Re: [PATCH v10 5/8] powerpc: Move remove_ima_buffer() to drivers/of/kexec.c

[Thiago Jung Bauermann <bauerman@linux.ibm.com>]

Lakshmi Ramasubramanian <nramas@linux.microsoft.com> writes:

> remove_ima_buffer() removes the chosen node "linux,ima-kexec-buffer"
> from the device tree and frees the memory reserved for carrying forward
> the IMA measurement logs on kexec. This function does not have
> architecture specific code, but is currently limited to powerpc.
>
> Move remove_ima_buffer() to "drivers/of/ima_kexec.c" so that it is

s/ima_kexec./kexec.c/

> accessible for other architectures as well.
>
> Co-developed-by: Prakhar Srivastava <prsriva@linux.microsoft.com>
> Signed-off-by: Prakhar Srivastava <prsriva@linux.microsoft.com>
> Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>

Looks good. Just minor comments below. Nevertheless:

Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>

> ---
>  arch/powerpc/include/asm/ima.h |  8 ++------
>  arch/powerpc/kexec/ima.c       | 26 --------------------------
>  drivers/of/kexec.c             | 29 +++++++++++++++++++++++++++++
>  include/linux/kexec.h          |  1 +
>  4 files changed, 32 insertions(+), 32 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/ima.h b/arch/powerpc/include/asm/ima.h
> index ead488cf3981..a2fc71bc3b23 100644
> --- a/arch/powerpc/include/asm/ima.h
> +++ b/arch/powerpc/include/asm/ima.h
> @@ -2,17 +2,13 @@
>  #ifndef _ASM_POWERPC_IMA_H
>  #define _ASM_POWERPC_IMA_H
>  
> +#include <linux/kexec.h>
> +
>  struct kimage;

When you include <linux/kexec.h>, there's no need anymore for the
`struct kimage` forward declaration so you can remove it.

>  
>  int ima_get_kexec_buffer(void **addr, size_t *size);
>  int ima_free_kexec_buffer(void);
>  
> -#ifdef CONFIG_IMA
> -void remove_ima_buffer(void *fdt, int chosen_node);
> -#else
> -static inline void remove_ima_buffer(void *fdt, int chosen_node) {}
> -#endif
> -

This patch introduces a slight behaviour change on powerpc when
CONFIG_IMA isn't set: since remove_ima_buffer() is now defined,
kexec_file_load() will remove the IMA kexec buffer when creating the FDT
for the next kernel. Before this patch, it will leave it there.

I think it's actually an improvement since a stale IMA kexec buffer
isn't useful and just wastes memory. This should be mentioned on the
commit message.

>  #ifdef CONFIG_IMA_KEXEC
>  int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr,
>  			      size_t size);
> diff --git a/arch/powerpc/kexec/ima.c b/arch/powerpc/kexec/ima.c
> index 906e8212435d..68017123b07d 100644
> --- a/arch/powerpc/kexec/ima.c
> +++ b/arch/powerpc/kexec/ima.c
> @@ -61,32 +61,6 @@ int ima_free_kexec_buffer(void)
>  	return memblock_free(addr, size);
>  }
>  
> -/**
> - * remove_ima_buffer - remove the IMA buffer property and reservation from @fdt
> - *
> - * @fdt: Flattened Device Tree to update
> - * @chosen_node: Offset to the chosen node in the device tree
> - *
> - * The IMA measurement buffer is of no use to a subsequent kernel, so we always
> - * remove it from the device tree.
> - */
> -void remove_ima_buffer(void *fdt, int chosen_node)
> -{
> -	int ret;
> -	unsigned long addr;
> -	size_t size;
> -
> -	ret = get_ima_kexec_buffer(fdt, chosen_node, &addr, &size);
> -	if (ret)
> -		return;
> -
> -	fdt_delprop(fdt, chosen_node, "linux,ima-kexec-buffer");
> -
> -	ret = delete_fdt_mem_rsv(fdt, addr, size);
> -	if (!ret)
> -		pr_debug("Removed old IMA buffer reservation.\n");
> -}
> -
>  #ifdef CONFIG_IMA_KEXEC
>  /**
>   * arch_ima_add_kexec_buffer - do arch-specific steps to add the IMA buffer
> diff --git a/drivers/of/kexec.c b/drivers/of/kexec.c
> index 516b86f7113a..42d16dfff78d 100644
> --- a/drivers/of/kexec.c
> +++ b/drivers/of/kexec.c
> @@ -129,3 +129,32 @@ int get_ima_kexec_buffer(void *fdt, int chosen_node,
>  
>  	return 0;
>  }
> +
> +/**
> + * remove_ima_buffer - remove the IMA buffer property and reservation from @fdt
> + *
> + * @fdt: Flattened Device Tree to update
> + * @chosen_node: Offset to the chosen node in the device tree
> + *
> + * The IMA measurement buffer is of no use to a subsequent kernel, so we always
> + * remove it from the device tree.
> + */
> +void remove_ima_buffer(void *fdt, int chosen_node)
> +{
> +	int ret;
> +	unsigned long addr;
> +	size_t size;
> +
> +	if (!IS_ENABLED(CONFIG_HAVE_IMA_KEXEC))
> +		return;
> +
> +	ret = get_ima_kexec_buffer(fdt, chosen_node, &addr, &size);
> +	if (ret)
> +		return;
> +
> +	fdt_delprop(fdt, chosen_node, "linux,ima-kexec-buffer");
> +
> +	ret = delete_fdt_mem_rsv(fdt, addr, size);
> +	if (!ret)
> +		pr_debug("Removed old IMA buffer reservation.\n");
> +}
> diff --git a/include/linux/kexec.h b/include/linux/kexec.h
> index 10ff704ab670..52a0efff184d 100644
> --- a/include/linux/kexec.h
> +++ b/include/linux/kexec.h
> @@ -411,6 +411,7 @@ static inline int kexec_crash_loaded(void) { return 0; }
>  extern int get_root_addr_size_cells(int *addr_cells, int *size_cells);
>  extern int get_ima_kexec_buffer(void *fdt, int chosen_node,
>  				unsigned long *addr, size_t *size);
> +extern void remove_ima_buffer(void *fdt, int chosen_node);
>  extern int delete_fdt_mem_rsv(void *fdt, unsigned long start,
>  			      unsigned long size);
>  #endif /* CONFIG_OF_FLATTREE */

Same comment as before: remove the `extern` keyword.

-- 
Thiago Jung Bauermann
IBM Linux Technology Center