linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: Quentin Perret <qperret@google.com>
Cc: james.morse@arm.com, alexandru.elisei@arm.com,
	suzuki.poulose@arm.com, catalin.marinas@arm.com, will@kernel.org,
	linux-arm-kernel@lists.infradead.org,
	kvmarm@lists.cs.columbia.edu, linux-kernel@vger.kernel.org,
	ardb@kernel.org, qwandor@google.com, tabba@google.com,
	dbrazdil@google.com, kernel-team@android.com
Subject: Re: [PATCH v2 04/16] KVM: arm64: Optimize host memory aborts
Date: Mon, 26 Jul 2021 11:35:10 +0100	[thread overview]
Message-ID: <87pmv5e529.wl-maz@kernel.org> (raw)
In-Reply-To: <20210726092905.2198501-5-qperret@google.com>

On Mon, 26 Jul 2021 10:28:53 +0100,
Quentin Perret <qperret@google.com> wrote:
> 
> The kvm_pgtable_stage2_find_range() function is used in the host memory
> abort path to try and look for the largest block mapping that can be
> used to map the faulting address. In order to do so, the function
> currently walks the stage-2 page-table and looks for existing
> incompatible mappings within the range of the largest possible block.
> If incompatible mappings are found, it tries the same procedure again,
> but using a smaller block range, and repeats until a matching range is
> found (potentially up to page granularity). While this approach has
> benefits (mostly in the fact that it proactively coalesces host stage-2
> mappings), it can be slow if the ranges are fragmented, and it isn't
> optimized to deal with CPUs faulting on the same IPA as all of them will
> do all the work every time.
> 
> To avoid these issues, remove kvm_pgtable_stage2_find_range(), and walk
> the page-table only once in the host_mem_abort() path to find the
> closest leaf to the input address. With this, use the corresponding
> range if it is invalid and not owned by another entity. If a valid leaf
> is found, return -EAGAIN similar to what is done in the
> kvm_pgtable_stage2_map() path to optimize concurrent faults.
> 
> Signed-off-by: Quentin Perret <qperret@google.com>
> ---
>  arch/arm64/include/asm/kvm_pgtable.h  | 30 -----------
>  arch/arm64/kvm/hyp/nvhe/mem_protect.c | 39 +++++++++++++-
>  arch/arm64/kvm/hyp/pgtable.c          | 74 ---------------------------
>  3 files changed, 38 insertions(+), 105 deletions(-)
> 
> diff --git a/arch/arm64/include/asm/kvm_pgtable.h b/arch/arm64/include/asm/kvm_pgtable.h
> index 5a7a13bbd4a1..cec76a49f521 100644
> --- a/arch/arm64/include/asm/kvm_pgtable.h
> +++ b/arch/arm64/include/asm/kvm_pgtable.h
> @@ -141,16 +141,6 @@ enum kvm_pgtable_prot {
>  #define PAGE_HYP_RO		(KVM_PGTABLE_PROT_R)
>  #define PAGE_HYP_DEVICE		(PAGE_HYP | KVM_PGTABLE_PROT_DEVICE)
>  
> -/**
> - * struct kvm_mem_range - Range of Intermediate Physical Addresses
> - * @start:	Start of the range.
> - * @end:	End of the range.
> - */
> -struct kvm_mem_range {
> -	u64 start;
> -	u64 end;
> -};
> -
>  /**
>   * enum kvm_pgtable_walk_flags - Flags to control a depth-first page-table walk.
>   * @KVM_PGTABLE_WALK_LEAF:		Visit leaf entries, including invalid
> @@ -477,24 +467,4 @@ int kvm_pgtable_walk(struct kvm_pgtable *pgt, u64 addr, u64 size,
>   */
>  int kvm_pgtable_get_leaf(struct kvm_pgtable *pgt, u64 addr,
>  			 kvm_pte_t *ptep, u32 *level);
> -
> -/**
> - * kvm_pgtable_stage2_find_range() - Find a range of Intermediate Physical
> - *				     Addresses with compatible permission
> - *				     attributes.
> - * @pgt:	Page-table structure initialised by kvm_pgtable_stage2_init*().
> - * @addr:	Address that must be covered by the range.
> - * @prot:	Protection attributes that the range must be compatible with.
> - * @range:	Range structure used to limit the search space at call time and
> - *		that will hold the result.
> - *
> - * The offset of @addr within a page is ignored. An IPA is compatible with @prot
> - * iff its corresponding stage-2 page-table entry has default ownership and, if
> - * valid, is mapped with protection attributes identical to @prot.
> - *
> - * Return: 0 on success, negative error code on failure.
> - */
> -int kvm_pgtable_stage2_find_range(struct kvm_pgtable *pgt, u64 addr,
> -				  enum kvm_pgtable_prot prot,
> -				  struct kvm_mem_range *range);
>  #endif	/* __ARM64_KVM_PGTABLE_H__ */
> diff --git a/arch/arm64/kvm/hyp/nvhe/mem_protect.c b/arch/arm64/kvm/hyp/nvhe/mem_protect.c
> index 871149246f5f..01700a908bb7 100644
> --- a/arch/arm64/kvm/hyp/nvhe/mem_protect.c
> +++ b/arch/arm64/kvm/hyp/nvhe/mem_protect.c
> @@ -159,6 +159,11 @@ static int host_stage2_unmap_dev_all(void)
>  	return kvm_pgtable_stage2_unmap(pgt, addr, BIT(pgt->ia_bits) - addr);
>  }
>  
> +struct kvm_mem_range {
> +	u64 start;
> +	u64 end;
> +};
> +
>  static bool find_mem_range(phys_addr_t addr, struct kvm_mem_range *range)
>  {
>  	int cur, left = 0, right = hyp_memblock_nr;
> @@ -227,6 +232,38 @@ static inline int __host_stage2_idmap(u64 start, u64 end,
>  		__ret;							\
>  	 })
>
> +static int host_stage2_find_range(u64 addr, struct kvm_mem_range *range)

nit: I find 'find_range' a bit odd. We already have found a
range. We're just trying to narrow it down to something that fits in a
single block mapping. How about 'host_stage2_adjust_range'?

