linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: Henning Schild <henning.schild@siemens.com>
Cc: linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org,
	platform-driver-x86@vger.kernel.org,
	linux-watchdog@vger.kernel.org,
	Srikanth Krishnakar <skrishnakar@gmail.com>,
	Jan Kiszka <jan.kiszka@siemens.com>,
	Gerd Haeussler <gerd.haeussler.ext@siemens.com>,
	Guenter Roeck <linux@roeck-us.net>,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	Mark Gross <mgross@linux.intel.com>, Pavel Machek <pavel@ucw.cz>,
	Andy Shevchenko <andy.shevchenko@gmail.com>
Subject: Re: [PATCH] platform/x86: pmc_atom: use callback for all dmi quirk entries
Date: Tue, 16 Mar 2021 10:43:15 +0100	[thread overview]
Message-ID: <8c416d06-4190-2d1b-3969-209c4291d73b@redhat.com> (raw)
In-Reply-To: <20210316064743.0b5a47cf@md1za8fc.ad001.siemens.net>

Hi Henning,

On 3/16/21 6:47 AM, Henning Schild wrote:
> Hoi Hans,
> 
> on a slighly different but also related topic. Did you ever come across
> SMSC SCH5347? Seems to be pretty similar to 56xx, only with spec non
> public ... and probably less often in use
> Maybe you happen to have code, or know the differences. We already have
> it working with a modified copy of sch56xx but that is still rough and
> i thought i ask before we potentially duplicate work.

The history of FSC (Fujitsu-Siemens Computers) sensor support goes something
like this:

1. The university which I worked at had picked a FSC machine for the
replacement of all workstations, the FSCXXX sensor chip it had was i2c based,
so I could relatively easy reverse-engineer it and wrote a driver.

2. Around the time I stopped working for the university and started working
for Red Hat (2008) FSC contacted me and asked me if I wanted to help them
with officially supporting the FSC and later the SCH devices. They provided
test hardware and documentation at this time.

3. This continued for a while when FSC became just "Fujitsu" and things
moved from the FSC i2c based chips to the super-io based SCH chips. After
a while Fujitsu stopped contacting me about new chips and I stopped working
on this.

So ATM I'm not working no SCH56xx support and I've not worked on that for
quite some time now. So it is good to hear that you will be contributing
SCH5347 support to the kernel.

