[PATCH 0/2] Misc. rproc fixes around fixed memory region support

[PATCH 0/2] Misc. rproc fixes around fixed memory region support

[Suman Anna]

Hi Bjorn, Loic,

The following are two different fixes for the same commit 086d08725d34
("remoteproc: create vdev subdevice with specific dma memory pool") added
in 5.1 kernel. This has deviated from the core logic prior to the fixed
memory region support.

Patch 1 fixes an issue for some TI remoteproc drivers which always used
the same CMA pool for allocating vrings, vring buffers and carveouts. It
assigns the same pool (if there exists one) for the separated out
vdev device if there are no specific vdev memory regions, and is a
no-op otherwise.

Patch 2 restores the parenting hierarchy for rpmsg devices so that the
rproc handle can be retrieved by rpmsg drivers using the rproc_get_by_child()
API. 

Following is an example of how the rpmsg-client-sample devices looked on
our Davinci platforms:
1. On 4.19 kernel:
root@omapl138-lcdk# ls -l /sys/bus/rpmsg/devices/
lrwxrwxrwx    1 root     root             0 Nov 17 02:03 virtio0.rpmsg-client-sample.-1.50 -> ../../../devices/platform/11800000.dsp/remoteproc/remoteproc0/virtio0/virtio0.rpmsg-client-sample.-1.50
lrwxrwxrwx    1 root     root             0 Nov 17 02:03 virtio0.rpmsg-client-sample.-1.51 -> ../../../devices/platform/11800000.dsp/remoteproc/remoteproc0/virtio0/virtio0.rpmsg-client-sample.-1.51

2. After the commit 086d08725d34:
root@omapl138-lcdk# ls -l /sys/bus/rpmsg/devices/
lrwxrwxrwx    1 root     root             0 Nov 17 02:05 virtio0.rpmsg-client-sample.-1.50 -> ../../../devices/platform/11800000.dsp/11800000.dsp#vdev0buffer/virtio0/virtio0.rpmsg-client-sample.-1.50
lrwxrwxrwx    1 root     root             0 Nov 17 02:05 virtio0.rpmsg-client-sample.-1.51 -> ../../../devices/platform/11800000.dsp/11800000.dsp#vdev0buffer/virtio0/virtio0.rpmsg-client-sample.-1.51

3. With Patch 2:
root@omapl138-lcdk:/rpmsg/2020lts# ls -l /sys/bus/rpmsg/devices/
lrwxrwxrwx    1 root     root             0 Nov 17 02:00 virtio0.rpmsg-client-sample.-1.50 -> ../../../devices/platform/11800000.dsp/remoteproc/remoteproc0/remoteproc0#vdev0buffer/virtio0/virtio0.rpmsg-client-sample.-1.50
lrwxrwxrwx    1 root     root             0 Nov 17 02:00 virtio0.rpmsg-client-sample.-1.51 -> ../../../devices/platform/11800000.dsp/remoteproc/remoteproc0/remoteproc0#vdev0buffer/virtio0/virtio0.rpmsg-client-sample.-1.51

regards
Suman

Suman Anna (1):
  remoteproc: Fix and restore the parenting hierarchy for vdev

Tero Kristo (1):
  remoteproc: fall back to using parent memory pool if no dedicated
    available

 drivers/remoteproc/remoteproc_core.c   |  2 +-
 drivers/remoteproc/remoteproc_virtio.c | 10 ++++++++++
 2 files changed, 11 insertions(+), 1 deletion(-)

-- 
2.23.0

[PATCH 1/2] remoteproc: fall back to using parent memory pool if no dedicated available

[Suman Anna]

From: Tero Kristo <t-kristo@ti.com>

In some cases, like with OMAP remoteproc, we are not creating dedicated
memory pool for the virtio device. Instead, we use the same memory pool
for all shared memories. The current virtio memory pool handling forces
a split between these two, as a separate device is created for it,
causing memory to be allocated from bad location if the dedicated pool
is not available. Fix this by falling back to using the parent device
memory pool if dedicated is not available.

Fixes: 086d08725d34 ("remoteproc: create vdev subdevice with specific dma memory pool")
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
---
 drivers/remoteproc/remoteproc_virtio.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c
index 8c07cb2ca8ba..4723ebe574b8 100644
--- a/drivers/remoteproc/remoteproc_virtio.c
+++ b/drivers/remoteproc/remoteproc_virtio.c
@@ -368,6 +368,16 @@ int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id)
 				goto out;
 			}
 		}
+	} else {
+		struct device_node *np = rproc->dev.parent->of_node;
+
+		/*
+		 * If we don't have dedicated buffer, just attempt to
+		 * re-assign the reserved memory from our parent.
+		 * Failure is non-critical so don't check return value
+		 * either.
+		 */
+		of_reserved_mem_device_init_by_idx(dev, np, 0);
 	}
 
 	/* Allocate virtio device */
-- 
2.23.0

[PATCH 2/2] remoteproc: Fix and restore the parenting hierarchy for vdev

[Suman Anna]

The commit 086d08725d34 ("remoteproc: create vdev subdevice with specific
dma memory pool") has introduced a new vdev subdevice for each vdev
declared in the firmware resource table and made it as the parent for the
created virtio rpmsg devices instead of the previous remoteproc device.
This changed the overall parenting hierarchy for the rpmsg devices, which
were children of virtio devices, and does not allow the corresponding
rpmsg drivers to retrieve the parent rproc device through the
rproc_get_by_child() API.

Fix this by restoring the remoteproc device as the parent. The new vdev
subdevice can continue to inherit the DMA attributes from the remoteproc's
parent device (actual platform device).

Fixes: 086d08725d34 ("remoteproc: create vdev subdevice with specific dma memory pool")
Signed-off-by: Suman Anna <s-anna@ti.com>
---
 drivers/remoteproc/remoteproc_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 097f33e4f1f3..ba18f32bd0c4 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -510,7 +510,7 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
 
 	/* Initialise vdev subdevice */
 	snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index);
-	rvdev->dev.parent = rproc->dev.parent;
+	rvdev->dev.parent = &rproc->dev;
 	rvdev->dev.dma_pfn_offset = rproc->dev.parent->dma_pfn_offset;
 	rvdev->dev.release = rproc_rvdev_release;
 	dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name);
-- 
2.23.0

RE: [PATCH 1/2] remoteproc: fall back to using parent memory pool if no dedicated available

[Arnaud POULIQUEN]

Hi Suman,

> -----Original Message-----
> From: Suman Anna <s-anna@ti.com>
> Sent: jeudi 5 mars 2020 23:41
> To: Bjorn Andersson <bjorn.andersson@linaro.org>; Loic PALLARDY
> <loic.pallardy@st.com>
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>; Arnaud POULIQUEN
> <arnaud.pouliquen@st.com>; Tero Kristo <t-kristo@ti.com>; linux-
> remoteproc@vger.kernel.org; linux-kernel@vger.kernel.org; Suman Anna
> <s-anna@ti.com>
> Subject: [PATCH 1/2] remoteproc: fall back to using parent memory pool if no
> dedicated available
> 
> From: Tero Kristo <t-kristo@ti.com>
> 
> In some cases, like with OMAP remoteproc, we are not creating dedicated
> memory pool for the virtio device. Instead, we use the same memory pool
> for all shared memories. The current virtio memory pool handling forces a
> split between these two, as a separate device is created for it, causing
> memory to be allocated from bad location if the dedicated pool is not
> available. Fix this by falling back to using the parent device memory pool if
> dedicated is not available.
> 
> Fixes: 086d08725d34 ("remoteproc: create vdev subdevice with specific dma
> memory pool")
> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> Signed-off-by: Suman Anna <s-anna@ti.com>
> ---
>  drivers/remoteproc/remoteproc_virtio.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/remoteproc/remoteproc_virtio.c
> b/drivers/remoteproc/remoteproc_virtio.c
> index 8c07cb2ca8ba..4723ebe574b8 100644
> --- a/drivers/remoteproc/remoteproc_virtio.c
> +++ b/drivers/remoteproc/remoteproc_virtio.c
> @@ -368,6 +368,16 @@ int rproc_add_virtio_dev(struct rproc_vdev *rvdev,
> int id)
>  				goto out;
>  			}
>  		}
> +	} else {
> +		struct device_node *np = rproc->dev.parent->of_node;
> +
> +		/*
> +		 * If we don't have dedicated buffer, just attempt to
> +		 * re-assign the reserved memory from our parent.
> +		 * Failure is non-critical so don't check return value
> +		 * either.
> +		 */
> +		of_reserved_mem_device_init_by_idx(dev, np, 0);
>  	}
I aven't tested your patchset yet, but reviewing you code,  I wonder if you cannot declare your  memory pool
in your platform driver using  rproc_of_resm_mem_entry_init. Something like:
	struct device_node *mem_node;
	struct reserved_mem *rmem;

	mem_node = of_parse_phandle(dev->of_node, "memory-region", 0);
	rmem = of_reserved_mem_lookup(mem_node);
	mem = rproc_of_resm_mem_entry_init(dev, 0,
							   rmem->size,
							   rmem->base,
							   " vdev0buffer");

A main advantage of this implementation would be that the index of the memory region would not be hard coded to 0.

