* 2.6.15-rt1
@ 2006-01-03 9:47 Ingo Molnar
2006-01-03 11:21 ` 2.6.15-rt1 Michal Piotrowski
` (5 more replies)
0 siblings, 6 replies; 23+ messages in thread
From: Ingo Molnar @ 2006-01-03 9:47 UTC (permalink / raw)
To: linux-kernel
i have released the 2.6.15-rt1 tree, which can be downloaded from the
usual place:
http://redhat.com/~mingo/realtime-preempt/
no big changes, this release is mainly a merge to v2.6.15, and should
fix some of the RTC driver problems reported for 2.6.15-rc7-rt3.
to build a 2.6.15-rt1 tree, the following patches should be applied:
http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.15.tar.bz2
http://redhat.com/~mingo/realtime-preempt/patch-2.6.15-rt1
Ingo
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.15-rt1
2006-01-03 9:47 2.6.15-rt1 Ingo Molnar
@ 2006-01-03 11:21 ` Michal Piotrowski
2006-01-03 11:27 ` 2.6.15-rt1 Ingo Molnar
2006-01-03 14:33 ` 2.6.15-rt1 Florian Schmidt
` (4 subsequent siblings)
5 siblings, 1 reply; 23+ messages in thread
From: Michal Piotrowski @ 2006-01-03 11:21 UTC (permalink / raw)
To: Ingo Molnar; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 31939 bytes --]
Hi Ingo,
[1.] One line summary of the problem:
the same things as in 2.6.15-rc7-rt3, dmesg attached
[4.] Kernel version (from /proc/version):
Linux version 2.6.15-rt1 (michal@debian) (gcc version 4.0.3 20051201
(prerelease) (Debian 4.0.2-5)) #4 SMP PREEMPT Tue Jan 3 11:48:13 CET
2006
[9.] Config file
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.15-rt1
# Tue Jan 3 11:38:40 2006
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_SYSCTL=y
CONFIG_HOTPLUG=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Block layer
#
# CONFIG_LBD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=m
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
# CONFIG_HPET_TIMER is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_HIGH_RES_RESOLUTION=1000
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_SCHED_SMT=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT_DESKTOP is not set
CONFIG_PREEMPT_RT=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_SOFTIRQS=y
CONFIG_PREEMPT_HARDIRQS=y
CONFIG_PREEMPT_BKL=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_STATS=y
CONFIG_ASM_SEMAPHORES=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_PHYSICAL_START=0x100000
CONFIG_KEXEC=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
#
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_X86_SPEEDSTEP_LIB=m
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_HOTPLUG_CPU is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Networking
#
# CONFIG_NET is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_IDE_TASK_IOCTL=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
CONFIG_SCSI_ATA_PIIX=y
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_SATA_VITESSE is not set
CONFIG_SCSI_SATA_INTEL_COMBINED=y
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_RTC_HISTOGRAM=m
CONFIG_BLOCKER=y
CONFIG_LPPTEST=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=m
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83627HF=m
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
#
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# Networking support is needed for USB Network Adapter support
#
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
#
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
CONFIG_PROFILE_NMI=y
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_PRINTK_IGNORE_LOGLEVEL is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_PARANOID_GENERIC_TIME=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHEDSTATS=y
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_IRQ_FLAGS=y
CONFIG_WAKEUP_TIMING=y
CONFIG_WAKEUP_LATENCY_HIST=y
CONFIG_PREEMPT_TRACE=y
CONFIG_CRITICAL_PREEMPT_TIMING=y
CONFIG_PREEMPT_OFF_HIST=y
CONFIG_CRITICAL_IRQSOFF_TIMING=y
CONFIG_INTERRUPT_OFF_HIST=y
CONFIG_CRITICAL_TIMING=y
CONFIG_LATENCY_TIMING=y
CONFIG_CRITICAL_LATENCY_HIST=y
CONFIG_LATENCY_HIST=y
CONFIG_LATENCY_TRACE=y
CONFIG_MCOUNT=y
CONFIG_DEBUG_DEADLOCKS=y
CONFIG_DEBUG_RT_LOCKING_MODE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_VM=y
CONFIG_FRAME_POINTER=y
CONFIG_RCU_TORTURE_TEST=m
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_SECLVL=y
#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
OOPS Reporting Tool v.ltg1
www.wsi.edu.pl/~piotrowskim/files/ort/ltg/
Regards,
Michal Piotrowski
[-- Attachment #2: rt-oops1.txt.bz2 --]
[-- Type: application/x-bzip2, Size: 14510 bytes --]
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.15-rt1
2006-01-03 11:21 ` 2.6.15-rt1 Michal Piotrowski
@ 2006-01-03 11:27 ` Ingo Molnar
2006-01-03 11:34 ` 2.6.15-rt1 Michal Piotrowski
0 siblings, 1 reply; 23+ messages in thread
From: Ingo Molnar @ 2006-01-03 11:27 UTC (permalink / raw)
To: Michal Piotrowski; +Cc: linux-kernel
* Michal Piotrowski <michal.k.k.piotrowski@gmail.com> wrote:
> Hi Ingo,
>
> [1.] One line summary of the problem:
> the same things as in 2.6.15-rc7-rt3, dmesg attached
ok, that's the lost-preemption-check still triggering. Does the system
otherwise work as expected? The message should be harmless - unless you
are also seeing other problems.
Ingo
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.15-rt1
2006-01-03 11:27 ` 2.6.15-rt1 Ingo Molnar
@ 2006-01-03 11:34 ` Michal Piotrowski
0 siblings, 0 replies; 23+ messages in thread
From: Michal Piotrowski @ 2006-01-03 11:34 UTC (permalink / raw)
To: Ingo Molnar; +Cc: linux-kernel
On 03/01/06, Ingo Molnar <mingo@elte.hu> wrote:
> ok, that's the lost-preemption-check still triggering. Does the system
> otherwise work as expected? The message should be harmless - unless you
> are also seeing other problems.
>
> Ingo
>
So...
Networking doesn't work at all (I disabled it, for now - I have got
oops flood, probably while loading ipv6 module).
Xorg doesn't work.
Regards,
Michal Piotrowski
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.15-rt1
2006-01-03 9:47 2.6.15-rt1 Ingo Molnar
2006-01-03 11:21 ` 2.6.15-rt1 Michal Piotrowski
@ 2006-01-03 14:33 ` Florian Schmidt
2006-01-03 15:13 ` 2.6.15-rt1 Florian Schmidt
2006-01-03 23:12 ` 2.6.15-rt1 David Brown
` (3 subsequent siblings)
5 siblings, 1 reply; 23+ messages in thread
From: Florian Schmidt @ 2006-01-03 14:33 UTC (permalink / raw)
To: Ingo Molnar; +Cc: linux-kernel
On Tue, 3 Jan 2006 10:47:20 +0100
Ingo Molnar <mingo@elte.hu> wrote:
> i have released the 2.6.15-rt1 tree, which can be downloaded from the
> usual place:
>
> http://redhat.com/~mingo/realtime-preempt/
>
> no big changes, this release is mainly a merge to v2.6.15, and should
> fix some of the RTC driver problems reported for 2.6.15-rc7-rt3.
And indeed it does so for me. Thanks. The swapper BUG is still there,
but i suppose that was expected?
BUG: swapper:0 task might have lost a preemption check!
[<c0100b3b>] cpu_idle+0x6b/0xb0 (8)
[<c010026b>] _stext+0x4b/0x60 (4)
[<c0364831>] start_kernel+0x191/0x210 (16)
[<c0364350>] unknown_bootoption+0x0/0x200 (20)
---------------------------
| preempt count: 00000000 ]
| 0-level deep critical section nesting:
----------------------------------------
------------------------------
| showing all locks held by: | (swapper/0 [c0319d20, 140]):
------------------------------
Flo
--
Palimm Palimm!
http://tapas.affenbande.org
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.15-rt1
2006-01-03 14:33 ` 2.6.15-rt1 Florian Schmidt
@ 2006-01-03 15:13 ` Florian Schmidt
2006-01-03 18:40 ` 2.6.15-rt1 Steven Rostedt
0 siblings, 1 reply; 23+ messages in thread
From: Florian Schmidt @ 2006-01-03 15:13 UTC (permalink / raw)
To: Florian Schmidt; +Cc: Ingo Molnar, linux-kernel
On Tue, 3 Jan 2006 15:33:17 +0100
Florian Schmidt <mista.tapas@gmx.net> wrote:
> And indeed it does so for me. Thanks. The swapper BUG is still there,
> but i suppose that was expected?
Hi,
i rejoiced too early. It just took a while to show up:
==========================================
[ BUG: lock recursion deadlock detected! |
------------------------------------------
already locked: [c0331b20] {rtc_task_lock}
.. held by: IRQ 8: 18 [efd1ce90, 1]
... acquired at: rtc_interrupt+0x79/0x130
-{current task's backtrace}----------------->
[<c0130d07>] check_deadlock+0x307/0x340 (8)
[<c02377e9>] rtc_interrupt+0x79/0x130 (8)
[<c02d9b72>] __schedule+0x392/0x710 (4)
[<c0238864>] rtc_control+0x24/0x80 (16)
[<c0131af1>] task_blocks_on_lock+0x41/0x130 (12)
[<c0238864>] rtc_control+0x24/0x80 (16)
[<c02db2c8>] __down_mutex+0x498/0x910 (24)
[<c0238864>] rtc_control+0x24/0x80 (16)
[<c0238864>] rtc_control+0x24/0x80 (80)
[<c0142380>] do_irqd+0x0/0xa0 (8)
[<c02dd9e3>] _spin_lock_irq+0x23/0x50 (4)
[<c0238864>] rtc_control+0x24/0x80 (8)
[<c0238864>] rtc_control+0x24/0x80 (16)
[<f09f70f9>] rtctimer_stop+0x29/0x60 [snd_rtctimer] (16)
[<f081e20e>] snd_timer_interrupt+0x2ae/0x2f0 [snd_timer] (16)
[<c0142380>] do_irqd+0x0/0xa0 (56)
[<f09f7147>] rtctimer_interrupt+0x17/0x20 [snd_rtctimer] (4)
[<c02377fc>] rtc_interrupt+0x8c/0x130 (12)
[<c0141136>] handle_IRQ_event+0x76/0xf0 (20)
[<c0142380>] do_irqd+0x0/0xa0 (44)
[<c0142225>] thread_edge_irq+0x85/0x130 (4)
[<c0142307>] do_hardirq+0x37/0xb0 (32)
[<c01423e7>] do_irqd+0x67/0xa0 (16)
[<c012c3e6>] kthread+0xb6/0xc0 (28)
[<c012c330>] kthread+0x0/0xc0 (24)
[<c0100ded>] kernel_thread_helper+0x5/0x18 (16)
---------------------------
| preempt count: 00000002 ]
| 2-level deep critical section nesting:
----------------------------------------
.. [<c013949a>] .... add_preempt_count+0x1a/0x20
.....[<00000000>] .. ( <= _stext+0x3feffde0/0x60)
.. [<c013949a>] .... add_preempt_count+0x1a/0x20
.....[<00000000>] .. ( <= _stext+0x3feffde0/0x60)
showing all tasks:
S init: 1 [c16fb500, 116] (not blocked)
S softirq-high/0: 2 [c16fae10, 0] (not blocked)
S softirq-timer/0: 3 [c16fa720, 0] (not blocked)
S softirq-net-tx/: 4 [c16fa030, 98] (not blocked)
S softirq-net-rx/: 5 [c1709520, 98] (not blocked)
S softirq-scsi/0: 6 [c1708e30, 98] (not blocked)
S softirq-tasklet: 7 [c1708740, 98] (not blocked)
S watchdog/0: 8 [c1708050, 0] (not blocked)
S desched/0: 9 [c1715540, 105] (not blocked)
S events/0: 10 [c1714e50, 98] (not blocked)
S khelper: 11 [c1714760, 110] (not blocked)
S kthread: 12 [c1714070, 111] (not blocked)
S kblockd/0: 13 [efcf9560, 110] (not blocked)
S pdflush: 14 [efcf8e70, 125] (not blocked)
S pdflush: 15 [efcf8780, 115] (not blocked)
S aio/0: 17 [efd1d580, 120] (not blocked)
S kswapd0: 16 [efcf8090, 125] (not blocked)
S IRQ 8: 18 [efd1ce90, 1] (not blocked)
S kseriod: 19 [efd1c7a0, 110] (not blocked)
S IRQ 12: 20 [efd1c0b0, 51] (not blocked)
S IRQ 14: 21 [efe235a0, 44] (not blocked)
S IRQ 15: 22 [efe22eb0, 44] (not blocked)
S IRQ 1: 23 [efe227c0, 0] (not blocked)
S kjournald: 24 [efe220d0, 115] (not blocked)
S kgameportd: 186 [ed9dd5e0, 111] (not blocked)
S IRQ 4: 189 [ed211600, 17] (not blocked)
S khubd: 209 [ed210f10, 110] (not blocked)
S IRQ 5: 210 [edff40f0, 56] (not blocked)
S IRQ 10: 211 [ed9dcef0, 89] (not blocked)
S kjournald: 284 [edae3620, 115] (not blocked)
S kjournald: 287 [ed210820, 119] (not blocked)
S kjournald: 288 [ed210130, 119] (not blocked)
S kjournald: 289 [edae2f30, 119] (not blocked)
S kjournald: 290 [edae2840, 115] (not blocked)
S portmap: 413 [edae2150, 116] (not blocked)
S syslogd: 531 [edff47e0, 116] (not blocked)
S klogd: 537 [edff4ed0, 116] (not blocked)
S pppd: 547 [ec844860, 116] (not blocked)
S pppoe: 551 [ed9dc110, 116] (not blocked)
S IRQ 3: 554 [ec844170, 58] (not blocked)
S automount: 649 [ec176880, 116] (not blocked)
S dbus-daemon-1: 655 [ec177660, 115] (not blocked)
S hald: 660 [ec844f50, 116] (not blocked)
S exim4: 733 [ec2168a0, 116] (not blocked)
S gpm: 741 [ec20f6a0, 115] (not blocked)
S sshd: 753 [ec176f70, 118] (not blocked)
S xfs: 762 [ec216f90, 116] (not blocked)
S cron: 798 [ec217680, 116] (not blocked)
S rt_watchdog: 854 [ec20e8c0, 1] (not blocked)
S rt_watchdog: 855 [ec176190, 98] (not blocked)
S gdm: 864 [ec2161b0, 115] (not blocked)
S gdm: 865 [ec845640, 116] (not blocked)
S Xorg: 875 [ec20efb0, 115] (not blocked)
S getty: 886 [ed9dc800, 117] (not blocked)
S getty: 887 [eb5aefd0, 117] (not blocked)
S getty: 888 [eb5af6c0, 117] (not blocked)
S getty: 889 [edff55c0, 117] (not blocked)
S getty: 890 [ec20e1d0, 117] (not blocked)
S getty: 891 [eb5ae8e0, 117] (not blocked)
S sh: 930 [ea056ff0, 122] (not blocked)
S ssh-agent: 1000 [ea0576e0, 116] (not blocked)
S ssh-agent: 1001 [e8bad700, 116] (not blocked)
S sh: 1005 [ea056900, 121] (not blocked)
S xscreensaver: 1008 [ea056210, 115] (not blocked)
S xfce4-session: 1010 [eb5ae1f0, 115] (not blocked)
S xfce-mcs-manage: 1015 [e8bad010, 115] (not blocked)
S xfwm4: 1018 [e8bac230, 115] (not blocked)
S xftaskbar4: 1020 [e7251720, 116] (not blocked)
S xfdesktop: 1022 [e7251030, 116] (not blocked)
S xfce4-panel: 1024 [e7250940, 115] (not blocked)
S gkrellm: 1027 [e7250250, 115] (not blocked)
S evolution: 1029 [e6657740, 116] (not blocked)
S evolution: 1090 [e30bf090, 115] (not blocked)
S sylpheed-claws: 1031 [e6657050, 115] (not blocked)
S gaim: 1035 [e6656270, 115] (not blocked)
S xmms: 1038 [e6f5b760, 115] (not blocked)
S xmms: 1045 [e6f5b070, 115] (not blocked)
S xmms: 1062 [e30be9a0, 115] (not blocked)
S gconfd-2: 1057 [e8bac920, 116] (not blocked)
S bonobo-activati: 1065 [e6f5a290, 115] (not blocked)
S evolution-data-: 1077 [e108b7a0, 116] (not blocked)
S evolution-data-: 1082 [decc77c0, 116] (not blocked)
S evolution-data-: 1109 [decc69e0, 116] (not blocked)
S evolution-alarm: 1102 [e108a9c0, 116] (not blocked)
S evolution-alarm: 1103 [e108a2d0, 116] (not blocked)
S evolution-alarm: 1116 [dfa26a20, 122] (not blocked)
S xterm: 1200 [dfa110f0, 116] (not blocked)
S bash: 1201 [dfa117e0, 115] (not blocked)
S ssh: 1223 [dfa10310, 116] (not blocked)
S qjackctl: 1339 [dfa10a00, 115] (not blocked)
S qjackctl: 2302 [dfefca40, 30] (not blocked)
S xterm: 1351 [e30bf780, 115] (not blocked)
S bash: 1352 [e6f5a980, 116] (not blocked)
R xterm: 1368 [dfa27800, 116] (not blocked)
S bash: 1369 [dfefd130, 116] (not blocked)
S htop: 1480 [d14eaae0, 117] (not blocked)
S xterm: 2206 [d94e1170, 116] (not blocked)
S bash: 2207 [d94e1860, 115] (not blocked)
S jackd: 2296 [d9a16a60, 121] (not blocked)
S jackd: 2297 [e6656960, 116] (not blocked)
S jackd: 2298 [d9a17840, 116] (not blocked)
S jackd: 2299 [d9a16370, 19] (not blocked)
S jackd: 2300 [dfefc350, 29] (not blocked)
S firefox-bin: 3040 [d9a17150, 116] (not blocked)
S firefox-bin: 3047 [d14eb1d0, 116] (not blocked)
S firefox-bin: 3049 [dfefd820, 116] (not blocked)
S xterm: 3193 [cf0ab520, 116] (not blocked)
S bash: 3194 [e30be2b0, 116] (not blocked)
R rosegarden4: 3416 [e108b0b0, 116] (not blocked)
S kdeinit: 3418 [d14ea3f0, 116] (not blocked)
S dcopserver: 3421 [cf0aa050, 115] (not blocked)
S klauncher: 3423 [ce88c070, 115] (not blocked)
S kded: 3425 [ce88d540, 116] (not blocked)
R rosegardenseque: 3429 [cf0aae30, 116] (not blocked)
S rosegardenseque: 3431 [decc70d0, 115] (not blocked)
S rosegardenseque: 3432 [cf0aa740, 30] (not blocked)
=============================================
[ turning off deadlock detection. Please report this trace. ]
--
Palimm Palimm!
