[PATCH 5.4 00/84] 5.4.126-rc1 review

[PATCH 5.4 00/84] 5.4.126-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.126 release.
There are 84 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 16 Jun 2021 10:26:30 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.126-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.126-rc1

Liangyan <liangyan.peng@linux.alibaba.com>
    tracing: Correct the length check which causes memory corruption

Steven Rostedt (VMware) <rostedt@goodmis.org>
    ftrace: Do not blindly read the ip address in ftrace_bug()

Ming Lei <ming.lei@redhat.com>
    scsi: core: Only put parent device if host state differs from SHOST_CREATED

Ming Lei <ming.lei@redhat.com>
    scsi: core: Put .shost_dev in failure path if host state changes to RUNNING

Ming Lei <ming.lei@redhat.com>
    scsi: core: Fix failure handling of scsi_add_host_with_dma()

Ming Lei <ming.lei@redhat.com>
    scsi: core: Fix error handling of scsi_host_alloc()

Dai Ngo <dai.ngo@oracle.com>
    NFSv4: nfs4_proc_set_acl needs to restore NFS_CAP_UIDGID_NOMAP on error.

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFSv4: Fix second deadlock in nfs4_evict_inode()

Anna Schumaker <Anna.Schumaker@Netapp.com>
    NFS: Fix use-after-free in nfs4_init_client()

Paolo Bonzini <pbonzini@redhat.com>
    kvm: fix previous commit for 32-bit builds

Leo Yan <leo.yan@linaro.org>
    perf session: Correct buffer copying when peeking events

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFSv4: Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode()

Dan Carpenter <dan.carpenter@oracle.com>
    NFS: Fix a potential NULL dereference in nfs_get_client()

Alaa Hleihel <alaa@nvidia.com>
    IB/mlx5: Fix initializing CQ fragments buffer

Sean Christopherson <seanjc@google.com>
    KVM: x86: Ensure liveliness of nested VM-Enter fail tracepoint message

Vincent Guittot <vincent.guittot@linaro.org>
    sched/fair: Make sure to update tg contrib for blocked load

Marco Elver <elver@google.com>
    perf: Fix data race between pin_count increment/decrement

Nathan Chancellor <nathan@kernel.org>
    vmlinux.lds.h: Avoid orphan section with !SMP

Shay Drory <shayd@nvidia.com>
    RDMA/mlx4: Do not map the core_clock page to user space unless enabled

Kamal Heib <kamalheib1@gmail.com>
    RDMA/ipoib: Fix warning caused by destroying non-initial netns

Bjorn Andersson <bjorn.andersson@linaro.org>
    usb: typec: mux: Fix copy-paste mistake in typec_mux_match

Dmitry Osipenko <digetx@gmail.com>
    regulator: max77620: Use device_set_of_node_from_dev()

Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
    regulator: core: resolve supply for boot-on/always-on regulators

Maciej Żenczykowski <maze@google.com>
    usb: fix various gadget panics on 10gbps cabling

Maciej Żenczykowski <maze@google.com>
    usb: fix various gadgets null ptr deref on 10gbps cabling.

Linyu Yuan <linyyuan@codeaurora.com>
    usb: gadget: eem: fix wrong eem header operation

Stefan Agner <stefan@agner.ch>
    USB: serial: cp210x: fix alternate function for CP2102N QFN20

Johan Hovold <johan@kernel.org>
    USB: serial: quatech2: fix control-request directions

Alexandre GRIVEAUX <agriveaux@deutnet.info>
    USB: serial: omninet: add device id for Zyxel Omni 56K Plus

George McCollister <george.mccollister@gmail.com>
    USB: serial: ftdi_sio: add NovaTech OrionMX product ID

Wesley Cheng <wcheng@codeaurora.org>
    usb: gadget: f_fs: Ensure io_completion_wq is idle during unbind

Mayank Rana <mrana@codeaurora.org>
    usb: typec: ucsi: Clear PPM capability data in ucsi_init() error path

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    usb: typec: wcove: Use LE to CPU conversion when accessing msg->header

Thomas Petazzoni <thomas.petazzoni@bootlin.com>
    usb: musb: fix MUSB_QUIRK_B_DISCONNECT_99 handling

Marian-Cristian Rotariu <marian.c.rotariu@gmail.com>
    usb: dwc3: ep0: fix NULL pointer exception

Jack Pham <jackp@codeaurora.org>
    usb: dwc3: debugfs: Add and remove endpoint dirs dynamically

Kyle Tso <kyletso@google.com>
    usb: pd: Set PD_T_SINK_WAIT_CAP to 310ms

Maciej Żenczykowski <maze@google.com>
    usb: f_ncm: only first packet of aggregate needs to start timer

Maciej Żenczykowski <maze@google.com>
    USB: f_ncm: ncm_bitrate (speed) is unsigned

Alexander Kuznetsov <wwfq@yandex-team.ru>
    cgroup1: don't allow '\n' in renaming

Nikolay Borisov <nborisov@suse.com>
    btrfs: promote debugging asserts to full-fledged checks in validate_super

Ritesh Harjani <riteshh@linux.ibm.com>
    btrfs: return value from btrfs_mark_extent_written() in case of error

Wenli Looi <wlooi@ucalgary.ca>
    staging: rtl8723bs: Fix uninitialized variables

Paolo Bonzini <pbonzini@redhat.com>
    kvm: avoid speculation-based attacks from out-of-range memslot accesses

Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
    drm: Lock pointer access in drm_master_release()

Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
    drm: Fix use-after-free read in drm_getunique()

Lukas Wunner <lukas@wunner.de>
    spi: bcm2835: Fix out-of-bounds access with more than 4 slaves

Arvind Sankar <nivedita@alum.mit.edu>
    x86/boot: Add .text.* to setup.ld

Chris Packham <chris.packham@alliedtelesis.co.nz>
    i2c: mpc: implement erratum A-004447 workaround

Chris Packham <chris.packham@alliedtelesis.co.nz>
    i2c: mpc: Make use of i2c_recover_bus()

Lukas Wunner <lukas@wunner.de>
    spi: Cleanup on failure of initial setup

Saravana Kannan <saravanak@google.com>
    spi: Don't have controller clean up spi device before driver unbind

Chris Packham <chris.packham@alliedtelesis.co.nz>
    powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers

Chris Packham <chris.packham@alliedtelesis.co.nz>
    powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers

Sagi Grimberg <sagi@grimberg.me>
    nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME

Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
    bnx2x: Fix missing error code in bnx2x_iov_init_one()

John Keeping <john@metanate.com>
    dm verity: fix require_signatures module_param permissions

Tiezhu Yang <yangtiezhu@loongson.cn>
    MIPS: Fix kernel hang under FUNCTION_GRAPH_TRACER and PREEMPT_TRACER

Hannes Reinecke <hare@suse.de>
    nvme-fabrics: decode host pathing error for connect

George McCollister <george.mccollister@gmail.com>
    net: dsa: microchip: enable phy errata workaround on 9567

Saubhik Mukherjee <saubhik.mukherjee@gmail.com>
    net: appletalk: cops: Fix data race in cops_probe1

Zong Li <zong.li@sifive.com>
    net: macb: ensure the device is available before accessing GEMGXL control registers

Dmitry Bogdanov <d.bogdanov@yadro.com>
    scsi: target: qla2xxx: Wait for stop_phase1 at WWN removal

Yang Yingliang <yangyingliang@huawei.com>
    scsi: hisi_sas: Drop free_irq() of devm_request_irq() allocated irq

Matt Wang <wwentao@vmware.com>
    scsi: vmw_pvscsi: Set correct residual data length

Javed Hasan <jhasan@marvell.com>
    scsi: bnx2fc: Return failure if io_req is already in ABTS processing

Rao Shoaib <rao.shoaib@oracle.com>
    RDS tcp loopback connection can hang

Zheyu Ma <zheyuma97@gmail.com>
    net/qla3xxx: fix schedule while atomic in ql_sem_spinlock

Sergey Senozhatsky <senozhatsky@chromium.org>
    wq: handle VM suspension in stall detection

Shakeel Butt <shakeelb@google.com>
    cgroup: disable controllers at parse time

Dan Carpenter <dan.carpenter@oracle.com>
    net: mdiobus: get rid of a BUG_ON()

Johannes Berg <johannes.berg@intel.com>
    netlink: disable IRQs for netlink_lock_table()

Johannes Berg <johannes.berg@intel.com>
    bonding: init notify_work earlier to avoid uninitialized use

Zheyu Ma <zheyuma97@gmail.com>
    isdn: mISDN: netjet: Fix crash in nj_probe:

Chunyan Zhang <chunyan.zhang@unisoc.com>
    spi: sprd: Add missing MODULE_DEVICE_TABLE

Zou Wei <zou_wei@huawei.com>
    ASoC: sti-sas: add missing MODULE_DEVICE_TABLE

Eric Farman <farman@linux.ibm.com>
    vfio-ccw: Serialize FSM IDLE state with I/O completion

Hans de Goede <hdegoede@redhat.com>
    ASoC: Intel: bytcr_rt5640: Add quirk for the Lenovo Miix 3-830 tablet

Hans de Goede <hdegoede@redhat.com>
    ASoC: Intel: bytcr_rt5640: Add quirk for the Glavey TM800A550L tablet

Dinghao Liu <dinghao.liu@zju.edu.cn>
    usb: cdns3: Fix runtime PM imbalance on error

Jeimon <jjjinmeng.zhou@gmail.com>
    net/nfc/rawsock.c: fix a permission check bug

Saravana Kannan <saravanak@google.com>
    spi: Fix spi device unregister flow

Marco Felsch <m.felsch@pengutronix.de>
    ASoC: max98088: fix ni clock divider calculation

Kees Cook <keescook@chromium.org>
    proc: Track /proc/$pid/attr/ opener mm_struct


-------------

Diffstat:

 Makefile                                          |  4 +-
 arch/mips/lib/mips-atomic.c                       | 12 +--
 arch/powerpc/boot/dts/fsl/p1010si-post.dtsi       |  8 ++
 arch/powerpc/boot/dts/fsl/p2041si-post.dtsi       | 16 ++++
 arch/x86/boot/setup.ld                            |  2 +-
 arch/x86/kvm/trace.h                              |  6 +-
 drivers/gpu/drm/drm_auth.c                        |  3 +-
 drivers/gpu/drm/drm_ioctl.c                       |  9 ++-
 drivers/i2c/busses/i2c-mpc.c                      | 95 ++++++++++++++++++++++-
 drivers/infiniband/hw/mlx4/main.c                 |  5 +-
 drivers/infiniband/hw/mlx5/cq.c                   |  9 +--
 drivers/infiniband/ulp/ipoib/ipoib_netlink.c      |  1 +
 drivers/isdn/hardware/mISDN/netjet.c              |  1 -
 drivers/md/dm-verity-verify-sig.c                 |  2 +-
 drivers/net/appletalk/cops.c                      |  4 +-
 drivers/net/bonding/bond_main.c                   |  2 +-
 drivers/net/dsa/microchip/ksz9477.c               |  1 +
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c |  4 +-
 drivers/net/ethernet/cadence/macb_main.c          |  3 +
 drivers/net/ethernet/mellanox/mlx4/fw.c           |  3 +
 drivers/net/ethernet/mellanox/mlx4/fw.h           |  1 +
 drivers/net/ethernet/mellanox/mlx4/main.c         |  6 ++
 drivers/net/ethernet/qlogic/qla3xxx.c             |  2 +-
 drivers/net/phy/mdio_bus.c                        |  3 +-
 drivers/nvme/host/Kconfig                         |  3 +-
 drivers/nvme/host/fabrics.c                       |  5 ++
 drivers/regulator/core.c                          |  6 ++
 drivers/regulator/max77620-regulator.c            |  7 ++
 drivers/s390/cio/vfio_ccw_drv.c                   | 12 ++-
 drivers/scsi/bnx2fc/bnx2fc_io.c                   |  1 +
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c            |  8 +-
 drivers/scsi/hosts.c                              | 47 ++++++-----
 drivers/scsi/qla2xxx/qla_target.c                 |  2 +
 drivers/scsi/vmw_pvscsi.c                         |  8 +-
 drivers/spi/spi-bcm2835.c                         | 10 ++-
 drivers/spi/spi-bitbang.c                         | 18 ++++-
 drivers/spi/spi-fsl-spi.c                         |  4 +
 drivers/spi/spi-omap-uwire.c                      |  9 ++-
 drivers/spi/spi-omap2-mcspi.c                     | 39 ++++++----
 drivers/spi/spi-pxa2xx.c                          |  9 ++-
 drivers/spi/spi-sprd.c                            |  1 +
 drivers/spi/spi.c                                 | 20 +++--
 drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c |  2 +-
 drivers/usb/cdns3/gadget.c                        |  4 +-
 drivers/usb/dwc3/debug.h                          |  3 +
 drivers/usb/dwc3/debugfs.c                        | 21 +----
 drivers/usb/dwc3/ep0.c                            |  3 +
 drivers/usb/dwc3/gadget.c                         |  3 +
 drivers/usb/gadget/config.c                       |  8 ++
 drivers/usb/gadget/function/f_ecm.c               |  2 +-
 drivers/usb/gadget/function/f_eem.c               |  6 +-
 drivers/usb/gadget/function/f_fs.c                |  3 +
 drivers/usb/gadget/function/f_hid.c               |  3 +-
 drivers/usb/gadget/function/f_loopback.c          |  2 +-
 drivers/usb/gadget/function/f_ncm.c               | 10 +--
 drivers/usb/gadget/function/f_printer.c           |  3 +-
 drivers/usb/gadget/function/f_rndis.c             |  2 +-
 drivers/usb/gadget/function/f_serial.c            |  2 +-
 drivers/usb/gadget/function/f_sourcesink.c        |  3 +-
 drivers/usb/gadget/function/f_subset.c            |  2 +-
 drivers/usb/gadget/function/f_tcm.c               |  3 +-
 drivers/usb/musb/musb_core.c                      |  3 +-
 drivers/usb/serial/cp210x.c                       | 20 ++++-
 drivers/usb/serial/ftdi_sio.c                     |  1 +
 drivers/usb/serial/ftdi_sio_ids.h                 |  1 +
 drivers/usb/serial/omninet.c                      |  2 +
 drivers/usb/serial/quatech2.c                     |  6 +-
 drivers/usb/typec/mux.c                           |  2 +-
 drivers/usb/typec/tcpm/wcove.c                    |  2 +-
 drivers/usb/typec/ucsi/ucsi.c                     |  1 +
 fs/btrfs/disk-io.c                                | 26 +++++--
 fs/btrfs/file.c                                   |  4 +-
 fs/nfs/client.c                                   |  2 +-
 fs/nfs/nfs4_fs.h                                  |  1 +
 fs/nfs/nfs4client.c                               |  2 +-
 fs/nfs/nfs4proc.c                                 | 29 ++++++-
 fs/proc/base.c                                    |  9 ++-
 include/asm-generic/vmlinux.lds.h                 |  1 +
 include/linux/kvm_host.h                          | 10 ++-
 include/linux/mlx4/device.h                       |  1 +
 include/linux/usb/pd.h                            |  2 +-
 kernel/cgroup/cgroup-v1.c                         |  4 +
 kernel/cgroup/cgroup.c                            | 13 ++--
 kernel/events/core.c                              |  2 +
 kernel/sched/fair.c                               |  2 +-
 kernel/trace/ftrace.c                             |  8 +-
 kernel/trace/trace.c                              |  2 +-
 kernel/workqueue.c                                | 12 ++-
 net/netlink/af_netlink.c                          |  6 +-
 net/nfc/rawsock.c                                 |  2 +-
 net/rds/connection.c                              | 23 ++++--
 net/rds/tcp.c                                     |  4 +-
 net/rds/tcp.h                                     |  3 +-
 net/rds/tcp_listen.c                              |  6 ++
 sound/soc/codecs/max98088.c                       | 13 +++-
 sound/soc/codecs/sti-sas.c                        |  1 +
 sound/soc/intel/boards/bytcr_rt5640.c             | 25 ++++++
 tools/perf/util/session.c                         |  1 +
 98 files changed, 561 insertions(+), 187 deletions(-)

[PATCH 5.4 01/84] proc: Track /proc/$pid/attr/ opener mm_struct

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

commit 591a22c14d3f45cc38bd1931c593c221df2f1881 upstream.

Commit bfb819ea20ce ("proc: Check /proc/$pid/attr/ writes against file opener")
tried to make sure that there could not be a confusion between the opener of
a /proc/$pid/attr/ file and the writer. It used struct cred to make sure
the privileges didn't change. However, there were existing cases where a more
privileged thread was passing the opened fd to a differently privileged thread
(during container setup). Instead, use mm_struct to track whether the opener
and writer are still the same process. (This is what several other proc files
already do, though for different reasons.)

Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Reported-by: Andrea Righi <andrea.righi@canonical.com>
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Fixes: bfb819ea20ce ("proc: Check /proc/$pid/attr/ writes against file opener")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/proc/base.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -2527,6 +2527,11 @@ out:
 }
 
 #ifdef CONFIG_SECURITY
+static int proc_pid_attr_open(struct inode *inode, struct file *file)
+{
+	return __mem_open(inode, file, PTRACE_MODE_READ_FSCREDS);
+}
+
 static ssize_t proc_pid_attr_read(struct file * file, char __user * buf,
 				  size_t count, loff_t *ppos)
 {
@@ -2557,7 +2562,7 @@ static ssize_t proc_pid_attr_write(struc
 	int rv;
 
 	/* A task may only write when it was the opener. */
-	if (file->f_cred != current_real_cred())
+	if (file->private_data != current->mm)
 		return -EPERM;
 
 	rcu_read_lock();
@@ -2607,9 +2612,11 @@ out:
 }
 
 static const struct file_operations proc_pid_attr_operations = {
+	.open		= proc_pid_attr_open,
 	.read		= proc_pid_attr_read,
 	.write		= proc_pid_attr_write,
 	.llseek		= generic_file_llseek,
+	.release	= mem_release,
 };
 
 #define LSM_DIR_OPS(LSM) \

[PATCH 5.4 02/84] ASoC: max98088: fix ni clock divider calculation

[Greg Kroah-Hartman]

From: Marco Felsch <m.felsch@pengutronix.de>

[ Upstream commit 6c9762a78c325107dc37d20ee21002b841679209 ]

The ni1/ni2 ratio formula [1] uses the pclk which is the prescaled mclk.
The max98088 datasheet [2] has no such formula but table-12 equals so
we can assume that it is the same for both devices.