Regards,
Arnaud
> 
>  	/* Allocate virtio device */
> --
> 2.23.0

Re: [PATCH 2/2] remoteproc: Fix and restore the parenting hierarchy for vdev

[Mathieu Poirier]

Hi Suman,

On Thu, Mar 05, 2020 at 04:41:08PM -0600, Suman Anna wrote:
> The commit 086d08725d34 ("remoteproc: create vdev subdevice with specific
> dma memory pool") has introduced a new vdev subdevice for each vdev
> declared in the firmware resource table and made it as the parent for the
> created virtio rpmsg devices instead of the previous remoteproc device.
> This changed the overall parenting hierarchy for the rpmsg devices, which
> were children of virtio devices, and does not allow the corresponding
> rpmsg drivers to retrieve the parent rproc device through the
> rproc_get_by_child() API.
> 
> Fix this by restoring the remoteproc device as the parent. The new vdev
> subdevice can continue to inherit the DMA attributes from the remoteproc's
> parent device (actual platform device).
> 
> Fixes: 086d08725d34 ("remoteproc: create vdev subdevice with specific dma memory pool")
> Signed-off-by: Suman Anna <s-anna@ti.com>
> ---
>  drivers/remoteproc/remoteproc_core.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> index 097f33e4f1f3..ba18f32bd0c4 100644
> --- a/drivers/remoteproc/remoteproc_core.c
> +++ b/drivers/remoteproc/remoteproc_core.c
> @@ -510,7 +510,7 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
>  
>  	/* Initialise vdev subdevice */
>  	snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index);
> -	rvdev->dev.parent = rproc->dev.parent;
> +	rvdev->dev.parent = &rproc->dev;

I can see how it would not be possible to retrieve the parent rproc device since
rvdev->dev.parent was set to be platform device...

I wonder how the original change didn't blow up sysmon_probe() and potentially
other out-of-tree users of rproc_get_by_child().  It would be nice to have
someone from the QCOM team test your patch.

>  	rvdev->dev.dma_pfn_offset = rproc->dev.parent->dma_pfn_offset;
>  	rvdev->dev.release = rproc_rvdev_release;
>  	dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name);

Be mindful there might be fallouts from applying this patch since it does change
the location of the vdev under /sys/device/platform/ .

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>

> -- 
> 2.23.0
> 

Re: [PATCH 1/2] remoteproc: fall back to using parent memory pool if no dedicated available

[Tero Kristo]

On 13/03/2020 18:52, Arnaud POULIQUEN wrote:
> Hi Suman,
> 
>> -----Original Message-----
>> From: Suman Anna <s-anna@ti.com>
>> Sent: jeudi 5 mars 2020 23:41
>> To: Bjorn Andersson <bjorn.andersson@linaro.org>; Loic PALLARDY
>> <loic.pallardy@st.com>
>> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>; Arnaud POULIQUEN
>> <arnaud.pouliquen@st.com>; Tero Kristo <t-kristo@ti.com>; linux-
>> remoteproc@vger.kernel.org; linux-kernel@vger.kernel.org; Suman Anna
>> <s-anna@ti.com>
>> Subject: [PATCH 1/2] remoteproc: fall back to using parent memory pool if no
>> dedicated available
>>
>> From: Tero Kristo <t-kristo@ti.com>
>>
>> In some cases, like with OMAP remoteproc, we are not creating dedicated
>> memory pool for the virtio device. Instead, we use the same memory pool
>> for all shared memories. The current virtio memory pool handling forces a
>> split between these two, as a separate device is created for it, causing
>> memory to be allocated from bad location if the dedicated pool is not
>> available. Fix this by falling back to using the parent device memory pool if
>> dedicated is not available.
>>
>> Fixes: 086d08725d34 ("remoteproc: create vdev subdevice with specific dma
>> memory pool")
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> Signed-off-by: Suman Anna <s-anna@ti.com>
>> ---
>>   drivers/remoteproc/remoteproc_virtio.c | 10 ++++++++++
>>   1 file changed, 10 insertions(+)
>>
>> diff --git a/drivers/remoteproc/remoteproc_virtio.c
>> b/drivers/remoteproc/remoteproc_virtio.c
>> index 8c07cb2ca8ba..4723ebe574b8 100644
>> --- a/drivers/remoteproc/remoteproc_virtio.c
>> +++ b/drivers/remoteproc/remoteproc_virtio.c
>> @@ -368,6 +368,16 @@ int rproc_add_virtio_dev(struct rproc_vdev *rvdev,
>> int id)
>>   				goto out;
>>   			}
>>   		}
>> +	} else {
>> +		struct device_node *np = rproc->dev.parent->of_node;
>> +
>> +		/*
>> +		 * If we don't have dedicated buffer, just attempt to
>> +		 * re-assign the reserved memory from our parent.
>> +		 * Failure is non-critical so don't check return value
>> +		 * either.
>> +		 */
>> +		of_reserved_mem_device_init_by_idx(dev, np, 0);
>>   	}
> I aven't tested your patchset yet, but reviewing you code,  I wonder if you cannot declare your  memory pool
> in your platform driver using  rproc_of_resm_mem_entry_init. Something like:
> 	struct device_node *mem_node;
> 	struct reserved_mem *rmem;
> 
> 	mem_node = of_parse_phandle(dev->of_node, "memory-region", 0);
> 	rmem = of_reserved_mem_lookup(mem_node);
> 	mem = rproc_of_resm_mem_entry_init(dev, 0,
> 							   rmem->size,
> 							   rmem->base,
> 							   " vdev0buffer");
> 
> A main advantage of this implementation would be that the index of the memory region would not be hard coded to 0.

It seems like that would work for us also, and thus this patch can be 
dropped. See the following patch. Suman, any comments on this? If this 
seems acceptable, I can send this as a proper patch to the list.

------

From: Tero Kristo <t-kristo@ti.com>
Date: Wed, 18 Mar 2020 11:22:58 +0200
Subject: [PATCH] remoteproc/omap: Allocate vdev0buffer memory from
  reserved memory pool