http://tapas.affenbande.org
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.15-rt1
2006-01-03 15:13 ` 2.6.15-rt1 Florian Schmidt
@ 2006-01-03 18:40 ` Steven Rostedt
2006-01-03 18:56 ` 2.6.15-rt1 Steven Rostedt
0 siblings, 1 reply; 23+ messages in thread
From: Steven Rostedt @ 2006-01-03 18:40 UTC (permalink / raw)
To: Florian Schmidt; +Cc: linux-kernel, Ingo Molnar
[-- Attachment #1: Type: text/plain, Size: 6589 bytes --]
On Tue, 2006-01-03 at 16:13 +0100, Florian Schmidt wrote:
>
> i rejoiced too early. It just took a while to show up:
Yep.
Ingo, I guess we have a problem. There must be a reason not to hold
the rtc_lock and call the {add,mod,del}_timer functions, but your change
only makes the race condition less likely to happen, and not prevent it.
The attached program run on an SMP machine will eventually trigger the
race.
$ gcc -o rtc_ioctl rtc_ioctl.c -lpthread
$ while : ; do ./rtc_ioctl ; done
The race is here:
case RTC_PIE_ON: /* Allow periodic ints */
{
/*
* We don't really want Joe User enabling more
* than 64Hz of interrupts on a multi-user machine.
*/
if (!kernel && (rtc_freq > rtc_max_user_freq) &&
(!capable(CAP_SYS_RESOURCE)))
return -EACCES;
if (!(rtc_status & RTC_TIMER_ON)) {
// Another thread preempts here and turns the timer on.
spin_lock_irq (&rtc_lock);
rtc_irq_timer.expires = jiffies + HZ/rtc_freq + 2*HZ/100;
rtc_status |= RTC_TIMER_ON;
spin_unlock_irq (&rtc_lock);
// now that the timer is pending, the add_timer will BUG.
add_timer(&rtc_irq_timer);
}
set_rtc_irq_bit(RTC_PIE);
Should we create another lock to protect only the {add,mod,del}_timer?
Like the following patch?
-- Steve
Index: linux-2.6.15-rt1/drivers/char/rtc.c
===================================================================
--- linux-2.6.15-rt1.orig/drivers/char/rtc.c 2006-01-03 07:41:48.000000000 -0500
+++ linux-2.6.15-rt1/drivers/char/rtc.c 2006-01-03 13:25:47.000000000 -0500
@@ -205,6 +205,7 @@
* rtc_task_lock nests inside rtc_lock.
*/
static DEFINE_SPINLOCK(rtc_task_lock);
+static DEFINE_SPINLOCK(rtc_timer_lock);
static rtc_task_t *rtc_callback = NULL;
#endif
@@ -392,7 +393,8 @@
* the last read in the remainder of rtc_irq_data.
*/
- spin_lock (&rtc_lock);
+ spin_lock(&rtc_timer_lock);
+ spin_lock(&rtc_lock);
rtc_irq_data += 0x100;
rtc_irq_data &= ~0xff;
if (is_hpet_enabled()) {
@@ -410,9 +412,10 @@
if (rtc_status & RTC_TIMER_ON)
mod = 1;
- spin_unlock (&rtc_lock);
+ spin_unlock(&rtc_lock);
if (mod)
mod_timer(&rtc_irq_timer, jiffies + HZ/rtc_freq + 2*HZ/100);
+ spin_unlock(&rtc_timer_lock);
/* Now do the rest of the actions */
spin_lock(&rtc_task_lock);
@@ -506,10 +509,10 @@
__set_current_state(TASK_INTERRUPTIBLE);
- spin_lock_irq (&rtc_lock);
+ spin_lock_irq(&rtc_lock);
data = rtc_irq_data;
rtc_irq_data = 0;
- spin_unlock_irq (&rtc_lock);
+ spin_unlock_irq(&rtc_lock);
if (data != 0)
break;
@@ -541,7 +544,7 @@
static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel)
{
- struct rtc_time wtime;
+ struct rtc_time wtime;
#ifdef RTC_IRQ
if (rtc_has_irq == 0) {
@@ -573,17 +576,23 @@
}
case RTC_PIE_OFF: /* Mask periodic int. enab. bit */
{
+ int del = 0;
mask_rtc_irq_bit(RTC_PIE);
+ spin_lock_irq(&rtc_timer_lock);
+ spin_lock(&rtc_lock);
if (rtc_status & RTC_TIMER_ON) {
- spin_lock_irq (&rtc_lock);
+ del = 1;
rtc_status &= ~RTC_TIMER_ON;
- spin_unlock_irq (&rtc_lock);
- del_timer(&rtc_irq_timer);
}
+ spin_unlock(&rtc_lock);
+ if (del)
+ del_timer(&rtc_irq_timer);
+ spin_unlock_irq(&rtc_timer_lock);
return 0;
}
case RTC_PIE_ON: /* Allow periodic ints */
{
+ int add = 0;
/*
* We don't really want Joe User enabling more
@@ -593,13 +602,17 @@
(!capable(CAP_SYS_RESOURCE)))
return -EACCES;
+ spin_lock_irq(&rtc_timer_lock);
+ spin_lock(&rtc_lock);
if (!(rtc_status & RTC_TIMER_ON)) {
- spin_lock_irq (&rtc_lock);
+ add = 1;
rtc_irq_timer.expires = jiffies + HZ/rtc_freq + 2*HZ/100;
rtc_status |= RTC_TIMER_ON;
- spin_unlock_irq (&rtc_lock);
- add_timer(&rtc_irq_timer);
}
+ spin_unlock(&rtc_lock);
+ if (add)
+ add_timer(&rtc_irq_timer);
+ spin_unlock_irq(&rtc_timer_lock);
set_rtc_irq_bit(RTC_PIE);
return 0;
}
@@ -863,7 +876,7 @@
* needed here. Or anywhere else in this driver. */
static int rtc_open(struct inode *inode, struct file *file)
{
- spin_lock_irq (&rtc_lock);
+ spin_lock_irq(&rtc_lock);
if(rtc_status & RTC_IS_OPEN)
goto out_busy;
@@ -872,11 +885,11 @@
rtc_status |= RTC_IS_OPEN;
rtc_irq_data = 0;
- spin_unlock_irq (&rtc_lock);
+ spin_unlock_irq(&rtc_lock);
return 0;
out_busy:
- spin_unlock_irq (&rtc_lock);
+ spin_unlock_irq(&rtc_lock);
return -EBUSY;
}
@@ -900,7 +913,8 @@
* in use, and clear the data.
*/
- spin_lock_irq(&rtc_lock);
+ spin_lock_irq(&rtc_timer_lock);
+ spin_lock(&rtc_lock);
if (!hpet_mask_rtc_irq_bit(RTC_PIE | RTC_AIE | RTC_UIE)) {
tmp = CMOS_READ(RTC_CONTROL);
tmp &= ~RTC_PIE;
@@ -914,9 +928,10 @@
rtc_status &= ~RTC_TIMER_ON;
del = 1;
}
- spin_unlock_irq(&rtc_lock);
+ spin_unlock(&rtc_lock);
if (del)
del_timer(&rtc_irq_timer);
+ spin_unlock_irq(&rtc_timer_lock);
if (file->f_flags & FASYNC) {
rtc_fasync (-1, file, 0);
@@ -924,10 +939,10 @@
no_irq:
#endif
- spin_lock_irq (&rtc_lock);
+ spin_lock_irq(&rtc_lock);
rtc_irq_data = 0;
rtc_status &= ~RTC_IS_OPEN;
- spin_unlock_irq (&rtc_lock);
+ spin_unlock_irq(&rtc_lock);
rtc_close_event();
return 0;
}
@@ -943,9 +958,9 @@
poll_wait(file, &rtc_wait, wait);
- spin_lock_irq (&rtc_lock);
+ spin_lock_irq(&rtc_lock);
l = rtc_irq_data;
- spin_unlock_irq (&rtc_lock);
+ spin_unlock_irq(&rtc_lock);
if (l != 0)
return POLLIN | POLLRDNORM;
@@ -995,11 +1010,13 @@
unsigned char tmp;
int del;
- spin_lock_irq(&rtc_lock);
+ spin_lock_irq(&rtc_timer_lock);
+ spin_lock(&rtc_lock);
spin_lock(&rtc_task_lock);
if (rtc_callback != task) {
spin_unlock(&rtc_task_lock);
- spin_unlock_irq(&rtc_lock);
+ spin_unlock(&rtc_lock);
+ spin_unlock_irq(&rtc_timer_lock);
return -ENXIO;
}
rtc_callback = NULL;
@@ -1020,9 +1037,10 @@
}
rtc_status &= ~RTC_IS_OPEN;
spin_unlock(&rtc_task_lock);
+ spin_unlock(&rtc_lock);
if (del)
del_timer(&rtc_irq_timer);
- spin_unlock_irq(&rtc_lock);
+ spin_unlock_irq(&rtc_timer_lock);
return 0;
#endif
}
@@ -1282,10 +1300,12 @@
unsigned long freq;
int mod;
- spin_lock_irq (&rtc_lock);
+ spin_lock_irq(&rtc_timer_lock);
+ spin_lock(&rtc_lock);
if (hpet_rtc_dropped_irq()) {
- spin_unlock_irq(&rtc_lock);
+ spin_unlock(&rtc_lock);
+ spin_unlock_irq(&rtc_timer_lock);
return;
}
@@ -1300,9 +1320,10 @@
freq = rtc_freq;
- spin_unlock_irq(&rtc_lock);
+ spin_unlock(&rtc_lock);
if (mod)
mod_timer(&rtc_irq_timer, jiffies + HZ/rtc_freq + 2*HZ/100);
+ spin_unlock_irq(&rtc_timer_lock);
printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n", freq);
[-- Attachment #2: rtc_ioctl.c --]
[-- Type: text/x-csrc, Size: 929 bytes --]
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <unistd.h>
#include <pthread.h>
#include <sched.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <linux/rtc.h>
#define RTC "/dev/rtc"
int run = 1;
#define NR_THREADS 3
void *func(void *dat)
{
int fd = (int)dat;
unsigned long data;
while (run) {
ioctl(fd, RTC_PIE_ON, 0);
read(fd, &data, sizeof(data));
ioctl(fd, RTC_PIE_OFF, 0);
printf("%08lx\n",data);
}
return NULL;
}
int main(int argc, char **argv)
{
int fd;
int i;
pthread_t t[NR_THREADS];
if ((fd = open(RTC, O_RDONLY|O_NONBLOCK)) < 0) {
perror(RTC);
exit(0);
}
ioctl(fd, RTC_IRQP_SET, 1024);
for (i=0; i < NR_THREADS; i++) {
if (pthread_create(&t[i],NULL,func, (void*)fd)) {
perror("pthread_creat");
exit(-1);
}
}
sched_yield();
run = 0;
for (i=0; i < NR_THREADS; i++)
pthread_join(t[i], NULL);
close (fd);
exit(0);
}
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.15-rt1
2006-01-03 18:40 ` 2.6.15-rt1 Steven Rostedt
@ 2006-01-03 18:56 ` Steven Rostedt
2006-01-04 0:01 ` 2.6.15-rt1 Florian Schmidt
0 siblings, 1 reply; 23+ messages in thread
From: Steven Rostedt @ 2006-01-03 18:56 UTC (permalink / raw)
To: Florian Schmidt; +Cc: Ingo Molnar, linux-kernel
On Tue, 2006-01-03 at 13:40 -0500, Steven Rostedt wrote:
[...]
> Ingo, I guess we have a problem. There must be a reason not to hold
> the rtc_lock and call the {add,mod,del}_timer functions, but your change
> only makes the race condition less likely to happen, and not prevent it.
> The attached program run on an SMP machine will eventually trigger the
> race.
>
> $ gcc -o rtc_ioctl rtc_ioctl.c -lpthread
> $ while : ; do ./rtc_ioctl ; done
[...]
> Should we create another lock to protect only the {add,mod,del}_timer?
> Like the following patch?
Well, with the patch, the above program has been running for over ten
minutes without the race occurring. Without the patch, the race happens
in about one minute or less.
-- Steve
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.15-rt1
2006-01-03 9:47 2.6.15-rt1 Ingo Molnar
2006-01-03 11:21 ` 2.6.15-rt1 Michal Piotrowski
2006-01-03 14:33 ` 2.6.15-rt1 Florian Schmidt
@ 2006-01-03 23:12 ` David Brown
2006-01-03 23:29 ` 2.6.15-rt1 David Brown
2006-01-04 2:24 ` 2.6.15-rt1 YOSHIFUJI Hideaki / 吉藤英明
2006-01-05 20:52 ` 2.6.15-rt1 James Cloos
` (2 subsequent siblings)
5 siblings, 2 replies; 23+ messages in thread
From: David Brown @ 2006-01-03 23:12 UTC (permalink / raw)
To: Ingo Molnar; +Cc: linux-kernel
On 1/3/06, Ingo Molnar <mingo@elte.hu> wrote:
> i have released the 2.6.15-rt1 tree, which can be downloaded from the
> usual place:
>
> http://redhat.com/~mingo/realtime-preempt/
>
> no big changes, this release is mainly a merge to v2.6.15, and should
> fix some of the RTC driver problems reported for 2.6.15-rc7-rt3.