Regards,

Hans






> Am Mon, 15 Mar 2021 19:01:13 +0100
> schrieb Hans de Goede <hdegoede@redhat.com>:
> 
>> Hi,
>>
>> On 3/15/21 6:00 PM, Henning Schild wrote:
>>> Am Mon, 15 Mar 2021 17:31:49 +0100
>>> schrieb Hans de Goede <hdegoede@redhat.com>:
>>>   
>>>> Hi,
>>>>
>>>> On 3/15/21 3:58 PM, Henning Schild wrote:  
>>>>> Introduce a global variable to remember the matching entry for
>>>>> later printing. Also having a callback allows to stop matching
>>>>> after the first hit.
>>>>>
>>>>> Signed-off-by: Henning Schild <henning.schild@siemens.com>
>>>>> ---
>>>>>  drivers/platform/x86/pmc_atom.c | 26 ++++++++++++++++++++------
>>>>>  1 file changed, 20 insertions(+), 6 deletions(-)
>>>>>
>>>>> diff --git a/drivers/platform/x86/pmc_atom.c
>>>>> b/drivers/platform/x86/pmc_atom.c index 38542d547f29..d0f74856cd8b
>>>>> 100644 --- a/drivers/platform/x86/pmc_atom.c
>>>>> +++ b/drivers/platform/x86/pmc_atom.c
>>>>> @@ -364,8 +364,16 @@ static void pmc_dbgfs_register(struct pmc_dev
>>>>> *pmc) #endif /* CONFIG_DEBUG_FS */
>>>>>  
>>>>>  static bool pmc_clk_is_critical = true;
>>>>> +static const struct dmi_system_id *dmi_critical;
>>>>>  
>>>>> -static int siemens_clk_is_critical(const struct dmi_system_id *d)
>>>>> +static int dmi_callback(const struct dmi_system_id *d)
>>>>> +{
>>>>> +	dmi_critical = d;    
>>>>
>>>> Don't introduce a global variable for this please. Instead just
>>>> directly print the ident of the matching dmi_system_id here.  
>>>
>>> Sorry, missed that part. Result looks nice and clean, thanks. I
>>> think i will squash it into 4/4 in v3 and not follow up here for
>>> now.  
>>
>> Ack, that sounds good to me.
>>
>> Regards,
>>
>> Hans
>>
>>
>>>>> +
>>>>> +	return 1;
>>>>> +}
>>>>> +
>>>>> +static int dmi_callback_siemens(const struct dmi_system_id *d)
>>>>>  {
>>>>>  	u32 st_id;
>>>>>  
>>>>> @@ -373,7 +381,7 @@ static int siemens_clk_is_critical(const
>>>>> struct dmi_system_id *d) goto out;
>>>>>  
>>>>>  	if (st_id == SIMATIC_IPC_IPC227E || st_id ==
>>>>> SIMATIC_IPC_IPC277E)
>>>>> -		return 1;
>>>>> +		return dmi_callback(d);
>>>>>  
>>>>>  out:
>>>>>  	pmc_clk_is_critical = false;
>>>>> @@ -388,6 +396,7 @@ static const struct dmi_system_id
>>>>> critclk_systems[] = { {
>>>>>  		/* pmc_plt_clk0 is used for an external HSIC USB
>>>>> HUB */ .ident = "MPL CEC1x",
>>>>> +		.callback = dmi_callback,
>>>>>  		.matches = {
>>>>>  			DMI_MATCH(DMI_SYS_VENDOR, "MPL AG"),
>>>>>  			DMI_MATCH(DMI_PRODUCT_NAME, "CEC10
>>>>> Family"), @@ -396,6 +405,7 @@ static const struct dmi_system_id
>>>>> critclk_systems[] = { {
>>>>>  		/* pmc_plt_clk0 - 3 are used for the 4 ethernet
>>>>> controllers */ .ident = "Lex 3I380D",
>>>>> +		.callback = dmi_callback,
>>>>>  		.matches = {
>>>>>  			DMI_MATCH(DMI_SYS_VENDOR, "Lex
>>>>> BayTrail"), DMI_MATCH(DMI_PRODUCT_NAME, "3I380D"),
>>>>> @@ -404,6 +414,7 @@ static const struct dmi_system_id
>>>>> critclk_systems[] = { {
>>>>>  		/* pmc_plt_clk* - are used for ethernet
>>>>> controllers */ .ident = "Lex 2I385SW",
>>>>> +		.callback = dmi_callback,
>>>>>  		.matches = {
>>>>>  			DMI_MATCH(DMI_SYS_VENDOR, "Lex
>>>>> BayTrail"), DMI_MATCH(DMI_PRODUCT_NAME, "2I385SW"),
>>>>> @@ -412,6 +423,7 @@ static const struct dmi_system_id
>>>>> critclk_systems[] = { {
>>>>>  		/* pmc_plt_clk* - are used for ethernet
>>>>> controllers */ .ident = "Beckhoff CB3163",
>>>>> +		.callback = dmi_callback,
>>>>>  		.matches = {
>>>>>  			DMI_MATCH(DMI_SYS_VENDOR, "Beckhoff
>>>>> Automation"), DMI_MATCH(DMI_BOARD_NAME, "CB3163"),
>>>>> @@ -420,6 +432,7 @@ static const struct dmi_system_id
>>>>> critclk_systems[] = { {
>>>>>  		/* pmc_plt_clk* - are used for ethernet
>>>>> controllers */ .ident = "Beckhoff CB4063",
>>>>> +		.callback = dmi_callback,
>>>>>  		.matches = {
>>>>>  			DMI_MATCH(DMI_SYS_VENDOR, "Beckhoff
>>>>> Automation"), DMI_MATCH(DMI_BOARD_NAME, "CB4063"),
>>>>> @@ -428,6 +441,7 @@ static const struct dmi_system_id
>>>>> critclk_systems[] = { {
>>>>>  		/* pmc_plt_clk* - are used for ethernet
>>>>> controllers */ .ident = "Beckhoff CB6263",
>>>>> +		.callback = dmi_callback,
>>>>>  		.matches = {
>>>>>  			DMI_MATCH(DMI_SYS_VENDOR, "Beckhoff
>>>>> Automation"), DMI_MATCH(DMI_BOARD_NAME, "CB6263"),
>>>>> @@ -436,13 +450,14 @@ static const struct dmi_system_id
>>>>> critclk_systems[] = { {
>>>>>  		/* pmc_plt_clk* - are used for ethernet
>>>>> controllers */ .ident = "Beckhoff CB6363",
>>>>> +		.callback = dmi_callback,
>>>>>  		.matches = {
>>>>>  			DMI_MATCH(DMI_SYS_VENDOR, "Beckhoff
>>>>> Automation"), DMI_MATCH(DMI_BOARD_NAME, "CB6363"),
>>>>>  		},
>>>>>  	},
>>>>>  	{
>>>>> -		.callback = siemens_clk_is_critical,
>>>>> +		.callback = dmi_callback_siemens,
>>>>>  		.ident = "SIEMENS AG",
>>>>>  		.matches = {
>>>>>  			DMI_MATCH(DMI_SYS_VENDOR, "SIEMENS AG"),
>>>>> @@ -457,7 +472,6 @@ static int pmc_setup_clks(struct pci_dev
>>>>> *pdev, void __iomem *pmc_regmap, {
>>>>>  	struct platform_device *clkdev;
>>>>>  	struct pmc_clk_data *clk_data;
>>>>> -	const struct dmi_system_id *d;
>>>>>  
>>>>>  	clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
>>>>>  	if (!clk_data)
>>>>> @@ -468,8 +482,8 @@ static int pmc_setup_clks(struct pci_dev
>>>>> *pdev, void __iomem *pmc_regmap, if
>>>>> (dmi_check_system(critclk_systems)) { clk_data->critical =
>>>>> pmc_clk_is_critical; if (clk_data->critical) {
>>>>> -			d = dmi_first_match(critclk_systems);
>>>>> -			pr_info("%s critclks quirk enabled\n",
>>>>> d->ident);
>>>>> +			pr_info("%s critclks quirk enabled\n",
>>>>> +				dmi_critical->ident);
>>>>>  		}
>>>>>  	}
>>>>>  
>>>>>     
>>>>  
>>>   
>>
> 


