Use devm_regulator_bulk_get_enable() instead of open coded bulk-get, bulk-enable, add-action-to-disable-at-detach - pattern. A functional change (which seems like a bugfix) is that if regulator_bulk_get fails, the enable is not attempted. Signed-off-by: Matti Vaittinen --- v2 => v3 Split to own patch. --- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 -- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 30 ++++---------------- 2 files changed, 5 insertions(+), 27 deletions(-) diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index a86dd29a4738..03238c64c777 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -372,7 +372,6 @@ struct st_lsm6dsx_sensor { * struct st_lsm6dsx_hw - ST IMU MEMS hw instance * @dev: Pointer to instance of struct device (I2C or SPI). * @regmap: Register map of the device. - * @regulators: VDD/VDDIO voltage regulators. * @irq: Device interrupt line (I2C or SPI). * @fifo_lock: Mutex to prevent concurrent access to the hw FIFO. * @conf_lock: Mutex to prevent concurrent FIFO configuration update. @@ -395,7 +394,6 @@ struct st_lsm6dsx_sensor { struct st_lsm6dsx_hw { struct device *dev; struct regmap *regmap; - struct regulator_bulk_data regulators[2]; int irq; struct mutex fifo_lock; diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index b5e4a4113652..c328d1a36d34 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -2172,36 +2172,20 @@ static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw) static int st_lsm6dsx_init_regulators(struct device *dev) { - struct st_lsm6dsx_hw *hw = dev_get_drvdata(dev); int err; - /* vdd-vddio power regulators */ - hw->regulators[0].supply = "vdd"; - hw->regulators[1].supply = "vddio"; - err = devm_regulator_bulk_get(dev, ARRAY_SIZE(hw->regulators), - hw->regulators); - if (err) - return dev_err_probe(dev, err, "failed to get regulators\n"); + static const char * const regulators[] = {"vdd", "vddio"}; - err = regulator_bulk_enable(ARRAY_SIZE(hw->regulators), - hw->regulators); - if (err) { - dev_err(dev, "failed to enable regulators: %d\n", err); - return err; - } + err = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(regulators), + regulators); + if (err) + return dev_err_probe(dev, err, "failed to enable regulators\n"); msleep(50); return 0; } -static void st_lsm6dsx_chip_uninit(void *data) -{ - struct st_lsm6dsx_hw *hw = data; - - regulator_bulk_disable(ARRAY_SIZE(hw->regulators), hw->regulators); -} - int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, struct regmap *regmap) { @@ -2225,10 +2209,6 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, if (err) return err; - err = devm_add_action_or_reset(dev, st_lsm6dsx_chip_uninit, hw); - if (err) - return err; - hw->buff = devm_kzalloc(dev, ST_LSM6DSX_BUFF_SIZE, GFP_KERNEL); if (!hw->buff) return -ENOMEM; -- 2.37.1 -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~ Simon says - in Latin please. ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~ Thanks to Simon Glass for the translation =]