>
> to build a 2.6.15-rt1 tree, the following patches should be applied:
>
> http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.15.tar.bz2
> http://redhat.com/~mingo/realtime-preempt/patch-2.6.15-rt1
>
> Ingo
hmm compile problem with this one....
since this is the first time I've tried this patch I don't know how
far back this goes.
CC [M] net/ipv6/icmp.o
CC [M] net/ipv6/mcast.o
net/ipv6/mcast.c: In function `ipv6_sock_mc_join':
net/ipv6/mcast.c:227: error: `RW_LOCK_UNLOCKED' undeclared (first use
in this function)
net/ipv6/mcast.c:227: error: (Each undeclared identifier is reported only once
net/ipv6/mcast.c:227: error: for each function it appears in.)
make[2]: *** [net/ipv6/mcast.o] Error 1
make[1]: *** [net/ipv6] Error 2
make: *** [net] Error 2
- David Brown
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.15-rt1
2006-01-03 23:12 ` 2.6.15-rt1 David Brown
@ 2006-01-03 23:29 ` David Brown
2006-01-04 2:24 ` 2.6.15-rt1 YOSHIFUJI Hideaki / 吉藤英明
1 sibling, 0 replies; 23+ messages in thread
From: David Brown @ 2006-01-03 23:29 UTC (permalink / raw)
To: Ingo Molnar; +Cc: linux-kernel
Oopse forgot to dump my kernel config...
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.15-rt1
# Tue Jan 3 15:27:18 2006
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_LBD=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
# CONFIG_HIGH_RES_TIMERS is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT_DESKTOP is not set
CONFIG_PREEMPT_RT=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_SOFTIRQS=y
CONFIG_PREEMPT_HARDIRQS=y
CONFIG_PREEMPT_BKL=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_STATS=y
CONFIG_ASM_SEMAPHORES=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_TOSHIBA=y
CONFIG_I8K=m
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_HIGHPTE=y
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
# CONFIG_EFI is not set
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_PHYSICAL_START=0x100000
CONFIG_KEXEC=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
CONFIG_PM_DEBUG=y
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_HOTKEY=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_IBM=m
CONFIG_ACPI_TOSHIBA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=m
CONFIG_APM_IGNORE_USER_SUSPEND=y
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
CONFIG_APM_DISPLAY_BLANK=y
CONFIG_APM_RTC_IS_GMT=y
CONFIG_APM_ALLOW_INTS=y
CONFIG_APM_REAL_MODE_POWER_OFF=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K6=m
CONFIG_X86_POWERNOW_K7=m
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y
CONFIG_X86_GX_SUSPMOD=m
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_SMI=m
CONFIG_X86_P4_CLOCKMOD=m
CONFIG_X86_CPUFREQ_NFORCE2=m
CONFIG_X86_LONGRUN=m
CONFIG_X86_LONGHAUL=m
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=m
#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_COMPAQ=m
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
CONFIG_HOTPLUG_PCI_IBM=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
#
# TCP congestion control
#
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
CONFIG_IP_NF_CONNTRACK_NETLINK=m
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_NETBIOS_NS=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_PHYSDEV=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
CONFIG_IP_NF_MATCH_DCCP=m
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_MATCH_STRING=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_TARGET_NFQUEUE=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_PHYSDEV=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_NFQUEUE=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_NET_DIVERT=y
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
#
# Old SIR device drivers
#
CONFIG_IRPORT_SIR=m
#
# Old Serial dongle support
#
CONFIG_DONGLE_OLD=y
CONFIG_ESI_DONGLE_OLD=m
CONFIG_ACTISYS_DONGLE_OLD=m
CONFIG_TEKRAM_DONGLE_OLD=m
CONFIG_GIRBIL_DONGLE_OLD=m
CONFIG_LITELINK_DONGLE_OLD=m
CONFIG_MCP2120_DONGLE_OLD=m
CONFIG_OLD_BELKIN_DONGLE_OLD=m
CONFIG_ACT200L_DONGLE_OLD=m
CONFIG_MA600_DONGLE_OLD=m
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_IEEE80211=m
CONFIG_IEEE80211_DEBUG=y
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_DEBUG_DRIVER=y
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
# CONFIG_MTD_PARTITIONS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_AMDSTD_RETRY=0
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x4000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_SC520CDP=m
# CONFIG_MTD_TS5500 is not set
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_L440GX=m
CONFIG_MTD_PCI=m
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLKMTD=m
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
CONFIG_MTD_DOCPROBE_HIGH=y
CONFIG_MTD_DOCPROBE_55AA=y
#
# NAND Flash Device Drivers
#
CONFIG_MTD_NAND=m
CONFIG_MTD_NAND_VERIFY_WRITE=y
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_OPTI621=m
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_IDEDMA_ONLYDISK=y
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_CY82C693=m
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
# CONFIG_BLK_DEV_CS5535 is not set
CONFIG_BLK_DEV_HPT34X=m
CONFIG_HPT34X_AUTODMA=y
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_IT821X=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_PDC202XX_BURST=y
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_PDC202XX_FORCE=y
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_IVB=y
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_DPT_I2O=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=m
CONFIG_SCSI_SATA_AHCI=m
CONFIG_SCSI_SATA_SVW=m
CONFIG_SCSI_ATA_PIIX=m
# CONFIG_SCSI_SATA_MV is not set
CONFIG_SCSI_SATA_NV=m
# CONFIG_SCSI_PDC_ADMA is not set
CONFIG_SCSI_SATA_QSTOR=m
CONFIG_SCSI_SATA_PROMISE=m
CONFIG_SCSI_SATA_SX4=m
CONFIG_SCSI_SATA_SIL=m
# CONFIG_SCSI_SATA_SIL24 is not set
CONFIG_SCSI_SATA_SIS=m
CONFIG_SCSI_SATA_ULI=m
CONFIG_SCSI_SATA_VIA=m
CONFIG_SCSI_SATA_VITESSE=m
CONFIG_SCSI_SATA_INTEL_COMBINED=y
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_OMIT_FLASHPOINT=y
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
CONFIG_SCSI_IZIP_EPP16=y
CONFIG_SCSI_IZIP_SLOW_CTR=y
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_IOMAPPED=y
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_QLOGIC_FC=m
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA2XXX=y
CONFIG_SCSI_QLA21XX=m
CONFIG_SCSI_QLA22XX=m
CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m
CONFIG_SCSI_QLA6312=m
CONFIG_SCSI_QLA24XX=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_NSP32=m
CONFIG_SCSI_DEBUG=m
#
# PCMCIA SCSI adapter support
#
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID5=m
CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
# CONFIG_IEEE1394_EXPORT_FULL_API is not set
#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_SBP2_PHYS_DMA=y
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m
#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_NET_SB1000=m
#
# ARCnet devices
#
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_PCI=m
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
# CONFIG_ULI526X is not set
CONFIG_PCMCIA_XIRCOM=m
CONFIG_PCMCIA_XIRTULIP=m
CONFIG_HP100=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
# CONFIG_AMD8111E_NAPI is not set
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
CONFIG_B44=m
CONFIG_FORCEDETH=m
CONFIG_DGRS=m
CONFIG_EEPRO100=m
# CONFIG_E100 is not set
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
CONFIG_8139_OLD_RX_RESET=y
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
# CONFIG_R8169_NAPI is not set
CONFIG_R8169_VLAN=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SK98LIN=m
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
CONFIG_S2IO_NAPI=y
#
# Token Ring devices
#
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_ABYSS=m
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
CONFIG_STRIP=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
#
# Wireless 802.11 Frequency Hopping cards support
#
CONFIG_PCMCIA_RAYCS=m
#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_IPW2100=m
# CONFIG_IPW2100_MONITOR is not set
CONFIG_IPW_DEBUG=y
CONFIG_IPW2200=m
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_PCMCIA_WL3501=m
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
CONFIG_HOSTAP=m
# CONFIG_HOSTAP_FIRMWARE is not set
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_ARCNET_COM20020_CS=m
CONFIG_PCMCIA_IBMTR=m
#
# Wan interfaces
#
CONFIG_WAN=y
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_LANMEDIA=m
CONFIG_SYNCLINK_SYNCPPP=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=y
CONFIG_HDLC_RAW_ETH=y
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
CONFIG_HDLC_X25=y
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300=m
CONFIG_PC300_MLPPP=y
CONFIG_FARSYNC=m
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_WAN_ROUTER_DRIVERS=y
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_SBNI=m
CONFIG_SBNI_MULTILINE=y
#
# ATM drivers
#
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_NICSTAR=m
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E_MAYBE=m
CONFIG_ATM_FORE200E_PCA=y
CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_FORE200E=m
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
CONFIG_NETPOLL_RX=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
CONFIG_ISDN=m
#
# Old ISDN4Linux
#
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DRV_LOOP=m
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y
#
# Active cards
#
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
#
# CAPI subsystem
#
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
#
# Active AVM cards
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
#
# Active Eicon DIVA Server cards
#
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
#
# Telephony Support
#
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_TSDEV=m
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_WISTRON_BTNS is not set
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_TIPAR=m
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_I8XX_TCO=m
CONFIG_SC1200_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=m
CONFIG_RTC=m
# CONFIG_RTC_HISTOGRAM is not set
CONFIG_BLOCKER=y
CONFIG_LPPTEST=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_SONYPI=m
#
# Ftape, the floppy tape device driver
#
CONFIG_FTAPE=m
CONFIG_ZFTAPE=m
CONFIG_ZFT_DFLT_BLK_SZ=10240
#
# The compressor will be built as a module only!
#
CONFIG_ZFT_COMPRESSOR=m
CONFIG_FT_NR_BUFFERS=3
CONFIG_FT_PROC_FS=y
CONFIG_FT_NORMAL_DEBUG=y
# CONFIG_FT_FULL_DEBUG is not set
# CONFIG_FT_NO_TRACE is not set
# CONFIG_FT_NO_TRACE_AT_ALL is not set
#
# Hardware configuration
#
CONFIG_FT_STD_FDC=y
# CONFIG_FT_MACH2 is not set
# CONFIG_FT_PROBE_FC10 is not set
# CONFIG_FT_ALT_FDC is not set
CONFIG_FT_FDC_THR=8
CONFIG_FT_FDC_MAX_RATE=2000
CONFIG_FT_ALPHA_CLOCK=0
CONFIG_AGP=m
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
CONFIG_AGP_AMD=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_NVIDIA=m
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=m
CONFIG_AGP_EFFICEON=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
CONFIG_MWAVE=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
#
# TPM devices
#
CONFIG_TCG_TPM=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_SCx200_ACB=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_STUB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m
#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
# CONFIG_SENSORS_PCA9539 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_RTC8564=m
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
CONFIG_W1=m
CONFIG_W1_MATROX=m
CONFIG_W1_DS9490=m
CONFIG_W1_DS9490_BRIDGE=m
CONFIG_W1_THERM=m
CONFIG_W1_SMEM=m
# CONFIG_W1_DS2433 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
CONFIG_HWMON_DEBUG_CHIP=y
#
# Misc devices
#
CONFIG_IBM_ASM=m
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
#
# Video Adapters
#
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_BT848_DVB is not set
# CONFIG_VIDEO_SAA6588 is not set
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_MEYE=m
CONFIG_VIDEO_SAA7134=m
# CONFIG_VIDEO_SAA7134_ALSA is not set
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7134_DVB_ALL_FRONTENDS=y
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DPC=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_DVB_ALL_FRONTENDS=y
# CONFIG_VIDEO_EM28XX is not set
CONFIG_VIDEO_OVCAMCHIP=m
# CONFIG_VIDEO_AUDIO_DECODER is not set
# CONFIG_VIDEO_DECODER is not set
#
# Radio Adapters
#
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=m
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#
# CONFIG_DVB_USB is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
CONFIG_DVB_CINERGYT2_TUNING=y
CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_STV0299=m
CONFIG_DVB_CX24110=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA80XX=m
CONFIG_DVB_MT312=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_S5H1420=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_ATMEL_AT76C651=m
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terresterial DTV) frontends
#
CONFIG_DVB_NXT2002=m
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_VIDEOBUF=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
#
# PCI devices
#
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS4281=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_CA0106=m
CONFIG_SND_KORG1212=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_HDSP=m
# CONFIG_SND_HDSPM is not set
CONFIG_SND_TRIDENT=m
CONFIG_SND_YMFPCI=m
# CONFIG_SND_AD1889 is not set
CONFIG_SND_ALS4000=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VX222=m
CONFIG_SND_HDA_INTEL=m
#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
#
# PCMCIA devices
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
# CONFIG_USB_ACECAD is not set
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_MTOUCH=m
# CONFIG_USB_ITMTOUCH is not set
CONFIG_USB_EGALAX=m
# CONFIG_USB_YEALINK is not set
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
CONFIG_USB_KEYSPAN_REMOTE=m
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB Multimedia devices
#
CONFIG_USB_DABUSB=m
CONFIG_USB_VICAM=m
CONFIG_USB_DSBR=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_W9968CF=m
CONFIG_USB_PWC=m
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=m
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_ZD1201=m
CONFIG_USB_MON=y
#
# USB port drivers
#
CONFIG_USB_USS720=m
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRPRIME=m
# CONFIG_USB_SERIAL_ANYDATA is not set
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
# CONFIG_USB_SERIAL_KEYSPAN is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not set
CONFIG_USB_LD=m
CONFIG_USB_TEST=m
#
# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_XUSBATM=m
#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
CONFIG_USB_GADGET_GOKU=y
CONFIG_USB_GOKU=m
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_GADGET_DUALSPEED is not set
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_FILE_STORAGE_TEST=y
CONFIG_USB_G_SERIAL=m
#
# MMC/SD Card support
#
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_WBSD=m
#
# InfiniBand support
#
CONFIG_INFINIBAND=m
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USER_ACCESS is not set
CONFIG_INFINIBAND_MTHCA=m
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
# CONFIG_INFINIBAND_SRP is not set
#
# SN Devices
#
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS_FS=m
CONFIG_JFFS_FS_VERBOSE=0
# CONFIG_JFFS_PROC_FS is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
# CONFIG_NCPFS_NLS is not set
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
CONFIG_CODA_FS_OLD_API=y
CONFIG_AFS_FS=m
CONFIG_RXRPC=m
CONFIG_9P_FS=m
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_PROFILE_NMI=y
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_PRINTK_IGNORE_LOGLEVEL is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_PARANOID_GENERIC_TIME=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_IRQ_FLAGS=y
CONFIG_WAKEUP_TIMING=y
# CONFIG_WAKEUP_LATENCY_HIST is not set
CONFIG_PREEMPT_TRACE=y
# CONFIG_CRITICAL_PREEMPT_TIMING is not set
# CONFIG_CRITICAL_IRQSOFF_TIMING is not set
CONFIG_LATENCY_TIMING=y
# CONFIG_LATENCY_TRACE is not set
CONFIG_DEBUG_DEADLOCKS=y
# CONFIG_DEBUG_RT_LOCKING_MODE is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_USE_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=m
CONFIG_SECURITY_ROOTPLUG=m
CONFIG_SECURITY_SECLVL=m
# CONFIG_SECURITY_SELINUX is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=y
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
I disabled ipv6 and it seemed to work after that.
