Hi, Thierry Reding writes: > On Wed, Mar 04, 2020 at 08:01:00AM +0100, Greg Kroah-Hartman wrote: >> On Thu, Feb 27, 2020 at 06:32:26PM +0100, Thierry Reding wrote: >> > On Mon, Feb 17, 2020 at 09:51:30AM +0100, Thierry Reding wrote: >> > > On Mon, Feb 10, 2020 at 01:41:26PM +0530, Nagarjuna Kristam wrote: >> > > > This patch series adds OTG support on XUSB hardware used in Tegra210 and >> > > > Tegra186 SoCs. >> > > > >> > > > This patchset is composed with : >> > > > - dt bindings of XUSB Pad Controller >> > > > - dt bindings for XUSB device Driver >> > > > - Tegra PHY driver for usb-role-switch and usb-phy >> > > > - Tegra XUSB host mode driver to support OTG mode >> > > > - Tegra XUSB device mode driver to use usb-phy and multi device mode >> > > > - dts for XUSB pad controller >> > > > - dts for xudc for Jetson TX1 and TX2 >> > > > - dts for Jetson-TK1 >> > > > - dts for Jetson-Nano >> > > > >> > > > Tegra Pad controller driver register for role switch updates for >> > > > OTG/peripheral capable USB ports and adds usb-phy for that corresponding >> > > > USB ports. >> > > > >> > > > Host and Device mode drivers gets usb-phy from USB2's phy and registers >> > > > notifier for role changes to perform corresponding role tasks. >> > > > >> > > > Order of merging Patches: >> > > > Please merge DT changes first followed Tegra PHY driver changes and then >> > > > USB driver changes. >> > > >> > > Felipe, Greg, Kishon, >> > > >> > > Given the runtime dependencies between these various parts, I could pick >> > > these up into the Tegra tree if you provide an Acked-by. >> > >> > Ping. Are you guys okay if I pick these up into the Tegra tree? >> >> That's up to Felipe, I have no opinion :) > > Felipe, Kishon, > > I've picked up the device tree changes into the Tegra tree. Let me know > if you also want me to pick up the USB and PHY driver changes. Sorry for the super long delay, no problems if you want to pick it through your tree: Acked-by: Felipe Balbi -- balbi