_preemptible_hcall_begin() and xen_preemptible_hcall_end()
- * calls.
- */
-
-DEFINE_PER_CPU(bool, xen_in_preemptible_hcall);
-EXPORT_SYMBOL_GPL(xen_in_preemptible_hcall);
-
-asmlinkage __visible void xen_maybe_preempt_hcall(void)
-{
- if (unlikely(__this_cpu_read(xen_in_preemptible_hcall)
- && need_resched())) {
- /*
- * Clear flag as we may be rescheduled on a different
- * cpu.
- */
- __this_cpu_write(xen_in_preemptible_hcall, false);
- local_irq_enable();
- cond_resched();
- local_irq_disable();
- __this_cpu_write(xen_in_preemptible_hcall, true);
- }
-}
-#endif /* CONFIG_PREEMPTION */
next prev parent reply other threads:[~2020-05-20 19:17 UTC|newest]
Thread overview: 159+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-15 23:45 [patch V6 00/37] x86/entry: Rework leftovers and merge plan Thomas Gleixner
2020-05-15 23:45 ` [patch V6 01/37] tracing/hwlat: Use ktime_get_mono_fast_ns() Thomas Gleixner
2020-05-19 21:26 ` Steven Rostedt
2020-05-19 21:45 ` Thomas Gleixner
2020-05-19 22:18 ` Steven Rostedt
2020-05-20 19:51 ` Thomas Gleixner
2020-05-20 20:14 ` Peter Zijlstra
2020-05-20 22:20 ` Thomas Gleixner
2020-05-15 23:45 ` [patch V6 02/37] tracing/hwlat: Split ftrace_nmi_enter/exit() Thomas Gleixner
2020-05-19 22:23 ` Steven Rostedt
2020-05-15 23:45 ` [patch V6 03/37] nmi, tracing: Provide nmi_enter/exit_notrace() Thomas Gleixner
2020-05-17 5:12 ` Andy Lutomirski
2020-05-19 22:24 ` Steven Rostedt
2020-05-15 23:45 ` [patch V6 04/37] x86: Make hardware latency tracing explicit Thomas Gleixner
2020-05-17 5:36 ` Andy Lutomirski
2020-05-17 8:48 ` Thomas Gleixner
2020-05-18 5:50 ` Andy Lutomirski
2020-05-18 8:03 ` Thomas Gleixner
2020-05-18 20:42 ` Andy Lutomirski
2020-05-18 8:01 ` Peter Zijlstra
2020-05-18 8:05 ` Thomas Gleixner
2020-05-18 8:08 ` Peter Zijlstra
2020-05-20 20:09 ` Thomas Gleixner
2020-05-20 20:14 ` Andy Lutomirski
2020-05-20 22:20 ` Thomas Gleixner
2020-05-15 23:45 ` [patch V6 05/37] genirq: Provide irq_enter/exit_rcu() Thomas Gleixner
2020-05-18 23:06 ` Andy Lutomirski
2020-05-15 23:45 ` [patch V6 06/37] genirq: Provde __irq_enter/exit_raw() Thomas Gleixner
2020-05-18 23:07 ` Andy Lutomirski
2020-05-15 23:45 ` [patch V6 07/37] x86/entry: Provide helpers for execute on irqstack Thomas Gleixner
2020-05-18 23:11 ` Andy Lutomirski
2020-05-18 23:46 ` Andy Lutomirski
2020-05-18 23:53 ` Thomas Gleixner
2020-05-18 23:56 ` Andy Lutomirski
2020-05-20 12:35 ` Thomas Gleixner
2020-05-20 15:09 ` Andy Lutomirski
2020-05-20 15:27 ` Thomas Gleixner
2020-05-20 15:36 ` Andy Lutomirski
2020-05-18 23:51 ` Thomas Gleixner
2020-05-15 23:45 ` [patch V6 08/37] x86/entry/64: Move do_softirq_own_stack() to C Thomas Gleixner
2020-05-18 23:48 ` Andy Lutomirski
2020-05-15 23:45 ` [patch V6 09/37] x86/entry: Split idtentry_enter/exit() Thomas Gleixner
2020-05-18 23:49 ` Andy Lutomirski
2020-05-19 8:25 ` Thomas Gleixner
2020-05-15 23:45 ` [patch V6 10/37] x86/entry: Switch XEN/PV hypercall entry to IDTENTRY Thomas Gleixner
2020-05-19 17:06 ` Andy Lutomirski
2020-05-19 18:57 ` Thomas Gleixner
2020-05-19 19:44 ` Andy Lutomirski
2020-05-20 8:06 ` Jürgen Groß
2020-05-20 11:31 ` Andrew Cooper
2020-05-20 14:13 ` Thomas Gleixner
2020-05-20 15:16 ` Andy Lutomirski