While on it make use of DIV_ROUND_CLOSEST_ULL().

[1] https://datasheets.maximintegrated.com/en/ds/MAX98089.pdf; page 86
[2] https://datasheets.maximintegrated.com/en/ds/MAX98088.pdf; page 82

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20210423135402.32105-1-m.felsch@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/max98088.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/max98088.c b/sound/soc/codecs/max98088.c
index f031d2caa8b7..fa4cdbfd0b80 100644
--- a/sound/soc/codecs/max98088.c
+++ b/sound/soc/codecs/max98088.c
@@ -41,6 +41,7 @@ struct max98088_priv {
 	enum max98088_type devtype;
 	struct max98088_pdata *pdata;
 	struct clk *mclk;
+	unsigned char mclk_prescaler;
 	unsigned int sysclk;
 	struct max98088_cdata dai[2];
 	int eq_textcnt;
@@ -998,13 +999,16 @@ static int max98088_dai1_hw_params(struct snd_pcm_substream *substream,
        /* Configure NI when operating as master */
        if (snd_soc_component_read32(component, M98088_REG_14_DAI1_FORMAT)
                & M98088_DAI_MAS) {
+               unsigned long pclk;
+
                if (max98088->sysclk == 0) {
                        dev_err(component->dev, "Invalid system clock frequency\n");
                        return -EINVAL;
                }
                ni = 65536ULL * (rate < 50000 ? 96ULL : 48ULL)
                                * (unsigned long long int)rate;
-               do_div(ni, (unsigned long long int)max98088->sysclk);
+               pclk = DIV_ROUND_CLOSEST(max98088->sysclk, max98088->mclk_prescaler);
+               ni = DIV_ROUND_CLOSEST_ULL(ni, pclk);
                snd_soc_component_write(component, M98088_REG_12_DAI1_CLKCFG_HI,
                        (ni >> 8) & 0x7F);
                snd_soc_component_write(component, M98088_REG_13_DAI1_CLKCFG_LO,
@@ -1065,13 +1069,16 @@ static int max98088_dai2_hw_params(struct snd_pcm_substream *substream,
        /* Configure NI when operating as master */
        if (snd_soc_component_read32(component, M98088_REG_1C_DAI2_FORMAT)
                & M98088_DAI_MAS) {
+               unsigned long pclk;
+
                if (max98088->sysclk == 0) {
                        dev_err(component->dev, "Invalid system clock frequency\n");
                        return -EINVAL;
                }
                ni = 65536ULL * (rate < 50000 ? 96ULL : 48ULL)
                                * (unsigned long long int)rate;
-               do_div(ni, (unsigned long long int)max98088->sysclk);
+               pclk = DIV_ROUND_CLOSEST(max98088->sysclk, max98088->mclk_prescaler);
+               ni = DIV_ROUND_CLOSEST_ULL(ni, pclk);
                snd_soc_component_write(component, M98088_REG_1A_DAI2_CLKCFG_HI,
                        (ni >> 8) & 0x7F);
                snd_soc_component_write(component, M98088_REG_1B_DAI2_CLKCFG_LO,
@@ -1113,8 +1120,10 @@ static int max98088_dai_set_sysclk(struct snd_soc_dai *dai,
         */
        if ((freq >= 10000000) && (freq < 20000000)) {
                snd_soc_component_write(component, M98088_REG_10_SYS_CLK, 0x10);
+               max98088->mclk_prescaler = 1;
        } else if ((freq >= 20000000) && (freq < 30000000)) {
                snd_soc_component_write(component, M98088_REG_10_SYS_CLK, 0x20);
+               max98088->mclk_prescaler = 2;
        } else {
                dev_err(component->dev, "Invalid master clock frequency\n");
                return -EINVAL;
-- 
2.30.2

[PATCH 5.4 03/84] spi: Fix spi device unregister flow

[Greg Kroah-Hartman]

From: Saravana Kannan <saravanak@google.com>

[ Upstream commit c7299fea67696db5bd09d924d1f1080d894f92ef ]

When an SPI device is unregistered, the spi->controller->cleanup() is
called in the device's release callback. That's wrong for a couple of
reasons:

1. spi_dev_put() can be called before spi_add_device() is called. And
   it's spi_add_device() that calls spi_setup(). This will cause clean()
   to get called without the spi device ever being setup.

2. There's no guarantee that the controller's driver would be present by
   the time the spi device's release function gets called.

3. It also causes "sleeping in atomic context" stack dump[1] when device
   link deletion code does a put_device() on the spi device.

Fix these issues by simply moving the cleanup from the device release
callback to the actual spi_unregister_device() function.

[1] - https://lore.kernel.org/lkml/CAHp75Vc=FCGcUyS0v6fnxme2YJ+qD+Y-hQDQLa2JhWNON9VmsQ@mail.gmail.com/

Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210426235638.1285530-1-saravanak@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 7592d4de20c9..c4b80cf825b8 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -47,10 +47,6 @@ static void spidev_release(struct device *dev)
 {
 	struct spi_device	*spi = to_spi_device(dev);
 
-	/* spi controllers may cleanup for released devices */
-	if (spi->controller->cleanup)
-		spi->controller->cleanup(spi);
-
 	spi_controller_put(spi->controller);
 	kfree(spi->driver_override);
 	kfree(spi);
@@ -549,6 +545,12 @@ static int spi_dev_check(struct device *dev, void *data)
 	return 0;
 }
 
+static void spi_cleanup(struct spi_device *spi)
+{
+	if (spi->controller->cleanup)
+		spi->controller->cleanup(spi);
+}
+
 /**
  * spi_add_device - Add spi_device allocated with spi_alloc_device
  * @spi: spi_device to register
@@ -613,11 +615,13 @@ int spi_add_device(struct spi_device *spi)
 
 	/* Device may be bound to an active driver when this returns */
 	status = device_add(&spi->dev);
-	if (status < 0)
+	if (status < 0) {
 		dev_err(dev, "can't add %s, status %d\n",
 				dev_name(&spi->dev), status);
-	else
+		spi_cleanup(spi);
+	} else {
 		dev_dbg(dev, "registered child %s\n", dev_name(&spi->dev));
+	}
 
 done:
 	mutex_unlock(&spi_add_lock);
@@ -704,6 +708,8 @@ void spi_unregister_device(struct spi_device *spi)
 	if (!spi)
 		return;
 
+	spi_cleanup(spi);
+
 	if (spi->dev.of_node) {
 		of_node_clear_flag(spi->dev.of_node, OF_POPULATED);
 		of_node_put(spi->dev.of_node);
-- 
2.30.2

[PATCH 5.4 04/84] net/nfc/rawsock.c: fix a permission check bug

[Greg Kroah-Hartman]

From: Jeimon <jjjinmeng.zhou@gmail.com>

[ Upstream commit 8ab78863e9eff11910e1ac8bcf478060c29b379e ]

The function rawsock_create() calls a privileged function sk_alloc(), which requires a ns-aware check to check net->user_ns, i.e., ns_capable(). However, the original code checks the init_user_ns using capable(). So we replace the capable() with ns_capable().

Signed-off-by: Jeimon <jjjinmeng.zhou@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/nfc/rawsock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/nfc/rawsock.c b/net/nfc/rawsock.c
index 23d5e56306a4..8d649f4aee79 100644
--- a/net/nfc/rawsock.c
+++ b/net/nfc/rawsock.c
@@ -333,7 +333,7 @@ static int rawsock_create(struct net *net, struct socket *sock,
 		return -ESOCKTNOSUPPORT;
 
 	if (sock->type == SOCK_RAW) {
-		if (!capable(CAP_NET_RAW))
+		if (!ns_capable(net->user_ns, CAP_NET_RAW))
 			return -EPERM;
 		sock->ops = &rawsock_raw_ops;
 	} else {
-- 
2.30.2

[PATCH 5.4 05/84] usb: cdns3: Fix runtime PM imbalance on error

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit e5b913496099527abe46e175e5e2c844367bded0 ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.

Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/cdns3/gadget.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c
index c0c39cf30387..f32f00c49571 100644
--- a/drivers/usb/cdns3/gadget.c
+++ b/drivers/usb/cdns3/gadget.c
@@ -2706,8 +2706,10 @@ static int __cdns3_gadget_init(struct cdns3 *cdns)
 	pm_runtime_get_sync(cdns->dev);
 
 	ret = cdns3_gadget_start(cdns);
-	if (ret)
+	if (ret) {
+		pm_runtime_put_sync(cdns->dev);
 		return ret;
+	}
 
 	/*
 	 * Because interrupt line can be shared with other components in
-- 
2.30.2

[PATCH 5.4 06/84] ASoC: Intel: bytcr_rt5640: Add quirk for the Glavey TM800A550L tablet

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 28c268d3acdd4cbcd2ac320b85609e77f84e74a7 ]

Add a quirk for the Glavey TM800A550L tablet, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210508150146.28403-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 46a81d4f0b2d..1e6c86f2306f 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -568,6 +568,17 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF1 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Glavey TM800A550L */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
+			/* Above strings are too generic, also match on BIOS version */
+			DMI_MATCH(DMI_BIOS_VERSION, "ZY-8-BI-PX4S70VTR400-X423B-005-D"),
+		},
+		.driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{
 		.matches = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-- 
2.30.2

[PATCH 5.4 07/84] ASoC: Intel: bytcr_rt5640: Add quirk for the Lenovo Miix 3-830 tablet

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit f0353e1f53f92f7b3da91e6669f5d58ee222ebe8 ]

The Lenovo Miix 3-830 tablet has only 1 speaker, has an internal analog
mic on IN1 and uses JD2 for jack-detect, add a quirk to automatically
apply these settings on Lenovo Miix 3-830 tablets.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210508150146.28403-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 1e6c86f2306f..c67b86e2d0c0 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -646,6 +646,20 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_MONO_SPEAKER |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Lenovo Miix 3-830 */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "Lenovo MIIX 3-830"),
+		},
+		.driver_data = (void *)(BYT_RT5640_IN1_MAP |
+					BYT_RT5640_JD_SRC_JD2_IN4N |
+					BYT_RT5640_OVCD_TH_2000UA |
+					BYT_RT5640_OVCD_SF_0P75 |
+					BYT_RT5640_MONO_SPEAKER |
+					BYT_RT5640_DIFF_MIC |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{	/* Linx Linx7 tablet */
 		.matches = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LINX"),
-- 
2.30.2

[PATCH 5.4 08/84] vfio-ccw: Serialize FSM IDLE state with I/O completion

[Greg Kroah-Hartman]

From: Eric Farman <farman@linux.ibm.com>

[ Upstream commit 2af7a834a435460d546f0cf0a8b8e4d259f1d910 ]

Today, the stacked call to vfio_ccw_sch_io_todo() does three things:

  1) Update a solicited IRB with CP information, and release the CP
     if the interrupt was the end of a START operation.
  2) Copy the IRB data into the io_region, under the protection of
     the io_mutex
  3) Reset the vfio-ccw FSM state to IDLE to acknowledge that
     vfio-ccw can accept more work.

The trouble is that step 3 is (A) invoked for both solicited and
unsolicited interrupts, and (B) sitting after the mutex for step 2.
This second piece becomes a problem if it processes an interrupt
for a CLEAR SUBCHANNEL while another thread initiates a START,
thus allowing the CP and FSM states to get out of sync. That is:

    CPU 1                           CPU 2
    fsm_do_clear()
    fsm_irq()
                                    fsm_io_request()
    vfio_ccw_sch_io_todo()
                                    fsm_io_helper()

Since the FSM state and CP should be kept in sync, let's make a
note when the CP is released, and rely on that as an indication
that the FSM should also be reset at the end of this routine and
open up the device for more work.

Signed-off-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210511195631.3995081-4-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/cio/vfio_ccw_drv.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/s390/cio/vfio_ccw_drv.c b/drivers/s390/cio/vfio_ccw_drv.c
index 339a6bc0339b..fd590d1cffc1 100644
--- a/drivers/s390/cio/vfio_ccw_drv.c
+++ b/drivers/s390/cio/vfio_ccw_drv.c
@@ -83,6 +83,7 @@ static void vfio_ccw_sch_io_todo(struct work_struct *work)
 	struct vfio_ccw_private *private;
 	struct irb *irb;
 	bool is_final;
+	bool cp_is_finished = false;
 
 	private = container_of(work, struct vfio_ccw_private, io_work);
 	irb = &private->irb;
@@ -91,14 +92,21 @@ static void vfio_ccw_sch_io_todo(struct work_struct *work)
 		     (SCSW_ACTL_DEVACT | SCSW_ACTL_SCHACT));
 	if (scsw_is_solicited(&irb->scsw)) {
 		cp_update_scsw(&private->cp, &irb->scsw);
-		if (is_final && private->state == VFIO_CCW_STATE_CP_PENDING)
+		if (is_final && private->state == VFIO_CCW_STATE_CP_PENDING) {
 			cp_free(&private->cp);
+			cp_is_finished = true;
+		}
 	}
 	mutex_lock(&private->io_mutex);
 	memcpy(private->io_region->irb_area, irb, sizeof(*irb));
 	mutex_unlock(&private->io_mutex);
 
-	if (private->mdev && is_final)
+	/*
+	 * Reset to IDLE only if processing of a channel program
+	 * has finished. Do not overwrite a possible processing
+	 * state if the final interrupt was for HSCH or CSCH.
+	 */
+	if (private->mdev && cp_is_finished)
 		private->state = VFIO_CCW_STATE_IDLE;
 
 	if (private->io_trigger)
-- 
2.30.2

[PATCH 5.4 09/84] ASoC: sti-sas: add missing MODULE_DEVICE_TABLE

[Greg Kroah-Hartman]

From: Zou Wei <zou_wei@huawei.com>

[ Upstream commit e072b2671606c77538d6a4dd5dda80b508cb4816 ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1620789145-14936-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/sti-sas.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/codecs/sti-sas.c b/sound/soc/codecs/sti-sas.c
index ec9933b054ad..423daac9d5a9 100644
--- a/sound/soc/codecs/sti-sas.c
+++ b/sound/soc/codecs/sti-sas.c
@@ -411,6 +411,7 @@ static const struct of_device_id sti_sas_dev_match[] = {
 	},
 	{},
 };
+MODULE_DEVICE_TABLE(of, sti_sas_dev_match);
 
 static int sti_sas_driver_probe(struct platform_device *pdev)
 {
-- 
2.30.2

[PATCH 5.4 10/84] spi: sprd: Add missing MODULE_DEVICE_TABLE

[Greg Kroah-Hartman]

From: Chunyan Zhang <chunyan.zhang@unisoc.com>

[ Upstream commit 7907cad7d07e0055789ec0c534452f19dfe1fc80 ]

MODULE_DEVICE_TABLE is used to extract the device information out of the
driver and builds a table when being compiled. If using this macro,
kernel can find the driver if available when the device is plugged in,
and then loads that driver and initializes the device.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20210512093534.243040-1-zhang.lyra@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-sprd.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-sprd.c b/drivers/spi/spi-sprd.c
index c2bdf19ccdd2..44dc7b5b45ad 100644
--- a/drivers/spi/spi-sprd.c
+++ b/drivers/spi/spi-sprd.c
@@ -1066,6 +1066,7 @@ static const struct of_device_id sprd_spi_of_match[] = {
 	{ .compatible = "sprd,sc9860-spi", },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, sprd_spi_of_match);
 
 static struct platform_driver sprd_spi_driver = {
 	.driver = {
-- 
2.30.2

[PATCH 5.4 11/84] isdn: mISDN: netjet: Fix crash in nj_probe:

[Greg Kroah-Hartman]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 9f6f852550d0e1b7735651228116ae9d300f69b3 ]

'nj_setup' in netjet.c might fail with -EIO and in this case
'card->irq' is initialized and is bigger than zero. A subsequent call to
'nj_release' will free the irq that has not been requested.

Fix this bug by deleting the previous assignment to 'card->irq' and just
keep the assignment before 'request_irq'.