Since 086d08725d34 ("remoteproc: create vdev subdevice with specific dma
memory pool"), remoteprocs must allocate separate vdev memory buffer. As
OMAP remoteproc does not do this yet, the memory gets allocated from
default DMA pool, and this memory is not suitable for the use. To fix
the issue, map the vdev0buffer to use the same device reserved memory
pool as the rest of the remoteproc.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
  drivers/remoteproc/omap_remoteproc.c | 16 ++++++++++++++++
  1 file changed, 16 insertions(+)

diff --git a/drivers/remoteproc/omap_remoteproc.c 
b/drivers/remoteproc/omap_remoteproc.c
index 29d19a608af8..024330e31a9e 100644
--- a/drivers/remoteproc/omap_remoteproc.c
+++ b/drivers/remoteproc/omap_remoteproc.c
@@ -1273,6 +1273,9 @@ static int omap_rproc_probe(struct platform_device 
*pdev)
  	const char *firmware;
  	int ret;
  	struct reset_control *reset;
+	struct device_node *mem_node;
+	struct reserved_mem *rmem;
+	struct rproc_mem_entry *mem;

  	if (!np) {
  		dev_err(&pdev->dev, "only DT-based devices are supported\n");
@@ -1335,6 +1338,19 @@ static int omap_rproc_probe(struct 
platform_device *pdev)
  		dev_warn(&pdev->dev, "device does not have specific CMA pool.\n");
  		dev_warn(&pdev->dev, "Typically this should be provided,\n");
  		dev_warn(&pdev->dev, "only omit if you know what you are doing.\n");
+	} else {
+		mem_node = of_parse_phandle(pdev->dev.of_node, "memory-region",
+					    0);
+		rmem = of_reserved_mem_lookup(mem_node);
+		mem = rproc_of_resm_mem_entry_init(&pdev->dev, 0, rmem->size,
+						   rmem->base, "vdev0buffer");
+
+		if (!mem) {
+			ret = -ENOMEM;
+			goto release_mem;
+		}
+
+		rproc_add_carveout(rproc, mem);
  	}

  	platform_set_drvdata(pdev, rproc);
-- 
2.17.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

Re: [PATCH 2/2] remoteproc: Fix and restore the parenting hierarchy for vdev

[Suman Anna]

Hi Mathieu,

On 3/17/20 1:05 PM, Mathieu Poirier wrote:
> Hi Suman,
> 
> On Thu, Mar 05, 2020 at 04:41:08PM -0600, Suman Anna wrote:
>> The commit 086d08725d34 ("remoteproc: create vdev subdevice with specific
>> dma memory pool") has introduced a new vdev subdevice for each vdev
>> declared in the firmware resource table and made it as the parent for the
>> created virtio rpmsg devices instead of the previous remoteproc device.
>> This changed the overall parenting hierarchy for the rpmsg devices, which
>> were children of virtio devices, and does not allow the corresponding
>> rpmsg drivers to retrieve the parent rproc device through the
>> rproc_get_by_child() API.
>>
>> Fix this by restoring the remoteproc device as the parent. The new vdev
>> subdevice can continue to inherit the DMA attributes from the remoteproc's
>> parent device (actual platform device).
>>
>> Fixes: 086d08725d34 ("remoteproc: create vdev subdevice with specific dma memory pool")
>> Signed-off-by: Suman Anna <s-anna@ti.com>
>> ---
>>  drivers/remoteproc/remoteproc_core.c | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
>> index 097f33e4f1f3..ba18f32bd0c4 100644
>> --- a/drivers/remoteproc/remoteproc_core.c
>> +++ b/drivers/remoteproc/remoteproc_core.c
>> @@ -510,7 +510,7 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
>>  
>>  	/* Initialise vdev subdevice */
>>  	snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index);
>> -	rvdev->dev.parent = rproc->dev.parent;
>> +	rvdev->dev.parent = &rproc->dev;
> 
> I can see how it would not be possible to retrieve the parent rproc device since
> rvdev->dev.parent was set to be platform device...
> 
> I wonder how the original change didn't blow up sysmon_probe() and potentially
> other out-of-tree users of rproc_get_by_child().  

QCOM code uses SMD transport, and not virtio_rpmsg transport, and the
parent-child relationship is direct rproc subdevices which are added in
their platform drivers directly. This affects only virtio-rpmsg clients.
Please see qcom_add_smd_subdev().

It would be nice to have
> someone from the QCOM team test your patch.
> 
>>  	rvdev->dev.dma_pfn_offset = rproc->dev.parent->dma_pfn_offset;
>>  	rvdev->dev.release = rproc_rvdev_release;
>>  	dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name);
> 
> Be mindful there might be fallouts from applying this patch since it does change
> the location of the vdev under /sys/device/platform/ .
> 
> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Thanks for the review.

regards
Suman

Re: [PATCH 1/2] remoteproc: fall back to using parent memory pool if no dedicated available

[Suman Anna]

Hi Arnaud,

On 3/18/20 4:37 AM, Tero Kristo wrote:
> On 13/03/2020 18:52, Arnaud POULIQUEN wrote:
>> Hi Suman,
>>
>>> -----Original Message-----
>>> From: Suman Anna <s-anna@ti.com>
>>> Sent: jeudi 5 mars 2020 23:41
>>> To: Bjorn Andersson <bjorn.andersson@linaro.org>; Loic PALLARDY
>>> <loic.pallardy@st.com>
>>> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>; Arnaud POULIQUEN
>>> <arnaud.pouliquen@st.com>; Tero Kristo <t-kristo@ti.com>; linux-
>>> remoteproc@vger.kernel.org; linux-kernel@vger.kernel.org; Suman Anna
>>> <s-anna@ti.com>
>>> Subject: [PATCH 1/2] remoteproc: fall back to using parent memory
>>> pool if no
>>> dedicated available
>>>
>>> From: Tero Kristo <t-kristo@ti.com>
>>>
>>> In some cases, like with OMAP remoteproc, we are not creating dedicated
>>> memory pool for the virtio device. Instead, we use the same memory pool
>>> for all shared memories. The current virtio memory pool handling
>>> forces a
>>> split between these two, as a separate device is created for it, causing
>>> memory to be allocated from bad location if the dedicated pool is not
>>> available. Fix this by falling back to using the parent device memory
>>> pool if
>>> dedicated is not available.
>>>
>>> Fixes: 086d08725d34 ("remoteproc: create vdev subdevice with specific
>>> dma
>>> memory pool")
>>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>>> Signed-off-by: Suman Anna <s-anna@ti.com>
>>> ---
>>>   drivers/remoteproc/remoteproc_virtio.c | 10 ++++++++++
>>>   1 file changed, 10 insertions(+)
>>>
>>> diff --git a/drivers/remoteproc/remoteproc_virtio.c
>>> b/drivers/remoteproc/remoteproc_virtio.c
>>> index 8c07cb2ca8ba..4723ebe574b8 100644
>>> --- a/drivers/remoteproc/remoteproc_virtio.c
>>> +++ b/drivers/remoteproc/remoteproc_virtio.c
>>> @@ -368,6 +368,16 @@ int rproc_add_virtio_dev(struct rproc_vdev *rvdev,
>>> int id)
>>>                   goto out;
>>>               }
>>>           }
>>> +    } else {
>>> +        struct device_node *np = rproc->dev.parent->of_node;
>>> +
>>> +        /*
>>> +         * If we don't have dedicated buffer, just attempt to
>>> +         * re-assign the reserved memory from our parent.
>>> +         * Failure is non-critical so don't check return value
>>> +         * either.
>>> +         */
>>> +        of_reserved_mem_device_init_by_idx(dev, np, 0);
>>>       }
>> I aven't tested your patchset yet, but reviewing you code,  I wonder
>> if you cannot declare your  memory pool
>> in your platform driver using  rproc_of_resm_mem_entry_init. 

The patch actually provides a fallback option and even now this path is
entered only when there are no dedicated pools. This restores the code
to how the allocations were made prior to the fixed memory carveout
changes. If the remoteproc drivers themselves do not use any DMA/CMA
pools, then nothing changes and allocations continue to be made from the
global pools.

Something
>> like:
>>     struct device_node *mem_node;
>>     struct reserved_mem *rmem;
>>
>>     mem_node = of_parse_phandle(dev->of_node, "memory-region", 0);
>>     rmem = of_reserved_mem_lookup(mem_node);
>>     mem = rproc_of_resm_mem_entry_init(dev, 0,
>>                                rmem->size,
>>                                rmem->base,
>>                                " vdev0buffer");
>>
>> A main advantage of this implementation would be that the index of the
>> memory region would not be hard coded to 0.

The 0 is the default (equivalent to of_reserved_mem_device_init(), but
we can't use that function here since dev and np are different).

While your suggestion does work for us, this does bring in the knowledge
of how many vdevs a remoteproc driver is supporting. It is fine for
remoteproc drivers that are designed exactly for a known number of vdevs
and/or fixed pools to use the above function, but every other remoteproc
driver would have to repeat similar code. Given that the number of vdevs
are currently defined through the resource table and can change from
firmware to firmware, I think this fallback option patch is the better
scalable solution.