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.15-rt1
2006-01-03 18:56 ` 2.6.15-rt1 Steven Rostedt
@ 2006-01-04 0:01 ` Florian Schmidt
2006-01-04 0:24 ` 2.6.15-rt1 Steven Rostedt
0 siblings, 1 reply; 23+ messages in thread
From: Florian Schmidt @ 2006-01-04 0:01 UTC (permalink / raw)
To: Steven Rostedt; +Cc: Ingo Molnar, linux-kernel
On Tue, 03 Jan 2006 13:56:40 -0500
Steven Rostedt <rostedt@goodmis.org> wrote:
> Well, with the patch, the above program has been running for over ten
> minutes without the race occurring. Without the patch, the race happens
> in about one minute or less.
It has yet to show up here, too. Thanks, looks good.
Flo
--
Palimm Palimm!
http://tapas.affenbande.org
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.15-rt1
2006-01-04 0:01 ` 2.6.15-rt1 Florian Schmidt
@ 2006-01-04 0:24 ` Steven Rostedt
2006-01-04 14:31 ` 2.6.15-rt1 Steven Rostedt
0 siblings, 1 reply; 23+ messages in thread
From: Steven Rostedt @ 2006-01-04 0:24 UTC (permalink / raw)
To: Florian Schmidt; +Cc: Ingo Molnar, linux-kernel
On Wed, 4 Jan 2006, Florian Schmidt wrote:
> On Tue, 03 Jan 2006 13:56:40 -0500
> Steven Rostedt <rostedt@goodmis.org> wrote:
>
> > Well, with the patch, the above program has been running for over ten
> > minutes without the race occurring. Without the patch, the race happens
> > in about one minute or less.
>
> It has yet to show up here, too. Thanks, looks good.
>
I have yet to stop my test, and it has been running for over three hours
now. So I believe that this fixes that race.
Ingo, do you see any problems with the patch?
-- Steve
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.15-rt1
2006-01-03 23:12 ` 2.6.15-rt1 David Brown
2006-01-03 23:29 ` 2.6.15-rt1 David Brown
@ 2006-01-04 2:24 ` YOSHIFUJI Hideaki / 吉藤英明
2006-01-04 7:16 ` 2.6.15-rt1 David Brown
1 sibling, 1 reply; 23+ messages in thread
From: YOSHIFUJI Hideaki / 吉藤英明 @ 2006-01-04 2:24 UTC (permalink / raw)
To: dmlb2000, mingo; +Cc: linux-kernel, yoshfuji
Hello.
In article <9c21eeae0601031512m44c4a269ua2214528eaf90914@mail.gmail.com> (at Tue, 3 Jan 2006 15:12:50 -0800), David Brown <dmlb2000@gmail.com> says:
> CC [M] net/ipv6/icmp.o
> CC [M] net/ipv6/mcast.o
> net/ipv6/mcast.c: In function `ipv6_sock_mc_join':
> net/ipv6/mcast.c:227: error: `RW_LOCK_UNLOCKED' undeclared (first use
> in this function)
> net/ipv6/mcast.c:227: error: (Each undeclared identifier is reported only once
> net/ipv6/mcast.c:227: error: for each function it appears in.)
> make[2]: *** [net/ipv6/mcast.o] Error 1
> make[1]: *** [net/ipv6] Error 2
> make: *** [net] Error 2
This patch should fix compilation issues in net/ipv6 subsystem
w/ rt patch.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index f829a4a..15264f4 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -224,7 +224,7 @@ int ipv6_sock_mc_join(struct sock *sk, i
mc_lst->ifindex = dev->ifindex;
mc_lst->sfmode = MCAST_EXCLUDE;
- mc_lst->sflock = RW_LOCK_UNLOCKED;
+ mc_lst->sflock = RW_LOCK_UNLOCKED(mc_lst->sflock);
mc_lst->sflist = NULL;
/*
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index c2c52af..bfd7a2b 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -98,7 +98,7 @@ struct nf_ct_frag6_queue
#define FRAG6Q_HASHSZ 64
static struct nf_ct_frag6_queue *nf_ct_frag6_hash[FRAG6Q_HASHSZ];
-static rwlock_t nf_ct_frag6_lock = RW_LOCK_UNLOCKED;
+static rwlock_t nf_ct_frag6_lock = RW_LOCK_UNLOCKED(nf_ct_frag6_lock);
static u32 nf_ct_frag6_hash_rnd;
static LIST_HEAD(nf_ct_frag6_lru_list);
int nf_ct_frag6_nqueues = 0;
@@ -371,7 +371,7 @@ nf_ct_frag6_create(unsigned int hash, u3
init_timer(&fq->timer);
fq->timer.function = nf_ct_frag6_expire;
fq->timer.data = (long) fq;
- fq->lock = SPIN_LOCK_UNLOCKED;
+ fq->lock = SPIN_LOCK_UNLOCKED(fq->lock);
atomic_set(&fq->refcnt, 1);
return nf_ct_frag6_intern(hash, fq);
--
YOSHIFUJI Hideaki @ USAGI Project <yoshfuji@linux-ipv6.org>
GPG-FP : 9022 65EB 1ECF 3AD1 0BDF 80D8 4807 F894 E062 0EEA
^ permalink raw reply related [flat|nested] 23+ messages in thread
* Re: 2.6.15-rt1
2006-01-04 2:24 ` 2.6.15-rt1 YOSHIFUJI Hideaki / 吉藤英明
@ 2006-01-04 7:16 ` David Brown
2006-01-04 7:43 ` 2.6.15-rt1 YOSHIFUJI Hideaki / 吉藤英明
0 siblings, 1 reply; 23+ messages in thread
From: David Brown @ 2006-01-04 7:16 UTC (permalink / raw)
To: YOSHIFUJI Hideaki / 吉藤英明; +Cc: mingo, linux-kernel
> This patch should fix compilation issues in net/ipv6 subsystem
> w/ rt patch.
>
> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
>
> diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
> index f829a4a..15264f4 100644
> --- a/net/ipv6/mcast.c
> +++ b/net/ipv6/mcast.c
> @@ -224,7 +224,7 @@ int ipv6_sock_mc_join(struct sock *sk, i
>
> mc_lst->ifindex = dev->ifindex;
> mc_lst->sfmode = MCAST_EXCLUDE;
> - mc_lst->sflock = RW_LOCK_UNLOCKED;
> + mc_lst->sflock = RW_LOCK_UNLOCKED(mc_lst->sflock);
> mc_lst->sflist = NULL;
>
> /*
> diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
> index c2c52af..bfd7a2b 100644
> --- a/net/ipv6/netfilter/nf_conntrack_reasm.c
> +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
> @@ -98,7 +98,7 @@ struct nf_ct_frag6_queue
> #define FRAG6Q_HASHSZ 64
>
> static struct nf_ct_frag6_queue *nf_ct_frag6_hash[FRAG6Q_HASHSZ];
> -static rwlock_t nf_ct_frag6_lock = RW_LOCK_UNLOCKED;
> +static rwlock_t nf_ct_frag6_lock = RW_LOCK_UNLOCKED(nf_ct_frag6_lock);
> static u32 nf_ct_frag6_hash_rnd;
> static LIST_HEAD(nf_ct_frag6_lru_list);
> int nf_ct_frag6_nqueues = 0;
> @@ -371,7 +371,7 @@ nf_ct_frag6_create(unsigned int hash, u3
> init_timer(&fq->timer);
> fq->timer.function = nf_ct_frag6_expire;
> fq->timer.data = (long) fq;
> - fq->lock = SPIN_LOCK_UNLOCKED;
> + fq->lock = SPIN_LOCK_UNLOCKED(fq->lock);
> atomic_set(&fq->refcnt, 1);
>
> return nf_ct_frag6_intern(hash, fq);
>
> --
Thanks and the patch worked fine, but I have a question about the
patch submitted to the url...
I created a new patch with the included ipv6 subsystem fix but I'm
getting a smaller patch than what is posted on the website.
$ wc -l patch-2.6.15-rt1
57869 patch-2.6.15-rt1
$ wc -l patch-2.6.15-rt1-1
57156 patch-2.6.15-rt1-1
patch-2.6.15-rt1-1 has the ipv6 patch yet is smaller than the initial
patch. I created the patch using:
$ diff -uprN linux-2.6.15 linux-2.6.15-rt1 > patch-2.6.15-rt1-1
Is this not the way you did it? I noticed different headers in my
patch vs. the patch posted. Really I'm concerned about missing
anything in the patch, considering it's 700+ lines smaller.
- David Brown
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.15-rt1
2006-01-04 7:16 ` 2.6.15-rt1 David Brown
@ 2006-01-04 7:43 ` YOSHIFUJI Hideaki / 吉藤英明
2006-01-04 7:50 ` 2.6.15-rt1 David Brown
0 siblings, 1 reply; 23+ messages in thread
From: YOSHIFUJI Hideaki / 吉藤英明 @ 2006-01-04 7:43 UTC (permalink / raw)
To: dmlb2000; +Cc: yoshfuji, mingo, linux-kernel
In article <9c21eeae0601032316l3259fbecle6a0b290ed244e12@mail.gmail.com> (at Tue, 3 Jan 2006 23:16:02 -0800), David Brown <dmlb2000@gmail.com> says:
> patch-2.6.15-rt1-1 has the ipv6 patch yet is smaller than the initial
> patch. I created the patch using:
> $ diff -uprN linux-2.6.15 linux-2.6.15-rt1 > patch-2.6.15-rt1-1
>
> Is this not the way you did it? I noticed different headers in my
> patch vs. the patch posted. Really I'm concerned about missing
> anything in the patch, considering it's 700+ lines smaller.
I have linux-2.6 git tree and I did something like this:
$ cd linux-2.6
$ patch -p1 < /tmp/patch-2.6.15-rt1
hack, hack, hack...
$ patch -p1 -R < /tmp/patch-2.6.15-rt1
$ git reset
$ git diff
--yoshfuji
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.15-rt1
2006-01-04 7:43 ` 2.6.15-rt1 YOSHIFUJI Hideaki / 吉藤英明
@ 2006-01-04 7:50 ` David Brown
2006-01-04 21:01 ` 2.6.15-rt1 Willy Tarreau
0 siblings, 1 reply; 23+ messages in thread
From: David Brown @ 2006-01-04 7:50 UTC (permalink / raw)
To: YOSHIFUJI Hideaki / 吉藤英明; +Cc: mingo, linux-kernel
> I have linux-2.6 git tree and I did something like this:
>
> $ cd linux-2.6
> $ patch -p1 < /tmp/patch-2.6.15-rt1
> hack, hack, hack...
> $ patch -p1 -R < /tmp/patch-2.6.15-rt1
> $ git reset
> $ git diff
Thanks again, this reminds me that I'm going to have to make a serious
effort to learn how to use git.
- David Brown
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.15-rt1
2006-01-04 0:24 ` 2.6.15-rt1 Steven Rostedt
@ 2006-01-04 14:31 ` Steven Rostedt
0 siblings, 0 replies; 23+ messages in thread
From: Steven Rostedt @ 2006-01-04 14:31 UTC (permalink / raw)
To: Florian Schmidt; +Cc: linux-kernel, Ingo Molnar
On Tue, 2006-01-03 at 19:24 -0500, Steven Rostedt wrote:
> On Wed, 4 Jan 2006, Florian Schmidt wrote:
>
> > On Tue, 03 Jan 2006 13:56:40 -0500
> > Steven Rostedt <rostedt@goodmis.org> wrote:
> >
> > > Well, with the patch, the above program has been running for over ten
> > > minutes without the race occurring. Without the patch, the race happens
> > > in about one minute or less.
> >
> > It has yet to show up here, too. Thanks, looks good.
> >
>
> I have yet to stop my test, and it has been running for over three hours
> now. So I believe that this fixes that race.
>
I let the test run all night, and it didn't bug once.
-- Steve
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.15-rt1
2006-01-04 7:50 ` 2.6.15-rt1 David Brown
@ 2006-01-04 21:01 ` Willy Tarreau
0 siblings, 0 replies; 23+ messages in thread
From: Willy Tarreau @ 2006-01-04 21:01 UTC (permalink / raw)
To: David Brown; +Cc: YOSHIFUJI Hideaki / ?$B5HF#1QL@, mingo, linux-kernel
On Tue, Jan 03, 2006 at 11:50:52PM -0800, David Brown wrote:
> > I have linux-2.6 git tree and I did something like this:
> >
> > $ cd linux-2.6
> > $ patch -p1 < /tmp/patch-2.6.15-rt1
> > hack, hack, hack...
> > $ patch -p1 -R < /tmp/patch-2.6.15-rt1
> > $ git reset
> > $ git diff
>
> Thanks again, this reminds me that I'm going to have to make a serious
> effort to learn how to use git.
"serious" is the appropriate word here :-)
BTW, if you want to know what has changed between the original patch
and yours, you can use interdiff from diffutils. It will give you a
patch between what the trees you would get by applying your patches.
It's very useful for such usages !
> - David Brown
Regards,
Willy
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.15-rt1
2006-01-03 9:47 2.6.15-rt1 Ingo Molnar
` (2 preceding siblings ...)
2006-01-03 23:12 ` 2.6.15-rt1 David Brown
@ 2006-01-05 20:52 ` James Cloos
2006-01-05 21:00 ` 2.6.15-rt1 David Brown
2006-01-10 22:17 ` 2.6.15-rt1 Esben Stien
2006-01-11 10:16 ` 2.6.15-rt1 Esben Stien
5 siblings, 1 reply; 23+ messages in thread
From: James Cloos @ 2006-01-05 20:52 UTC (permalink / raw)
To: Ingo Molnar; +Cc: linux-kernel
I get this compiling 15-rt1:
,----
| CC net/ipv6/mcast.o
| net/ipv6/mcast.c: In function `ipv6_sock_mc_join':
| net/ipv6/mcast.c:227: error: `RW_LOCK_UNLOCKED' undeclared (first use in this function)
| net/ipv6/mcast.c:227: error: (Each undeclared identifier is reported only once
| net/ipv6/mcast.c:227: error: for each function it appears in.)
| make[2]: *** [net/ipv6/mcast.o] Error 1
`----
I take it something on the order of this is needed?:
- mc_lst->sflock = RW_LOCK_UNLOCKED;
+ mc_lst->sflock = RW_LOCK_UNLOCKED(foo.bar);
for some foo.bar, yes?
Or is it?:
- mc_lst->sflock = RW_LOCK_UNLOCKED;
+ rwlock_init(mc_lst->sflock);
I'm trying the latter now, but won't be able to reboot for
a runtime test for a while....
-JimC
--
James H. Cloos, Jr. <cloos@jhcloos.com>
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.15-rt1
2006-01-05 20:52 ` 2.6.15-rt1 James Cloos
@ 2006-01-05 21:00 ` David Brown
0 siblings, 0 replies; 23+ messages in thread
From: David Brown @ 2006-01-05 21:00 UTC (permalink / raw)
To: James Cloos; +Cc: Ingo Molnar, linux-kernel
> I get this compiling 15-rt1:
>
> ,----
> | CC net/ipv6/mcast.o
> | net/ipv6/mcast.c: In function `ipv6_sock_mc_join':
> | net/ipv6/mcast.c:227: error: `RW_LOCK_UNLOCKED' undeclared (first use in this function)
> | net/ipv6/mcast.c:227: error: (Each undeclared identifier is reported only once
> | net/ipv6/mcast.c:227: error: for each function it appears in.)
> | make[2]: *** [net/ipv6/mcast.o] Error 1
> `----
>
> I take it something on the order of this is needed?:
>
> - mc_lst->sflock = RW_LOCK_UNLOCKED;
> + mc_lst->sflock = RW_LOCK_UNLOCKED(foo.bar);
>
> for some foo.bar, yes?