The KASAN's log reveals it:

[    3.354615 ] WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1826
free_irq+0x100/0x480
[    3.355112 ] Modules linked in:
[    3.355310 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00144-g25a1298726e #13
[    3.355816 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.356552 ] RIP: 0010:free_irq+0x100/0x480
[    3.356820 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18
4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5
ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80
[    3.358012 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082
[    3.358357 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX:
0000000000000000
[    3.358814 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI:
00000000ffffffff
[    3.359272 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09:
0000000000000000
[    3.359732 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12:
0000000000000000
[    3.360195 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15:
ffff888104dc80a8
[    3.360652 ] FS:  0000000000000000(0000) GS:ffff88817bc00000(0000)
knlGS:0000000000000000
[    3.361170 ] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.361538 ] CR2: 0000000000000000 CR3: 000000000582e000 CR4:
00000000000006f0
[    3.362003 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[    3.362175 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[    3.362175 ] Call Trace:
[    3.362175 ]  nj_release+0x51/0x1e0
[    3.362175 ]  nj_probe+0x450/0x950
[    3.362175 ]  ? pci_device_remove+0x110/0x110
[    3.362175 ]  local_pci_probe+0x45/0xa0
[    3.362175 ]  pci_device_probe+0x12b/0x1d0
[    3.362175 ]  really_probe+0x2a9/0x610
[    3.362175 ]  driver_probe_device+0x90/0x1d0
[    3.362175 ]  ? mutex_lock_nested+0x1b/0x20
[    3.362175 ]  device_driver_attach+0x68/0x70
[    3.362175 ]  __driver_attach+0x124/0x1b0
[    3.362175 ]  ? device_driver_attach+0x70/0x70
[    3.362175 ]  bus_for_each_dev+0xbb/0x110
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  driver_attach+0x27/0x30
[    3.362175 ]  bus_add_driver+0x1eb/0x2a0
[    3.362175 ]  driver_register+0xa9/0x180
[    3.362175 ]  __pci_register_driver+0x82/0x90
[    3.362175 ]  ? w6692_init+0x38/0x38
[    3.362175 ]  nj_init+0x36/0x38
[    3.362175 ]  do_one_initcall+0x7f/0x3d0
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  ? rcu_read_lock_sched_held+0x4f/0x80
[    3.362175 ]  kernel_init_freeable+0x2aa/0x301
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  kernel_init+0x18/0x190
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ret_from_fork+0x1f/0x30
[    3.362175 ] Kernel panic - not syncing: panic_on_warn set ...
[    3.362175 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00144-g25a1298726e #13
[    3.362175 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.362175 ] Call Trace:
[    3.362175 ]  dump_stack+0xba/0xf5
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  panic+0x15a/0x3f2
[    3.362175 ]  ? __warn+0xf2/0x150
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  __warn+0x108/0x150
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  report_bug+0x119/0x1c0
[    3.362175 ]  handle_bug+0x3b/0x80
[    3.362175 ]  exc_invalid_op+0x18/0x70
[    3.362175 ]  asm_exc_invalid_op+0x12/0x20
[    3.362175 ] RIP: 0010:free_irq+0x100/0x480
[    3.362175 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18
4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5
ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80
[    3.362175 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082
[    3.362175 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX:
0000000000000000
[    3.362175 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI:
00000000ffffffff
[    3.362175 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09:
0000000000000000
[    3.362175 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12:
0000000000000000
[    3.362175 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15:
ffff888104dc80a8
[    3.362175 ]  ? vprintk+0x76/0x150
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  nj_release+0x51/0x1e0
[    3.362175 ]  nj_probe+0x450/0x950
[    3.362175 ]  ? pci_device_remove+0x110/0x110
[    3.362175 ]  local_pci_probe+0x45/0xa0
[    3.362175 ]  pci_device_probe+0x12b/0x1d0
[    3.362175 ]  really_probe+0x2a9/0x610
[    3.362175 ]  driver_probe_device+0x90/0x1d0
[    3.362175 ]  ? mutex_lock_nested+0x1b/0x20
[    3.362175 ]  device_driver_attach+0x68/0x70
[    3.362175 ]  __driver_attach+0x124/0x1b0
[    3.362175 ]  ? device_driver_attach+0x70/0x70
[    3.362175 ]  bus_for_each_dev+0xbb/0x110
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  driver_attach+0x27/0x30
[    3.362175 ]  bus_add_driver+0x1eb/0x2a0
[    3.362175 ]  driver_register+0xa9/0x180
[    3.362175 ]  __pci_register_driver+0x82/0x90
[    3.362175 ]  ? w6692_init+0x38/0x38
[    3.362175 ]  nj_init+0x36/0x38
[    3.362175 ]  do_one_initcall+0x7f/0x3d0
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  ? rcu_read_lock_sched_held+0x4f/0x80
[    3.362175 ]  kernel_init_freeable+0x2aa/0x301
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  kernel_init+0x18/0x190
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ret_from_fork+0x1f/0x30
[    3.362175 ] Dumping ftrace buffer:
[    3.362175 ]    (ftrace buffer empty)
[    3.362175 ] Kernel Offset: disabled
[    3.362175 ] Rebooting in 1 seconds..

Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/hardware/mISDN/netjet.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/isdn/hardware/mISDN/netjet.c b/drivers/isdn/hardware/mISDN/netjet.c
index 61caa7e50b9a..9e6aab04f9d6 100644
--- a/drivers/isdn/hardware/mISDN/netjet.c
+++ b/drivers/isdn/hardware/mISDN/netjet.c
@@ -1100,7 +1100,6 @@ nj_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		card->typ = NETJET_S_TJ300;
 
 	card->base = pci_resource_start(pdev, 0);
-	card->irq = pdev->irq;
 	pci_set_drvdata(pdev, card);
 	err = setup_instance(card);
 	if (err)
-- 
2.30.2

[PATCH 5.4 12/84] bonding: init notify_work earlier to avoid uninitialized use

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 35d96e631860226d5dc4de0fad0a415362ec2457 ]

If bond_kobj_init() or later kzalloc() in bond_alloc_slave() fail,
then we call kobject_put() on the slave->kobj. This in turn calls
the release function slave_kobj_release() which will always try to
cancel_delayed_work_sync(&slave->notify_work), which shouldn't be
done on an uninitialized work struct.

Always initialize the work struct earlier to avoid problems here.

Syzbot bisected this down to a completely pointless commit, some
fault injection may have been at work here that caused the alloc
failure in the first place, which may interact badly with bisect.

Reported-by: syzbot+bfda097c12a00c8cae67@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/bonding/bond_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 2bc4cb9e3095..e21643377162 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1335,6 +1335,7 @@ static struct slave *bond_alloc_slave(struct bonding *bond,
 
 	slave->bond = bond;
 	slave->dev = slave_dev;
+	INIT_DELAYED_WORK(&slave->notify_work, bond_netdev_notify_work);
 
 	if (bond_kobj_init(slave))
 		return NULL;
@@ -1347,7 +1348,6 @@ static struct slave *bond_alloc_slave(struct bonding *bond,
 			return NULL;
 		}
 	}
-	INIT_DELAYED_WORK(&slave->notify_work, bond_netdev_notify_work);
 
 	return slave;
 }
-- 
2.30.2

[PATCH 5.4 13/84] netlink: disable IRQs for netlink_lock_table()

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 1d482e666b8e74c7555dbdfbfb77205eeed3ff2d ]

Syzbot reports that in mac80211 we have a potential deadlock
between our "local->stop_queue_reasons_lock" (spinlock) and
netlink's nl_table_lock (rwlock). This is because there's at
least one situation in which we might try to send a netlink
message with this spinlock held while it is also possible to
take the spinlock from a hardirq context, resulting in the
following deadlock scenario reported by lockdep:

       CPU0                    CPU1
       ----                    ----
  lock(nl_table_lock);
                               local_irq_disable();
                               lock(&local->queue_stop_reason_lock);
                               lock(nl_table_lock);
  <Interrupt>
    lock(&local->queue_stop_reason_lock);

This seems valid, we can take the queue_stop_reason_lock in
any kind of context ("CPU0"), and call ieee80211_report_ack_skb()
with the spinlock held and IRQs disabled ("CPU1") in some
code path (ieee80211_do_stop() via ieee80211_free_txskb()).

Short of disallowing netlink use in scenarios like these
(which would be rather complex in mac80211's case due to
the deep callchain), it seems the only fix for this is to
disable IRQs while nl_table_lock is held to avoid hitting
this scenario, this disallows the "CPU0" portion of the
reported deadlock.

Note that the writer side (netlink_table_grab()) already
disables IRQs for this lock.

Unfortunately though, this seems like a huge hammer, and
maybe the whole netlink table locking should be reworked.

Reported-by: syzbot+69ff9dff50dcfe14ddd4@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netlink/af_netlink.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index c2a5174387ff..9d993b4cf1af 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -452,11 +452,13 @@ void netlink_table_ungrab(void)
 static inline void
 netlink_lock_table(void)
 {
+	unsigned long flags;
+
 	/* read_lock() synchronizes us to netlink_table_grab */
 
-	read_lock(&nl_table_lock);
+	read_lock_irqsave(&nl_table_lock, flags);
 	atomic_inc(&nl_table_users);
-	read_unlock(&nl_table_lock);
+	read_unlock_irqrestore(&nl_table_lock, flags);
 }
 
 static inline void
-- 
2.30.2

[PATCH 5.4 14/84] net: mdiobus: get rid of a BUG_ON()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 1dde47a66d4fb181830d6fa000e5ea86907b639e ]

We spotted a bug recently during a review where a driver was
unregistering a bus that wasn't registered, which would trigger this
BUG_ON().  Let's handle that situation more gracefully, and just print
a warning and return.

Reported-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/mdio_bus.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 229e480179ff..5bf06eac04ba 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -453,7 +453,8 @@ void mdiobus_unregister(struct mii_bus *bus)
 	struct mdio_device *mdiodev;
 	int i;
 
-	BUG_ON(bus->state != MDIOBUS_REGISTERED);
+	if (WARN_ON_ONCE(bus->state != MDIOBUS_REGISTERED))
+		return;
 	bus->state = MDIOBUS_UNREGISTERED;
 
 	for (i = 0; i < PHY_MAX_ADDR; i++) {
-- 
2.30.2

[PATCH 5.4 15/84] cgroup: disable controllers at parse time

[Greg Kroah-Hartman]

From: Shakeel Butt <shakeelb@google.com>

[ Upstream commit 45e1ba40837ac2f6f4d4716bddb8d44bd7e4a251 ]

This patch effectively reverts the commit a3e72739b7a7 ("cgroup: fix
too early usage of static_branch_disable()"). The commit 6041186a3258
("init: initialize jump labels before command line option parsing") has
moved the jump_label_init() before parse_args() which has made the
commit a3e72739b7a7 unnecessary. On the other hand there are
consequences of disabling the controllers later as there are subsystems
doing the controller checks for different decisions. One such incident
is reported [1] regarding the memory controller and its impact on memory
reclaim code.

[1] https://lore.kernel.org/linux-mm/921e53f3-4b13-aab8-4a9e-e83ff15371e4@nec.com

Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reported-by: NOMURA JUNICHI(野村　淳一) <junichi.nomura@nec.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Jun'ichi Nomura <junichi.nomura@nec.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/cgroup/cgroup.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/kernel/cgroup/cgroup.c b/kernel/cgroup/cgroup.c
index 37db8eba149a..ede370ec245d 100644
--- a/kernel/cgroup/cgroup.c
+++ b/kernel/cgroup/cgroup.c
@@ -5721,8 +5721,6 @@ int __init cgroup_init_early(void)
 	return 0;
 }
 
-static u16 cgroup_disable_mask __initdata;
-
 /**
  * cgroup_init - cgroup initialization
  *
@@ -5781,12 +5779,8 @@ int __init cgroup_init(void)
 		 * disabled flag and cftype registration needs kmalloc,
 		 * both of which aren't available during early_init.
 		 */
-		if (cgroup_disable_mask & (1 << ssid)) {
-			static_branch_disable(cgroup_subsys_enabled_key[ssid]);
-			printk(KERN_INFO "Disabling %s control group subsystem\n",
-			       ss->name);
+		if (!cgroup_ssid_enabled(ssid))
 			continue;
-		}
 
 		if (cgroup1_ssid_disabled(ssid))
 			printk(KERN_INFO "Disabling %s control group subsystem in v1 mounts\n",
@@ -6173,7 +6167,10 @@ static int __init cgroup_disable(char *str)
 			if (strcmp(token, ss->name) &&
 			    strcmp(token, ss->legacy_name))
 				continue;
-			cgroup_disable_mask |= 1 << i;
+
+			static_branch_disable(cgroup_subsys_enabled_key[i]);
+			pr_info("Disabling %s control group subsystem\n",
+				ss->name);
 		}
 	}
 	return 1;
-- 
2.30.2

[PATCH 5.4 16/84] wq: handle VM suspension in stall detection

[Greg Kroah-Hartman]

From: Sergey Senozhatsky <senozhatsky@chromium.org>

[ Upstream commit 940d71c6462e8151c78f28e4919aa8882ff2054e ]

If VCPU is suspended (VM suspend) in wq_watchdog_timer_fn() then
once this VCPU resumes it will see the new jiffies value, while it
may take a while before IRQ detects PVCLOCK_GUEST_STOPPED on this
VCPU and updates all the watchdogs via pvclock_touch_watchdogs().
There is a small chance of misreported WQ stalls in the meantime,
because new jiffies is time_after() old 'ts + thresh'.

wq_watchdog_timer_fn()
{
	for_each_pool(pool, pi) {
		if (time_after(jiffies, ts + thresh)) {
			pr_emerg("BUG: workqueue lockup - pool");
		}
	}
}

Save jiffies at the beginning of this function and use that value
for stall detection. If VM gets suspended then we continue using
"old" jiffies value and old WQ touch timestamps. If IRQ at some
point restarts the stall detection cycle (pvclock_touch_watchdogs())
then old jiffies will always be before new 'ts + thresh'.

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/workqueue.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 5d7092e32912..8f41499d8257 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -50,6 +50,7 @@
 #include <linux/uaccess.h>
 #include <linux/sched/isolation.h>
 #include <linux/nmi.h>
+#include <linux/kvm_para.h>
 
 #include "workqueue_internal.h"
 
@@ -5734,6 +5735,7 @@ static void wq_watchdog_timer_fn(struct timer_list *unused)
 {
 	unsigned long thresh = READ_ONCE(wq_watchdog_thresh) * HZ;
 	bool lockup_detected = false;
+	unsigned long now = jiffies;
 	struct worker_pool *pool;
 	int pi;
 
@@ -5748,6 +5750,12 @@ static void wq_watchdog_timer_fn(struct timer_list *unused)
 		if (list_empty(&pool->worklist))
 			continue;
 
+		/*
+		 * If a virtual machine is stopped by the host it can look to
+		 * the watchdog like a stall.
+		 */
+		kvm_check_and_clear_guest_paused();
+
 		/* get the latest of pool and touched timestamps */
 		pool_ts = READ_ONCE(pool->watchdog_ts);
 		touched = READ_ONCE(wq_watchdog_touched);
@@ -5766,12 +5774,12 @@ static void wq_watchdog_timer_fn(struct timer_list *unused)
 		}
 
 		/* did we stall? */
-		if (time_after(jiffies, ts + thresh)) {
+		if (time_after(now, ts + thresh)) {
 			lockup_detected = true;
 			pr_emerg("BUG: workqueue lockup - pool");
 			pr_cont_pool_info(pool);
 			pr_cont(" stuck for %us!\n",
-				jiffies_to_msecs(jiffies - pool_ts) / 1000);
+				jiffies_to_msecs(now - pool_ts) / 1000);
 		}
 	}
 
-- 
2.30.2

[PATCH 5.4 17/84] net/qla3xxx: fix schedule while atomic in ql_sem_spinlock

[Greg Kroah-Hartman]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 13a6f3153922391e90036ba2267d34eed63196fc ]

When calling the 'ql_sem_spinlock', the driver has already acquired the
spin lock, so the driver should not call 'ssleep' in atomic context.

This bug can be fixed by using 'mdelay' instead of 'ssleep'.

The KASAN's log reveals it:

[    3.238124 ] BUG: scheduling while atomic: swapper/0/1/0x00000002
[    3.238748 ] 2 locks held by swapper/0/1:
[    3.239151 ]  #0: ffff88810177b240 (&dev->mutex){....}-{3:3}, at:
__device_driver_lock+0x41/0x60
[    3.240026 ]  #1: ffff888107c60e28 (&qdev->hw_lock){....}-{2:2}, at:
ql3xxx_probe+0x2aa/0xea0
[    3.240873 ] Modules linked in:
[    3.241187 ] irq event stamp: 460854
[    3.241541 ] hardirqs last  enabled at (460853): [<ffffffff843051bf>]
_raw_spin_unlock_irqrestore+0x4f/0x70
[    3.242245 ] hardirqs last disabled at (460854): [<ffffffff843058ca>]
_raw_spin_lock_irqsave+0x2a/0x70
[    3.242245 ] softirqs last  enabled at (446076): [<ffffffff846002e4>]
__do_softirq+0x2e4/0x4b1
[    3.242245 ] softirqs last disabled at (446069): [<ffffffff811ba5e0>]
irq_exit_rcu+0x100/0x110
[    3.242245 ] Preemption disabled at:
[    3.242245 ] [<ffffffff828ca5ba>] ql3xxx_probe+0x2aa/0xea0
[    3.242245 ] Kernel panic - not syncing: scheduling while atomic
[    3.242245 ] CPU: 2 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00145
-gee7dc339169-dirty #16
[    3.242245 ] Call Trace:
[    3.242245 ]  dump_stack+0xba/0xf5
[    3.242245 ]  ? ql3xxx_probe+0x1f0/0xea0
[    3.242245 ]  panic+0x15a/0x3f2
[    3.242245 ]  ? vprintk+0x76/0x150
[    3.242245 ]  ? ql3xxx_probe+0x2aa/0xea0
[    3.242245 ]  __schedule_bug+0xae/0xe0
[    3.242245 ]  __schedule+0x72e/0xa00
[    3.242245 ]  schedule+0x43/0xf0
[    3.242245 ]  schedule_timeout+0x28b/0x500
[    3.242245 ]  ? del_timer_sync+0xf0/0xf0
[    3.242245 ]  ? msleep+0x2f/0x70
[    3.242245 ]  msleep+0x59/0x70
[    3.242245 ]  ql3xxx_probe+0x307/0xea0
[    3.242245 ]  ? _raw_spin_unlock_irqrestore+0x3a/0x70
[    3.242245 ]  ? pci_device_remove+0x110/0x110
[    3.242245 ]  local_pci_probe+0x45/0xa0
[    3.242245 ]  pci_device_probe+0x12b/0x1d0
[    3.242245 ]  really_probe+0x2a9/0x610
[    3.242245 ]  driver_probe_device+0x90/0x1d0
[    3.242245 ]  ? mutex_lock_nested+0x1b/0x20
[    3.242245 ]  device_driver_attach+0x68/0x70
[    3.242245 ]  __driver_attach+0x124/0x1b0
[    3.242245 ]  ? device_driver_attach+0x70/0x70
[    3.242245 ]  bus_for_each_dev+0xbb/0x110
[    3.242245 ]  ? rdinit_setup+0x45/0x45
[    3.242245 ]  driver_attach+0x27/0x30
[    3.242245 ]  bus_add_driver+0x1eb/0x2a0
[    3.242245 ]  driver_register+0xa9/0x180
[    3.242245 ]  __pci_register_driver+0x82/0x90
[    3.242245 ]  ? yellowfin_init+0x25/0x25
[    3.242245 ]  ql3xxx_driver_init+0x23/0x25
[    3.242245 ]  do_one_initcall+0x7f/0x3d0
[    3.242245 ]  ? rdinit_setup+0x45/0x45
[    3.242245 ]  ? rcu_read_lock_sched_held+0x4f/0x80
[    3.242245 ]  kernel_init_freeable+0x2aa/0x301
[    3.242245 ]  ? rest_init+0x2c0/0x2c0
[    3.242245 ]  kernel_init+0x18/0x190
[    3.242245 ]  ? rest_init+0x2c0/0x2c0
[    3.242245 ]  ? rest_init+0x2c0/0x2c0
[    3.242245 ]  ret_from_fork+0x1f/0x30
[    3.242245 ] Dumping ftrace buffer:
[    3.242245 ]    (ftrace buffer empty)
[    3.242245 ] Kernel Offset: disabled
[    3.242245 ] Rebooting in 1 seconds.

Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qla3xxx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c
index 986f26578d34..5dc36c51636c 100644
--- a/drivers/net/ethernet/qlogic/qla3xxx.c
+++ b/drivers/net/ethernet/qlogic/qla3xxx.c
@@ -115,7 +115,7 @@ static int ql_sem_spinlock(struct ql3_adapter *qdev,
 		value = readl(&port_regs->CommonRegs.semaphoreReg);
 		if ((value & (sem_mask >> 16)) == sem_bits)
 			return 0;
-		ssleep(1);
+		mdelay(1000);
 	} while (--seconds);
 	return -1;
 }
-- 
2.30.2

[PATCH 5.4 18/84] RDS tcp loopback connection can hang

[Greg Kroah-Hartman]

From: Rao Shoaib <rao.shoaib@oracle.com>

[ Upstream commit aced3ce57cd37b5ca332bcacd370d01f5a8c5371 ]

When TCP is used as transport and a program on the
system connects to RDS port 16385, connection is
accepted but denied per the rules of RDS. However,
RDS connections object is left in the list. Next
loopback connection will select that connection
object as it is at the head of list. The connection
attempt will hang as the connection object is set
to connect over TCP which is not allowed

The issue can be reproduced easily, use rds-ping
to ping a local IP address. After that use any
program like ncat to connect to the same IP
address and port 16385. This will hang so ctrl-c out.
Now try rds-ping, it will hang.

To fix the issue this patch adds checks to disallow
the connection object creation and destroys the
connection object.

Signed-off-by: Rao Shoaib <rao.shoaib@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rds/connection.c | 23 +++++++++++++++++------
 net/rds/tcp.c        |  4 ++--
 net/rds/tcp.h        |  3 ++-
 net/rds/tcp_listen.c |  6 ++++++
 4 files changed, 27 insertions(+), 9 deletions(-)

diff --git a/net/rds/connection.c b/net/rds/connection.c
index ed7f2133acc2..c85bd6340eaa 100644
--- a/net/rds/connection.c
+++ b/net/rds/connection.c
@@ -240,12 +240,23 @@ static struct rds_connection *__rds_conn_create(struct net *net,
 	if (loop_trans) {
 		rds_trans_put(loop_trans);
 		conn->c_loopback = 1;
-		if (is_outgoing && trans->t_prefer_loopback) {
-			/* "outgoing" connection - and the transport
-			 * says it wants the connection handled by the
-			 * loopback transport. This is what TCP does.
-			 */
-			trans = &rds_loop_transport;
+		if (trans->t_prefer_loopback) {
+			if (likely(is_outgoing)) {
+				/* "outgoing" connection to local address.
+				 * Protocol says it wants the connection
+				 * handled by the loopback transport.
+				 * This is what TCP does.
+				 */
+				trans = &rds_loop_transport;
+			} else {
+				/* No transport currently in use
+				 * should end up here, but if it
+				 * does, reset/destroy the connection.
+				 */
+				kmem_cache_free(rds_conn_slab, conn);
+				conn = ERR_PTR(-EOPNOTSUPP);
+				goto out;
+			}
 		}
 	}
 
diff --git a/net/rds/tcp.c b/net/rds/tcp.c
index 66121bc6f34e..1402e9166a7e 100644
--- a/net/rds/tcp.c
+++ b/net/rds/tcp.c
@@ -323,8 +323,8 @@ out:
 }
 #endif
 
-static int rds_tcp_laddr_check(struct net *net, const struct in6_addr *addr,
-			       __u32 scope_id)
+int rds_tcp_laddr_check(struct net *net, const struct in6_addr *addr,
+			__u32 scope_id)
 {
 	struct net_device *dev = NULL;
 #if IS_ENABLED(CONFIG_IPV6)
diff --git a/net/rds/tcp.h b/net/rds/tcp.h
index 3c69361d21c7..4620549ecbeb 100644
--- a/net/rds/tcp.h
+++ b/net/rds/tcp.h
@@ -60,7 +60,8 @@ u32 rds_tcp_snd_una(struct rds_tcp_connection *tc);
 u64 rds_tcp_map_seq(struct rds_tcp_connection *tc, u32 seq);
 extern struct rds_transport rds_tcp_transport;
 void rds_tcp_accept_work(struct sock *sk);
-
+int rds_tcp_laddr_check(struct net *net, const struct in6_addr *addr,
+			__u32 scope_id);
 /* tcp_connect.c */
 int rds_tcp_conn_path_connect(struct rds_conn_path *cp);
 void rds_tcp_conn_path_shutdown(struct rds_conn_path *conn);
diff --git a/net/rds/tcp_listen.c b/net/rds/tcp_listen.c
index 810a3a49e947..26a3e18e460d 100644
--- a/net/rds/tcp_listen.c
+++ b/net/rds/tcp_listen.c
@@ -198,6 +198,12 @@ int rds_tcp_accept_one(struct socket *sock)
 	}
 #endif
 
+	if (!rds_tcp_laddr_check(sock_net(sock->sk), peer_addr, dev_if)) {
+		/* local address connection is only allowed via loopback */
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
 	conn = rds_conn_create(sock_net(sock->sk),
 			       my_addr, peer_addr,
 			       &rds_tcp_transport, 0, GFP_KERNEL, dev_if);
-- 
2.30.2

[PATCH 5.4 19/84] scsi: bnx2fc: Return failure if io_req is already in ABTS processing

[Greg Kroah-Hartman]

From: Javed Hasan <jhasan@marvell.com>

[ Upstream commit 122c81c563b0c1c6b15ff76a9159af5ee1f21563 ]

Return failure from bnx2fc_eh_abort() if io_req is already in ABTS
processing.

Link: https://lore.kernel.org/r/20210519061416.19321-1-jhasan@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/bnx2fc/bnx2fc_io.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c
index 401743e2b429..a0e776414889 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_io.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
@@ -1219,6 +1219,7 @@ int bnx2fc_eh_abort(struct scsi_cmnd *sc_cmd)
 		   was a result from the ABTS request rather than the CLEANUP
 		   request */
 		set_bit(BNX2FC_FLAG_IO_CLEANUP,	&io_req->req_flags);
+		rc = FAILED;
 		goto done;
 	}
 
-- 
2.30.2

[PATCH 5.4 20/84] scsi: vmw_pvscsi: Set correct residual data length

[Greg Kroah-Hartman]

From: Matt Wang <wwentao@vmware.com>

[ Upstream commit e662502b3a782d479e67736a5a1c169a703d853a ]

Some commands (such as INQUIRY) may return less data than the initiator
requested. To avoid conducting useless information, set the right residual
count to make upper layer aware of this.

Before (INQUIRY PAGE 0xB0 with 128B buffer):

$ sg_raw -r 128 /dev/sda 12 01 B0 00 80 00
SCSI Status: Good

Received 128 bytes of data:
 00 00 b0 00 3c 01 00 00 00 00 00 00 00 00 00 00 00 ...<............
 10 00 00 00 00 00 01 00 00 00 00 00 40 00 00 08 00 ...........@....
 20 80 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 .......... .....
 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

After:

$ sg_raw -r 128 /dev/sda 12 01 B0 00 80 00
SCSI Status: Good

Received 64 bytes of data:
00 00 b0 00 3c 01 00 00 00 00 00 00 00 00 00 00 00 ...<............
10 00 00 00 00 00 01 00 00 00 00 00 40 00 00 08 00 ...........@....
20 80 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 .......... .....
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

[mkp: clarified description]

Link: https://lore.kernel.org/r/03C41093-B62E-43A2-913E-CFC92F1C70C3@vmware.com
Signed-off-by: Matt Wang <wwentao@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/vmw_pvscsi.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c
index 70008816c91f..0ac342b1deb9 100644
--- a/drivers/scsi/vmw_pvscsi.c
+++ b/drivers/scsi/vmw_pvscsi.c
@@ -574,7 +574,13 @@ static void pvscsi_complete_request(struct pvscsi_adapter *adapter,
 		case BTSTAT_SUCCESS:
 		case BTSTAT_LINKED_COMMAND_COMPLETED:
 		case BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG:
-			/* If everything went fine, let's move on..  */
+			/*
+			 * Commands like INQUIRY may transfer less data than
+			 * requested by the initiator via bufflen. Set residual
+			 * count to make upper layer aware of the actual amount
+			 * of data returned.
+			 */
+			scsi_set_resid(cmd, scsi_bufflen(cmd) - e->dataLen);
 			cmd->result = (DID_OK << 16);
 			break;
 
-- 
2.30.2

[PATCH 5.4 21/84] scsi: hisi_sas: Drop free_irq() of devm_request_irq() allocated irq

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 7907a021e4bbfa29cccacd2ba2dade894d9a7d4c ]

irqs allocated with devm_request_irq() should not be freed using
free_irq(). Doing so causes a dangling pointer and a subsequent double
free.

Link: https://lore.kernel.org/r/20210519130519.2661938-1-yangyingliang@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 723f51c822af..916447f3c607 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -3274,14 +3274,14 @@ hisi_sas_v3_destroy_irqs(struct pci_dev *pdev, struct hisi_hba *hisi_hba)
 {
 	int i;
 
-	free_irq(pci_irq_vector(pdev, 1), hisi_hba);
-	free_irq(pci_irq_vector(pdev, 2), hisi_hba);
-	free_irq(pci_irq_vector(pdev, 11), hisi_hba);
+	devm_free_irq(&pdev->dev, pci_irq_vector(pdev, 1), hisi_hba);
+	devm_free_irq(&pdev->dev, pci_irq_vector(pdev, 2), hisi_hba);
+	devm_free_irq(&pdev->dev, pci_irq_vector(pdev, 11), hisi_hba);
 	for (i = 0; i < hisi_hba->cq_nvecs; i++) {
 		struct hisi_sas_cq *cq = &hisi_hba->cq[i];
 		int nr = hisi_sas_intr_conv ? 16 : 16 + i;
 
-		free_irq(pci_irq_vector(pdev, nr), cq);
+		devm_free_irq(&pdev->dev, pci_irq_vector(pdev, nr), cq);
 	}
 	pci_free_irq_vectors(pdev);
 }
-- 
2.30.2

[PATCH 5.4 22/84] scsi: target: qla2xxx: Wait for stop_phase1 at WWN removal

[Greg Kroah-Hartman]

From: Dmitry Bogdanov <d.bogdanov@yadro.com>

[ Upstream commit 2ef7665dfd88830f15415ba007c7c9a46be7acd8 ]

Target de-configuration panics at high CPU load because TPGT and WWPN can
be removed on separate threads.

TPGT removal requests a reset HBA on a separate thread and waits for reset
complete (phase1). Due to high CPU load that HBA reset can be delayed for
some time.

WWPN removal does qlt_stop_phase2(). There it is believed that phase1 has
already completed and thus tgt.tgt_ops is subsequently cleared. However,
tgt.tgt_ops is needed to process incoming traffic and therefore this will
cause one of the following panics:

NIP qlt_reset+0x7c/0x220 [qla2xxx]
LR  qlt_reset+0x68/0x220 [qla2xxx]
Call Trace:
0xc000003ffff63a78 (unreliable)
qlt_handle_imm_notify+0x800/0x10c0 [qla2xxx]
qlt_24xx_atio_pkt+0x208/0x590 [qla2xxx]
qlt_24xx_process_atio_queue+0x33c/0x7a0 [qla2xxx]
qla83xx_msix_atio_q+0x54/0x90 [qla2xxx]

or

NIP qlt_24xx_handle_abts+0xd0/0x2a0 [qla2xxx]
LR  qlt_24xx_handle_abts+0xb4/0x2a0 [qla2xxx]
Call Trace:
qlt_24xx_handle_abts+0x90/0x2a0 [qla2xxx] (unreliable)
qlt_24xx_process_atio_queue+0x500/0x7a0 [qla2xxx]
qla83xx_msix_atio_q+0x54/0x90 [qla2xxx]

or

NIP qlt_create_sess+0x90/0x4e0 [qla2xxx]
LR  qla24xx_do_nack_work+0xa8/0x180 [qla2xxx]
Call Trace:
0xc0000000348fba30 (unreliable)
qla24xx_do_nack_work+0xa8/0x180 [qla2xxx]
qla2x00_do_work+0x674/0xbf0 [qla2xxx]
qla2x00_iocb_work_fn

The patch fixes the issue by serializing qlt_stop_phase1() and
qlt_stop_phase2() functions to make WWPN removal wait for phase1
completion.

Link: https://lore.kernel.org/r/20210415203554.27890-1-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_target.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 509539ec58e9..57068e2faef5 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -1559,10 +1559,12 @@ void qlt_stop_phase2(struct qla_tgt *tgt)
 		return;
 	}
 
+	mutex_lock(&tgt->ha->optrom_mutex);
 	mutex_lock(&vha->vha_tgt.tgt_mutex);
 	tgt->tgt_stop = 0;
 	tgt->tgt_stopped = 1;
 	mutex_unlock(&vha->vha_tgt.tgt_mutex);
+	mutex_unlock(&tgt->ha->optrom_mutex);
 
 	ql_dbg(ql_dbg_tgt_mgt, vha, 0xf00c, "Stop of tgt %p finished\n",
 	    tgt);
-- 
2.30.2

[PATCH 5.4 23/84] net: macb: ensure the device is available before accessing GEMGXL control registers

[Greg Kroah-Hartman]

From: Zong Li <zong.li@sifive.com>

[ Upstream commit 5eff1461a6dec84f04fafa9128548bad51d96147 ]

If runtime power menagement is enabled, the gigabit ethernet PLL would
be disabled after macb_probe(). During this period of time, the system
would hang up if we try to access GEMGXL control registers.

We can't put runtime_pm_get/runtime_pm_put/ there due to the issue of
sleep inside atomic section (7fa2955ff70ce453 ("sh_eth: Fix sleeping
function called from invalid context"). Add netif_running checking to
ensure the device is available before accessing GEMGXL device.

Changed in v2:
 - Use netif_running instead of its own flag

Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cadence/macb_main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 377668465535..ebd0853a6f31 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -2536,6 +2536,9 @@ static struct net_device_stats *gem_get_stats(struct macb *bp)
 	struct gem_stats *hwstat = &bp->hw_stats.gem;
 	struct net_device_stats *nstat = &bp->dev->stats;
 
+	if (!netif_running(bp->dev))
+		return nstat;
+
 	gem_update_stats(bp);
 
 	nstat->rx_errors = (hwstat->rx_frame_check_sequence_errors +
-- 
2.30.2

[PATCH 5.4 24/84] net: appletalk: cops: Fix data race in cops_probe1

[Greg Kroah-Hartman]

From: Saubhik Mukherjee <saubhik.mukherjee@gmail.com>

[ Upstream commit a4dd4fc6105e54393d637450a11d4cddb5fabc4f ]

In cops_probe1(), there is a write to dev->base_addr after requesting an
interrupt line and registering the interrupt handler cops_interrupt().
The handler might be called in parallel to handle an interrupt.
cops_interrupt() tries to read dev->base_addr leading to a potential
data race. So write to dev->base_addr before calling request_irq().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Saubhik Mukherjee <saubhik.mukherjee@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/appletalk/cops.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c
index b3c63d2f16aa..5c89c2eff891 100644
--- a/drivers/net/appletalk/cops.c
+++ b/drivers/net/appletalk/cops.c
@@ -325,6 +325,8 @@ static int __init cops_probe1(struct net_device *dev, int ioaddr)
 			break;
 	}
 
+	dev->base_addr = ioaddr;
+
 	/* Reserve any actual interrupt. */
 	if (dev->irq) {
 		retval = request_irq(dev->irq, cops_interrupt, 0, dev->name, dev);
@@ -332,8 +334,6 @@ static int __init cops_probe1(struct net_device *dev, int ioaddr)
 			goto err_out;
 	}
 
-	dev->base_addr = ioaddr;
-
         lp = netdev_priv(dev);
         spin_lock_init(&lp->lock);
 
-- 
2.30.2

[PATCH 5.4 25/84] net: dsa: microchip: enable phy errata workaround on 9567

[Greg Kroah-Hartman]

From: George McCollister <george.mccollister@gmail.com>

[ Upstream commit 8c42a49738f16af0061f9ae5c2f5a955f268d9e3 ]

Also enable phy errata workaround on 9567 since has the same errata as
the 9477 according to the manufacture's documentation.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/microchip/ksz9477.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 49ab1346dc3f..0370e71ed6e0 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -1520,6 +1520,7 @@ static const struct ksz_chip_data ksz9477_switch_chips[] = {
 		.num_statics = 16,
 		.cpu_ports = 0x7F,	/* can be configured as cpu port */
 		.port_cnt = 7,		/* total physical port count */
+		.phy_errata_9477 = true,
 	},
 };
 
-- 
2.30.2

[PATCH 5.4 26/84] nvme-fabrics: decode host pathing error for connect

[Greg Kroah-Hartman]

From: Hannes Reinecke <hare@suse.de>

[ Upstream commit 4d9442bf263ac45d495bb7ecf75009e59c0622b2 ]

Add an additional decoding for 'host pathing error' during connect.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/fabrics.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/nvme/host/fabrics.c b/drivers/nvme/host/fabrics.c
index 3bb71f177dfd..d884187d7706 100644
--- a/drivers/nvme/host/fabrics.c
+++ b/drivers/nvme/host/fabrics.c
@@ -336,6 +336,11 @@ static void nvmf_log_connect_error(struct nvme_ctrl *ctrl,
 			cmd->connect.recfmt);
 		break;
 
+	case NVME_SC_HOST_PATH_ERROR:
+		dev_err(ctrl->device,
+			"Connect command failed: host path error\n");
+		break;
+
 	default:
 		dev_err(ctrl->device,
 			"Connect command failed, error wo/DNR bit: %d\n",
-- 
2.30.2

[PATCH 5.4 27/84] MIPS: Fix kernel hang under FUNCTION_GRAPH_TRACER and PREEMPT_TRACER

[Greg Kroah-Hartman]

From: Tiezhu Yang <yangtiezhu@loongson.cn>

[ Upstream commit 78cf0eb926cb1abeff2106bae67752e032fe5f3e ]

When update the latest mainline kernel with the following three configs,
the kernel hangs during startup:

(1) CONFIG_FUNCTION_GRAPH_TRACER=y
(2) CONFIG_PREEMPT_TRACER=y
(3) CONFIG_FTRACE_STARTUP_TEST=y

When update the latest mainline kernel with the above two configs (1)
and (2), the kernel starts normally, but it still hangs when execute
the following command:

echo "function_graph" > /sys/kernel/debug/tracing/current_tracer

Without CONFIG_PREEMPT_TRACER=y, the above two kinds of kernel hangs
disappeared, so it seems that CONFIG_PREEMPT_TRACER has some influences
with function_graph tracer at the first glance.