Let's see if others have any opinion on this.

regards
Suman

> 
> It seems like that would work for us also, and thus this patch can be
> dropped. See the following patch. Suman, any comments on this? If this
> seems acceptable, I can send this as a proper patch to the list.
> 
> ------
> 
> From: Tero Kristo <t-kristo@ti.com>
> Date: Wed, 18 Mar 2020 11:22:58 +0200
> Subject: [PATCH] remoteproc/omap: Allocate vdev0buffer memory from
>  reserved memory pool
> 
> Since 086d08725d34 ("remoteproc: create vdev subdevice with specific dma
> memory pool"), remoteprocs must allocate separate vdev memory buffer. As
> OMAP remoteproc does not do this yet, the memory gets allocated from
> default DMA pool, and this memory is not suitable for the use. To fix
> the issue, map the vdev0buffer to use the same device reserved memory
> pool as the rest of the remoteproc.
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> ---
>  drivers/remoteproc/omap_remoteproc.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/remoteproc/omap_remoteproc.c
> b/drivers/remoteproc/omap_remoteproc.c
> index 29d19a608af8..024330e31a9e 100644
> --- a/drivers/remoteproc/omap_remoteproc.c
> +++ b/drivers/remoteproc/omap_remoteproc.c
> @@ -1273,6 +1273,9 @@ static int omap_rproc_probe(struct platform_device
> *pdev)
>      const char *firmware;
>      int ret;
>      struct reset_control *reset;
> +    struct device_node *mem_node;
> +    struct reserved_mem *rmem;
> +    struct rproc_mem_entry *mem;
> 
>      if (!np) {
>          dev_err(&pdev->dev, "only DT-based devices are supported\n");
> @@ -1335,6 +1338,19 @@ static int omap_rproc_probe(struct
> platform_device *pdev)
>          dev_warn(&pdev->dev, "device does not have specific CMA pool.\n");
>          dev_warn(&pdev->dev, "Typically this should be provided,\n");
>          dev_warn(&pdev->dev, "only omit if you know what you are
> doing.\n");
> +    } else {
> +        mem_node = of_parse_phandle(pdev->dev.of_node, "memory-region",
> +                        0);
> +        rmem = of_reserved_mem_lookup(mem_node);
> +        mem = rproc_of_resm_mem_entry_init(&pdev->dev, 0, rmem->size,
> +                           rmem->base, "vdev0buffer");
> +
> +        if (!mem) {
> +            ret = -ENOMEM;
> +            goto release_mem;
> +        }
> +
> +        rproc_add_carveout(rproc, mem);
>      }
> 
>      platform_set_drvdata(pdev, rproc);

Re: [PATCH 2/2] remoteproc: Fix and restore the parenting hierarchy for vdev

[Mathieu Poirier]

On Wed, 18 Mar 2020 at 09:00, Suman Anna <s-anna@ti.com> wrote:
>
> Hi Mathieu,
>
> On 3/17/20 1:05 PM, Mathieu Poirier wrote:
> > Hi Suman,
> >
> > On Thu, Mar 05, 2020 at 04:41:08PM -0600, Suman Anna wrote:
> >> The commit 086d08725d34 ("remoteproc: create vdev subdevice with specific
> >> dma memory pool") has introduced a new vdev subdevice for each vdev
> >> declared in the firmware resource table and made it as the parent for the
> >> created virtio rpmsg devices instead of the previous remoteproc device.
> >> This changed the overall parenting hierarchy for the rpmsg devices, which
> >> were children of virtio devices, and does not allow the corresponding
> >> rpmsg drivers to retrieve the parent rproc device through the
> >> rproc_get_by_child() API.
> >>
> >> Fix this by restoring the remoteproc device as the parent. The new vdev
> >> subdevice can continue to inherit the DMA attributes from the remoteproc's
> >> parent device (actual platform device).
> >>
> >> Fixes: 086d08725d34 ("remoteproc: create vdev subdevice with specific dma memory pool")
> >> Signed-off-by: Suman Anna <s-anna@ti.com>
> >> ---
> >>  drivers/remoteproc/remoteproc_core.c | 2 +-
> >>  1 file changed, 1 insertion(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> >> index 097f33e4f1f3..ba18f32bd0c4 100644
> >> --- a/drivers/remoteproc/remoteproc_core.c
> >> +++ b/drivers/remoteproc/remoteproc_core.c
> >> @@ -510,7 +510,7 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
> >>
> >>      /* Initialise vdev subdevice */
> >>      snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index);
> >> -    rvdev->dev.parent = rproc->dev.parent;
> >> +    rvdev->dev.parent = &rproc->dev;
> >
> > I can see how it would not be possible to retrieve the parent rproc device since
> > rvdev->dev.parent was set to be platform device...
> >
> > I wonder how the original change didn't blow up sysmon_probe() and potentially
> > other out-of-tree users of rproc_get_by_child().
>
> QCOM code uses SMD transport, and not virtio_rpmsg transport, and the
> parent-child relationship is direct rproc subdevices which are added in
> their platform drivers directly. This affects only virtio-rpmsg clients.
> Please see qcom_add_smd_subdev().

Thanks for the clarification, I didn't go that far in my investigation.

>
> It would be nice to have
> > someone from the QCOM team test your patch.
> >
> >>      rvdev->dev.dma_pfn_offset = rproc->dev.parent->dma_pfn_offset;
> >>      rvdev->dev.release = rproc_rvdev_release;
> >>      dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name);
> >
> > Be mindful there might be fallouts from applying this patch since it does change
> > the location of the vdev under /sys/device/platform/ .
> >
> > Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
>
> Thanks for the review.
>
> regards
> Suman

Re: [PATCH 2/2] remoteproc: Fix and restore the parenting hierarchy for vdev

[Arnaud POULIQUEN]

Hi Suman, Mathieu,

On 3/17/20 7:05 PM, Mathieu Poirier wrote:
> Hi Suman,
> 
> On Thu, Mar 05, 2020 at 04:41:08PM -0600, Suman Anna wrote:
>> The commit 086d08725d34 ("remoteproc: create vdev subdevice with specific
>> dma memory pool") has introduced a new vdev subdevice for each vdev
>> declared in the firmware resource table and made it as the parent for the
>> created virtio rpmsg devices instead of the previous remoteproc device.
>> This changed the overall parenting hierarchy for the rpmsg devices, which
>> were children of virtio devices, and does not allow the corresponding
>> rpmsg drivers to retrieve the parent rproc device through the
>> rproc_get_by_child() API.
>>
>> Fix this by restoring the remoteproc device as the parent. The new vdev
>> subdevice can continue to inherit the DMA attributes from the remoteproc's
>> parent device (actual platform device).
>>
>> Fixes: 086d08725d34 ("remoteproc: create vdev subdevice with specific dma memory pool")
>> Signed-off-by: Suman Anna <s-anna@ti.com>
>> ---
>>  drivers/remoteproc/remoteproc_core.c | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
>> index 097f33e4f1f3..ba18f32bd0c4 100644
>> --- a/drivers/remoteproc/remoteproc_core.c
>> +++ b/drivers/remoteproc/remoteproc_core.c
>> @@ -510,7 +510,7 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
>>  
>>  	/* Initialise vdev subdevice */
>>  	snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index);
>> -	rvdev->dev.parent = rproc->dev.parent;
>> +	rvdev->dev.parent = &rproc->dev;
> 
> I can see how it would not be possible to retrieve the parent rproc device since
> rvdev->dev.parent was set to be platform device...

In rpmsg_virtio_bus.c [1] the vdev buffers are allocated in a memory region using a dma_alloc_coherent
So the buffers are allocated in the platform driver memory region if declared, else in the default memory region. 

According to  086d08725d34 ("remoteproc: create vdev subdevice with specific dma memory pool"),
A patch has been integrated in rpmsg framework:  d999b622fcfb3 ("rpmsg: virtio: allocate buffer from parent")

-	bufs_va = dma_alloc_coherent(vdev->dev.parent->parent,
+	bufs_va = dma_alloc_coherent(vdev->dev.parent,

So in term of parent-child relationchip the Loic's patches seem coherent, and don't affect parenting hierarchy
for the rpmsg bus.