>
> Or is it?:
>
> - mc_lst->sflock = RW_LOCK_UNLOCKED;
> + rwlock_init(mc_lst->sflock);
>
> I'm trying the latter now, but won't be able to reboot for
> a runtime test for a while....
>
Take a look at the 15-rt1-sr1 patch it has a fix for this
there was also a fix posted earlier in the thread :)
and its:
- mc_lst->sflock = RW_LOCK_UNLOCKED;
+ mc_lst->sflock = RW_LOCK_UNLOCKED(mc_list->fslock);
- David Brown
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.15-rt1
2006-01-03 9:47 2.6.15-rt1 Ingo Molnar
` (3 preceding siblings ...)
2006-01-05 20:52 ` 2.6.15-rt1 James Cloos
@ 2006-01-10 22:17 ` Esben Stien
2006-01-11 3:09 ` 2.6.15-rt1 Steven Rostedt
2006-01-11 10:16 ` 2.6.15-rt1 Esben Stien
5 siblings, 1 reply; 23+ messages in thread
From: Esben Stien @ 2006-01-10 22:17 UTC (permalink / raw)
To: linux-kernel
Ingo Molnar <mingo@elte.hu> writes:
> i have released the 2.6.15-rt1 tree
Didn't see any release announcement for 2.6.15-rt3, so I post here.
I've booted up rt3 and got this:
[drm] Loading R200 Microcode
check_monotonic_clock: monotonic inconsistency detected!
from 157c03cbfc9 (1476398989257) to 157c03ca8f6 (1476398983414).
softirq-hrtimer/8[CPU#0]: BUG in check_monotonic_clock at kernel/time/timeofday.c:160
[<c0112555>] __WARN_ON+0x40/0x5f (8)
[<c012701a>] check_monotonic_clock+0x64/0x9a (48)
[<c01273c7>] get_monotonic_clock+0xb5/0xe8 (32)
[<c0124d95>] hrtimer_forward+0x2b/0xd6 (64)
[<c011ae6a>] group_send_sig_info+0xb1/0xd3 (12)
[<c0114e88>] it_real_fn+0x0/0x42 (40)
[<c0114ec2>] it_real_fn+0x3a/0x42 (4)
[<c01253c2>] run_hrtimer_softirq+0x7d/0xe8 (24)
[<c01161e3>] ksoftirqd+0xce/0x139 (32)
[<c0116115>] ksoftirqd+0x0/0x139 (40)
[<c01223f2>] kthread+0x79/0xa3 (4)
[<c0122379>] kthread+0x0/0xa3 (24)
[<c0100db9>] kernel_thread_helper+0x5/0xb (16)
I'm also, for some reason, unable to get my Logitech MX1000 mouse to
work in xorg-6.8.1 here, through evdev. I changed my config file to
use normal /dev/psaux as a temporary solution. I'm coming from
linux-2.6.14-rt22 where everything related is working fine. No
software has changed.
I run my own distro.
Here's the relevant part of xorg configuration:
Section "InputDevice" # Logitech MX1000
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "evdev"
Option "Dev Name" "Logitech USB Receiver"
Option "Dev Phys" "usb-0000:00:1d.0-1/input0"
Option "Device" "/dev/input/mice"
Option "Buttons" "12"
Option "ZAxisMapping" "11 12 10 9"
Option "Emulate3Buttons" "false"
Option "Resolution" "800"
Option "SampleRate" "800"
EndSection
This worked when I used (Option "Device" "/dev/psaux"). Then it is
bypassing the evdev system. The /dev/input/mice is present on the
system, though.
Here are some data about me:
Linux version 2.6.15-rt3 (b0ef@quasar) (gcc version 3.4.2) #1 PREEMPT Tue Jan 10 08:28:48 CET 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000005fef0000 (usable)
BIOS-e820: 000000005fef0000 - 000000005fefb000 (ACPI data)
BIOS-e820: 000000005fefb000 - 000000005ff00000 (ACPI NVS)
BIOS-e820: 000000005ff00000 - 000000005ff80000 (usable)
BIOS-e820: 000000005ff80000 - 0000000060000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
639MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 393088
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 163712 pages, LIFO batch:31
DMI present.
Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000)
Detected 2394.068 MHz processor.
Real-Time Preemption Support (C) 2004-2005 Ingo Molnar
Built 1 zonelists
Kernel command line: root=/dev/sda1
Initializing CPU#0
WARNING: experimental RCU implementation.
PID hash table entries: 4096 (order: 12, 65536 bytes)
Event source pit installed with caps set: 07
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1555004k/1572352k available (2451k kernel code, 16896k reserved, 865k data, 132k init, 654784k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4789.85 BogoMIPS (lpj=2394925)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
mtrr: v2.0 (20020519)
CPU: Intel(R) Celeron(R) CPU 2.40GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd987, last bus=3
PCI: Using configuration type 1
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI quirk: region f000-f07f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region f180-f1bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/24d0] at 0000:00:1f.0
PCI: IRQ 0 for device 0000:00:1f.2 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 7 for device 0000:00:1f.2
PCI: Sharing IRQ 7 with 0000:00:1d.2
PCI: Bridge: 0000:00:01.0
IO window: 3000-3fff
MEM window: c0000000-c00fffff
PREFETCH window: e0000000-efffffff
PCI: Bridge: 0000:00:1e.0
IO window: 4000-4fff
MEM window: c0100000-c01fffff
PREFETCH window: 70000000-700fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1136913723.097:1): initialized
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.25 [Flags: R/O].
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Time: tsc clocksource has been installed.
hrtimers: Switched to high resolution mode CPU 0
lp: driver loaded but no devices found
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 865 Chipset.
agpgart: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.0.0 20040925
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 10 for device 0000:03:05.0
eth0: RealTek RTL-8029 found at 0x4000, IRQ 10, 52:54:00:DF:C7:EB.
e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
PCI: Found IRQ 10 for device 0000:03:08.0
e100: eth1: e100_probe: addr 0xc0110000, irq 10, MAC addr 00:30:05:4F:61:E1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
ide1: I/O resource 0x170-0x177 not free.
ide1: ports already in use, skipping probe
libata version 1.20 loaded.
ata_piix 0000:00:1f.2: version 1.05
ata_piix 0000:00:1f.2: combined mode detected (p=0, s=1)
PCI: Found IRQ 7 for device 0000:00:1f.2
PCI: Sharing IRQ 7 with 0000:00:1d.2
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0x2400 irq 14
ata1: disabling port
scsi0 : ata_piix
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2408 irq 15
ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4673 85:7c69 86:3e01 87:4663 88:407f
ata2: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48
ata2: dev 0 configured for UDMA/133
scsi1 : ata_piix
Vendor: ATA Model: Maxtor 6L300S0 Rev: BANC
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2
sd 1:0:0:0: Attached scsi disk sda
sd 1:0:0:0: Attached scsi generic sg0 type 0
ieee1394: raw1394: /dev/raw1394 device initialized
usbmon: debugfs is not available
USB Universal Host Controller Interface driver v2.3
PCI: Found IRQ 10 for device 0000:00:1d.0
PCI: Sharing IRQ 10 with 0000:00:1d.3
PCI: Sharing IRQ 10 with 0000:01:00.0
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 7 for device 0000:00:1d.1
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 7, io base 0x00001400
usb 1-1: new low speed USB device using uhci_hcd and address 2
usb 1-2: new full speed USB device using uhci_hcd and address 3
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-2.2: new full speed USB device using uhci_hcd and address 4
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Found IRQ 7 for device 0000:00:1d.2
PCI: Sharing IRQ 7 with 0000:00:1f.2
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 7, io base 0x00001800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Found IRQ 10 for device 0000:00:1d.3
PCI: Sharing IRQ 10 with 0000:00:1d.0
PCI: Sharing IRQ 10 with 0000:01:00.0
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 10, io base 0x00001c00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
input: Logitech USB Receiver as /class/input/input0
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
Advanced Linux Sound Architecture Driver Version 1.0.10rc3 (Mon Nov 07 13:30:21 2005 UTC).
ALSA device list:
No soundcards found.
oprofile: using timer interrupt.
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 65536 (order: 9, 2359296 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 212 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ReiserFS: sda1: found reiserfs format "3.6" with standard journal
input: AT Translated Set 2 keyboard as /class/input/input1
ReiserFS: sda1: using ordered data mode
ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda1: checking transaction log (sda1)
ReiserFS: sda1: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 132k freed
Adding 3879688k swap on /dev/sda2. Priority:1 extents:1 across:3879688k
PCI: Found IRQ 9 for device 0000:03:07.0
Hammerfall-DSP: Firmware already present, initializing card.
usbcore: registered new driver snd-usb-audio
do_settimeofday() was called!
e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex
PCI: Found IRQ 10 for device 0000:01:00.0
PCI: Sharing IRQ 10 with 0000:00:1d.0
PCI: Sharing IRQ 10 with 0000:00:1d.3
[drm] Initialized radeon 1.19.0 20050911 on minor 0:
mtrr: 0xe0000000,0x10000000 overlaps existing 0xe0000000,0x8000000
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: reserved bits set (4) in mode 0x1f004a0f. Fixed.
agpgart: X tried to set rate=x12. Setting to AGP3 x8 mode.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[drm] Loading R200 Microcode
check_monotonic_clock: monotonic inconsistency detected!
from 157c03cbfc9 (1476398989257) to 157c03ca8f6 (1476398983414).
softirq-hrtimer/8[CPU#0]: BUG in check_monotonic_clock at kernel/time/timeofday.c:160
[<c0112555>] __WARN_ON+0x40/0x5f (8)
[<c012701a>] check_monotonic_clock+0x64/0x9a (48)
[<c01273c7>] get_monotonic_clock+0xb5/0xe8 (32)
[<c0124d95>] hrtimer_forward+0x2b/0xd6 (64)
[<c011ae6a>] group_send_sig_info+0xb1/0xd3 (12)
[<c0114e88>] it_real_fn+0x0/0x42 (40)
[<c0114ec2>] it_real_fn+0x3a/0x42 (4)
[<c01253c2>] run_hrtimer_softirq+0x7d/0xe8 (24)
[<c01161e3>] ksoftirqd+0xce/0x139 (32)
[<c0116115>] ksoftirqd+0x0/0x139 (40)
[<c01223f2>] kthread+0x79/0xa3 (4)
[<c0122379>] kthread+0x0/0xa3 (24)
[<c0100db9>] kernel_thread_helper+0x5/0xb (16)
I: Bus=0003 Vendor=046d Product=c50e Version=2500
N: Name="Logitech USB Receiver"
P: Phys=usb-0000:00:1d.0-1/input0
S: Sysfs=/class/input/input0
H: Handlers=mouse0 event0
B: EV=7
B: KEY=ffff0000 0 0 0 0 0 0 0 0
B: REL=143
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/class/input/input1
H: Handlers=kbd event1
B: EV=120013
B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7
PCI devices found:
Bus 0, device 0, function 0:
Class 0600: PCI device 8086:2570 (rev 2).
Prefetchable 32 bit memory at 0xd0000000 [0xdfffffff].
Bus 0, device 1, function 0:
Class 0604: PCI device 8086:2571 (rev 2).
Master Capable. Latency=176. Min Gnt=13.
Bus 0, device 29, function 0:
Class 0c03: PCI device 8086:24d2 (rev 2).
IRQ 10.
I/O at 0x1000 [0x101f].
Bus 0, device 29, function 1:
Class 0c03: PCI device 8086:24d4 (rev 2).
IRQ 7.
I/O at 0x1400 [0x141f].
Bus 0, device 29, function 2:
Class 0c03: PCI device 8086:24d7 (rev 2).
IRQ 7.
I/O at 0x1800 [0x181f].
Bus 0, device 29, function 3:
Class 0c03: PCI device 8086:24de (rev 2).
IRQ 10.
I/O at 0x1c00 [0x1c1f].
Bus 0, device 30, function 0:
Class 0604: PCI device 8086:244e (rev 194).
Master Capable. No bursts. Min Gnt=7.
Bus 0, device 31, function 0:
Class 0601: PCI device 8086:24d0 (rev 2).
Bus 0, device 31, function 2:
Class 0101: PCI device 8086:24d1 (rev 2).
IRQ 7.
I/O at 0x2400 [0x240f].
Bus 0, device 31, function 3:
Class 0c05: PCI device 8086:24d3 (rev 2).
IRQ 4.
I/O at 0x2000 [0x201f].
Bus 1, device 0, function 0:
Class 0300: PCI device 1002:5960 (rev 1).
IRQ 10.
Master Capable. Latency=176. Min Gnt=8.
Prefetchable 32 bit memory at 0xe0000000 [0xefffffff].
I/O at 0x3000 [0x30ff].
Non-prefetchable 32 bit memory at 0xc0000000 [0xc000ffff].
Bus 3, device 5, function 0:
Class 0200: PCI device 10ec:8029 (rev 0).
IRQ 10.
I/O at 0x4000 [0x401f].
Bus 3, device 7, function 0:
Class 0401: PCI device 10ee:3fc5 (rev 50).
IRQ 9.
Master Capable. Latency=255.
Non-prefetchable 32 bit memory at 0xc0100000 [0xc010ffff].
Bus 3, device 8, function 0:
Class 0200: PCI device 8086:1051 (rev 2).
IRQ 10.
Master Capable. Latency=176. Min Gnt=8.Max Lat=56.
Non-prefetchable 32 bit memory at 0xc0110000 [0xc0110fff].
I/O at 0x4400 [0x443f].
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15-rt3 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.3
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15-rt3 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15-rt3 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc=129/900 us (14%), #Int= 2, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15-rt3 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c50e Rev=25.00
S: Manufacturer=Logitech
S: Product=USB Receiver
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 70mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0409 ProdID=0059 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=02 Prnt=03 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1397 ProdID=00bc Rev= 1.00
S: Manufacturer=BEHRINGER
S: Product=BCF2000
C:* #Ifs= 2 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=snd-usb-audio
I: If#= 1 Alt= 0 #EPs= 2 Cls=01(audio) Sub=03 Prot=00 Driver=snd-usb-audio
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 4 Ivl=0ms
# dmidecode 2.6
SMBIOS 2.31 present.
87 structures occupying 2189 bytes.
Table at 0x000F03A0.
Handle 0x0000
DMI type 0, 20 bytes.
BIOS Information
Vendor: FUJITSU SIEMENS // Phoenix Technologies Ltd.
Version: 4.06 Rev. 1.09.1561
Release Date: 04/23/2004
Address: 0xE5690
Runtime Size: 108912 bytes
ROM Size: 512 kB
Characteristics:
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
5.25"/360 KB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Handle 0x0001
DMI type 1, 25 bytes.
System Information
Manufacturer: FUJITSU SIEMENS
Product Name: SCENIC P / SCENICO P
Version:
Serial Number: YBEM389365
UUID: D0DB43CC-E8AE-11D7-A847-F635F11A2CF7
Wake-up Type: Power Switch
Handle 0x0002
DMI type 2, 8 bytes.
Base Board Information
Manufacturer: FUJITSU SIEMENS
Product Name: D1561
Version: S26361-D1561
Serial Number:
Handle 0x0003
DMI type 3, 17 bytes.
Chassis Information
Manufacturer: FUJITSU SIEMENS
Type: Mini Tower
Lock: Present
Version: SCEP
Serial Number: YBEM389365
Asset Tag: YBEM389365
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Handle 0x0004
DMI type 4, 35 bytes.
Processor Information
Socket Designation: CPU
Type: Central Processor
Family: Celeron
Manufacturer: Intel
ID: 29 0F 00 00 FF FB EB BF
Signature: Type 0, Family 15, Model 2, Stepping 9
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Hyper-threading technology)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel Celeron(R)
Voltage: 3.3 V
External Clock: 400 MHz
Max Speed: 2400 MHz
Current Speed: 2400 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: 0x0007
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0005
DMI type 7, 19 bytes.