2020-05-20 17:22 ` Andy Lutomirski
2020-05-20 19:16 ` Thomas Gleixner [this message]
2020-05-20 23:21 ` Andy Lutomirski
2020-05-21 10:45 ` Thomas Gleixner
2020-05-21 2:23 ` Boris Ostrovsky
2020-05-21 7:08 ` Thomas Gleixner
2020-05-15 23:45 ` [patch V6 11/37] x86/entry/64: Simplify idtentry_body Thomas Gleixner
2020-05-19 17:06 ` Andy Lutomirski
2020-05-15 23:45 ` [patch V6 12/37] x86/entry: Provide idtentry_entry/exit_cond_rcu() Thomas Gleixner
2020-05-19 17:08 ` Andy Lutomirski
2020-05-19 19:00 ` Thomas Gleixner
2020-05-19 20:20 ` Thomas Gleixner
2020-05-19 20:24 ` Andy Lutomirski
2020-05-19 21:20 ` Thomas Gleixner
2020-05-20 0:26 ` Andy Lutomirski
2020-05-20 2:23 ` Paul E. McKenney
2020-05-20 15:36 ` Andy Lutomirski
2020-05-20 16:51 ` Andy Lutomirski
2020-05-20 18:05 ` Paul E. McKenney
2020-05-20 19:49 ` Thomas Gleixner
2020-05-20 22:15 ` Paul E. McKenney
2020-05-20 23:25 ` Paul E. McKenney
2020-05-21 8:31 ` Thomas Gleixner
2020-05-21 13:39 ` Paul E. McKenney
2020-05-21 18:41 ` Thomas Gleixner
2020-05-21 19:04 ` Paul E. McKenney
2020-05-20 18:32 ` Thomas Gleixner
2020-05-20 19:24 ` Thomas Gleixner
2020-05-20 19:42 ` Paul E. McKenney
2020-05-20 17:38 ` Paul E. McKenney
2020-05-20 17:47 ` Andy Lutomirski
2020-05-20 18:11 ` Paul E. McKenney
2020-05-20 14:19 ` Thomas Gleixner
2020-05-27 8:12 ` [tip: x86/entry] " tip-bot2 for Thomas Gleixner
2020-05-15 23:46 ` [patch V6 13/37] x86/entry: Switch page fault exception to IDTENTRY_RAW Thomas Gleixner
2020-05-19 20:12 ` Andy Lutomirski
2020-05-15 23:46 ` [patch V6 14/37] x86/entry: Remove the transition leftovers Thomas Gleixner
2020-05-19 20:13 ` Andy Lutomirski
2020-05-15 23:46 ` [patch V6 15/37] x86/entry: Change exit path of xen_failsafe_callback Thomas Gleixner
2020-05-19 20:14 ` Andy Lutomirski
2020-05-15 23:46 ` [patch V6 16/37] x86/entry/64: Remove error_exit Thomas Gleixner
2020-05-19 20:14 ` Andy Lutomirski
2020-05-15 23:46 ` [patch V6 17/37] x86/entry/32: Remove common_exception Thomas Gleixner
2020-05-19 20:14 ` Andy Lutomirski
2020-05-15 23:46 ` [patch V6 18/37] x86/irq: Use generic irq_regs implementation Thomas Gleixner
2020-05-15 23:46 ` [patch V6 19/37] x86/irq: Convey vector as argument and not in ptregs Thomas Gleixner
2020-05-19 20:19 ` Andy Lutomirski
2020-05-21 13:22 ` Thomas Gleixner
2020-05-22 18:48 ` Boris Ostrovsky
2020-05-22 19:26 ` Josh Poimboeuf
2020-05-22 19:54 ` Thomas Gleixner
2020-05-15 23:46 ` [patch V6 20/37] x86/irq/64: Provide handle_irq() Thomas Gleixner
2020-05-19 20:21 ` Andy Lutomirski
2020-05-15 23:46 ` [patch V6 21/37] x86/entry: Add IRQENTRY_IRQ macro Thomas Gleixner
2020-05-19 20:27 ` Andy Lutomirski
2020-05-15 23:46 ` [patch V6 22/37] x86/entry: Use idtentry for interrupts Thomas Gleixner
2020-05-19 20:28 ` Andy Lutomirski
2020-05-15 23:46 ` [patch V6 23/37] x86/entry: Provide IDTENTRY_SYSVEC Thomas Gleixner
2020-05-20 0:29 ` Andy Lutomirski
2020-05-20 15:07 ` Thomas Gleixner
2020-05-15 23:46 ` [patch V6 24/37] x86/entry: Convert APIC interrupts to IDTENTRY_SYSVEC Thomas Gleixner
2020-05-20 0:27 ` Andy Lutomirski
2020-05-15 23:46 ` [patch V6 25/37] x86/entry: Convert SMP system vectors " Thomas Gleixner
2020-05-20 0:28 ` Andy Lutomirski