So It seems to me that this patch breaks the relationship between the rpmsg bus
and the rproc platform driver, at least concerning the buffer allocation.
But on the other side this patch doesn't introduce regression for rpmsg bus on my platform... 

I probably missed something important because i can not figure out how this patch don't introduce regression.
Can the rproc->dev inherits from the rproc platform device in term of memory regions?

[1]: https://elixir.bootlin.com/linux/latest/source/drivers/rpmsg/virtio_rpmsg_bus.c#L915
[2]: https://lkml.org/lkml/2018/11/30/180

> 
> I wonder how the original change didn't blow up sysmon_probe() and potentially
> other out-of-tree users of rproc_get_by_child().  It would be nice to have
> someone from the QCOM team test your patch.

You are right the rproc platform device is now the grand parent of a rpmsg device, while before it was the parent.
Anyway, does it makes sense to have this kind of dependency between rpmsg device and rproc device?
The fix could be done in the rpmsg device that would be rproc dependent (if out-of-tree).  
The alternative could be to declare the rpmsg device in device tree as child of the rproc platform device...

Regards,
Arnaud

> 
>>  	rvdev->dev.dma_pfn_offset = rproc->dev.parent->dma_pfn_offset;
>>  	rvdev->dev.release = rproc_rvdev_release;
>>  	dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name);
> 
> Be mindful there might be fallouts from applying this patch since it does change
> the location of the vdev under /sys/device/platform/ .
> 
> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> 
>> -- 
>> 2.23.0
>>

Re: [PATCH 1/2] remoteproc: fall back to using parent memory pool if no dedicated available

[Arnaud POULIQUEN]

Hi Suman,

On 3/18/20 5:19 PM, Suman Anna wrote:
> Hi Arnaud,
> 
> On 3/18/20 4:37 AM, Tero Kristo wrote:
>> On 13/03/2020 18:52, Arnaud POULIQUEN wrote:
>>> Hi Suman,
>>>
>>>> -----Original Message-----
>>>> From: Suman Anna <s-anna@ti.com>
>>>> Sent: jeudi 5 mars 2020 23:41
>>>> To: Bjorn Andersson <bjorn.andersson@linaro.org>; Loic PALLARDY
>>>> <loic.pallardy@st.com>
>>>> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>; Arnaud POULIQUEN
>>>> <arnaud.pouliquen@st.com>; Tero Kristo <t-kristo@ti.com>; linux-
>>>> remoteproc@vger.kernel.org; linux-kernel@vger.kernel.org; Suman Anna
>>>> <s-anna@ti.com>
>>>> Subject: [PATCH 1/2] remoteproc: fall back to using parent memory
>>>> pool if no
>>>> dedicated available
>>>>
>>>> From: Tero Kristo <t-kristo@ti.com>
>>>>
>>>> In some cases, like with OMAP remoteproc, we are not creating dedicated
>>>> memory pool for the virtio device. Instead, we use the same memory pool
>>>> for all shared memories. The current virtio memory pool handling
>>>> forces a
>>>> split between these two, as a separate device is created for it, causing
>>>> memory to be allocated from bad location if the dedicated pool is not
>>>> available. Fix this by falling back to using the parent device memory
>>>> pool if
>>>> dedicated is not available.
>>>>
>>>> Fixes: 086d08725d34 ("remoteproc: create vdev subdevice with specific
>>>> dma
>>>> memory pool")
>>>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>>>> Signed-off-by: Suman Anna <s-anna@ti.com>
>>>> ---
>>>>   drivers/remoteproc/remoteproc_virtio.c | 10 ++++++++++
>>>>   1 file changed, 10 insertions(+)
>>>>
>>>> diff --git a/drivers/remoteproc/remoteproc_virtio.c
>>>> b/drivers/remoteproc/remoteproc_virtio.c
>>>> index 8c07cb2ca8ba..4723ebe574b8 100644
>>>> --- a/drivers/remoteproc/remoteproc_virtio.c
>>>> +++ b/drivers/remoteproc/remoteproc_virtio.c
>>>> @@ -368,6 +368,16 @@ int rproc_add_virtio_dev(struct rproc_vdev *rvdev,
>>>> int id)
>>>>                   goto out;
>>>>               }
>>>>           }
>>>> +    } else {
>>>> +        struct device_node *np = rproc->dev.parent->of_node;
>>>> +
>>>> +        /*
>>>> +         * If we don't have dedicated buffer, just attempt to
>>>> +         * re-assign the reserved memory from our parent.
>>>> +         * Failure is non-critical so don't check return value
>>>> +         * either.
>>>> +         */
>>>> +        of_reserved_mem_device_init_by_idx(dev, np, 0);
>>>>       }
>>> I aven't tested your patchset yet, but reviewing you code,  I wonder
>>> if you cannot declare your  memory pool
>>> in your platform driver using  rproc_of_resm_mem_entry_init. 
> 
> The patch actually provides a fallback option and even now this path is
> entered only when there are no dedicated pools. This restores the code
> to how the allocations were made prior to the fixed memory carveout
> changes. If the remoteproc drivers themselves do not use any DMA/CMA
> pools, then nothing changes and allocations continue to be made from the
> global pools.

If there is no dedicated pool, no need to associate a memory pool here,
The allocation by default should be done in the global pools if not pool
is associated to the vdev.
Only a global pool assigned to a rproc is not treated as you mention.    

> 
> Something
>>> like:
>>>     struct device_node *mem_node;
>>>     struct reserved_mem *rmem;
>>>
>>>     mem_node = of_parse_phandle(dev->of_node, "memory-region", 0);
>>>     rmem = of_reserved_mem_lookup(mem_node);
>>>     mem = rproc_of_resm_mem_entry_init(dev, 0,
>>>                                rmem->size,
>>>                                rmem->base,
>>>                                " vdev0buffer");
>>>
>>> A main advantage of this implementation would be that the index of the
>>> memory region would not be hard coded to 0.
> 
> The 0 is the default (equivalent to of_reserved_mem_device_init(), but
> we can't use that function here since dev and np are different).
> 
> While your suggestion does work for us, this does bring in the knowledge
> of how many vdevs a remoteproc driver is supporting. It is fine for
> remoteproc drivers that are designed exactly for a known number of vdevs
> and/or fixed pools to use the above function, but every other remoteproc
> driver would have to repeat similar code. Given that the number of vdevs
> are currently defined through the resource table and can change from
> firmware to firmware, I think this fallback option patch is the better
> scalable solution.

Yes you right this supposes that the number of vdev is limited and known, so
not enough scalable.

From MPOV what is restrictive here is the index forced to 0. 
This implementation would impose to declare first the global memory for the vdevs 
then other memory regions (e.g memory reserved for firmware code loading). 
Need at minimum to be documented this restriction...

A alternative would be to use resource table carveout to declare region, but 
this would probably break compatibility with legacy remote firmware...

A second alternative could be to define a specific name for a rproc default memory pool.
and then look for it. 