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Through
Location: Internal
Installed Size: 8 KB
Maximum Size: 32 KB
Supported SRAM Types:
Burst
Synchronous
Installed SRAM Type: Burst Synchronous
Speed: Unknown
Error Correction Type: Parity
System Type: Data
Associativity: Other
Handle 0x0006
DMI type 7, 19 bytes.
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 128 KB
Maximum Size: 1024 KB
Supported SRAM Types:
Burst
Pipeline Burst
Synchronous
Asynchronous
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Unknown
System Type: Unified
Associativity: Other
Handle 0x0007
DMI type 7, 19 bytes.
Cache Information
Socket Designation: L3 Cache
Configuration: Disabled, Not Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 0 KB
Maximum Size: 16384 KB
Supported SRAM Types:
Burst
Pipeline Burst
Synchronous
Asynchronous
Installed SRAM Type: None
Speed: Unknown
Error Correction Type: Unknown
System Type: Unified
Associativity: Other
Handle 0x0008
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: SMsC
Internal Connector Type: None
External Reference Designator: PS/2 Mouse
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0009
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: SMsC
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x000A
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: SMsC
Internal Connector Type: None
External Reference Designator: Parallel
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP
Handle 0x000B
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: SMsC
Internal Connector Type: None
External Reference Designator: Serial-1
External Connector Type: DB-9 male
Port Type: Serial Port 16550 Compatible
Handle 0x000C
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: SMsC
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator: Serial-2
External Connector Type: None
Port Type: Serial Port 16550 Compatible
Handle 0x000D
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: SMsC
Internal Connector Type: On Board Floppy
External Reference Designator: Floppy
External Connector Type: None
Port Type: None
Handle 0x000E
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: On Board IDE
External Reference Designator: Primary IDE
External Connector Type: None
Port Type: None
Handle 0x000F
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: On Board IDE
External Reference Designator: Secondary IDE
External Connector Type: None
Port Type: None
Handle 0x0010
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: Other
External Reference Designator: SATA-1
External Connector Type: None
Port Type: None
Handle 0x0011
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: Other
External Reference Designator: SATA-2
External Connector Type: None
Port Type: None
Handle 0x0012
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: None
External Reference Designator: USB-1
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0013
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: None
External Reference Designator: USB-2
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0014
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: None
External Reference Designator: USB-3
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0015
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: None
External Reference Designator: USB-4
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0016
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: None
External Reference Designator: USB-5
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0017
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: None
External Reference Designator: USB-6
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0018
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator: USB-7
External Connector Type: None
Port Type: USB
Handle 0x0019
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator: USB-8
External Connector Type: None
Port Type: USB
Handle 0x001A
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Intel 865G
Internal Connector Type: None
External Reference Designator: Video
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x001B
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: INTEL 82562EZ
Internal Connector Type: None
External Reference Designator: LAN
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x001C
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: AD1980
Internal Connector Type: None
External Reference Designator: Rear: Line-In
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x001D
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: AD1980
Internal Connector Type: None
External Reference Designator: Rear: Line-Out
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x001E
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: AD1980
Internal Connector Type: None
External Reference Designator: Rear: Mic-In
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x001F
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: AD1980
Internal Connector Type: None
External Reference Designator: Front: Mic-In
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0020
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: AD1980
Internal Connector Type: None
External Reference Designator: Front: Line-Out
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0021
DMI type 9, 13 bytes.
System Slot Information
Designation: AGP
Type: 32-bit AGP 4x
Current Usage: In Use
Length: Long
ID: 1
Characteristics:
PME signal is supported
Handle 0x0022
DMI type 9, 13 bytes.
System Slot Information
Designation: PCI-1
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 2
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0023
DMI type 9, 13 bytes.
System Slot Information
Designation: PCI-2
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 3
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0024
DMI type 9, 13 bytes.
System Slot Information
Designation: PCI-3
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 4
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0025
DMI type 10, 12 bytes.
On Board Device 1 Information
Type: Other
Status: Disabled
Description: SMsC SuperI/O
On Board Device 2 Information
Type: Sound
Status: Disabled
Description: AD1980
On Board Device 3 Information
Type: Ethernet
Status: Disabled
Description: Intel 82562EZ
On Board Device 4 Information
Type: Video
Status: Disabled
Description: Intel 865G
Handle 0x0026
DMI type 11, 5 bytes.
OEM Strings
String 1: FUJITSU SIEMENS
String 2: FUJITSU SIEMENS SYSTEM
Handle 0x0027
DMI type 12, 5 bytes.
System Configuration Options
Option 1: J1-3: Default position
Option 2: J1-2: Reserved
Option 3: J5-6: Recovery BIOS active
Handle 0x0028
DMI type 16, 15 bytes.
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 4 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x0029
DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x0028
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: Slot-1
Bank Locator: Channel A
Type: DDR
Type Detail: Synchronous
Speed: 266 MHz (3.8 ns)
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x002A
DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x0028
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: Slot-3
Bank Locator: Channel A
Type: DDR
Type Detail: Synchronous
Speed: 266 MHz (3.8 ns)
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x002B
DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x0028
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: Slot-2
Bank Locator: Channel B
Type: DDR
Type Detail: Synchronous
Speed: 266 MHz (3.8 ns)
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x002C
DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x0028
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: Slot-4
Bank Locator: Channel B
Type: DDR
Type Detail: Synchronous
Speed: 266 MHz (3.8 ns)
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x002D
DMI type 19, 15 bytes.
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000600003FF
Range Size: 1572865 kB
Physical Array Handle: 0x0028
Partition Width: 0
Handle 0x002E
DMI type 20, 19 bytes.
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0001FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x0029
Memory Array Mapped Address Handle: 0x002D
Partition Row Position: 1
Handle 0x002F
DMI type 20, 19 bytes.
Memory Device Mapped Address
Starting Address: 0x00020000000
Ending Address: 0x0003FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x002A
Memory Array Mapped Address Handle: 0x002D
Partition Row Position: 1
Handle 0x0030
DMI type 20, 19 bytes.
Memory Device Mapped Address
Starting Address: 0x00040000000
Ending Address: 0x0005FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x002B
Memory Array Mapped Address Handle: 0x002D
Partition Row Position: 1
Handle 0x0031
DMI type 20, 19 bytes.
Memory Device Mapped Address
Starting Address: 0x0005FFFFC00
Ending Address: 0x0005FFFFFFF
Range Size: 1 kB
Physical Device Handle: 0x002C
Memory Array Mapped Address Handle: 0x002D
Partition Row Position: 1
Handle 0x0032
DMI type 32, 11 bytes.
System Boot Information
Status: No errors detected
Handle 0x0033
DMI type 39, 22 bytes.
System Power Supply
Location: Not Specified
Name:
Manufacturer: Not Specified
Serial Number:
Asset Tag: Not Specified
Model Part Number: Not Specified
Revision:
Max Power Capacity: 0.000 W
Status: Present, Unknown
Type: Switching
Input Voltage Range Switching: Unknown
Plugged: Yes
Hot Replaceable: No
Handle 0x0034
DMI type 130, 16 bytes.
OEM-specific Type
Header and Data:
82 10 34 00 00 5F 46 4A 5F 4F 45 4D 5F 10 00 00
Handle 0x0035
DMI type 130, 8 bytes.
OEM-specific Type
Header and Data:
82 08 35 00 01 02 00 01
Handle 0x0036
DMI type 176, 16 bytes.
OEM-specific Type
Header and Data:
B0 10 36 00 00 80 61 15 00 00 FF FF 01 08 FF FF
Handle 0x0037
DMI type 177, 12 bytes.
OEM-specific Type
Header and Data:
B1 0C 37 00 11 02 09 61 00 00 00 00
Handle 0x0038
DMI type 179, 6 bytes.
OEM-specific Type
Header and Data:
B3 06 38 00 00 30
Handle 0x0039
DMI type 180, 10 bytes.
OEM-specific Type
Header and Data:
B4 0A 39 00 E0 01 F0 00 00 00
Handle 0x003A
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 3A 00 00 10 00 00
Handle 0x003B
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 3B 00 01 10 00 00
Handle 0x003C
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 3C 00 02 09 00 00
Handle 0x003D
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 3D 00 03 02 11 E6
Handle 0x003E
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 3E 00 05 02 07 E6
Handle 0x003F
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 3F 00 06 02 11 E6
Handle 0x0040
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 40 00 07 02 11 E6
Handle 0x0041
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 41 00 0A 02 11 E6
Handle 0x0042
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 42 00 0B 02 11 E6
Handle 0x0043
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 43 00 0C 02 11 E6
Handle 0x0044
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 44 00 0F 10 00 00
Handle 0x0045
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 45 00 10 02 11 E6
Handle 0x0046
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 46 00 11 02 03 A0
Handle 0x0047
DMI type 185, 56 bytes.
OEM-specific Type
Header and Data:
B9 38 47 00 13 07 01 14 00 00 00 02 31 00 00 00
03 0A 00 00 00 05 05 03 00 FB 06 05 03 00 FB 07
21 00 00 00 08 19 A6 32 02 0A 12 67 3C 02 0B 15
A6 32 02 00 00 00 00 00
Handle 0x0048
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 48 00 14 00 00 00
Handle 0x0049
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 49 00 15 10 00 00
Handle 0x004A
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 4A 00 16 02 11 E6
Handle 0x004B
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 4B 00 17 10 00 00
Handle 0x004C
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 4C 00 18 02 11 E6
Handle 0x004D
DMI type 185, 46 bytes.
OEM-specific Type
Header and Data:
B9 2E 4D 00 19 07 0C 05 03 00 FB 0D AA 00 D8 00
0E A5 00 D4 00 0F C1 00 FF 00 10 0A 05 35 39 11
0A 05 2D 31 12 0A 05 4A 4D 00 00 00 00 00
Handle 0x004E
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 4E 00 1E 02 14 E6
Handle 0x004F
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 4F 00 FF 00 00 00
Handle 0x0050
DMI type 186, 15 bytes.
OEM-specific Type
Header and Data:
BA 0F 50 00 22 F0 15 26 01 01 01 01 12 0F EA
Handle 0x0051
DMI type 187, 12 bytes.
OEM-specific Type
Header and Data:
BB 0C 51 00 01 0F 58 12 22 05 21 00
Handle 0x0052
DMI type 187, 12 bytes.
OEM-specific Type
Header and Data:
BB 0C 52 00 02 0F 58 12 22 05 21 02
Handle 0x0053
DMI type 187, 12 bytes.
OEM-specific Type
Header and Data:
BB 0C 53 00 03 01 80 12 22 05 21 07
Handle 0x0054
DMI type 188, 8 bytes.
OEM-specific Type
Header and Data:
BC 08 54 00 38 38 31 24
Handle 0x0055
DMI type 189, 7 bytes.
OEM-specific Type
Header and Data:
BD 07 55 00 FF 33 00
Handle 0x0056
DMI type 127, 4 bytes.
End Of Table
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Celeron(R) CPU 2.40GHz
stepping : 9
cpu MHz : 2394.068
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr
bogomips : 4789.85
PCI devices found:
Bus 0, device 0, function 0:
Class 0600: PCI device 8086:2570 (rev 2).
Prefetchable 32 bit memory at 0xd0000000 [0xdfffffff].
Bus 0, device 1, function 0:
Class 0604: PCI device 8086:2571 (rev 2).
Master Capable. Latency=176. Min Gnt=13.
Bus 0, device 29, function 0:
Class 0c03: PCI device 8086:24d2 (rev 2).
IRQ 10.
I/O at 0x1000 [0x101f].
Bus 0, device 29, function 1:
Class 0c03: PCI device 8086:24d4 (rev 2).
IRQ 7.
I/O at 0x1400 [0x141f].
Bus 0, device 29, function 2:
Class 0c03: PCI device 8086:24d7 (rev 2).
IRQ 7.
I/O at 0x1800 [0x181f].
Bus 0, device 29, function 3:
Class 0c03: PCI device 8086:24de (rev 2).
IRQ 10.
I/O at 0x1c00 [0x1c1f].
Bus 0, device 30, function 0:
Class 0604: PCI device 8086:244e (rev 194).
Master Capable. No bursts. Min Gnt=7.
Bus 0, device 31, function 0:
Class 0601: PCI device 8086:24d0 (rev 2).
Bus 0, device 31, function 2:
Class 0101: PCI device 8086:24d1 (rev 2).
IRQ 7.
I/O at 0x2400 [0x240f].
Bus 0, device 31, function 3:
Class 0c05: PCI device 8086:24d3 (rev 2).
IRQ 4.
I/O at 0x2000 [0x201f].
Bus 1, device 0, function 0:
Class 0300: PCI device 1002:5960 (rev 1).
IRQ 10.
Master Capable. Latency=176. Min Gnt=8.
Prefetchable 32 bit memory at 0xe0000000 [0xefffffff].
I/O at 0x3000 [0x30ff].
Non-prefetchable 32 bit memory at 0xc0000000 [0xc000ffff].
Bus 3, device 5, function 0:
Class 0200: PCI device 10ec:8029 (rev 0).
IRQ 10.
I/O at 0x4000 [0x401f].
Bus 3, device 7, function 0:
Class 0401: PCI device 10ee:3fc5 (rev 50).
IRQ 9.
Master Capable. Latency=255.
Non-prefetchable 32 bit memory at 0xc0100000 [0xc010ffff].
Bus 3, device 8, function 0:
Class 0200: PCI device 8086:1051 (rev 2).
IRQ 10.
Master Capable. Latency=176. Min Gnt=8.Max Lat=56.
Non-prefetchable 32 bit memory at 0xc0110000 [0xc0110fff].
I/O at 0x4400 [0x443f].
--
Esben Stien is b0ef@e s a
http://www. s t n m
irc://irc. b - i . e/%23contact
[sip|iax]: e e
jid:b0ef@ n n
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.15-rt1
2006-01-10 22:17 ` 2.6.15-rt1 Esben Stien
@ 2006-01-11 3:09 ` Steven Rostedt
0 siblings, 0 replies; 23+ messages in thread
From: Steven Rostedt @ 2006-01-11 3:09 UTC (permalink / raw)
To: Esben Stien; +Cc: linux-kernel, Ingo Molnar
On Tue, 2006-01-10 at 23:17 +0100, Esben Stien wrote:
> Ingo Molnar <mingo@elte.hu> writes:
>
> > i have released the 2.6.15-rt1 tree
>
> Didn't see any release announcement for 2.6.15-rt3, so I post here.
If you want Ingo to see this, then please CC him (as I added him).
>
> I've booted up rt3 and got this:
>
> [drm] Loading R200 Microcode
> check_monotonic_clock: monotonic inconsistency detected!
> from 157c03cbfc9 (1476398989257) to 157c03ca8f6 (1476398983414).
> softirq-hrtimer/8[CPU#0]: BUG in check_monotonic_clock at kernel/time/timeofday.c:160
> [<c0112555>] __WARN_ON+0x40/0x5f (8)
> [<c012701a>] check_monotonic_clock+0x64/0x9a (48)
> [<c01273c7>] get_monotonic_clock+0xb5/0xe8 (32)
> [<c0124d95>] hrtimer_forward+0x2b/0xd6 (64)
> [<c011ae6a>] group_send_sig_info+0xb1/0xd3 (12)
> [<c0114e88>] it_real_fn+0x0/0x42 (40)
> [<c0114ec2>] it_real_fn+0x3a/0x42 (4)
> [<c01253c2>] run_hrtimer_softirq+0x7d/0xe8 (24)
> [<c01161e3>] ksoftirqd+0xce/0x139 (32)
> [<c0116115>] ksoftirqd+0x0/0x139 (40)
> [<c01223f2>] kthread+0x79/0xa3 (4)
> [<c0122379>] kthread+0x0/0xa3 (24)
> [<c0100db9>] kernel_thread_helper+0x5/0xb (16)
Is this AMD or Intel?
