Re: [PATCH v3] mtd: spinand: Fix ECC status and OOB layout for Toshiba TC58CVG2S0H

From: Schrempf Frieder <frieder.schrempf@kontron.de>
To: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"peron.clem@gmail.com" <peron.clem@gmail.com>,
	Boris Brezillon <boris.brezillon@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	"David Woodhouse" <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	"linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>
Subject: Re: [PATCH v3] mtd: spinand: Fix ECC status and OOB layout for Toshiba TC58CVG2S0H
Date: Fri, 7 Dec 2018 09:31:47 +0000	[thread overview]
Message-ID: <8e70737f-0780-d607-eadc-f6435288f660@kontron.de> (raw)
In-Reply-To: <20181207090041.6b8d9731@xps13>

Hi Miquèl,

On 07.12.18 09:00, Miquel Raynal wrote:
> Hi Schrempf, Clément,
> 
> Schrempf Frieder <frieder.schrempf@kontron.de> wrote on Mon, 3 Dec 2018
> 08:01:38 +0000:
> 
>> From: Frieder Schrempf <frieder.schrempf@kontron.de>
>>
>> When reading the status of the on-chip ECC, the Toshiba chip returns
>> two different states for reporting corrected bitflips. We should check
>> for both of them.
>>
>> Also return the free OOB bytes as one contiguous area, instead of
>> multiple sections.
>>
>> Suggested-by: Clément Péron <peron.clem@gmail.com>
>> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
>> Acked-by: Clément Péron <peron.clem@gmail.com>
>> ---
>> Changes for v3:
>> ===============
>> * Add Acked-by
>> * Add comment for BBM in OOB layout
>>
>> Changes for v2:
>> ===============
>> * Remove the changes to the ECC bytes in the OOB layout
>> ---
>>   drivers/mtd/nand/spi/toshiba.c | 11 ++++++-----
>>   1 file changed, 6 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/mtd/nand/spi/toshiba.c b/drivers/mtd/nand/spi/toshiba.c
>> index 294bcf6..0812655 100644
>> --- a/drivers/mtd/nand/spi/toshiba.c
>> +++ b/drivers/mtd/nand/spi/toshiba.c
>> @@ -11,6 +11,7 @@
>>   #include <linux/mtd/spinand.h>
>>   
>>   #define SPINAND_MFR_TOSHIBA		0x98
>> +#define TOSH_STATUS_ECC_HAS_BITFLIPS_T	(3 << 4)
>>   
>>   static SPINAND_OP_VARIANTS(read_cache_variants,
>>   		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
>> @@ -33,19 +34,18 @@ static int tc58cvg2s0h_ooblayout_ecc(struct mtd_info *mtd, int section,
>>   	region->offset = 128 + 16 * section;
>>   	region->length = 16;
>>   
>> -
>>   	return 0;
>>   }
>>   
>>   static int tc58cvg2s0h_ooblayout_free(struct mtd_info *mtd, int section,
>>   				      struct mtd_oob_region *region)
>>   {
>> -	if (section > 7)
>> +	if (section > 0)
>>   		return -ERANGE;
>>   
>> -	region->offset = 2 + 16 * section;
>> -	region->length = 14;
>> -
>> +	/* 2 bytes reserved for BBM */
>> +	region->offset = 2;
>> +	region->length = 126;
>>   
>>   	return 0;
>>   }
>> @@ -70,6 +70,7 @@ static int tc58cvg2s0h_ecc_get_status(struct spinand_device *spinand,
>>   		return -EBADMSG;
>>   
>>   	case STATUS_ECC_HAS_BITFLIPS:
>> +	case TOSH_STATUS_ECC_HAS_BITFLIPS_T:
>>   		/*
>>   		 * Let's try to retrieve the real maximum number of bitflips
>>   		 * in order to avoid forcing the wear-leveling layer to move
> 
> If you don't mind, I would like to squash this with the original patch.
> What about also adding Clement's Acked-by to it?

Sure, you can squash this with the original patch. And I guess adding 
Clément's Acked-by would be appropriate, too.

Thanks,
Frieder