Regards,
Arnaud

> 
> Let's see if others have any opinion on this.
> 
> regards
> Suman
> 
>>
>> It seems like that would work for us also, and thus this patch can be
>> dropped. See the following patch. Suman, any comments on this? If this
>> seems acceptable, I can send this as a proper patch to the list.
>>
>> ------
>>
>> From: Tero Kristo <t-kristo@ti.com>
>> Date: Wed, 18 Mar 2020 11:22:58 +0200
>> Subject: [PATCH] remoteproc/omap: Allocate vdev0buffer memory from
>>  reserved memory pool
>>
>> Since 086d08725d34 ("remoteproc: create vdev subdevice with specific dma
>> memory pool"), remoteprocs must allocate separate vdev memory buffer. As
>> OMAP remoteproc does not do this yet, the memory gets allocated from
>> default DMA pool, and this memory is not suitable for the use. To fix
>> the issue, map the vdev0buffer to use the same device reserved memory
>> pool as the rest of the remoteproc.
>>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> ---
>>  drivers/remoteproc/omap_remoteproc.c | 16 ++++++++++++++++
>>  1 file changed, 16 insertions(+)
>>
>> diff --git a/drivers/remoteproc/omap_remoteproc.c
>> b/drivers/remoteproc/omap_remoteproc.c
>> index 29d19a608af8..024330e31a9e 100644
>> --- a/drivers/remoteproc/omap_remoteproc.c
>> +++ b/drivers/remoteproc/omap_remoteproc.c
>> @@ -1273,6 +1273,9 @@ static int omap_rproc_probe(struct platform_device
>> *pdev)
>>      const char *firmware;
>>      int ret;
>>      struct reset_control *reset;
>> +    struct device_node *mem_node;
>> +    struct reserved_mem *rmem;
>> +    struct rproc_mem_entry *mem;
>>
>>      if (!np) {
>>          dev_err(&pdev->dev, "only DT-based devices are supported\n");
>> @@ -1335,6 +1338,19 @@ static int omap_rproc_probe(struct
>> platform_device *pdev)
>>          dev_warn(&pdev->dev, "device does not have specific CMA pool.\n");
>>          dev_warn(&pdev->dev, "Typically this should be provided,\n");
>>          dev_warn(&pdev->dev, "only omit if you know what you are
>> doing.\n");
>> +    } else {
>> +        mem_node = of_parse_phandle(pdev->dev.of_node, "memory-region",
>> +                        0);
>> +        rmem = of_reserved_mem_lookup(mem_node);
>> +        mem = rproc_of_resm_mem_entry_init(&pdev->dev, 0, rmem->size,
>> +                           rmem->base, "vdev0buffer");
>> +
>> +        if (!mem) {
>> +            ret = -ENOMEM;
>> +            goto release_mem;
>> +        }
>> +
>> +        rproc_add_carveout(rproc, mem);
>>      }
>>
>>      platform_set_drvdata(pdev, rproc);
> 

Re: [PATCH 1/2] remoteproc: fall back to using parent memory pool if no dedicated available

[Suman Anna]

Hi Arnaud,

On 3/18/20 12:29 PM, Arnaud POULIQUEN wrote:
> Hi Suman,
> 
> On 3/18/20 5:19 PM, Suman Anna wrote:
>> Hi Arnaud,
>>
>> On 3/18/20 4:37 AM, Tero Kristo wrote:
>>> On 13/03/2020 18:52, Arnaud POULIQUEN wrote:
>>>> Hi Suman,
>>>>
>>>>> -----Original Message-----
>>>>> From: Suman Anna <s-anna@ti.com>
>>>>> Sent: jeudi 5 mars 2020 23:41
>>>>> To: Bjorn Andersson <bjorn.andersson@linaro.org>; Loic PALLARDY
>>>>> <loic.pallardy@st.com>
>>>>> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>; Arnaud POULIQUEN
>>>>> <arnaud.pouliquen@st.com>; Tero Kristo <t-kristo@ti.com>; linux-
>>>>> remoteproc@vger.kernel.org; linux-kernel@vger.kernel.org; Suman Anna
>>>>> <s-anna@ti.com>
>>>>> Subject: [PATCH 1/2] remoteproc: fall back to using parent memory
>>>>> pool if no
>>>>> dedicated available
>>>>>
>>>>> From: Tero Kristo <t-kristo@ti.com>
>>>>>
>>>>> In some cases, like with OMAP remoteproc, we are not creating dedicated
>>>>> memory pool for the virtio device. Instead, we use the same memory pool
>>>>> for all shared memories. The current virtio memory pool handling
>>>>> forces a
>>>>> split between these two, as a separate device is created for it, causing
>>>>> memory to be allocated from bad location if the dedicated pool is not
>>>>> available. Fix this by falling back to using the parent device memory
>>>>> pool if
>>>>> dedicated is not available.
>>>>>
>>>>> Fixes: 086d08725d34 ("remoteproc: create vdev subdevice with specific
>>>>> dma
>>>>> memory pool")
>>>>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>>>>> Signed-off-by: Suman Anna <s-anna@ti.com>
>>>>> ---
>>>>>   drivers/remoteproc/remoteproc_virtio.c | 10 ++++++++++
>>>>>   1 file changed, 10 insertions(+)
>>>>>
>>>>> diff --git a/drivers/remoteproc/remoteproc_virtio.c
>>>>> b/drivers/remoteproc/remoteproc_virtio.c
>>>>> index 8c07cb2ca8ba..4723ebe574b8 100644
>>>>> --- a/drivers/remoteproc/remoteproc_virtio.c
>>>>> +++ b/drivers/remoteproc/remoteproc_virtio.c
>>>>> @@ -368,6 +368,16 @@ int rproc_add_virtio_dev(struct rproc_vdev *rvdev,
>>>>> int id)
>>>>>                   goto out;
>>>>>               }
>>>>>           }
>>>>> +    } else {
>>>>> +        struct device_node *np = rproc->dev.parent->of_node;
>>>>> +
>>>>> +        /*
>>>>> +         * If we don't have dedicated buffer, just attempt to
>>>>> +         * re-assign the reserved memory from our parent.
>>>>> +         * Failure is non-critical so don't check return value
>>>>> +         * either.
>>>>> +         */
>>>>> +        of_reserved_mem_device_init_by_idx(dev, np, 0);
>>>>>       }
>>>> I aven't tested your patchset yet, but reviewing you code,  I wonder
>>>> if you cannot declare your  memory pool
>>>> in your platform driver using  rproc_of_resm_mem_entry_init. 
>>
>> The patch actually provides a fallback option and even now this path is
>> entered only when there are no dedicated pools. This restores the code
>> to how the allocations were made prior to the fixed memory carveout
>> changes. If the remoteproc drivers themselves do not use any DMA/CMA
>> pools, then nothing changes and allocations continue to be made from the
>> global pools.
> 
> If there is no dedicated pool, no need to associate a memory pool here,
> The allocation by default should be done in the global pools if not pool
> is assocated to the vdev.

Yeah, that's why no error checking on the invocation. The function will
return an error value if there are no pools defined, which we shall
ignore and will be a no-op.

> Only a global pool assigned to a rproc is not treated as you mention.>
>>
>> Something
>>>> like:
>>>>     struct device_node *mem_node;
>>>>     struct reserved_mem *rmem;
>>>>
>>>>     mem_node = of_parse_phandle(dev->of_node, "memory-region", 0);
>>>>     rmem = of_reserved_mem_lookup(mem_node);
>>>>     mem = rproc_of_resm_mem_entry_init(dev, 0,
>>>>                                rmem->size,
>>>>                                rmem->base,
>>>>                                " vdev0buffer");
>>>>
>>>> A main advantage of this implementation would be that the index of the
>>>> memory region would not be hard coded to 0.
>>
>> The 0 is the default (equivalent to of_reserved_mem_device_init(), but
>> we can't use that function here since dev and np are different).
>>
>> While your suggestion does work for us, this does bring in the knowledge
>> of how many vdevs a remoteproc driver is supporting. It is fine for
>> remoteproc drivers that are designed exactly for a known number of vdevs
>> and/or fixed pools to use the above function, but every other remoteproc
>> driver would have to repeat similar code. Given that the number of vdevs
>> are currently defined through the resource table and can change from
>> firmware to firmware, I think this fallback option patch is the better
>> scalable solution.
> 
> Yes you right this supposes that the number of vdev is limited and known, so
> not enough scalable.
> 
> From MPOV what is restrictive here is the index forced to 0. 
> This implementation would impose to declare first the global memory for the vdevs 
> then other memory regions (e.g memory reserved for firmware code loading). 
> Need at minimum to be documented this restriction...

I see your point. I would think that if your rproc device has multiple
regions to begin with, then it is already expecting certain behavior
from certain pools, and will have to interpret them either based on name
or index.

> 
> A alternative would be to use resource table carveout to declare region, but 
> this would probably break compatibility with legacy remote firmware...
> 
> A second alternative could be to define a specific name for a rproc default memory pool.
> and then look for it.

OK, how about just storing a default index in rproc struct that the
individual platform drivers can override if the memory region is not at
index 0. Most drivers that just define a single pool need not do
anything special as this variable shall be initialized to 0 in
rproc_alloc(), and much simpler code compared to a name-based lookup.