I use ejtag to find out the epc address is related with preempt_enable()
in the file arch/mips/lib/mips-atomic.c, because function tracing can
trace the preempt_{enable,disable} calls that are traced, replace them
with preempt_{enable,disable}_notrace to prevent function tracing from
going into an infinite loop, and then it can fix the kernel hang issue.

By the way, it seems that this commit is a complement and improvement of
commit f93a1a00f2bd ("MIPS: Fix crash that occurs when function tracing
is enabled").

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/lib/mips-atomic.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/mips/lib/mips-atomic.c b/arch/mips/lib/mips-atomic.c
index 5530070e0d05..57497a26e79c 100644
--- a/arch/mips/lib/mips-atomic.c
+++ b/arch/mips/lib/mips-atomic.c
@@ -37,7 +37,7 @@
  */
 notrace void arch_local_irq_disable(void)
 {
-	preempt_disable();
+	preempt_disable_notrace();
 
 	__asm__ __volatile__(
 	"	.set	push						\n"
@@ -53,7 +53,7 @@ notrace void arch_local_irq_disable(void)
 	: /* no inputs */
 	: "memory");
 
-	preempt_enable();
+	preempt_enable_notrace();
 }
 EXPORT_SYMBOL(arch_local_irq_disable);
 
@@ -61,7 +61,7 @@ notrace unsigned long arch_local_irq_save(void)
 {
 	unsigned long flags;
 
-	preempt_disable();
+	preempt_disable_notrace();
 
 	__asm__ __volatile__(
 	"	.set	push						\n"
@@ -78,7 +78,7 @@ notrace unsigned long arch_local_irq_save(void)
 	: /* no inputs */
 	: "memory");
 
-	preempt_enable();
+	preempt_enable_notrace();
 
 	return flags;
 }
@@ -88,7 +88,7 @@ notrace void arch_local_irq_restore(unsigned long flags)
 {
 	unsigned long __tmp1;
 
-	preempt_disable();
+	preempt_disable_notrace();
 
 	__asm__ __volatile__(
 	"	.set	push						\n"
@@ -106,7 +106,7 @@ notrace void arch_local_irq_restore(unsigned long flags)
 	: "0" (flags)
 	: "memory");
 
-	preempt_enable();
+	preempt_enable_notrace();
 }
 EXPORT_SYMBOL(arch_local_irq_restore);
 
-- 
2.30.2

[PATCH 5.4 28/84] dm verity: fix require_signatures module_param permissions

[Greg Kroah-Hartman]

From: John Keeping <john@metanate.com>

[ Upstream commit 0c1f3193b1cdd21e7182f97dc9bca7d284d18a15 ]

The third parameter of module_param() is permissions for the sysfs node
but it looks like it is being used as the initial value of the parameter
here.  In fact, false here equates to omitting the file from sysfs and
does not affect the value of require_signatures.

Making the parameter writable is not simple because going from
false->true is fine but it should not be possible to remove the
requirement to verify a signature.  But it can be useful to inspect the
value of this parameter from userspace, so change the permissions to
make a read-only file in sysfs.

Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-verity-verify-sig.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/md/dm-verity-verify-sig.c b/drivers/md/dm-verity-verify-sig.c
index 614e43db93aa..919154ae4cae 100644
--- a/drivers/md/dm-verity-verify-sig.c
+++ b/drivers/md/dm-verity-verify-sig.c
@@ -15,7 +15,7 @@
 #define DM_VERITY_VERIFY_ERR(s) DM_VERITY_ROOT_HASH_VERIFICATION " " s
 
 static bool require_signatures;
-module_param(require_signatures, bool, false);
+module_param(require_signatures, bool, 0444);
 MODULE_PARM_DESC(require_signatures,
 		"Verify the roothash of dm-verity hash tree");
 
-- 
2.30.2

[PATCH 5.4 29/84] bnx2x: Fix missing error code in bnx2x_iov_init_one()

[Greg Kroah-Hartman]

From: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>

[ Upstream commit 65161c35554f7135e6656b3df1ce2c500ca0bdcf ]

Eliminate the follow smatch warning:

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1227
bnx2x_iov_init_one() warn: missing error code 'err'.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index 5097a44686b3..cf39623b828b 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -1245,8 +1245,10 @@ int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param,
 		goto failed;
 
 	/* SR-IOV capability was enabled but there are no VFs*/
-	if (iov->total == 0)
+	if (iov->total == 0) {
+		err = -EINVAL;
 		goto failed;
+	}
 
 	iov->nr_virtfn = min_t(u16, iov->total, num_vfs_param);
 
-- 
2.30.2

[PATCH 5.4 30/84] nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME

[Greg Kroah-Hartman]

From: Sagi Grimberg <sagi@grimberg.me>

[ Upstream commit 042a3eaad6daeabcfaf163aa44da8ea3cf8b5496 ]

We need to select NVME_CORE.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/Kconfig b/drivers/nvme/host/Kconfig
index 7b3f6555e67b..cf0ae71c489e 100644
--- a/drivers/nvme/host/Kconfig
+++ b/drivers/nvme/host/Kconfig
@@ -62,7 +62,8 @@ config NVME_FC
 config NVME_TCP
 	tristate "NVM Express over Fabrics TCP host driver"
 	depends on INET
-	depends on BLK_DEV_NVME
+	depends on BLOCK
+	select NVME_CORE
 	select NVME_FABRICS
 	select CRYPTO
 	select CRYPTO_CRC32C
-- 
2.30.2

[PATCH 5.4 31/84] powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers

[Greg Kroah-Hartman]

From: Chris Packham <chris.packham@alliedtelesis.co.nz>

[ Upstream commit 7adc7b225cddcfd0f346d10144fd7a3d3d9f9ea7 ]

The i2c controllers on the P2040/P2041 have an erratum where the
documented scheme for i2c bus recovery will not work (A-004447). A
different mechanism is needed which is documented in the P2040 Chip
Errata Rev Q (latest available at the time of writing).

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
index 872e4485dc3f..ddc018d42252 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -371,7 +371,23 @@
 	};
 
 /include/ "qoriq-i2c-0.dtsi"
+	i2c@118000 {
+		fsl,i2c-erratum-a004447;
+	};
+
+	i2c@118100 {
+		fsl,i2c-erratum-a004447;
+	};
+
 /include/ "qoriq-i2c-1.dtsi"
+	i2c@119000 {
+		fsl,i2c-erratum-a004447;
+	};
+
+	i2c@119100 {
+		fsl,i2c-erratum-a004447;
+	};
+
 /include/ "qoriq-duart-0.dtsi"
 /include/ "qoriq-duart-1.dtsi"
 /include/ "qoriq-gpio-0.dtsi"
-- 
2.30.2

[PATCH 5.4 32/84] powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers

[Greg Kroah-Hartman]

From: Chris Packham <chris.packham@alliedtelesis.co.nz>

[ Upstream commit 19ae697a1e4edf1d755b413e3aa38da65e2db23b ]

The i2c controllers on the P1010 have an erratum where the documented
scheme for i2c bus recovery will not work (A-004447). A different
mechanism is needed which is documented in the P1010 Chip Errata Rev L.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/boot/dts/fsl/p1010si-post.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
index 1b4aafc1f6a2..9716a0484ecf 100644
--- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
@@ -122,7 +122,15 @@
 	};
 
 /include/ "pq3-i2c-0.dtsi"
+	i2c@3000 {
+		fsl,i2c-erratum-a004447;
+	};
+
 /include/ "pq3-i2c-1.dtsi"
+	i2c@3100 {
+		fsl,i2c-erratum-a004447;
+	};
+
 /include/ "pq3-duart-0.dtsi"
 /include/ "pq3-espi-0.dtsi"
 	spi0: spi@7000 {
-- 
2.30.2

[PATCH 5.4 33/84] spi: Dont have controller clean up spi device before driver unbind

[Greg Kroah-Hartman]

From: Saravana Kannan <saravanak@google.com>

[ Upstream commit 27e7db56cf3dffd302bd7ddfacb1d405cf671a2a ]

When a spi device is unregistered and triggers a driver unbind, the
driver might need to access the spi device. So, don't have the
controller clean up the spi device before the driver is unbound. Clean
up the spi device after the driver is unbound.

Fixes: c7299fea6769 ("spi: Fix spi device unregister flow")
Reported-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210505164734.175546-1-saravanak@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index c4b80cf825b8..f8f3434d5ab1 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -708,15 +708,15 @@ void spi_unregister_device(struct spi_device *spi)
 	if (!spi)
 		return;
 
-	spi_cleanup(spi);
-
 	if (spi->dev.of_node) {
 		of_node_clear_flag(spi->dev.of_node, OF_POPULATED);
 		of_node_put(spi->dev.of_node);
 	}
 	if (ACPI_COMPANION(&spi->dev))
 		acpi_device_clear_enumerated(ACPI_COMPANION(&spi->dev));
-	device_unregister(&spi->dev);
+	device_del(&spi->dev);
+	spi_cleanup(spi);
+	put_device(&spi->dev);
 }
 EXPORT_SYMBOL_GPL(spi_unregister_device);
 
-- 
2.30.2

[PATCH 5.4 34/84] spi: Cleanup on failure of initial setup

[Greg Kroah-Hartman]

From: Lukas Wunner <lukas@wunner.de>

[ Upstream commit 2ec6f20b33eb4f62ab90bdcd620436c883ec3af6 ]

Commit c7299fea6769 ("spi: Fix spi device unregister flow") changed the
SPI core's behavior if the ->setup() hook returns an error upon adding
an spi_device:  Before, the ->cleanup() hook was invoked to free any
allocations that were made by ->setup().  With the commit, that's no
longer the case, so the ->setup() hook is expected to free the
allocations itself.

I've identified 5 drivers which depend on the old behavior and am fixing
them up hereinafter: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c
spi-omap2-mcspi.c spi-pxa2xx.c

Importantly, ->setup() is not only invoked on spi_device *addition*:
It may subsequently be called to *change* SPI parameters.  If changing
these SPI parameters fails, freeing memory allocations would be wrong.
That should only be done if the spi_device is finally destroyed.
I am therefore using a bool "initial_setup" in 4 of the affected drivers
to differentiate between the invocation on *adding* the spi_device and
any subsequent invocations: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c
spi-omap2-mcspi.c

In spi-pxa2xx.c, it seems the ->setup() hook can only fail on spi_device
addition, not any subsequent calls.  It therefore doesn't need the bool.

It's worth noting that 5 other drivers already perform a cleanup if the
->setup() hook fails.  Before c7299fea6769, they caused a double-free
if ->setup() failed on spi_device addition.  Since the commit, they're
fine.  These drivers are: spi-mpc512x-psc.c spi-pl022.c spi-s3c64xx.c
spi-st-ssc4.c spi-tegra114.c

(spi-pxa2xx.c also already performs a cleanup, but only in one of
several error paths.)

Fixes: c7299fea6769 ("spi: Fix spi device unregister flow")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Saravana Kannan <saravanak@google.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # pxa2xx
Link: https://lore.kernel.org/r/f76a0599469f265b69c371538794101fa37b5536.1622149321.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-bitbang.c     | 18 ++++++++++++----
 drivers/spi/spi-fsl-spi.c     |  4 ++++
 drivers/spi/spi-omap-uwire.c  |  9 +++++++-
 drivers/spi/spi-omap2-mcspi.c | 39 +++++++++++++++++++++--------------
 drivers/spi/spi-pxa2xx.c      |  9 +++++++-
 5 files changed, 57 insertions(+), 22 deletions(-)

diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c
index d84e22dd6f9f..7d61a3b71ee5 100644
--- a/drivers/spi/spi-bitbang.c
+++ b/drivers/spi/spi-bitbang.c
@@ -181,6 +181,8 @@ int spi_bitbang_setup(struct spi_device *spi)
 {
 	struct spi_bitbang_cs	*cs = spi->controller_state;
 	struct spi_bitbang	*bitbang;
+	bool			initial_setup = false;
+	int			retval;
 
 	bitbang = spi_master_get_devdata(spi->master);
 
@@ -189,22 +191,30 @@ int spi_bitbang_setup(struct spi_device *spi)
 		if (!cs)
 			return -ENOMEM;
 		spi->controller_state = cs;
+		initial_setup = true;
 	}
 
 	/* per-word shift register access, in hardware or bitbanging */
 	cs->txrx_word = bitbang->txrx_word[spi->mode & (SPI_CPOL|SPI_CPHA)];
-	if (!cs->txrx_word)
-		return -EINVAL;
+	if (!cs->txrx_word) {
+		retval = -EINVAL;
+		goto err_free;
+	}
 
 	if (bitbang->setup_transfer) {
-		int retval = bitbang->setup_transfer(spi, NULL);
+		retval = bitbang->setup_transfer(spi, NULL);
 		if (retval < 0)
-			return retval;
+			goto err_free;
 	}
 
 	dev_dbg(&spi->dev, "%s, %u nsec/bit\n", __func__, 2 * cs->nsecs);
 
 	return 0;
+
+err_free:
+	if (initial_setup)
+		kfree(cs);
+	return retval;
 }
 EXPORT_SYMBOL_GPL(spi_bitbang_setup);
 
diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index 18a93a2854d8..02b999d48ca1 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -442,6 +442,7 @@ static int fsl_spi_setup(struct spi_device *spi)
 {
 	struct mpc8xxx_spi *mpc8xxx_spi;
 	struct fsl_spi_reg *reg_base;
+	bool initial_setup = false;
 	int retval;
 	u32 hw_mode;
 	struct spi_mpc8xxx_cs *cs = spi_get_ctldata(spi);
@@ -454,6 +455,7 @@ static int fsl_spi_setup(struct spi_device *spi)
 		if (!cs)
 			return -ENOMEM;
 		spi_set_ctldata(spi, cs);
+		initial_setup = true;
 	}
 	mpc8xxx_spi = spi_master_get_devdata(spi->master);
 
@@ -477,6 +479,8 @@ static int fsl_spi_setup(struct spi_device *spi)
 	retval = fsl_spi_setup_transfer(spi, NULL);
 	if (retval < 0) {
 		cs->hw_mode = hw_mode; /* Restore settings */
+		if (initial_setup)
+			kfree(cs);
 		return retval;
 	}
 
diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c
index ce8dbdbce312..85ee907e28f9 100644
--- a/drivers/spi/spi-omap-uwire.c
+++ b/drivers/spi/spi-omap-uwire.c
@@ -424,15 +424,22 @@ done:
 static int uwire_setup(struct spi_device *spi)
 {
 	struct uwire_state *ust = spi->controller_state;
+	bool initial_setup = false;
+	int status;
 
 	if (ust == NULL) {
 		ust = kzalloc(sizeof(*ust), GFP_KERNEL);
 		if (ust == NULL)
 			return -ENOMEM;
 		spi->controller_state = ust;
+		initial_setup = true;
 	}
 
-	return uwire_setup_transfer(spi, NULL);
+	status = uwire_setup_transfer(spi, NULL);
+	if (status && initial_setup)
+		kfree(ust);
+
+	return status;
 }
 
 static void uwire_cleanup(struct spi_device *spi)
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 7646b4b56bed..38f4be209234 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -1043,8 +1043,25 @@ static void omap2_mcspi_release_dma(struct spi_master *master)
 	}
 }
 