2020-05-15 23:46 ` [patch V6 26/37] x86/entry: Convert various system vectors Thomas Gleixner
2020-05-20 0:30 ` Andy Lutomirski
2020-05-15 23:46 ` [patch V6 27/37] x86/entry: Convert KVM vectors to IDTENTRY_SYSVEC Thomas Gleixner
2020-05-20 0:30 ` Andy Lutomirski
2020-05-15 23:46 ` [patch V6 28/37] x86/entry: Convert various hypervisor " Thomas Gleixner
2020-05-20 0:31 ` Andy Lutomirski
2020-05-15 23:46 ` [patch V6 29/37] x86/entry: Convert XEN hypercall vector " Thomas Gleixner
2020-05-20 0:31 ` Andy Lutomirski
2020-05-15 23:46 ` [patch V6 30/37] x86/entry: Convert reschedule interrupt to IDTENTRY_RAW Thomas Gleixner
2020-05-19 23:57 ` Andy Lutomirski
2020-05-20 15:08 ` Thomas Gleixner
2020-05-15 23:46 ` [patch V6 31/37] x86/entry: Remove the apic/BUILD interrupt leftovers Thomas Gleixner
2020-05-20 0:32 ` Andy Lutomirski
2020-05-15 23:46 ` [patch V6 32/37] x86/entry/64: Remove IRQ stack switching ASM Thomas Gleixner
2020-05-20 0:33 ` Andy Lutomirski
2020-05-15 23:46 ` [patch V6 33/37] x86/entry: Make enter_from_user_mode() static Thomas Gleixner
2020-05-20 0:34 ` Andy Lutomirski
2020-05-15 23:46 ` [patch V6 34/37] x86/entry/32: Remove redundant irq disable code Thomas Gleixner
2020-05-20 0:35 ` Andy Lutomirski
2020-05-15 23:46 ` [patch V6 35/37] x86/entry/64: Remove TRACE_IRQS_*_DEBUG Thomas Gleixner
2020-05-20 0:46 ` Andy Lutomirski
2020-05-15 23:46 ` [patch V6 36/37] x86/entry: Move paranoid irq tracing out of ASM code Thomas Gleixner
2020-05-20 0:53 ` Andy Lutomirski
2020-05-20 15:16 ` Thomas Gleixner
2020-05-20 17:13 ` Andy Lutomirski
2020-05-20 18:33 ` Thomas Gleixner
2020-05-15 23:46 ` [patch V6 37/37] x86/entry: Remove the TRACE_IRQS cruft Thomas Gleixner
2020-05-18 23:07 ` Andy Lutomirski
2020-05-16 17:18 ` [patch V6 00/37] x86/entry: Rework leftovers and merge plan Paul E. McKenney
2020-05-19 12:28 ` Joel Fernandes
2020-05-18 16:07 ` Peter Zijlstra
2020-05-18 18:53 ` Thomas Gleixner
2020-05-19 8:29 ` Peter Zijlstra
2020-05-18 20:24 ` Thomas Gleixner
2020-05-19 8:38 ` Peter Zijlstra
2020-05-19 9:02 ` Peter Zijlstra
2020-05-23 2:52 ` Lai Jiangshan
2020-05-23 13:08 ` Peter Zijlstra
2020-06-15 16:17 ` Peter Zijlstra
2020-05-19 9:06 ` Thomas Gleixner
2020-05-19 18:37 ` Steven Rostedt
2020-05-19 19:09 ` Thomas Gleixner
2020-05-19 19:13 ` Steven Rostedt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=871rnewh5w.fsf@nanos.tec.linutronix.de \
--to=tglx@linutronix.de \
--cc=alexandre.chartre@oracle.com \
--cc=andrew.cooper3@citrix.com \
--cc=boris.ostrovsky@oracle.com \
--cc=brgerst@gmail.com \
--cc=frederic@kernel.org \
--cc=jason.cj.chen@intel.com \
--cc=jgross@suse.com \
--cc=joel@joelfernandes.org \
--cc=jpoimboe@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@kernel.org \
--cc=mathieu.desnoyers@efficios.com \
--cc=mhiramat@kernel.org \
--cc=mikelley@microsoft.com \
--cc=paulmck@kernel.org \
--cc=pbonzini@redhat.com \
--cc=peterz@infradead.org \
--cc=pmladek@suse.com \
--cc=rostedt@goodmis.org \
--cc=sean.j.christopherson@intel.com \
--cc=thomas.lendacky@amd.com \
--cc=wei.liu@kernel.org \
--cc=will@kernel.org \
--cc=x86@kernel.org \
--cc=yakui.zhao@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).