Something like
  of_reserved_mem_device_init_by_idx(dev, np, rproc->def_vdevbuf_id);

regards
Suman


> 
> Regards,
> Arnaud
> 
>>
>> Let's see if others have any opinion on this.
>>
>> regards
>> Suman
>>
>>>
>>> It seems like that would work for us also, and thus this patch can be
>>> dropped. See the following patch. Suman, any comments on this? If this
>>> seems acceptable, I can send this as a proper patch to the list.
>>>
>>> ------
>>>
>>> From: Tero Kristo <t-kristo@ti.com>
>>> Date: Wed, 18 Mar 2020 11:22:58 +0200
>>> Subject: [PATCH] remoteproc/omap: Allocate vdev0buffer memory from
>>>  reserved memory pool
>>>
>>> Since 086d08725d34 ("remoteproc: create vdev subdevice with specific dma
>>> memory pool"), remoteprocs must allocate separate vdev memory buffer. As
>>> OMAP remoteproc does not do this yet, the memory gets allocated from
>>> default DMA pool, and this memory is not suitable for the use. To fix
>>> the issue, map the vdev0buffer to use the same device reserved memory
>>> pool as the rest of the remoteproc.
>>>
>>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>>> ---
>>>  drivers/remoteproc/omap_remoteproc.c | 16 ++++++++++++++++
>>>  1 file changed, 16 insertions(+)
>>>
>>> diff --git a/drivers/remoteproc/omap_remoteproc.c
>>> b/drivers/remoteproc/omap_remoteproc.c
>>> index 29d19a608af8..024330e31a9e 100644
>>> --- a/drivers/remoteproc/omap_remoteproc.c
>>> +++ b/drivers/remoteproc/omap_remoteproc.c
>>> @@ -1273,6 +1273,9 @@ static int omap_rproc_probe(struct platform_device
>>> *pdev)
>>>      const char *firmware;
>>>      int ret;
>>>      struct reset_control *reset;
>>> +    struct device_node *mem_node;
>>> +    struct reserved_mem *rmem;
>>> +    struct rproc_mem_entry *mem;
>>>
>>>      if (!np) {
>>>          dev_err(&pdev->dev, "only DT-based devices are supported\n");
>>> @@ -1335,6 +1338,19 @@ static int omap_rproc_probe(struct
>>> platform_device *pdev)
>>>          dev_warn(&pdev->dev, "device does not have specific CMA pool.\n");
>>>          dev_warn(&pdev->dev, "Typically this should be provided,\n");
>>>          dev_warn(&pdev->dev, "only omit if you know what you are
>>> doing.\n");
>>> +    } else {
>>> +        mem_node = of_parse_phandle(pdev->dev.of_node, "memory-region",
>>> +                        0);
>>> +        rmem = of_reserved_mem_lookup(mem_node);
>>> +        mem = rproc_of_resm_mem_entry_init(&pdev->dev, 0, rmem->size,
>>> +                           rmem->base, "vdev0buffer");
>>> +
>>> +        if (!mem) {
>>> +            ret = -ENOMEM;
>>> +            goto release_mem;
>>> +        }
>>> +
>>> +        rproc_add_carveout(rproc, mem);
>>>      }
>>>
>>>      platform_set_drvdata(pdev, rproc);
>>

Re: [PATCH 2/2] remoteproc: Fix and restore the parenting hierarchy for vdev

[Suman Anna]

Hi Arnaud,

On 3/18/20 11:38 AM, Arnaud POULIQUEN wrote:
> Hi Suman, Mathieu,
> 
> On 3/17/20 7:05 PM, Mathieu Poirier wrote:
>> Hi Suman,
>>
>> On Thu, Mar 05, 2020 at 04:41:08PM -0600, Suman Anna wrote:
>>> The commit 086d08725d34 ("remoteproc: create vdev subdevice with specific
>>> dma memory pool") has introduced a new vdev subdevice for each vdev
>>> declared in the firmware resource table and made it as the parent for the
>>> created virtio rpmsg devices instead of the previous remoteproc device.
>>> This changed the overall parenting hierarchy for the rpmsg devices, which
>>> were children of virtio devices, and does not allow the corresponding
>>> rpmsg drivers to retrieve the parent rproc device through the
>>> rproc_get_by_child() API.
>>>
>>> Fix this by restoring the remoteproc device as the parent. The new vdev
>>> subdevice can continue to inherit the DMA attributes from the remoteproc's
>>> parent device (actual platform device).
>>>
>>> Fixes: 086d08725d34 ("remoteproc: create vdev subdevice with specific dma memory pool")
>>> Signed-off-by: Suman Anna <s-anna@ti.com>
>>> ---
>>>  drivers/remoteproc/remoteproc_core.c | 2 +-
>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
>>> index 097f33e4f1f3..ba18f32bd0c4 100644
>>> --- a/drivers/remoteproc/remoteproc_core.c
>>> +++ b/drivers/remoteproc/remoteproc_core.c
>>> @@ -510,7 +510,7 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
>>>  
>>>  	/* Initialise vdev subdevice */
>>>  	snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index);
>>> -	rvdev->dev.parent = rproc->dev.parent;
>>> +	rvdev->dev.parent = &rproc->dev;
>>
>> I can see how it would not be possible to retrieve the parent rproc device since
>> rvdev->dev.parent was set to be platform device...
> 
> In rpmsg_virtio_bus.c [1] the vdev buffers are allocated in a memory region using a dma_alloc_coherent
> So the buffers are allocated in the platform driver memory region if declared, else in the default memory region. 
> 
> According to  086d08725d34 ("remoteproc: create vdev subdevice with specific dma memory pool"),
> A patch has been integrated in rpmsg framework:  d999b622fcfb3 ("rpmsg: virtio: allocate buffer from parent")
> 
> -	bufs_va = dma_alloc_coherent(vdev->dev.parent->parent,
> +	bufs_va = dma_alloc_coherent(vdev->dev.parent,
> 
> So in term of parent-child relationchip the Loic's patches seem coherent, and don't affect parenting hierarchy
> for the rpmsg bus.

So, there are two things w.r.t rpmsg device hierarchy - buffer
allocations and the overall hierarchy to allow a child rpmsg device to
be able to retrieve the corresponding rproc. This is done using
rproc_get_by_child() which walks up the dev parent hierarchy and
matching the parent device type to rproc_type.

Commit 086d08725d34 adds a new vdevbuffer device with parent as the
rproc platform device and makes this the parent of the virtio device, so
the buffer allocations were unchanged just with that commit, but the
rproc lookup will always fail. The later commit d999b622fcfb3 switches
the buffer allocation over to the vdevbuffer device, and with rproc
drivers that added dedicated vdevbuf pools allocates from those pools
(these were mostly coming from a specific rproc platform device memory
region index anyway). For those that did not define, this actually
became the global pool even if the rproc device was using a single
DMA/CMA pool (patch 1).

Please see my cover-letter for an example of the dev hierarchy.

> 
> So It seems to me that this patch breaks the relationship between the rpmsg bus
> and the rproc platform driver, at least concerning the buffer allocation.

I am not sure if you were interpreting this patch with or without
d999b622fcfb3 ("rpmsg: virtio: allocate buffer from parent"). Both of
the above commits are in 5.1, so I consider this patch to be fixing only
on 5.1+ kernels and it does use d999b622fcfb3. Buffer allocations after
this patch without d999b622fcfb3 would try to allocate from rproc device
which is a pseudo-device and doesn't have any pools defined with it, so
will allocate from the global pool.

> But on the other side this patch doesn't introduce regression for rpmsg bus on my platform... 
> 
> I probably missed something important because i can not figure out how this patch don't introduce regression.
> Can the rproc->dev inherits from the rproc platform device in term of memory regions?
> 
> [1]: https://elixir.bootlin.com/linux/latest/source/drivers/rpmsg/virtio_rpmsg_bus.c#L915
> [2]: https://lkml.org/lkml/2018/11/30/180
> 
>>
>> I wonder how the original change didn't blow up sysmon_probe() and potentially
>> other out-of-tree users of rproc_get_by_child().  It would be nice to have
>> someone from the QCOM team test your patch.
> 
> You are right the rproc platform device is now the grand parent of a rpmsg device, while before it was the parent.
> Anyway, does it makes sense to have this kind of dependency between rpmsg device and rproc device?
> The fix could be done in the rpmsg device that would be rproc dependent (if out-of-tree).