+static void omap2_mcspi_cleanup(struct spi_device *spi)
+{
+	struct omap2_mcspi_cs	*cs;
+
+	if (spi->controller_state) {
+		/* Unlink controller state from context save list */
+		cs = spi->controller_state;
+		list_del(&cs->node);
+
+		kfree(cs);
+	}
+
+	if (gpio_is_valid(spi->cs_gpio))
+		gpio_free(spi->cs_gpio);
+}
+
 static int omap2_mcspi_setup(struct spi_device *spi)
 {
+	bool			initial_setup = false;
 	int			ret;
 	struct omap2_mcspi	*mcspi = spi_master_get_devdata(spi->master);
 	struct omap2_mcspi_regs	*ctx = &mcspi->ctx;
@@ -1062,6 +1079,7 @@ static int omap2_mcspi_setup(struct spi_device *spi)
 		spi->controller_state = cs;
 		/* Link this to context save list */
 		list_add_tail(&cs->node, &ctx->cs);
+		initial_setup = true;
 
 		if (gpio_is_valid(spi->cs_gpio)) {
 			ret = gpio_request(spi->cs_gpio, dev_name(&spi->dev));
@@ -1077,33 +1095,22 @@ static int omap2_mcspi_setup(struct spi_device *spi)
 	ret = pm_runtime_get_sync(mcspi->dev);
 	if (ret < 0) {
 		pm_runtime_put_noidle(mcspi->dev);
+		if (initial_setup)
+			omap2_mcspi_cleanup(spi);
 
 		return ret;
 	}
 
 	ret = omap2_mcspi_setup_transfer(spi, NULL);
+	if (ret && initial_setup)
+		omap2_mcspi_cleanup(spi);
+
 	pm_runtime_mark_last_busy(mcspi->dev);
 	pm_runtime_put_autosuspend(mcspi->dev);
 
 	return ret;
 }
 
-static void omap2_mcspi_cleanup(struct spi_device *spi)
-{
-	struct omap2_mcspi_cs	*cs;
-
-	if (spi->controller_state) {
-		/* Unlink controller state from context save list */
-		cs = spi->controller_state;
-		list_del(&cs->node);
-
-		kfree(cs);
-	}
-
-	if (gpio_is_valid(spi->cs_gpio))
-		gpio_free(spi->cs_gpio);
-}
-
 static irqreturn_t omap2_mcspi_irq_handler(int irq, void *data)
 {
 	struct omap2_mcspi *mcspi = data;
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index f5a10a94f156..e32d51f27944 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1241,6 +1241,8 @@ static int setup_cs(struct spi_device *spi, struct chip_data *chip,
 		chip->gpio_cs_inverted = spi->mode & SPI_CS_HIGH;
 
 		err = gpiod_direction_output(gpiod, !chip->gpio_cs_inverted);
+		if (err)
+			gpiod_put(chip->gpiod_cs);
 	}
 
 	return err;
@@ -1254,6 +1256,7 @@ static int setup(struct spi_device *spi)
 	struct driver_data *drv_data =
 		spi_controller_get_devdata(spi->controller);
 	uint tx_thres, tx_hi_thres, rx_thres;
+	int err;
 
 	switch (drv_data->ssp_type) {
 	case QUARK_X1000_SSP:
@@ -1400,7 +1403,11 @@ static int setup(struct spi_device *spi)
 	if (drv_data->ssp_type == CE4100_SSP)
 		return 0;
 
-	return setup_cs(spi, chip, chip_info);
+	err = setup_cs(spi, chip, chip_info);
+	if (err)
+		kfree(chip);
+
+	return err;
 }
 
 static void cleanup(struct spi_device *spi)
-- 
2.30.2

[PATCH 5.4 35/84] i2c: mpc: Make use of i2c_recover_bus()

[Greg Kroah-Hartman]

From: Chris Packham <chris.packham@alliedtelesis.co.nz>

[ Upstream commit 65171b2df15eb7545431d75c2729b5062da89b43 ]

Move the existing calls of mpc_i2c_fixup() to a recovery function
registered via bus_recovery_info. This makes it more obvious that
recovery is supported and allows for a future where recovery is
triggered by the i2c core.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-mpc.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index d94f05c8b8b7..6a0d55e9e8e3 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -586,7 +586,7 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 			if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) {
 				writeb(status & ~CSR_MAL,
 				       i2c->base + MPC_I2C_SR);
-				mpc_i2c_fixup(i2c);
+				i2c_recover_bus(&i2c->adap);
 			}
 			return -EIO;
 		}
@@ -622,7 +622,7 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 			if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) {
 				writeb(status & ~CSR_MAL,
 				       i2c->base + MPC_I2C_SR);
-				mpc_i2c_fixup(i2c);
+				i2c_recover_bus(&i2c->adap);
 			}
 			return -EIO;
 		}
@@ -637,6 +637,15 @@ static u32 mpc_functionality(struct i2c_adapter *adap)
 	  | I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL;
 }
 
+static int fsl_i2c_bus_recovery(struct i2c_adapter *adap)
+{
+	struct mpc_i2c *i2c = i2c_get_adapdata(adap);
+
+	mpc_i2c_fixup(i2c);
+
+	return 0;
+}
+
 static const struct i2c_algorithm mpc_algo = {
 	.master_xfer = mpc_xfer,
 	.functionality = mpc_functionality,
@@ -648,6 +657,10 @@ static struct i2c_adapter mpc_ops = {
 	.timeout = HZ,
 };
 
+static struct i2c_bus_recovery_info fsl_i2c_recovery_info = {
+	.recover_bus = fsl_i2c_bus_recovery,
+};
+
 static const struct of_device_id mpc_i2c_of_match[];
 static int fsl_i2c_probe(struct platform_device *op)
 {
@@ -740,6 +753,7 @@ static int fsl_i2c_probe(struct platform_device *op)
 	i2c_set_adapdata(&i2c->adap, i2c);
 	i2c->adap.dev.parent = &op->dev;
 	i2c->adap.dev.of_node = of_node_get(op->dev.of_node);
+	i2c->adap.bus_recovery_info = &fsl_i2c_recovery_info;
 
 	result = i2c_add_adapter(&i2c->adap);
 	if (result < 0)
-- 
2.30.2

[PATCH 5.4 36/84] i2c: mpc: implement erratum A-004447 workaround

[Greg Kroah-Hartman]

From: Chris Packham <chris.packham@alliedtelesis.co.nz>

[ Upstream commit 8f0cdec8b5fd94135d643662506ee94ae9e98785 ]

The P2040/P2041 has an erratum where the normal i2c recovery mechanism
does not work. Implement the alternative recovery mechanism documented
in the P2040 Chip Errata Rev Q.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-mpc.c | 79 +++++++++++++++++++++++++++++++++++-
 1 file changed, 78 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 6a0d55e9e8e3..af349661fd76 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -23,6 +23,7 @@
 
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/fsl_devices.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
@@ -49,6 +50,7 @@
 #define CCR_MTX  0x10
 #define CCR_TXAK 0x08
 #define CCR_RSTA 0x04
+#define CCR_RSVD 0x02
 
 #define CSR_MCF  0x80
 #define CSR_MAAS 0x40
@@ -70,6 +72,7 @@ struct mpc_i2c {
 	u8 fdr, dfsrr;
 #endif
 	struct clk *clk_per;
+	bool has_errata_A004447;
 };
 
 struct mpc_i2c_divider {
@@ -176,6 +179,75 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
 	return 0;
 }
 
+static int i2c_mpc_wait_sr(struct mpc_i2c *i2c, int mask)
+{
+	void __iomem *addr = i2c->base + MPC_I2C_SR;
+	u8 val;
+
+	return readb_poll_timeout(addr, val, val & mask, 0, 100);
+}
+
+/*
+ * Workaround for Erratum A004447. From the P2040CE Rev Q
+ *
+ * 1.  Set up the frequency divider and sampling rate.
+ * 2.  I2CCR - a0h
+ * 3.  Poll for I2CSR[MBB] to get set.
+ * 4.  If I2CSR[MAL] is set (an indication that SDA is stuck low), then go to
+ *     step 5. If MAL is not set, then go to step 13.
+ * 5.  I2CCR - 00h
+ * 6.  I2CCR - 22h
+ * 7.  I2CCR - a2h
+ * 8.  Poll for I2CSR[MBB] to get set.
+ * 9.  Issue read to I2CDR.
+ * 10. Poll for I2CSR[MIF] to be set.
+ * 11. I2CCR - 82h
+ * 12. Workaround complete. Skip the next steps.
+ * 13. Issue read to I2CDR.
+ * 14. Poll for I2CSR[MIF] to be set.
+ * 15. I2CCR - 80h
+ */
+static void mpc_i2c_fixup_A004447(struct mpc_i2c *i2c)
+{
+	int ret;
+	u32 val;
+
+	writeccr(i2c, CCR_MEN | CCR_MSTA);
+	ret = i2c_mpc_wait_sr(i2c, CSR_MBB);
+	if (ret) {
+		dev_err(i2c->dev, "timeout waiting for CSR_MBB\n");
+		return;
+	}
+
+	val = readb(i2c->base + MPC_I2C_SR);
+
+	if (val & CSR_MAL) {
+		writeccr(i2c, 0x00);
+		writeccr(i2c, CCR_MSTA | CCR_RSVD);
+		writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSVD);
+		ret = i2c_mpc_wait_sr(i2c, CSR_MBB);
+		if (ret) {
+			dev_err(i2c->dev, "timeout waiting for CSR_MBB\n");
+			return;
+		}
+		val = readb(i2c->base + MPC_I2C_DR);
+		ret = i2c_mpc_wait_sr(i2c, CSR_MIF);
+		if (ret) {
+			dev_err(i2c->dev, "timeout waiting for CSR_MIF\n");
+			return;
+		}
+		writeccr(i2c, CCR_MEN | CCR_RSVD);
+	} else {
+		val = readb(i2c->base + MPC_I2C_DR);
+		ret = i2c_mpc_wait_sr(i2c, CSR_MIF);
+		if (ret) {
+			dev_err(i2c->dev, "timeout waiting for CSR_MIF\n");
+			return;
+		}
+		writeccr(i2c, CCR_MEN);
+	}
+}
+
 #if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x)
 static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
 	{20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
@@ -641,7 +713,10 @@ static int fsl_i2c_bus_recovery(struct i2c_adapter *adap)
 {
 	struct mpc_i2c *i2c = i2c_get_adapdata(adap);
 
-	mpc_i2c_fixup(i2c);
+	if (i2c->has_errata_A004447)
+		mpc_i2c_fixup_A004447(i2c);
+	else
+		mpc_i2c_fixup(i2c);
 
 	return 0;
 }
@@ -745,6 +820,8 @@ static int fsl_i2c_probe(struct platform_device *op)
 	dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ);
 
 	platform_set_drvdata(op, i2c);
+	if (of_property_read_bool(op->dev.of_node, "fsl,i2c-erratum-a004447"))
+		i2c->has_errata_A004447 = true;
 
 	i2c->adap = mpc_ops;
 	of_address_to_resource(op->dev.of_node, 0, &res);
-- 
2.30.2

[PATCH 5.4 37/84] x86/boot: Add .text.* to setup.ld

[Greg Kroah-Hartman]

From: Arvind Sankar <nivedita@alum.mit.edu>

commit 2e7a858ba843d2e6ceab1ba996805411de51b340 upstream.

GCC puts the main function into .text.startup when compiled with -Os (or
-O2). This results in arch/x86/boot/main.c having a .text.startup
section which is currently not included explicitly in the linker script
setup.ld in the same directory.

The BFD linker places this orphan section immediately after .text, so
this still works. However, LLD git, since [1], is choosing to place it
immediately after the .bstext section instead (this is the first code
section). This plays havoc with the section layout that setup.elf
requires to create the setup header, for eg on 64-bit:

    LD      arch/x86/boot/setup.elf
  ld.lld: error: section .text.startup file range overlaps with .header
  >>> .text.startup range is [0x200040, 0x2001FE]
  >>> .header range is [0x2001EF, 0x20026B]

  ld.lld: error: section .header file range overlaps with .bsdata
  >>> .header range is [0x2001EF, 0x20026B]
  >>> .bsdata range is [0x2001FF, 0x200398]

  ld.lld: error: section .bsdata file range overlaps with .entrytext
  >>> .bsdata range is [0x2001FF, 0x200398]
  >>> .entrytext range is [0x20026C, 0x2002D3]

  ld.lld: error: section .text.startup virtual address range overlaps
  with .header
  >>> .text.startup range is [0x40, 0x1FE]
  >>> .header range is [0x1EF, 0x26B]

  ld.lld: error: section .header virtual address range overlaps with
  .bsdata
  >>> .header range is [0x1EF, 0x26B]
  >>> .bsdata range is [0x1FF, 0x398]

  ld.lld: error: section .bsdata virtual address range overlaps with
  .entrytext
  >>> .bsdata range is [0x1FF, 0x398]
  >>> .entrytext range is [0x26C, 0x2D3]

  ld.lld: error: section .text.startup load address range overlaps with
  .header
  >>> .text.startup range is [0x40, 0x1FE]
  >>> .header range is [0x1EF, 0x26B]

  ld.lld: error: section .header load address range overlaps with
  .bsdata
  >>> .header range is [0x1EF, 0x26B]
  >>> .bsdata range is [0x1FF, 0x398]

  ld.lld: error: section .bsdata load address range overlaps with
  .entrytext
  >>> .bsdata range is [0x1FF, 0x398]
  >>> .entrytext range is [0x26C, 0x2D3]

Add .text.* to the .text output section to fix this, and also prevent
any future surprises if the compiler decides to create other such
sections.

[1] https://reviews.llvm.org/D75225

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20200731230820.1742553-5-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/boot/setup.ld |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/boot/setup.ld
+++ b/arch/x86/boot/setup.ld
@@ -20,7 +20,7 @@ SECTIONS
 	.initdata	: { *(.initdata) }
 	__end_init = .;
 
-	.text		: { *(.text) }
+	.text		: { *(.text .text.*) }
 	.text32		: { *(.text32) }
 
 	. = ALIGN(16);

[PATCH 5.4 38/84] spi: bcm2835: Fix out-of-bounds access with more than 4 slaves

[Greg Kroah-Hartman]

From: Lukas Wunner <lukas@wunner.de>

commit 13817d466eb8713a1ffd254f537402f091d48444 upstream.

Commit 571e31fa60b3 ("spi: bcm2835: Cache CS register value for
->prepare_message()") limited the number of slaves to 3 at compile-time.
The limitation was necessitated by a statically-sized array prepare_cs[]
in the driver private data which contains a per-slave register value.

The commit sought to enforce the limitation at run-time by setting the
controller's num_chipselect to 3:  Slaves with a higher chipselect are
rejected by spi_add_device().

However the commit neglected that num_chipselect only limits the number
of *native* chipselects.  If GPIO chipselects are specified in the
device tree for more than 3 slaves, num_chipselect is silently raised by
of_spi_get_gpio_numbers() and the result are out-of-bounds accesses to
the statically-sized array prepare_cs[].

As a bandaid fix which is backportable to stable, raise the number of
allowed slaves to 24 (which "ought to be enough for anybody"), enforce
the limitation on slave ->setup and revert num_chipselect to 3 (which is
the number of native chipselects supported by the controller).
An upcoming for-next commit will allow an arbitrary number of slaves.

Fixes: 571e31fa60b3 ("spi: bcm2835: Cache CS register value for ->prepare_message()")
Reported-by: Joe Burmeister <joe.burmeister@devtank.co.uk>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v5.4+
Cc: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/75854affc1923309fde05e47494263bde73e5592.1621703210.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/spi/spi-bcm2835.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -68,7 +68,7 @@
 #define BCM2835_SPI_FIFO_SIZE		64
 #define BCM2835_SPI_FIFO_SIZE_3_4	48
 #define BCM2835_SPI_DMA_MIN_LENGTH	96
-#define BCM2835_SPI_NUM_CS		3   /* raise as necessary */
+#define BCM2835_SPI_NUM_CS		24  /* raise as necessary */
 #define BCM2835_SPI_MODE_BITS	(SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
 				| SPI_NO_CS | SPI_3WIRE)
 
@@ -1181,6 +1181,12 @@ static int bcm2835_spi_setup(struct spi_
 	struct gpio_chip *chip;
 	u32 cs;
 
+	if (spi->chip_select >= BCM2835_SPI_NUM_CS) {
+		dev_err(&spi->dev, "only %d chip-selects supported\n",
+			BCM2835_SPI_NUM_CS - 1);
+		return -EINVAL;
+	}
+
 	/*
 	 * Precalculate SPI slave's CS register value for ->prepare_message():
 	 * The driver always uses software-controlled GPIO chip select, hence
@@ -1274,7 +1280,7 @@ static int bcm2835_spi_probe(struct plat
 	ctlr->use_gpio_descriptors = true;
 	ctlr->mode_bits = BCM2835_SPI_MODE_BITS;
 	ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
-	ctlr->num_chipselect = BCM2835_SPI_NUM_CS;
+	ctlr->num_chipselect = 3;
 	ctlr->setup = bcm2835_spi_setup;
 	ctlr->transfer_one = bcm2835_spi_transfer_one;
 	ctlr->handle_err = bcm2835_spi_handle_err;

[PATCH 5.4 39/84] drm: Fix use-after-free read in drm_getunique()

[Greg Kroah-Hartman]

From: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>

commit b436acd1cf7fac0ba987abd22955d98025c80c2b upstream.

There is a time-of-check-to-time-of-use error in drm_getunique() due
to retrieving file_priv->master prior to locking the device's master
mutex.

An example can be seen in the crash report of the use-after-free error
found by Syzbot:
https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803

In the report, the master pointer was used after being freed. This is
because another process had acquired the device's master mutex in
drm_setmaster_ioctl(), then overwrote fpriv->master in
drm_new_set_master(). The old value of fpriv->master was subsequently
freed before the mutex was unlocked.

To fix this, we lock the device's master mutex before retrieving the
pointer from from fpriv->master. This patch passes the Syzbot
reproducer test.

Reported-by: syzbot+c3a706cec1ea99e1c693@syzkaller.appspotmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608110436.239583-1-desmondcheongzx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/drm_ioctl.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/drm_ioctl.c
+++ b/drivers/gpu/drm/drm_ioctl.c
@@ -118,17 +118,18 @@ int drm_getunique(struct drm_device *dev
 		  struct drm_file *file_priv)
 {
 	struct drm_unique *u = data;
-	struct drm_master *master = file_priv->master;
+	struct drm_master *master;
 
-	mutex_lock(&master->dev->master_mutex);
+	mutex_lock(&dev->master_mutex);
+	master = file_priv->master;
 	if (u->unique_len >= master->unique_len) {
 		if (copy_to_user(u->unique, master->unique, master->unique_len)) {
-			mutex_unlock(&master->dev->master_mutex);
+			mutex_unlock(&dev->master_mutex);
 			return -EFAULT;
 		}
 	}
 	u->unique_len = master->unique_len;
-	mutex_unlock(&master->dev->master_mutex);
+	mutex_unlock(&dev->master_mutex);
 
 	return 0;
 }

[PATCH 5.4 40/84] drm: Lock pointer access in drm_master_release()

[Greg Kroah-Hartman]

From: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>

commit c336a5ee984708db4826ef9e47d184e638e29717 upstream.

