Nagarjuna Kristam <nkristam@nvidia.com> writes:

> This patch series adds charger detect support on XUSB hardware used in
> Tegra210 and Tegra186 SoCs.
>
> This patchset is composed with :
>  - dt bindings of XUSB Pad Controller
>  - Tegra XUSB device mode driver to add vbus_draw support 
>  - Tegra PHY driver for charger detect support
>
> Tests done:
>  - Connect USB cable from ubuntu host to micro-B port of DUT to detect
>    SDP_TYPE charger
>  - Connect USB cable from external powered USB hub(which inturn connects
>    to ubuntu host) to micro-B port of DUT to detect CDP_TYPE charger.
>  - Connect USB cable from USB charger to micro-B port of DUT to detect
>    DCP_TYPE charger.
> DUT: Jetson-tx1, Jetson tx2.
>
> Nagarjuna Kristam (8):
>   dt-bindings: phy: tegra-xusb: Add charger-detect property
>   usb: gadget: tegra-xudc: Add vbus_draw support
>   phy: tegra: xusb: Add support for UTMI pad power control
>   phy: tegra: xusb: Add USB2 pad power control support for Tegra210
>   phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection
>   phy: tegra: xusb: Add support for charger detect
>   phy: tegra: xusb: Enable charger detect for Tegra186
>   phy: tegra: xusb: Enable charger detect for Tegra210

this doesn't apply cleanly. Could you resend after -rc1 is tagged?

-- 
balbi