Not sure what you are proposing here, since you cannot retrieve a rproc
handle. We use this to perform address translations in rpmsg drivers
since all the addresses are with the rproc device.

> The alternative could be to declare the rpmsg device in device tree as child of the rproc platform device...

And that is completely orthogonal and doesn't solve the current scenario
where rpmsg devices are created through the virtio-rpmsg bus nameservice
announcement.

regards
Suman


> 
> Regards,
> Arnaud
> 
>>
>>>  	rvdev->dev.dma_pfn_offset = rproc->dev.parent->dma_pfn_offset;
>>>  	rvdev->dev.release = rproc_rvdev_release;
>>>  	dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name);
>>
>> Be mindful there might be fallouts from applying this patch since it does change
>> the location of the vdev under /sys/device/platform/ .
>>
>> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
>>
>>> -- 
>>> 2.23.0
>>>

Re: [PATCH 2/2] remoteproc: Fix and restore the parenting hierarchy for vdev

[Arnaud POULIQUEN]

hi Suman,

On 3/18/20 8:23 PM, Suman Anna wrote:
> Hi Arnaud,
> 
> On 3/18/20 11:38 AM, Arnaud POULIQUEN wrote:
>> Hi Suman, Mathieu,
>>
>> On 3/17/20 7:05 PM, Mathieu Poirier wrote:
>>> Hi Suman,
>>>
>>> On Thu, Mar 05, 2020 at 04:41:08PM -0600, Suman Anna wrote:
>>>> The commit 086d08725d34 ("remoteproc: create vdev subdevice with specific
>>>> dma memory pool") has introduced a new vdev subdevice for each vdev
>>>> declared in the firmware resource table and made it as the parent for the
>>>> created virtio rpmsg devices instead of the previous remoteproc device.
>>>> This changed the overall parenting hierarchy for the rpmsg devices, which
>>>> were children of virtio devices, and does not allow the corresponding
>>>> rpmsg drivers to retrieve the parent rproc device through the
>>>> rproc_get_by_child() API.
>>>>
>>>> Fix this by restoring the remoteproc device as the parent. The new vdev
>>>> subdevice can continue to inherit the DMA attributes from the remoteproc's
>>>> parent device (actual platform device).
>>>>
>>>> Fixes: 086d08725d34 ("remoteproc: create vdev subdevice with specific dma memory pool")
>>>> Signed-off-by: Suman Anna <s-anna@ti.com>
>>>> ---
>>>>  drivers/remoteproc/remoteproc_core.c | 2 +-
>>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
>>>> index 097f33e4f1f3..ba18f32bd0c4 100644
>>>> --- a/drivers/remoteproc/remoteproc_core.c
>>>> +++ b/drivers/remoteproc/remoteproc_core.c
>>>> @@ -510,7 +510,7 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
>>>>  
>>>>  	/* Initialise vdev subdevice */
>>>>  	snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index);
>>>> -	rvdev->dev.parent = rproc->dev.parent;
>>>> +	rvdev->dev.parent = &rproc->dev;
>>>
>>> I can see how it would not be possible to retrieve the parent rproc device since
>>> rvdev->dev.parent was set to be platform device...
>>
>> In rpmsg_virtio_bus.c [1] the vdev buffers are allocated in a memory region using a dma_alloc_coherent
>> So the buffers are allocated in the platform driver memory region if declared, else in the default memory region. 
>>
>> According to  086d08725d34 ("remoteproc: create vdev subdevice with specific dma memory pool"),
>> A patch has been integrated in rpmsg framework:  d999b622fcfb3 ("rpmsg: virtio: allocate buffer from parent")
>>
>> -	bufs_va = dma_alloc_coherent(vdev->dev.parent->parent,
>> +	bufs_va = dma_alloc_coherent(vdev->dev.parent,
>>
>> So in term of parent-child relationchip the Loic's patches seem coherent, and don't affect parenting hierarchy
>> for the rpmsg bus.
> 
> So, there are two things w.r.t rpmsg device hierarchy - buffer
> allocations and the overall hierarchy to allow a child rpmsg device to
> be able to retrieve the corresponding rproc. This is done using
> rproc_get_by_child() which walks up the dev parent hierarchy and
> matching the parent device type to rproc_type.
> 
> Commit 086d08725d34 adds a new vdevbuffer device with parent as the
> rproc platform device and makes this the parent of the virtio device, so
> the buffer allocations were unchanged just with that commit, but the
> rproc lookup will always fail. The later commit d999b622fcfb3 switches
> the buffer allocation over to the vdevbuffer device, and with rproc
> drivers that added dedicated vdevbuf pools allocates from those pools
> (these were mostly coming from a specific rproc platform device memory
> region index anyway). For those that did not define, this actually
> became the global pool even if the rproc device was using a single
> DMA/CMA pool (patch 1).
> 
> Please see my cover-letter for an example of the dev hierarchy.
You are right allocation is not affected by your patch.
It is still done in the memory pool attached to rvdev.
This is the main point i missed. I reviewed the whole parent hierarchy to better understand why your patch
does not affect the memory allocation.
Now it clear to me, sorry for my misunderstanding of your point.

Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>

> 
>>
>> So It seems to me that this patch breaks the relationship between the rpmsg bus
>> and the rproc platform driver, at least concerning the buffer allocation.
> 
> I am not sure if you were interpreting this patch with or without
> d999b622fcfb3 ("rpmsg: virtio: allocate buffer from parent"). Both of
> the above commits are in 5.1, so I consider this patch to be fixing only
> on 5.1+ kernels and it does use d999b622fcfb3. Buffer allocations after
> this patch without d999b622fcfb3 would try to allocate from rproc device
> which is a pseudo-device and doesn't have any pools defined with it, so
> will allocate from the global pool.
> 
>> But on the other side this patch doesn't introduce regression for rpmsg bus on my platform... 
>>
>> I probably missed something important because i can not figure out how this patch don't introduce regression.
>> Can the rproc->dev inherits from the rproc platform device in term of memory regions?
>>
>> [1]: https://elixir.bootlin.com/linux/latest/source/drivers/rpmsg/virtio_rpmsg_bus.c#L915
>> [2]: https://lkml.org/lkml/2018/11/30/180
>>
>>>
>>> I wonder how the original change didn't blow up sysmon_probe() and potentially
>>> other out-of-tree users of rproc_get_by_child().  It would be nice to have
>>> someone from the QCOM team test your patch.
>>
>> You are right the rproc platform device is now the grand parent of a rpmsg device, while before it was the parent.
>> Anyway, does it makes sense to have this kind of dependency between rpmsg device and rproc device?
>> The fix could be done in the rpmsg device that would be rproc dependent (if out-of-tree).
> 
> Not sure what you are proposing here, since you cannot retrieve a rproc
> handle. We use this to perform address translations in rpmsg drivers
> since all the addresses are with the rproc device.
>
>> The alternative could be to declare the rpmsg device in device tree as child of the rproc platform device...
> 
> And that is completely orthogonal and doesn't solve the current scenario
> where rpmsg devices are created through the virtio-rpmsg bus nameservice
> announcement.
Yes it another discussion. The only thing i would like to highlight here (for future discussion) is the relation chip
you create between rpmsg and remoteproc using rproc_get_by_child. 
Would be nice to have an abstraction layer for memory allocation and translation for generic RPMsg devices decorrelated
from remoteproc.
No more the topic here...

Thanks,
Arnaud

> 
> regards
> Suman
> 
> 
>>
>> Regards,
>> Arnaud
>>
>>>
>>>>  	rvdev->dev.dma_pfn_offset = rproc->dev.parent->dma_pfn_offset;
>>>>  	rvdev->dev.release = rproc_rvdev_release;
>>>>  	dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name);
>>>
>>> Be mindful there might be fallouts from applying this patch since it does change
>>> the location of the vdev under /sys/device/platform/ .
>>>
>>> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
>>>
>>>> -- 
>>>> 2.23.0
>>>>
>