This patch eliminates the following smatch warning:
drivers/gpu/drm/drm_auth.c:320 drm_master_release() warn: unlocked access 'master' (line 318) expected lock '&dev->master_mutex'

The 'file_priv->master' field should be protected by the mutex lock to
'&dev->master_mutex'. This is because other processes can concurrently
modify this field and free the current 'file_priv->master'
pointer. This could result in a use-after-free error when 'master' is
dereferenced in subsequent function calls to
'drm_legacy_lock_master_cleanup()' or to 'drm_lease_revoke()'.

An example of a scenario that would produce this error can be seen
from a similar bug in 'drm_getunique()' that was reported by Syzbot:
https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803

In the Syzbot report, another process concurrently acquired the
device's master mutex in 'drm_setmaster_ioctl()', then overwrote
'fpriv->master' in 'drm_new_set_master()'. The old value of
'fpriv->master' was subsequently freed before the mutex was unlocked.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609092119.173590-1-desmondcheongzx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/drm_auth.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/drm_auth.c
+++ b/drivers/gpu/drm/drm_auth.c
@@ -268,9 +268,10 @@ int drm_master_open(struct drm_file *fil
 void drm_master_release(struct drm_file *file_priv)
 {
 	struct drm_device *dev = file_priv->minor->dev;
-	struct drm_master *master = file_priv->master;
+	struct drm_master *master;
 
 	mutex_lock(&dev->master_mutex);
+	master = file_priv->master;
 	if (file_priv->magic)
 		idr_remove(&file_priv->master->magic_map, file_priv->magic);
 

[PATCH 5.4 41/84] kvm: avoid speculation-based attacks from out-of-range memslot accesses

[Greg Kroah-Hartman]

From: Paolo Bonzini <pbonzini@redhat.com>

commit da27a83fd6cc7780fea190e1f5c19e87019da65c upstream.

KVM's mechanism for accessing guest memory translates a guest physical
address (gpa) to a host virtual address using the right-shifted gpa
(also known as gfn) and a struct kvm_memory_slot.  The translation is
performed in __gfn_to_hva_memslot using the following formula:

      hva = slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE

It is expected that gfn falls within the boundaries of the guest's
physical memory.  However, a guest can access invalid physical addresses
in such a way that the gfn is invalid.

__gfn_to_hva_memslot is called from kvm_vcpu_gfn_to_hva_prot, which first
retrieves a memslot through __gfn_to_memslot.  While __gfn_to_memslot
does check that the gfn falls within the boundaries of the guest's
physical memory or not, a CPU can speculate the result of the check and
continue execution speculatively using an illegal gfn. The speculation
can result in calculating an out-of-bounds hva.  If the resulting host
virtual address is used to load another guest physical address, this
is effectively a Spectre gadget consisting of two consecutive reads,
the second of which is data dependent on the first.

Right now it's not clear if there are any cases in which this is
exploitable.  One interesting case was reported by the original author
of this patch, and involves visiting guest page tables on x86.  Right
now these are not vulnerable because the hva read goes through get_user(),
which contains an LFENCE speculation barrier.  However, there are
patches in progress for x86 uaccess.h to mask kernel addresses instead of
using LFENCE; once these land, a guest could use speculation to read
from the VMM's ring 3 address space.  Other architectures such as ARM
already use the address masking method, and would be susceptible to
this same kind of data-dependent access gadgets.  Therefore, this patch
proactively protects from these attacks by masking out-of-bounds gfns
in __gfn_to_hva_memslot, which blocks speculation of invalid hvas.

Sean Christopherson noted that this patch does not cover
kvm_read_guest_offset_cached.  This however is limited to a few bytes
past the end of the cache, and therefore it is unlikely to be useful in
the context of building a chain of data dependent accesses.

Reported-by: Artemiy Margaritov <artemiy.margaritov@gmail.com>
Co-developed-by: Artemiy Margaritov <artemiy.margaritov@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/kvm_host.h |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -1045,7 +1045,15 @@ __gfn_to_memslot(struct kvm_memslots *sl
 static inline unsigned long
 __gfn_to_hva_memslot(struct kvm_memory_slot *slot, gfn_t gfn)
 {
-	return slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE;
+	/*
+	 * The index was checked originally in search_memslots.  To avoid
+	 * that a malicious guest builds a Spectre gadget out of e.g. page
+	 * table walks, do not let the processor speculate loads outside
+	 * the guest's registered memslots.
+	 */
+	unsigned long offset = array_index_nospec(gfn - slot->base_gfn,
+						  slot->npages);
+	return slot->userspace_addr + offset * PAGE_SIZE;
 }
 
 static inline int memslot_id(struct kvm *kvm, gfn_t gfn)

[PATCH 5.4 42/84] staging: rtl8723bs: Fix uninitialized variables

[Greg Kroah-Hartman]

From: Wenli Looi <wlooi@ucalgary.ca>

commit 43c85d770db80cb135f576f8fde6ff1a08e707a4 upstream.

The sinfo.pertid and sinfo.generation variables are not initialized and
it causes a crash when we use this as a wireless access point.

[  456.873025] ------------[ cut here ]------------
[  456.878198] kernel BUG at mm/slub.c:3968!
[  456.882680] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM

  [ snip ]

[  457.271004] Backtrace:
[  457.273733] [<c02b7ee4>] (kfree) from [<c0e2a470>] (nl80211_send_station+0x954/0xfc4)
[  457.282481]  r9:eccca0c0 r8:e8edfec0 r7:00000000 r6:00000011 r5:e80a9480 r4:e8edfe00
[  457.291132] [<c0e29b1c>] (nl80211_send_station) from [<c0e2b18c>] (cfg80211_new_sta+0x90/0x1cc)
[  457.300850]  r10:e80a9480 r9:e8edfe00 r8:ea678cca r7:00000a20 r6:00000000 r5:ec46d000
[  457.309586]  r4:ec46d9e0
[  457.312433] [<c0e2b0fc>] (cfg80211_new_sta) from [<bf086684>] (rtw_cfg80211_indicate_sta_assoc+0x80/0x9c [r8723bs])
[  457.324095]  r10:00009930 r9:e85b9d80 r8:bf091050 r7:00000000 r6:00000000 r5:0000001c
[  457.332831]  r4:c1606788
[  457.335692] [<bf086604>] (rtw_cfg80211_indicate_sta_assoc [r8723bs]) from [<bf03df38>] (rtw_stassoc_event_callback+0x1c8/0x1d4 [r8723bs])
[  457.349489]  r7:ea678cc0 r6:000000a1 r5:f1225f84 r4:f086b000
[  457.355845] [<bf03dd70>] (rtw_stassoc_event_callback [r8723bs]) from [<bf048e4c>] (mlme_evt_hdl+0x8c/0xb4 [r8723bs])
[  457.367601]  r7:c1604900 r6:f086c4b8 r5:00000000 r4:f086c000
[  457.373959] [<bf048dc0>] (mlme_evt_hdl [r8723bs]) from [<bf03693c>] (rtw_cmd_thread+0x198/0x3d8 [r8723bs])
[  457.384744]  r5:f086e000 r4:f086c000
[  457.388754] [<bf0367a4>] (rtw_cmd_thread [r8723bs]) from [<c014a214>] (kthread+0x170/0x174)
[  457.398083]  r10:ed7a57e8 r9:bf0367a4 r8:f086b000 r7:e8ede000 r6:00000000 r5:e9975200
[  457.406828]  r4:e8369900
[  457.409653] [<c014a0a4>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
[  457.417718] Exception stack(0xe8edffb0 to 0xe8edfff8)
[  457.423356] ffa0:                                     00000000 00000000 00000000 00000000
[  457.432492] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  457.441618] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000
[  457.449006]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c014a0a4
[  457.457750]  r4:e9975200
[  457.460574] Code: 1a000003 e5953004 e3130001 1a000000 (e7f001f2)
[  457.467381] ---[ end trace 4acbc8c15e9e6aa7 ]---

Link: https://forum.armbian.com/topic/14727-wifi-ap-kernel-bug-in-kernel-5444/
Fixes: 8689c051a201 ("cfg80211: dynamically allocate per-tid stats for station info")
Fixes: f5ea9120be2e ("nl80211: add generation number to all dumps")
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608064620.74059-1-wlooi@ucalgary.ca
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c
+++ b/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c
@@ -2406,7 +2406,7 @@ void rtw_cfg80211_indicate_sta_assoc(str
 	DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(padapter));
 
 	{
-		struct station_info sinfo;
+		struct station_info sinfo = {};
 		u8 ie_offset;
 		if (GetFrameSubType(pmgmt_frame) == WIFI_ASSOCREQ)
 			ie_offset = _ASOCREQ_IE_OFFSET_;

[PATCH 5.4 43/84] btrfs: return value from btrfs_mark_extent_written() in case of error

[Greg Kroah-Hartman]

From: Ritesh Harjani <riteshh@linux.ibm.com>

commit e7b2ec3d3d4ebeb4cff7ae45cf430182fa6a49fb upstream.

We always return 0 even in case of an error in btrfs_mark_extent_written().
Fix it to return proper error value in case of a failure. All callers
handle it.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/file.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1163,7 +1163,7 @@ int btrfs_mark_extent_written(struct btr
 	int del_nr = 0;
 	int del_slot = 0;
 	int recow;
-	int ret;
+	int ret = 0;
 	u64 ino = btrfs_ino(inode);
 
 	path = btrfs_alloc_path();
@@ -1384,7 +1384,7 @@ again:
 	}
 out:
 	btrfs_free_path(path);
-	return 0;
+	return ret;
 }
 
 /*

[PATCH 5.4 44/84] btrfs: promote debugging asserts to full-fledged checks in validate_super

[Greg Kroah-Hartman]

From: Nikolay Borisov <nborisov@suse.com>

commit aefd7f7065567a4666f42c0fc8cdb379d2e036bf upstream.

Syzbot managed to trigger this assert while performing its fuzzing.
Turns out it's better to have those asserts turned into full-fledged
checks so that in case buggy btrfs images are mounted the users gets
an error and mounting is stopped. Alternatively with CONFIG_BTRFS_ASSERT
disabled such image would have been erroneously allowed to be mounted.

Reported-by: syzbot+a6bf271c02e4fe66b4e4@syzkaller.appspotmail.com
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add uuids to the messages ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/disk-io.c |   26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -2463,6 +2463,24 @@ static int validate_super(struct btrfs_f
 		ret = -EINVAL;
 	}
 
+	if (memcmp(fs_info->fs_devices->fsid, fs_info->super_copy->fsid,
+		   BTRFS_FSID_SIZE)) {
+		btrfs_err(fs_info,
+		"superblock fsid doesn't match fsid of fs_devices: %pU != %pU",
+			fs_info->super_copy->fsid, fs_info->fs_devices->fsid);
+		ret = -EINVAL;
+	}
+
+	if (btrfs_fs_incompat(fs_info, METADATA_UUID) &&
+	    memcmp(fs_info->fs_devices->metadata_uuid,
+		   fs_info->super_copy->metadata_uuid, BTRFS_FSID_SIZE)) {
+		btrfs_err(fs_info,
+"superblock metadata_uuid doesn't match metadata uuid of fs_devices: %pU != %pU",
+			fs_info->super_copy->metadata_uuid,
+			fs_info->fs_devices->metadata_uuid);
+		ret = -EINVAL;
+	}
+
 	if (memcmp(fs_info->fs_devices->metadata_uuid, sb->dev_item.fsid,
 		   BTRFS_FSID_SIZE) != 0) {
 		btrfs_err(fs_info,
@@ -2837,14 +2855,6 @@ int open_ctree(struct super_block *sb,
 
 	disk_super = fs_info->super_copy;
 
-	ASSERT(!memcmp(fs_info->fs_devices->fsid, fs_info->super_copy->fsid,
-		       BTRFS_FSID_SIZE));
-
-	if (btrfs_fs_incompat(fs_info, METADATA_UUID)) {
-		ASSERT(!memcmp(fs_info->fs_devices->metadata_uuid,
-				fs_info->super_copy->metadata_uuid,
-				BTRFS_FSID_SIZE));
-	}
 
 	features = btrfs_super_flags(disk_super);
 	if (features & BTRFS_SUPER_FLAG_CHANGING_FSID_V2) {

[PATCH 5.4 45/84] cgroup1: dont allow \n in renaming

[Greg Kroah-Hartman]

From: Alexander Kuznetsov <wwfq@yandex-team.ru>

commit b7e24eb1caa5f8da20d405d262dba67943aedc42 upstream.

cgroup_mkdir() have restriction on newline usage in names:
$ mkdir $'/sys/fs/cgroup/cpu/test\ntest2'
mkdir: cannot create directory
'/sys/fs/cgroup/cpu/test\ntest2': Invalid argument

But in cgroup1_rename() such check is missed.
This allows us to make /proc/<pid>/cgroup unparsable:
$ mkdir /sys/fs/cgroup/cpu/test
$ mv /sys/fs/cgroup/cpu/test $'/sys/fs/cgroup/cpu/test\ntest2'
$ echo $$ > $'/sys/fs/cgroup/cpu/test\ntest2'
$ cat /proc/self/cgroup
11:pids:/
10:freezer:/
9:hugetlb:/
8:cpuset:/
7:blkio:/user.slice
6:memory:/user.slice
5:net_cls,net_prio:/
4:perf_event:/
3:devices:/user.slice
2:cpu,cpuacct:/test
test2
1:name=systemd:/
0::/

Signed-off-by: Alexander Kuznetsov <wwfq@yandex-team.ru>
Reported-by: Andrey Krasichkov <buglloc@yandex-team.ru>
Acked-by: Dmitry Yakunin <zeil@yandex-team.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/cgroup/cgroup-v1.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/kernel/cgroup/cgroup-v1.c
+++ b/kernel/cgroup/cgroup-v1.c
@@ -821,6 +821,10 @@ static int cgroup1_rename(struct kernfs_
 	struct cgroup *cgrp = kn->priv;
 	int ret;
 
+	/* do not accept '\n' to prevent making /proc/<pid>/cgroup unparsable */
+	if (strchr(new_name_str, '\n'))
+		return -EINVAL;
+
 	if (kernfs_type(kn) != KERNFS_DIR)
 		return -ENOTDIR;
 	if (kn->parent != new_parent)

[PATCH 5.4 46/84] USB: f_ncm: ncm_bitrate (speed) is unsigned

[Greg Kroah-Hartman]

From: Maciej Żenczykowski <maze@google.com>

commit 3370139745853f7826895293e8ac3aec1430508e upstream.

[  190.544755] configfs-gadget gadget: notify speed -44967296

This is because 4250000000 - 2**32 is -44967296.

Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added")
Cc: Brooke Basile <brookebasile@gmail.com>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Yauheni Kaliuta <yauheni.kaliuta@nokia.com>
Cc: Linux USB Mailing List <linux-usb@vger.kernel.org>
Acked-By: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608005344.3762668-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/f_ncm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/gadget/function/f_ncm.c
+++ b/drivers/usb/gadget/function/f_ncm.c
@@ -583,7 +583,7 @@ static void ncm_do_notify(struct f_ncm *
 		data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget));
 		data[1] = data[0];
 
-		DBG(cdev, "notify speed %d\n", ncm_bitrate(cdev->gadget));
+		DBG(cdev, "notify speed %u\n", ncm_bitrate(cdev->gadget));
 		ncm->notify_state = NCM_NOTIFY_CONNECT;
 		break;
 	}

[PATCH 5.4 47/84] usb: f_ncm: only first packet of aggregate needs to start timer

[Greg Kroah-Hartman]

From: Maciej Żenczykowski <maze@google.com>

commit 1958ff5ad2d4908b44a72bcf564dfe67c981e7fe upstream.

The reasoning for this change is that if we already had
a packet pending, then we also already had a pending timer,
and as such there is no need to reschedule it.

This also prevents packets getting delayed 60 ms worst case
under a tiny packet every 290us transmit load, by keeping the
timeout always relative to the first queued up packet.
(300us delay * 16KB max aggregation / 80 byte packet =~ 60 ms)

As such the first packet is now at most delayed by 300us.

Under low transmit load, this will simply result in us sending
a shorter aggregate, as originally intended.

This patch has the benefit of greatly reducing (by ~10 factor
with 1500 byte frames aggregated into 16 kiB) the number of
(potentially pretty costly) updates to the hrtimer.

Cc: Brooke Basile <brookebasile@gmail.com>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210608085438.813960-1-zenczykowski@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/f_ncm.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/usb/gadget/function/f_ncm.c
+++ b/drivers/usb/gadget/function/f_ncm.c
@@ -1101,11 +1101,11 @@ static struct sk_buff *ncm_wrap_ntb(stru
 			ncm->ndp_dgram_count = 1;
 
 			/* Note: we skip opts->next_ndp_index */
-		}
 
-		/* Delay the timer. */
-		hrtimer_start(&ncm->task_timer, TX_TIMEOUT_NSECS,
-			      HRTIMER_MODE_REL_SOFT);
+			/* Start the timer. */
+			hrtimer_start(&ncm->task_timer, TX_TIMEOUT_NSECS,
+				      HRTIMER_MODE_REL_SOFT);
+		}
 
 		/* Add the datagram position entries */
 		ntb_ndp = skb_put_zero(ncm->skb_tx_ndp, dgram_idx_len);

[PATCH 5.4 48/84] usb: pd: Set PD_T_SINK_WAIT_CAP to 310ms

[Greg Kroah-Hartman]

From: Kyle Tso <kyletso@google.com>

commit 6490fa565534fa83593278267785a694fd378a2b upstream.