> +{
> +	u64 granule, start, end;
> +	kvm_pte_t pte;
> +	u32 level;
> +	int ret;
> +
> +	ret = kvm_pgtable_get_leaf(&host_kvm.pgt, addr, &pte, &level);
> +	if (ret)
> +		return ret;
> +
> +	if (kvm_pte_valid(pte))
> +		return -EAGAIN;
> +
> +	if (pte)
> +		return -EPERM;
> +
> +	do {
> +		granule = kvm_granule_size(level);
> +		start = ALIGN_DOWN(addr, granule);
> +		end = start + granule;
> +		level++;
> +	} while ((level < KVM_PGTABLE_MAX_LEVELS) &&
> +			(!kvm_level_supports_block_mapping(level) ||
> +			 start < range->start || range->end < end));
> +

This expression does my head in. You are trying to find the largest
block mapping that entirely fits in range, right? Can we just express
that directly (with a global negation for the purpose of the loop)?

	do {
		[...]
	} while (level < KVM_PGTABLE_MAX_LEVELS &&
		 !(kvm_level_supports_block_mapping(level) &&
		   start >= range->start &&
		   end <= range->end));

I personally find this much more readable, because it expresses the
condition we are looking for rather than a lot of conditions forcing
us to continue.

You could also use a kvm_mem_range for the iteration, and add a helper
that checks for the inclusion.

> +	range->start = start;
> +	range->end = end;
> +
> +	return 0;
> +}
> +
>  static int host_stage2_idmap(u64 addr)
>  {
>  	enum kvm_pgtable_prot prot = KVM_PGTABLE_PROT_R | KVM_PGTABLE_PROT_W;
> @@ -238,7 +275,7 @@ static int host_stage2_idmap(u64 addr)
>  		prot |= KVM_PGTABLE_PROT_X;
>  
>  	hyp_spin_lock(&host_kvm.lock);
> -	ret = kvm_pgtable_stage2_find_range(&host_kvm.pgt, addr, prot, &range);
> +	ret = host_stage2_find_range(addr, &range);
>  	if (ret)
>  		goto unlock;

Thanks,

	M.

-- 
Without deviation from the norm, progress is not possible.

  reply	other threads:[~2021-07-26 10:35 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-26  9:28 [PATCH v2 00/16] Track shared pages at EL2 in protected mode Quentin Perret
2021-07-26  9:28 ` [PATCH v2 01/16] KVM: arm64: Introduce helper to retrieve a PTE and its level Quentin Perret
2021-07-26  9:28 ` [PATCH v2 02/16] KVM: arm64: Provide the host_stage2_try() helper macro Quentin Perret
2021-07-26  9:28 ` [PATCH v2 03/16] KVM: arm64: Expose page-table helpers Quentin Perret
2021-07-26  9:28 ` [PATCH v2 04/16] KVM: arm64: Optimize host memory aborts Quentin Perret
2021-07-26 10:35   ` Marc Zyngier [this message]
2021-07-26 13:13     ` Quentin Perret
2021-07-26 13:24       ` Marc Zyngier
2021-07-26  9:28 ` [PATCH v2 05/16] KVM: arm64: Rename KVM_PTE_LEAF_ATTR_S2_IGNORED Quentin Perret
2021-07-26  9:28 ` [PATCH v2 06/16] KVM: arm64: Don't overwrite software bits with owner id Quentin Perret
2021-07-26  9:28 ` [PATCH v2 07/16] KVM: arm64: Tolerate re-creating hyp mappings to set software bits Quentin Perret
2021-07-26  9:28 ` [PATCH v2 08/16] KVM: arm64: Enable forcing page-level stage-2 mappings Quentin Perret
2021-07-26  9:28 ` [PATCH v2 09/16] KVM: arm64: Allow populating software bits Quentin Perret
2021-07-26  9:28 ` [PATCH v2 10/16] KVM: arm64: Add helpers to tag shared pages in SW bits Quentin Perret
2021-07-26  9:29 ` [PATCH v2 11/16] KVM: arm64: Introduce and export host_stage2_idmap_locked() Quentin Perret
2021-07-26  9:29 ` [PATCH v2 12/16] KVM: arm64: Mark host bss and rodata section as shared Quentin Perret
2021-07-28 12:14   ` Quentin Perret
2021-07-26  9:29 ` [PATCH v2 13/16] KVM: arm64: Enable retrieving protections attributes of PTEs Quentin Perret
2021-07-26  9:29 ` [PATCH v2 14/16] KVM: arm64: Refactor protected nVHE stage-1 locking Quentin Perret
2021-07-26  9:29 ` [PATCH v2 15/16] KVM: arm64: Restrict EL2 stage-1 changes in protected mode Quentin Perret
2021-07-26 11:27   ` Marc Zyngier
2021-07-26 12:55     ` Quentin Perret
2021-07-26  9:29 ` [PATCH v2 16/16] KVM: arm64: Make __pkvm_create_mappings static Quentin Perret

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87pmv5e529.wl-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=alexandru.elisei@arm.com \
    --cc=ardb@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=dbrazdil@google.com \
    --cc=james.morse@arm.com \
    --cc=kernel-team@android.com \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=qperret@google.com \
    --cc=qwandor@google.com \
    --cc=suzuki.poulose@arm.com \
    --cc=tabba@google.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).