From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-gpio@vger.kernel.org, Jason Cooper <jason@lakedaemon.net>,
Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Nadav Haklai <nadavh@marvell.com>, Victor Gu <xigu@marvell.com>,
Marcin Wojtas <mw@semihalf.com>,
Wilson Ding <dingwei@marvell.com>, Hua Jing <jinghua@marvell.com>,
Neta Zur Hershkovits <neta@marvell.com>
Subject: Re: [PATCH v4 7/7] ARM64: dts: marvell: armada37xx: add pinctrl definition
Date: Wed, 26 Apr 2017 12:28:25 +0200 [thread overview]
Message-ID: <87mvb38nue.fsf@free-electrons.com> (raw)
In-Reply-To: <7b07bd69cd506effa716c41f8ec3dda7a7c6c563.1491405475.git-series.gregory.clement@free-electrons.com> (Gregory CLEMENT's message of "Wed, 5 Apr 2017 17:18:08 +0200")
Hi,
On mer., avril 05 2017, Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:
> Start to populate the device tree of the Armada 37xx with the pincontrol
> configuration used on the board providing a dts.
>
> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Applied on mvebu/dt64
Thanks,
Gregory
> ---
> arch/arm64/boot/dts/marvell/armada-3720-db.dts | 8 +++++-
> arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 31 +++++++++++++++++++-
> 2 files changed, 39 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
> index 86602c907a61..e749c5727490 100644
> --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
> @@ -63,6 +63,8 @@
> };
>
> &i2c0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pins>;
> status = "okay";
> };
>
> @@ -73,6 +75,8 @@
>
> &spi0 {
> status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi_quad_pins>;
>
> m25p80@0 {
> compatible = "jedec,spi-nor";
> @@ -103,6 +107,8 @@
>
> /* Exported on the micro USB connector CON32 through an FTDI */
> &uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart1_pins>;
> status = "okay";
> };
>
> @@ -128,6 +134,8 @@
> };
>
> ð0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&rgmii_pins>;
> phy-mode = "rgmii-id";
> phy = <&phy0>;
> status = "okay";
> diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
> index c02b13479458..2ac25f54d01d 100644
> --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
> @@ -186,6 +186,31 @@
> clock-output-names = "xtal";
> #clock-cells = <0>;
> };
> +
> + spi_quad_pins: spi-quad-pins {
> + groups = "spi_quad";
> + function = "spi";
> + };
> +
> + i2c1_pins: i2c1-pins {
> + groups = "i2c1";
> + function = "i2c";
> + };
> +
> + i2c2_pins: i2c2-pins {
> + groups = "i2c2";
> + function = "i2c";
> + };
> +
> + uart1_pins: uart1-pins {
> + groups = "uart1";
> + function = "uart";
> + };
> +
> + uart2_pins: uart2-pins {
> + groups = "uart2";
> + function = "uart";
> + };
> };
>
> pinctrl_sb: pinctrl-sb@18800 {
> @@ -203,6 +228,12 @@
> <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
> };
> +
> + rgmii_pins: mii-pins {
> + groups = "rgmii";
> + function = "mii";
> + };
> +
> };
>
> eth0: ethernet@30000 {
> --
> git-series 0.9.1
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
prev parent reply other threads:[~2017-04-26 10:28 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-05 15:18 [PATCH v4 0/7] Add support for pinctrl/gpio on Armada 37xx Gregory CLEMENT
2017-04-05 15:18 ` [PATCH v4 1/7] pinctrl: dt-bindings: Add documentation for Armada 37xx pin controllers Gregory CLEMENT
2017-04-10 18:15 ` Rob Herring
2017-04-11 16:09 ` Gregory CLEMENT
2017-04-24 9:29 ` Linus Walleij
2017-04-05 15:18 ` [PATCH v4 2/7] arm64: marvell: enable the Armada 37xx pinctrl driver Gregory CLEMENT
2017-04-26 10:26 ` Gregory CLEMENT
2017-04-05 15:18 ` [PATCH v4 3/7] pinctrl: armada-37xx: Add pin controller support for Armada 37xx Gregory CLEMENT
2017-04-05 15:18 ` [PATCH v4 4/7] pinctrl: armada-37xx: Add gpio support Gregory CLEMENT
2017-04-24 11:48 ` Linus Walleij
2017-04-05 15:18 ` [PATCH v4 5/7] pinctrl: aramda-37xx: Add irqchip support Gregory CLEMENT
2017-04-05 16:03 ` Gregory CLEMENT
2017-04-24 12:14 ` Linus Walleij
2017-04-24 12:16 ` Linus Walleij
2017-04-26 9:23 ` Gregory CLEMENT
2017-04-26 12:03 ` Linus Walleij
2017-04-26 13:12 ` Gregory CLEMENT
2017-04-05 15:18 ` [PATCH v4 6/7] ARM64: dts: marvell: Add pinctrl nodes for Armada 3700 Gregory CLEMENT
2017-04-26 10:27 ` Gregory CLEMENT
2017-04-05 15:18 ` [PATCH v4 7/7] ARM64: dts: marvell: armada37xx: add pinctrl definition Gregory CLEMENT
2017-04-26 10:28 ` Gregory CLEMENT [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87mvb38nue.fsf@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=andrew@lunn.ch \
--cc=devicetree@vger.kernel.org \
--cc=dingwei@marvell.com \
--cc=jason@lakedaemon.net \
--cc=jinghua@marvell.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mw@semihalf.com \
--cc=nadavh@marvell.com \
--cc=neta@marvell.com \
--cc=robh+dt@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=thomas.petazzoni@free-electrons.com \
--cc=xigu@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).