>
> I'm also, for some reason, unable to get my Logitech MX1000 mouse to
> work in xorg-6.8.1 here, through evdev. I changed my config file to
> use normal /dev/psaux as a temporary solution. I'm coming from
> linux-2.6.14-rt22 where everything related is working fine. No
> software has changed.
Does vanilla 2.6.15 (without -rt) work?
>
> I run my own distro.
Cool.
-- Steve
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.15-rt1
2006-01-03 9:47 2.6.15-rt1 Ingo Molnar
` (4 preceding siblings ...)
2006-01-10 22:17 ` 2.6.15-rt1 Esben Stien
@ 2006-01-11 10:16 ` Esben Stien
5 siblings, 0 replies; 23+ messages in thread
From: Esben Stien @ 2006-01-11 10:16 UTC (permalink / raw)
To: linux-kernel
Ingo Molnar <mingo@elte.hu> writes:
> i have released the 2.6.15-rt1 tree
Didn't see any release announcement for 2.6.15-rt3, so I post here.
I've booted up rt3 and got this:
[drm] Loading R200 Microcode
check_monotonic_clock: monotonic inconsistency detected!
from 157c03cbfc9 (1476398989257) to 157c03ca8f6 (1476398983414).
softirq-hrtimer/8[CPU#0]: BUG in check_monotonic_clock at kernel/time/timeofday.c:160
[<c0112555>] __WARN_ON+0x40/0x5f (8)
[<c012701a>] check_monotonic_clock+0x64/0x9a (48)
[<c01273c7>] get_monotonic_clock+0xb5/0xe8 (32)
[<c0124d95>] hrtimer_forward+0x2b/0xd6 (64)
[<c011ae6a>] group_send_sig_info+0xb1/0xd3 (12)
[<c0114e88>] it_real_fn+0x0/0x42 (40)
[<c0114ec2>] it_real_fn+0x3a/0x42 (4)
[<c01253c2>] run_hrtimer_softirq+0x7d/0xe8 (24)
[<c01161e3>] ksoftirqd+0xce/0x139 (32)
[<c0116115>] ksoftirqd+0x0/0x139 (40)
[<c01223f2>] kthread+0x79/0xa3 (4)
[<c0122379>] kthread+0x0/0xa3 (24)
[<c0100db9>] kernel_thread_helper+0x5/0xb (16)
I'm also, for some reason, unable to get my Logitech MX1000 mouse to
work in xorg-6.8.1 here, through evdev. I changed my config file to
use normal /dev/psaux as a temporary solution. I'm coming from
linux-2.6.14-rt22 where everything related is working fine. No
software has changed.
I run my own distro.
Here's the relevant part of xorg configuration:
Section "InputDevice" # Logitech MX1000
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "evdev"
Option "Dev Name" "Logitech USB Receiver"
Option "Dev Phys" "usb-0000:00:1d.0-1/input0"
Option "Device" "/dev/input/mice"
Option "Buttons" "12"
Option "ZAxisMapping" "11 12 10 9"
Option "Emulate3Buttons" "false"
Option "Resolution" "800"
Option "SampleRate" "800"
EndSection
This worked when I used (Option "Device" "/dev/psaux"). Then it is
bypassing the evdev system. The /dev/input/mice is present on the
system, though.
Here are some data about me:
Linux version 2.6.15-rt3 (b0ef@quasar) (gcc version 3.4.2) #1 PREEMPT Tue Jan 10 08:28:48 CET 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000005fef0000 (usable)
BIOS-e820: 000000005fef0000 - 000000005fefb000 (ACPI data)
BIOS-e820: 000000005fefb000 - 000000005ff00000 (ACPI NVS)
BIOS-e820: 000000005ff00000 - 000000005ff80000 (usable)
BIOS-e820: 000000005ff80000 - 0000000060000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
639MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 393088
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 163712 pages, LIFO batch:31
DMI present.
Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000)
Detected 2394.068 MHz processor.
Real-Time Preemption Support (C) 2004-2005 Ingo Molnar
Built 1 zonelists
Kernel command line: root=/dev/sda1
Initializing CPU#0
WARNING: experimental RCU implementation.
PID hash table entries: 4096 (order: 12, 65536 bytes)
Event source pit installed with caps set: 07
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1555004k/1572352k available (2451k kernel code, 16896k reserved, 865k data, 132k init, 654784k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4789.85 BogoMIPS (lpj=2394925)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
mtrr: v2.0 (20020519)
CPU: Intel(R) Celeron(R) CPU 2.40GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd987, last bus=3
PCI: Using configuration type 1
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI quirk: region f000-f07f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region f180-f1bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/24d0] at 0000:00:1f.0
PCI: IRQ 0 for device 0000:00:1f.2 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 7 for device 0000:00:1f.2
PCI: Sharing IRQ 7 with 0000:00:1d.2
PCI: Bridge: 0000:00:01.0
IO window: 3000-3fff
MEM window: c0000000-c00fffff
PREFETCH window: e0000000-efffffff
PCI: Bridge: 0000:00:1e.0
IO window: 4000-4fff
MEM window: c0100000-c01fffff
PREFETCH window: 70000000-700fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1136913723.097:1): initialized
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.25 [Flags: R/O].
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Time: tsc clocksource has been installed.
hrtimers: Switched to high resolution mode CPU 0
lp: driver loaded but no devices found
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 865 Chipset.
agpgart: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.0.0 20040925
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 10 for device 0000:03:05.0
eth0: RealTek RTL-8029 found at 0x4000, IRQ 10, 52:54:00:DF:C7:EB.
e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
PCI: Found IRQ 10 for device 0000:03:08.0
e100: eth1: e100_probe: addr 0xc0110000, irq 10, MAC addr 00:30:05:4F:61:E1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
ide1: I/O resource 0x170-0x177 not free.
ide1: ports already in use, skipping probe
libata version 1.20 loaded.
ata_piix 0000:00:1f.2: version 1.05
ata_piix 0000:00:1f.2: combined mode detected (p=0, s=1)
PCI: Found IRQ 7 for device 0000:00:1f.2
PCI: Sharing IRQ 7 with 0000:00:1d.2
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0x2400 irq 14
ata1: disabling port
scsi0 : ata_piix
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2408 irq 15
ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4673 85:7c69 86:3e01 87:4663 88:407f
ata2: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48
ata2: dev 0 configured for UDMA/133
scsi1 : ata_piix
Vendor: ATA Model: Maxtor 6L300S0 Rev: BANC
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2
sd 1:0:0:0: Attached scsi disk sda
sd 1:0:0:0: Attached scsi generic sg0 type 0
ieee1394: raw1394: /dev/raw1394 device initialized
usbmon: debugfs is not available
USB Universal Host Controller Interface driver v2.3
PCI: Found IRQ 10 for device 0000:00:1d.0
PCI: Sharing IRQ 10 with 0000:00:1d.3
PCI: Sharing IRQ 10 with 0000:01:00.0
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 7 for device 0000:00:1d.1
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 7, io base 0x00001400
usb 1-1: new low speed USB device using uhci_hcd and address 2
usb 1-2: new full speed USB device using uhci_hcd and address 3
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-2.2: new full speed USB device using uhci_hcd and address 4
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Found IRQ 7 for device 0000:00:1d.2
PCI: Sharing IRQ 7 with 0000:00:1f.2
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 7, io base 0x00001800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Found IRQ 10 for device 0000:00:1d.3
PCI: Sharing IRQ 10 with 0000:00:1d.0
PCI: Sharing IRQ 10 with 0000:01:00.0
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 10, io base 0x00001c00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
input: Logitech USB Receiver as /class/input/input0
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
Advanced Linux Sound Architecture Driver Version 1.0.10rc3 (Mon Nov 07 13:30:21 2005 UTC).
ALSA device list:
No soundcards found.
oprofile: using timer interrupt.
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 65536 (order: 9, 2359296 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 212 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ReiserFS: sda1: found reiserfs format "3.6" with standard journal
input: AT Translated Set 2 keyboard as /class/input/input1
ReiserFS: sda1: using ordered data mode
ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda1: checking transaction log (sda1)
ReiserFS: sda1: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 132k freed
Adding 3879688k swap on /dev/sda2. Priority:1 extents:1 across:3879688k
PCI: Found IRQ 9 for device 0000:03:07.0
Hammerfall-DSP: Firmware already present, initializing card.
usbcore: registered new driver snd-usb-audio
do_settimeofday() was called!
e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex
PCI: Found IRQ 10 for device 0000:01:00.0
PCI: Sharing IRQ 10 with 0000:00:1d.0
PCI: Sharing IRQ 10 with 0000:00:1d.3
[drm] Initialized radeon 1.19.0 20050911 on minor 0:
mtrr: 0xe0000000,0x10000000 overlaps existing 0xe0000000,0x8000000
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: reserved bits set (4) in mode 0x1f004a0f. Fixed.
agpgart: X tried to set rate=x12. Setting to AGP3 x8 mode.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[drm] Loading R200 Microcode
check_monotonic_clock: monotonic inconsistency detected!
from 157c03cbfc9 (1476398989257) to 157c03ca8f6 (1476398983414).
softirq-hrtimer/8[CPU#0]: BUG in check_monotonic_clock at kernel/time/timeofday.c:160
[<c0112555>] __WARN_ON+0x40/0x5f (8)
[<c012701a>] check_monotonic_clock+0x64/0x9a (48)
[<c01273c7>] get_monotonic_clock+0xb5/0xe8 (32)
[<c0124d95>] hrtimer_forward+0x2b/0xd6 (64)
[<c011ae6a>] group_send_sig_info+0xb1/0xd3 (12)
[<c0114e88>] it_real_fn+0x0/0x42 (40)
[<c0114ec2>] it_real_fn+0x3a/0x42 (4)
[<c01253c2>] run_hrtimer_softirq+0x7d/0xe8 (24)
[<c01161e3>] ksoftirqd+0xce/0x139 (32)
[<c0116115>] ksoftirqd+0x0/0x139 (40)
[<c01223f2>] kthread+0x79/0xa3 (4)
[<c0122379>] kthread+0x0/0xa3 (24)
[<c0100db9>] kernel_thread_helper+0x5/0xb (16)
I: Bus=0003 Vendor=046d Product=c50e Version=2500
N: Name="Logitech USB Receiver"
P: Phys=usb-0000:00:1d.0-1/input0
S: Sysfs=/class/input/input0
H: Handlers=mouse0 event0
B: EV=7
B: KEY=ffff0000 0 0 0 0 0 0 0 0
B: REL=143
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/class/input/input1
H: Handlers=kbd event1
B: EV=120013
B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7
PCI devices found:
Bus 0, device 0, function 0:
Class 0600: PCI device 8086:2570 (rev 2).
Prefetchable 32 bit memory at 0xd0000000 [0xdfffffff].
Bus 0, device 1, function 0:
Class 0604: PCI device 8086:2571 (rev 2).
Master Capable. Latency=176. Min Gnt=13.
Bus 0, device 29, function 0:
Class 0c03: PCI device 8086:24d2 (rev 2).
IRQ 10.
I/O at 0x1000 [0x101f].
Bus 0, device 29, function 1:
Class 0c03: PCI device 8086:24d4 (rev 2).
IRQ 7.
I/O at 0x1400 [0x141f].
Bus 0, device 29, function 2:
Class 0c03: PCI device 8086:24d7 (rev 2).
IRQ 7.
I/O at 0x1800 [0x181f].
Bus 0, device 29, function 3:
Class 0c03: PCI device 8086:24de (rev 2).
IRQ 10.
I/O at 0x1c00 [0x1c1f].
Bus 0, device 30, function 0:
Class 0604: PCI device 8086:244e (rev 194).
Master Capable. No bursts. Min Gnt=7.
Bus 0, device 31, function 0:
Class 0601: PCI device 8086:24d0 (rev 2).
Bus 0, device 31, function 2:
Class 0101: PCI device 8086:24d1 (rev 2).
IRQ 7.
I/O at 0x2400 [0x240f].
Bus 0, device 31, function 3:
Class 0c05: PCI device 8086:24d3 (rev 2).
IRQ 4.
I/O at 0x2000 [0x201f].
Bus 1, device 0, function 0:
Class 0300: PCI device 1002:5960 (rev 1).
IRQ 10.
Master Capable. Latency=176. Min Gnt=8.
Prefetchable 32 bit memory at 0xe0000000 [0xefffffff].
I/O at 0x3000 [0x30ff].
Non-prefetchable 32 bit memory at 0xc0000000 [0xc000ffff].
Bus 3, device 5, function 0:
Class 0200: PCI device 10ec:8029 (rev 0).
IRQ 10.
I/O at 0x4000 [0x401f].
Bus 3, device 7, function 0:
Class 0401: PCI device 10ee:3fc5 (rev 50).
IRQ 9.
Master Capable. Latency=255.
Non-prefetchable 32 bit memory at 0xc0100000 [0xc010ffff].
Bus 3, device 8, function 0:
Class 0200: PCI device 8086:1051 (rev 2).
IRQ 10.
Master Capable. Latency=176. Min Gnt=8.Max Lat=56.
Non-prefetchable 32 bit memory at 0xc0110000 [0xc0110fff].
I/O at 0x4400 [0x443f].
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15-rt3 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.3
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15-rt3 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15-rt3 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc=129/900 us (14%), #Int= 2, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15-rt3 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c50e Rev=25.00
S: Manufacturer=Logitech
S: Product=USB Receiver
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 70mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0409 ProdID=0059 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=02 Prnt=03 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1397 ProdID=00bc Rev= 1.00
S: Manufacturer=BEHRINGER
S: Product=BCF2000
C:* #Ifs= 2 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=snd-usb-audio
I: If#= 1 Alt= 0 #EPs= 2 Cls=01(audio) Sub=03 Prot=00 Driver=snd-usb-audio
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 4 Ivl=0ms
# dmidecode 2.6
SMBIOS 2.31 present.
87 structures occupying 2189 bytes.
Table at 0x000F03A0.
Handle 0x0000
DMI type 0, 20 bytes.
BIOS Information
Vendor: FUJITSU SIEMENS // Phoenix Technologies Ltd.
Version: 4.06 Rev. 1.09.1561
Release Date: 04/23/2004
Address: 0xE5690
Runtime Size: 108912 bytes
ROM Size: 512 kB
Characteristics:
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
5.25"/360 KB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Handle 0x0001
DMI type 1, 25 bytes.
System Information
Manufacturer: FUJITSU SIEMENS
Product Name: SCENIC P / SCENICO P
Version:
Serial Number: YBEM389365
UUID: D0DB43CC-E8AE-11D7-A847-F635F11A2CF7
Wake-up Type: Power Switch
Handle 0x0002
DMI type 2, 8 bytes.
Base Board Information
Manufacturer: FUJITSU SIEMENS
Product Name: D1561
Version: S26361-D1561
Serial Number:
Handle 0x0003
DMI type 3, 17 bytes.
Chassis Information
Manufacturer: FUJITSU SIEMENS
Type: Mini Tower
Lock: Present
Version: SCEP
Serial Number: YBEM389365
Asset Tag: YBEM389365
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Handle 0x0004
DMI type 4, 35 bytes.
Processor Information
Socket Designation: CPU
Type: Central Processor
Family: Celeron
Manufacturer: Intel
ID: 29 0F 00 00 FF FB EB BF
Signature: Type 0, Family 15, Model 2, Stepping 9
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Hyper-threading technology)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel Celeron(R)
Voltage: 3.3 V
External Clock: 400 MHz
Max Speed: 2400 MHz
Current Speed: 2400 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: 0x0007
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0005
DMI type 7, 19 bytes.
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Through
Location: Internal
Installed Size: 8 KB
Maximum Size: 32 KB
Supported SRAM Types:
Burst
Synchronous
Installed SRAM Type: Burst Synchronous
Speed: Unknown
Error Correction Type: Parity
System Type: Data
Associativity: Other
Handle 0x0006
DMI type 7, 19 bytes.
