Rob Herring writes: > Need to cc DT list if you want it in my queue. > > On Mon, Jan 23, 2017 at 6:38 PM, Eric Anholt wrote: >> These are part of the vc4 display pipeline. >> >> Signed-off-by: Eric Anholt >> --- >> .../devicetree/bindings/display/brcm,bcm-vc4.txt | 35 ++++++++++++++++++++++ >> 1 file changed, 35 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt >> index e2768703ac2b..34c7fddcea39 100644 >> --- a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt >> +++ b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt >> @@ -56,6 +56,18 @@ Required properties for V3D: >> - interrupts: The interrupt number >> See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt >> >> +Required properties for DSI: >> +- compatible: Should be "brcm,bcm2835-dsi0" or "brcm,bcm2835-dsi1" > > Are the blocks different? They are from the same lineage, but very different (old dsi0 is 1 lane, dsi1 is 4 lanes). You can see how much the registers move around and change in the dsi->port conditional blocks in the driver code.