  reply	other threads:[~2021-03-16  9:44 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-15  9:57 [PATCH v2 0/4] add device drivers for Siemens Industrial PCs Henning Schild
2021-03-15  9:57 ` [PATCH v2 1/4] platform/x86: simatic-ipc: add main driver for Siemens devices Henning Schild
2021-03-15 10:31   ` Andy Shevchenko
2021-03-15 16:30     ` Henning Schild
2021-03-17 19:13     ` Henning Schild
2021-03-17 20:03       ` Hans de Goede
2021-03-18 11:30         ` Enrico Weigelt, metux IT consult
2021-03-18 11:45           ` Hans de Goede
2021-03-26  9:55             ` Henning Schild
2021-03-26 12:21               ` Hans de Goede
2021-03-15  9:57 ` [PATCH v2 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs Henning Schild
2021-03-15 10:48   ` Andy Shevchenko
2021-03-15 11:19     ` Pavel Machek
2021-03-15 11:26       ` Andy Shevchenko
2021-03-15 12:40       ` Henning Schild
2021-03-18 11:38       ` Enrico Weigelt, metux IT consult
2021-03-27  9:46         ` Henning Schild
2021-04-01 16:20           ` Enrico Weigelt, metux IT consult
2021-03-27  9:56       ` Henning Schild
2021-03-18 10:27     ` Enrico Weigelt, metux IT consult
2021-03-18 12:40       ` Alexander Dahl
2021-03-23 17:45         ` Henning Schild
2021-03-26 16:33     ` Henning Schild
2021-03-18 10:25   ` Enrico Weigelt, metux IT consult
2021-03-27 11:16     ` Henning Schild
2021-03-27 11:41       ` Henning Schild
2021-03-15  9:57 ` [PATCH v2 3/4] watchdog: simatic-ipc-wdt: add new driver for Siemens Industrial PCs Henning Schild
2021-03-15 15:10   ` Guenter Roeck
2021-03-29 16:28     ` Henning Schild
2021-03-15  9:57 ` [PATCH v2 4/4] platform/x86: pmc_atom: improve critclk_systems matching for Siemens PCs Henning Schild
2021-03-15 10:14   ` Henning Schild
2021-03-15 10:19     ` Hans de Goede
2021-03-15 12:09       ` Henning Schild
2021-03-15 14:58       ` [PATCH] platform/x86: pmc_atom: use callback for all dmi quirk entries Henning Schild
2021-03-15 16:31         ` Hans de Goede
2021-03-15 17:00           ` Henning Schild
2021-03-15 18:01             ` Hans de Goede
2021-03-16  5:47               ` Henning Schild
2021-03-16  9:43                 ` Hans de Goede [this message]
2021-03-15 13:25   ` [PATCH v2 4/4] platform/x86: pmc_atom: improve critclk_systems matching for Siemens PCs kernel test robot
2021-03-15 10:55 ` [PATCH v2 0/4] add device drivers for Siemens Industrial PCs Andy Shevchenko
2021-03-15 16:08   ` Henning Schild
2021-08-02  9:21   ` Henning Schild

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8c416d06-4190-2d1b-3969-209c4291d73b@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=gerd.haeussler.ext@siemens.com \
    --cc=henning.schild@siemens.com \
    --cc=jan.kiszka@siemens.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mgross@linux.intel.com \
    --cc=pavel@ucw.cz \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=skrishnakar@gmail.com \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).