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 128 KB
Maximum Size: 1024 KB
Supported SRAM Types:
Burst
Pipeline Burst
Synchronous
Asynchronous
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Unknown
System Type: Unified
Associativity: Other
Handle 0x0007
DMI type 7, 19 bytes.
Cache Information
Socket Designation: L3 Cache
Configuration: Disabled, Not Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 0 KB
Maximum Size: 16384 KB
Supported SRAM Types:
Burst
Pipeline Burst
Synchronous
Asynchronous
Installed SRAM Type: None
Speed: Unknown
Error Correction Type: Unknown
System Type: Unified
Associativity: Other
Handle 0x0008
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: SMsC
Internal Connector Type: None
External Reference Designator: PS/2 Mouse
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0009
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: SMsC
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x000A
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: SMsC
Internal Connector Type: None
External Reference Designator: Parallel
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP
Handle 0x000B
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: SMsC
Internal Connector Type: None
External Reference Designator: Serial-1
External Connector Type: DB-9 male
Port Type: Serial Port 16550 Compatible
Handle 0x000C
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: SMsC
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator: Serial-2
External Connector Type: None
Port Type: Serial Port 16550 Compatible
Handle 0x000D
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: SMsC
Internal Connector Type: On Board Floppy
External Reference Designator: Floppy
External Connector Type: None
Port Type: None
Handle 0x000E
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: On Board IDE
External Reference Designator: Primary IDE
External Connector Type: None
Port Type: None
Handle 0x000F
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: On Board IDE
External Reference Designator: Secondary IDE
External Connector Type: None
Port Type: None
Handle 0x0010
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: Other
External Reference Designator: SATA-1
External Connector Type: None
Port Type: None
Handle 0x0011
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: Other
External Reference Designator: SATA-2
External Connector Type: None
Port Type: None
Handle 0x0012
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: None
External Reference Designator: USB-1
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0013
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: None
External Reference Designator: USB-2
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0014
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: None
External Reference Designator: USB-3
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0015
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: None
External Reference Designator: USB-4
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0016
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: None
External Reference Designator: USB-5
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0017
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: None
External Reference Designator: USB-6
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0018
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator: USB-7
External Connector Type: None
Port Type: USB
Handle 0x0019
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: ICH5
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator: USB-8
External Connector Type: None
Port Type: USB
Handle 0x001A
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Intel 865G
Internal Connector Type: None
External Reference Designator: Video
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x001B
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: INTEL 82562EZ
Internal Connector Type: None
External Reference Designator: LAN
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x001C
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: AD1980
Internal Connector Type: None
External Reference Designator: Rear: Line-In
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x001D
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: AD1980
Internal Connector Type: None
External Reference Designator: Rear: Line-Out
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x001E
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: AD1980
Internal Connector Type: None
External Reference Designator: Rear: Mic-In
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x001F
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: AD1980
Internal Connector Type: None
External Reference Designator: Front: Mic-In
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0020
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: AD1980
Internal Connector Type: None
External Reference Designator: Front: Line-Out
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0021
DMI type 9, 13 bytes.
System Slot Information
Designation: AGP
Type: 32-bit AGP 4x
Current Usage: In Use
Length: Long
ID: 1
Characteristics:
PME signal is supported
Handle 0x0022
DMI type 9, 13 bytes.
System Slot Information
Designation: PCI-1
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 2
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0023
DMI type 9, 13 bytes.
System Slot Information
Designation: PCI-2
Type: 32-bit PCI
Current Usage: In Use
Length: Long
ID: 3
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0024
DMI type 9, 13 bytes.
System Slot Information
Designation: PCI-3
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 4
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0025
DMI type 10, 12 bytes.
On Board Device 1 Information
Type: Other
Status: Disabled
Description: SMsC SuperI/O
On Board Device 2 Information
Type: Sound
Status: Disabled
Description: AD1980
On Board Device 3 Information
Type: Ethernet
Status: Disabled
Description: Intel 82562EZ
On Board Device 4 Information
Type: Video
Status: Disabled
Description: Intel 865G
Handle 0x0026
DMI type 11, 5 bytes.
OEM Strings
String 1: FUJITSU SIEMENS
String 2: FUJITSU SIEMENS SYSTEM
Handle 0x0027
DMI type 12, 5 bytes.
System Configuration Options
Option 1: J1-3: Default position
Option 2: J1-2: Reserved
Option 3: J5-6: Recovery BIOS active
Handle 0x0028
DMI type 16, 15 bytes.
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 4 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x0029
DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x0028
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: Slot-1
Bank Locator: Channel A
Type: DDR
Type Detail: Synchronous
Speed: 266 MHz (3.8 ns)
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x002A
DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x0028
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: Slot-3
Bank Locator: Channel A
Type: DDR
Type Detail: Synchronous
Speed: 266 MHz (3.8 ns)
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x002B
DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x0028
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: Slot-2
Bank Locator: Channel B
Type: DDR
Type Detail: Synchronous
Speed: 266 MHz (3.8 ns)
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x002C
DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x0028
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: Slot-4
Bank Locator: Channel B
Type: DDR
Type Detail: Synchronous
Speed: 266 MHz (3.8 ns)
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x002D
DMI type 19, 15 bytes.
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000600003FF
Range Size: 1572865 kB
Physical Array Handle: 0x0028
Partition Width: 0
Handle 0x002E
DMI type 20, 19 bytes.
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0001FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x0029
Memory Array Mapped Address Handle: 0x002D
Partition Row Position: 1
Handle 0x002F
DMI type 20, 19 bytes.
Memory Device Mapped Address
Starting Address: 0x00020000000
Ending Address: 0x0003FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x002A
Memory Array Mapped Address Handle: 0x002D
Partition Row Position: 1
Handle 0x0030
DMI type 20, 19 bytes.
Memory Device Mapped Address
Starting Address: 0x00040000000
Ending Address: 0x0005FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x002B
Memory Array Mapped Address Handle: 0x002D
Partition Row Position: 1
Handle 0x0031
DMI type 20, 19 bytes.
Memory Device Mapped Address
Starting Address: 0x0005FFFFC00
Ending Address: 0x0005FFFFFFF
Range Size: 1 kB
Physical Device Handle: 0x002C
Memory Array Mapped Address Handle: 0x002D
Partition Row Position: 1
Handle 0x0032
DMI type 32, 11 bytes.
System Boot Information
Status: No errors detected
Handle 0x0033
DMI type 39, 22 bytes.
System Power Supply
Location: Not Specified
Name:
Manufacturer: Not Specified
Serial Number:
Asset Tag: Not Specified
Model Part Number: Not Specified
Revision:
Max Power Capacity: 0.000 W
Status: Present, Unknown
Type: Switching
Input Voltage Range Switching: Unknown
Plugged: Yes
Hot Replaceable: No
Handle 0x0034
DMI type 130, 16 bytes.
OEM-specific Type
Header and Data:
82 10 34 00 00 5F 46 4A 5F 4F 45 4D 5F 10 00 00
Handle 0x0035
DMI type 130, 8 bytes.
OEM-specific Type
Header and Data:
82 08 35 00 01 02 00 01
Handle 0x0036
DMI type 176, 16 bytes.
OEM-specific Type
Header and Data:
B0 10 36 00 00 80 61 15 00 00 FF FF 01 08 FF FF
Handle 0x0037
DMI type 177, 12 bytes.
OEM-specific Type
Header and Data:
B1 0C 37 00 11 02 09 61 00 00 00 00
Handle 0x0038
DMI type 179, 6 bytes.
OEM-specific Type
Header and Data:
B3 06 38 00 00 30
Handle 0x0039
DMI type 180, 10 bytes.
OEM-specific Type
Header and Data:
B4 0A 39 00 E0 01 F0 00 00 00
Handle 0x003A
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 3A 00 00 10 00 00
Handle 0x003B
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 3B 00 01 10 00 00
Handle 0x003C
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 3C 00 02 09 00 00
Handle 0x003D
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 3D 00 03 02 11 E6
Handle 0x003E
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 3E 00 05 02 07 E6
Handle 0x003F
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 3F 00 06 02 11 E6
Handle 0x0040
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 40 00 07 02 11 E6
Handle 0x0041
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 41 00 0A 02 11 E6
Handle 0x0042
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 42 00 0B 02 11 E6
Handle 0x0043
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 43 00 0C 02 11 E6
Handle 0x0044
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 44 00 0F 10 00 00
Handle 0x0045
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 45 00 10 02 11 E6
Handle 0x0046
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 46 00 11 02 03 A0
Handle 0x0047
DMI type 185, 56 bytes.
OEM-specific Type
Header and Data:
B9 38 47 00 13 07 01 14 00 00 00 02 31 00 00 00
03 0A 00 00 00 05 05 03 00 FB 06 05 03 00 FB 07
21 00 00 00 08 19 A6 32 02 0A 12 67 3C 02 0B 15
A6 32 02 00 00 00 00 00
Handle 0x0048
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 48 00 14 00 00 00
Handle 0x0049
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 49 00 15 10 00 00
Handle 0x004A
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 4A 00 16 02 11 E6
Handle 0x004B
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 4B 00 17 10 00 00
Handle 0x004C
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 4C 00 18 02 11 E6
Handle 0x004D
DMI type 185, 46 bytes.
OEM-specific Type
Header and Data:
B9 2E 4D 00 19 07 0C 05 03 00 FB 0D AA 00 D8 00
0E A5 00 D4 00 0F C1 00 FF 00 10 0A 05 35 39 11
0A 05 2D 31 12 0A 05 4A 4D 00 00 00 00 00
Handle 0x004E
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 4E 00 1E 02 14 E6
Handle 0x004F
DMI type 185, 8 bytes.
OEM-specific Type
Header and Data:
B9 08 4F 00 FF 00 00 00
Handle 0x0050
DMI type 186, 15 bytes.
OEM-specific Type
Header and Data:
BA 0F 50 00 22 F0 15 26 01 01 01 01 12 0F EA
Handle 0x0051
DMI type 187, 12 bytes.
OEM-specific Type
Header and Data:
BB 0C 51 00 01 0F 58 12 22 05 21 00
Handle 0x0052
DMI type 187, 12 bytes.
OEM-specific Type
Header and Data:
BB 0C 52 00 02 0F 58 12 22 05 21 02
Handle 0x0053
DMI type 187, 12 bytes.
OEM-specific Type
Header and Data:
BB 0C 53 00 03 01 80 12 22 05 21 07
Handle 0x0054
DMI type 188, 8 bytes.
OEM-specific Type
Header and Data:
BC 08 54 00 38 38 31 24
Handle 0x0055
DMI type 189, 7 bytes.
OEM-specific Type
Header and Data:
BD 07 55 00 FF 33 00
Handle 0x0056
DMI type 127, 4 bytes.
End Of Table
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Celeron(R) CPU 2.40GHz
stepping : 9
cpu MHz : 2394.068
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr
bogomips : 4789.85
PCI devices found:
Bus 0, device 0, function 0:
Class 0600: PCI device 8086:2570 (rev 2).
Prefetchable 32 bit memory at 0xd0000000 [0xdfffffff].
Bus 0, device 1, function 0:
Class 0604: PCI device 8086:2571 (rev 2).
Master Capable. Latency=176. Min Gnt=13.
Bus 0, device 29, function 0:
Class 0c03: PCI device 8086:24d2 (rev 2).
IRQ 10.
I/O at 0x1000 [0x101f].
Bus 0, device 29, function 1:
Class 0c03: PCI device 8086:24d4 (rev 2).
IRQ 7.
I/O at 0x1400 [0x141f].
Bus 0, device 29, function 2:
Class 0c03: PCI device 8086:24d7 (rev 2).
IRQ 7.
I/O at 0x1800 [0x181f].
Bus 0, device 29, function 3:
Class 0c03: PCI device 8086:24de (rev 2).
IRQ 10.
I/O at 0x1c00 [0x1c1f].
Bus 0, device 30, function 0:
Class 0604: PCI device 8086:244e (rev 194).
Master Capable. No bursts. Min Gnt=7.
Bus 0, device 31, function 0:
Class 0601: PCI device 8086:24d0 (rev 2).
Bus 0, device 31, function 2:
Class 0101: PCI device 8086:24d1 (rev 2).
IRQ 7.
I/O at 0x2400 [0x240f].
Bus 0, device 31, function 3:
Class 0c05: PCI device 8086:24d3 (rev 2).
IRQ 4.
I/O at 0x2000 [0x201f].
Bus 1, device 0, function 0:
Class 0300: PCI device 1002:5960 (rev 1).
IRQ 10.
Master Capable. Latency=176. Min Gnt=8.
Prefetchable 32 bit memory at 0xe0000000 [0xefffffff].
I/O at 0x3000 [0x30ff].
Non-prefetchable 32 bit memory at 0xc0000000 [0xc000ffff].
Bus 3, device 5, function 0:
Class 0200: PCI device 10ec:8029 (rev 0).
IRQ 10.
I/O at 0x4000 [0x401f].
Bus 3, device 7, function 0:
Class 0401: PCI device 10ee:3fc5 (rev 50).
IRQ 9.
Master Capable. Latency=255.
Non-prefetchable 32 bit memory at 0xc0100000 [0xc010ffff].
Bus 3, device 8, function 0:
Class 0200: PCI device 8086:1051 (rev 2).
IRQ 10.
Master Capable. Latency=176. Min Gnt=8.Max Lat=56.
Non-prefetchable 32 bit memory at 0xc0110000 [0xc0110fff].
I/O at 0x4400 [0x443f].
--
Esben Stien is b0ef@e s a
http://www. s t n m
irc://irc. b - i . e/%23contact
[sip|iax]: e e
jid:b0ef@ n n
^ permalink raw reply [flat|nested] 23+ messages in thread
end of thread, other threads:[~2006-01-11 8:24 UTC | newest]
Thread overview: 23+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-01-03 9:47 2.6.15-rt1 Ingo Molnar
2006-01-03 11:21 ` 2.6.15-rt1 Michal Piotrowski
2006-01-03 11:27 ` 2.6.15-rt1 Ingo Molnar
2006-01-03 11:34 ` 2.6.15-rt1 Michal Piotrowski
2006-01-03 14:33 ` 2.6.15-rt1 Florian Schmidt
2006-01-03 15:13 ` 2.6.15-rt1 Florian Schmidt
2006-01-03 18:40 ` 2.6.15-rt1 Steven Rostedt
2006-01-03 18:56 ` 2.6.15-rt1 Steven Rostedt
2006-01-04 0:01 ` 2.6.15-rt1 Florian Schmidt
2006-01-04 0:24 ` 2.6.15-rt1 Steven Rostedt
2006-01-04 14:31 ` 2.6.15-rt1 Steven Rostedt
2006-01-03 23:12 ` 2.6.15-rt1 David Brown
2006-01-03 23:29 ` 2.6.15-rt1 David Brown
2006-01-04 2:24 ` 2.6.15-rt1 YOSHIFUJI Hideaki / 吉藤英明
2006-01-04 7:16 ` 2.6.15-rt1 David Brown
2006-01-04 7:43 ` 2.6.15-rt1 YOSHIFUJI Hideaki / 吉藤英明
2006-01-04 7:50 ` 2.6.15-rt1 David Brown
2006-01-04 21:01 ` 2.6.15-rt1 Willy Tarreau
2006-01-05 20:52 ` 2.6.15-rt1 James Cloos
2006-01-05 21:00 ` 2.6.15-rt1 David Brown
2006-01-10 22:17 ` 2.6.15-rt1 Esben Stien
2006-01-11 3:09 ` 2.6.15-rt1 Steven Rostedt
2006-01-11 10:16 ` 2.6.15-rt1 Esben Stien
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).