Current timer PD_T_SINK_WAIT_CAP is set to 240ms which will violate the
SinkWaitCapTimer (tTypeCSinkWaitCap 310 - 620 ms) defined in the PD
Spec if the port is faster enough when running the state machine. Set it
to the lower bound 310ms to ensure the timeout is in Spec.

Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210528081613.730661-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/usb/pd.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/linux/usb/pd.h
+++ b/include/linux/usb/pd.h
@@ -425,7 +425,7 @@ static inline unsigned int rdo_max_power
 #define PD_T_SENDER_RESPONSE	60	/* 24 - 30 ms, relaxed */
 #define PD_T_SOURCE_ACTIVITY	45
 #define PD_T_SINK_ACTIVITY	135
-#define PD_T_SINK_WAIT_CAP	240
+#define PD_T_SINK_WAIT_CAP	310	/* 310 - 620 ms */
 #define PD_T_PS_TRANSITION	500
 #define PD_T_SRC_TRANSITION	35
 #define PD_T_DRP_SNK		40

[PATCH 5.4 49/84] usb: dwc3: debugfs: Add and remove endpoint dirs dynamically

[Greg Kroah-Hartman]

From: Jack Pham <jackp@codeaurora.org>

commit 8d396bb0a5b62b326f6be7594d8bd46b088296bd upstream.

The DWC3 DebugFS directory and files are currently created once
during probe.  This includes creation of subdirectories for each
of the gadget's endpoints.  This works fine for peripheral-only
controllers, as dwc3_core_init_mode() calls dwc3_gadget_init()
just prior to calling dwc3_debugfs_init().

However, for dual-role controllers, dwc3_core_init_mode() will
instead call dwc3_drd_init() which is problematic in a few ways.
First, the initial state must be determined, then dwc3_set_mode()
will have to schedule drd_work and by then dwc3_debugfs_init()
could have already been invoked.  Even if the initial mode is
peripheral, dwc3_gadget_init() happens after the DebugFS files
are created, and worse so if the initial state is host and the
controller switches to peripheral much later.  And secondly,
even if the gadget endpoints' debug entries were successfully
created, if the controller exits peripheral mode, its dwc3_eps
are freed so the debug files would now hold stale references.

So it is best if the DebugFS endpoint entries are created and
removed dynamically at the same time the underlying dwc3_eps are.
Do this by calling dwc3_debugfs_create_endpoint_dir() as each
endpoint is created, and conversely remove the DebugFS entry when
the endpoint is freed.

Fixes: 41ce1456e1db ("usb: dwc3: core: make dwc3_set_mode() work properly")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210529192932.22912-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/debug.h   |    3 +++
 drivers/usb/dwc3/debugfs.c |   21 ++-------------------
 drivers/usb/dwc3/gadget.c  |    3 +++
 3 files changed, 8 insertions(+), 19 deletions(-)

--- a/drivers/usb/dwc3/debug.h
+++ b/drivers/usb/dwc3/debug.h
@@ -409,9 +409,12 @@ static inline const char *dwc3_gadget_ge
 
 
 #ifdef CONFIG_DEBUG_FS
+extern void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep);
 extern void dwc3_debugfs_init(struct dwc3 *);
 extern void dwc3_debugfs_exit(struct dwc3 *);
 #else
+static inline void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep)
+{  }
 static inline void dwc3_debugfs_init(struct dwc3 *d)
 {  }
 static inline void dwc3_debugfs_exit(struct dwc3 *d)
--- a/drivers/usb/dwc3/debugfs.c
+++ b/drivers/usb/dwc3/debugfs.c
@@ -878,30 +878,14 @@ static void dwc3_debugfs_create_endpoint
 	}
 }
 
-static void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep,
-		struct dentry *parent)
+void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep)
 {
 	struct dentry		*dir;
 
-	dir = debugfs_create_dir(dep->name, parent);
+	dir = debugfs_create_dir(dep->name, dep->dwc->root);
 	dwc3_debugfs_create_endpoint_files(dep, dir);
 }
 
-static void dwc3_debugfs_create_endpoint_dirs(struct dwc3 *dwc,
-		struct dentry *parent)
-{
-	int			i;
-
-	for (i = 0; i < dwc->num_eps; i++) {
-		struct dwc3_ep	*dep = dwc->eps[i];
-
-		if (!dep)
-			continue;
-
-		dwc3_debugfs_create_endpoint_dir(dep, parent);
-	}
-}
-
 void dwc3_debugfs_init(struct dwc3 *dwc)
 {
 	struct dentry		*root;
@@ -935,7 +919,6 @@ void dwc3_debugfs_init(struct dwc3 *dwc)
 				    &dwc3_testmode_fops);
 		debugfs_create_file("link_state", S_IRUGO | S_IWUSR, root, dwc,
 				    &dwc3_link_state_fops);
-		dwc3_debugfs_create_endpoint_dirs(dwc, root);
 	}
 }
 
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2483,6 +2483,8 @@ static int dwc3_gadget_init_endpoint(str
 	INIT_LIST_HEAD(&dep->started_list);
 	INIT_LIST_HEAD(&dep->cancelled_list);
 
+	dwc3_debugfs_create_endpoint_dir(dep);
+
 	return 0;
 }
 
@@ -2526,6 +2528,7 @@ static void dwc3_gadget_free_endpoints(s
 			list_del(&dep->endpoint.ep_list);
 		}
 
+		debugfs_remove_recursive(debugfs_lookup(dep->name, dwc->root));
 		kfree(dep);
 	}
 }

[PATCH 5.4 50/84] usb: dwc3: ep0: fix NULL pointer exception

[Greg Kroah-Hartman]

From: Marian-Cristian Rotariu <marian.c.rotariu@gmail.com>

commit d00889080ab60051627dab1d85831cd9db750e2a upstream.

There is no validation of the index from dwc3_wIndex_to_dep() and we might
be referring a non-existing ep and trigger a NULL pointer exception. In
certain configurations we might use fewer eps and the index might wrongly
indicate a larger ep index than existing.

By adding this validation from the patch we can actually report a wrong
index back to the caller.

In our usecase we are using a composite device on an older kernel, but
upstream might use this fix also. Unfortunately, I cannot describe the
hardware for others to reproduce the issue as it is a proprietary
implementation.

[   82.958261] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a4
[   82.966891] Mem abort info:
[   82.969663]   ESR = 0x96000006
[   82.972703]   Exception class = DABT (current EL), IL = 32 bits
[   82.978603]   SET = 0, FnV = 0
[   82.981642]   EA = 0, S1PTW = 0
[   82.984765] Data abort info:
[   82.987631]   ISV = 0, ISS = 0x00000006
[   82.991449]   CM = 0, WnR = 0
[   82.994409] user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c6210ccc
[   83.000999] [00000000000000a4] pgd=0000000053aa5003, pud=0000000053aa5003, pmd=0000000000000000
[   83.009685] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[   83.026433] Process irq/62-dwc3 (pid: 303, stack limit = 0x000000003985154c)
[   83.033470] CPU: 0 PID: 303 Comm: irq/62-dwc3 Not tainted 4.19.124 #1
[   83.044836] pstate: 60000085 (nZCv daIf -PAN -UAO)
[   83.049628] pc : dwc3_ep0_handle_feature+0x414/0x43c
[   83.054558] lr : dwc3_ep0_interrupt+0x3b4/0xc94

...

[   83.141788] Call trace:
[   83.144227]  dwc3_ep0_handle_feature+0x414/0x43c
[   83.148823]  dwc3_ep0_interrupt+0x3b4/0xc94
[   83.181546] ---[ end trace aac6b5267d84c32f ]---

Signed-off-by: Marian-Cristian Rotariu <marian.c.rotariu@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608162650.58426-1-marian.c.rotariu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/ep0.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -292,6 +292,9 @@ static struct dwc3_ep *dwc3_wIndex_to_de
 		epnum |= 1;
 
 	dep = dwc->eps[epnum];
+	if (dep == NULL)
+		return NULL;
+
 	if (dep->flags & DWC3_EP_ENABLED)
 		return dep;
 

[PATCH 5.4 51/84] usb: musb: fix MUSB_QUIRK_B_DISCONNECT_99 handling

[Greg Kroah-Hartman]

From: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

commit b65ba0c362be665192381cc59e3ac3ef6f0dd1e1 upstream.

In commit 92af4fc6ec33 ("usb: musb: Fix suspend with devices
connected for a64"), the logic to support the
MUSB_QUIRK_B_DISCONNECT_99 quirk was modified to only conditionally
schedule the musb->irq_work delayed work.

This commit badly breaks ECM Gadget on AM335X. Indeed, with this
commit, one can observe massive packet loss:

$ ping 192.168.0.100
...
15 packets transmitted, 3 received, 80% packet loss, time 14316ms

Reverting this commit brings back a properly functioning ECM
Gadget. An analysis of the commit seems to indicate that a mistake was
made: the previous code was not falling through into the
MUSB_QUIRK_B_INVALID_VBUS_91, but now it is, unless the condition is
taken.

Changing the logic to be as it was before the problematic commit *and*
only conditionally scheduling musb->irq_work resolves the regression:

$ ping 192.168.0.100
...
64 packets transmitted, 64 received, 0% packet loss, time 64475ms

Fixes: 92af4fc6ec33 ("usb: musb: Fix suspend with devices connected for a64")
Cc: stable@vger.kernel.org
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Drew Fustini <drew@beagleboard.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Link: https://lore.kernel.org/r/20210528140446.278076-1-thomas.petazzoni@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/musb/musb_core.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1871,9 +1871,8 @@ static void musb_pm_runtime_check_sessio
 			schedule_delayed_work(&musb->irq_work,
 					      msecs_to_jiffies(1000));
 			musb->quirk_retries--;
-			break;
 		}
-		fallthrough;
+		break;
 	case MUSB_QUIRK_B_INVALID_VBUS_91:
 		if (musb->quirk_retries && !musb->flush_irq_work) {
 			musb_dbg(musb,

[PATCH 5.4 52/84] usb: typec: wcove: Use LE to CPU conversion when accessing msg->header

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

commit d5ab95da2a41567440097c277c5771ad13928dad upstream.

As LKP noticed the Sparse is not happy about strict type handling:
   .../typec/tcpm/wcove.c:380:50: sparse:     expected unsigned short [usertype] header
   .../typec/tcpm/wcove.c:380:50: sparse:     got restricted __le16 const [usertype] header

Fix this by switching to use pd_header_cnt_le() instead of pd_header_cnt()
in the affected code.

Fixes: ae8a2ca8a221 ("usb: typec: Group all TCPCI/TCPM code together")
Fixes: 3c4fb9f16921 ("usb: typec: wcove: start using tcpm for USB PD support")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210609172202.83377-1-andriy.shevchenko@linux.intel.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/tcpm/wcove.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/typec/tcpm/wcove.c
+++ b/drivers/usb/typec/tcpm/wcove.c
@@ -377,7 +377,7 @@ static int wcove_pd_transmit(struct tcpc
 		const u8 *data = (void *)msg;
 		int i;
 
-		for (i = 0; i < pd_header_cnt(msg->header) * 4 + 2; i++) {
+		for (i = 0; i < pd_header_cnt_le(msg->header) * 4 + 2; i++) {
 			ret = regmap_write(wcove->regmap, USBC_TX_DATA + i,
 					   data[i]);
 			if (ret)

[PATCH 5.4 53/84] usb: typec: ucsi: Clear PPM capability data in ucsi_init() error path

[Greg Kroah-Hartman]

From: Mayank Rana <mrana@codeaurora.org>

commit f247f0a82a4f8c3bfed178d8fd9e069d1424ee4e upstream.

If ucsi_init() fails for some reason (e.g. ucsi_register_port()
fails or general communication failure to the PPM), particularly at
any point after the GET_CAPABILITY command had been issued, this
results in unwinding the initialization and returning an error.
However the ucsi structure's ucsi_capability member retains its
current value, including likely a non-zero num_connectors.
And because ucsi_init() itself is done in a workqueue a UCSI
interface driver will be unaware that it failed and may think the
ucsi_register() call was completely successful.  Later, if
ucsi_unregister() is called, due to this stale ucsi->cap value it
would try to access the items in the ucsi->connector array which
might not be in a proper state or not even allocated at all and
results in NULL or invalid pointer dereference.

Fix this by clearing the ucsi->cap value to 0 during the error
path of ucsi_init() in order to prevent a later ucsi_unregister()
from entering the connector cleanup loop.

Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface")
Cc: stable@vger.kernel.org
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210609073535.5094-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/ucsi/ucsi.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -977,6 +977,7 @@ err_unregister:
 	}
 
 err_reset:
+	memset(&ucsi->cap, 0, sizeof(ucsi->cap));
 	ucsi_reset_ppm(ucsi);
 err:
 	mutex_unlock(&ucsi->ppm_lock);

[PATCH 5.4 54/84] usb: gadget: f_fs: Ensure io_completion_wq is idle during unbind

[Greg Kroah-Hartman]

From: Wesley Cheng <wcheng@codeaurora.org>

commit 6fc1db5e6211e30fbb1cee8d7925d79d4ed2ae14 upstream.

During unbind, ffs_func_eps_disable() will be executed, resulting in
completion callbacks for any pending USB requests.  When using AIO,
irrespective of the completion status, io_data work is queued to
io_completion_wq to evaluate and handle the completed requests.  Since
work runs asynchronously to the unbind() routine, there can be a
scenario where the work runs after the USB gadget has been fully
removed, resulting in accessing of a resource which has been already
freed. (i.e. usb_ep_free_request() accessing the USB ep structure)

Explicitly drain the io_completion_wq, instead of relying on the
destroy_workqueue() (in ffs_data_put()) to make sure no pending
completion work items are running.

Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1621644261-1236-1-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/f_fs.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -3585,6 +3585,9 @@ static void ffs_func_unbind(struct usb_c
 		ffs->func = NULL;
 	}
 
+	/* Drain any pending AIO completions */
+	drain_workqueue(ffs->io_completion_wq);
+
 	if (!--opts->refcnt)
 		functionfs_unbind(ffs);
 

[PATCH 5.4 55/84] USB: serial: ftdi_sio: add NovaTech OrionMX product ID

[Greg Kroah-Hartman]

From: George McCollister <george.mccollister@gmail.com>

commit bc96c72df33ee81b24d87eab953c73f7bcc04f29 upstream.

Add PID for the NovaTech OrionMX so it can be automatically detected.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/ftdi_sio.c     |    1 +
 drivers/usb/serial/ftdi_sio_ids.h |    1 +
 2 files changed, 2 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -611,6 +611,7 @@ static const struct usb_device_id id_tab
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLX_PLUS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORION_IO_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONMX_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SYNAPSE_SS200_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX2_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -581,6 +581,7 @@
 #define FTDI_NT_ORIONLXM_PID		0x7c90	/* OrionLXm Substation Automation Platform */
 #define FTDI_NT_ORIONLX_PLUS_PID	0x7c91	/* OrionLX+ Substation Automation Platform */
 #define FTDI_NT_ORION_IO_PID		0x7c92	/* Orion I/O */
+#define FTDI_NT_ORIONMX_PID		0x7c93	/* OrionMX */
 
 /*
  * Synapse Wireless product ids (FTDI_VID)

[PATCH 5.4 56/84] USB: serial: omninet: add device id for Zyxel Omni 56K Plus

[Greg Kroah-Hartman]

From: Alexandre GRIVEAUX <agriveaux@deutnet.info>

commit fc0b3dc9a11771c3919eaaaf9d649138b095aa0f upstream.

Add device id for Zyxel Omni 56K Plus modem, this modem include:

USB chip:
NetChip
NET2888

Main chip:
901041A
F721501APGF

Another modem using the same chips is the Zyxel Omni 56K DUO/NEO,
could be added with the right USB ID.

Signed-off-by: Alexandre GRIVEAUX <agriveaux@deutnet.info>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/omninet.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -26,6 +26,7 @@
 
 #define ZYXEL_VENDOR_ID		0x0586
 #define ZYXEL_OMNINET_ID	0x1000
+#define ZYXEL_OMNI_56K_PLUS_ID	0x1500
 /* This one seems to be a re-branded ZyXEL device */
 #define BT_IGNITIONPRO_ID	0x2000
 
@@ -40,6 +41,7 @@ static int omninet_port_remove(struct us
 
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) },
+	{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNI_56K_PLUS_ID) },
 	{ USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) },
 	{ }						/* Terminating entry */
 };

[PATCH 5.4 57/84] USB: serial: quatech2: fix control-request directions

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit eb8dbe80326c3d44c1e38ee4f40e0d8d3e06f2d0 upstream.

The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.

Fix the three requests which erroneously used usb_rcvctrlpipe().

Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver")
Cc: stable@vger.kernel.org      # 3.5
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/quatech2.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -416,7 +416,7 @@ static void qt2_close(struct usb_serial_
 
 	/* flush the port transmit buffer */
 	i = usb_control_msg(serial->dev,
-			    usb_rcvctrlpipe(serial->dev, 0),
+			    usb_sndctrlpipe(serial->dev, 0),
 			    QT2_FLUSH_DEVICE, 0x40, 1,
 			    port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
 
@@ -426,7 +426,7 @@ static void qt2_close(struct usb_serial_
 
 	/* flush the port receive buffer */
 	i = usb_control_msg(serial->dev,
-			    usb_rcvctrlpipe(serial->dev, 0),
+			    usb_sndctrlpipe(serial->dev, 0),
 			    QT2_FLUSH_DEVICE, 0x40, 0,
 			    port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
 
@@ -670,7 +670,7 @@ static int qt2_attach(struct usb_serial
 	int status;
 
 	/* power on unit */
-	status = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+	status = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 				 0xc2, 0x40, 0x8000, 0, NULL, 0,
 				 QT2_USB_TIMEOUT);
 	if (status < 0) {

[PATCH 5.4 58/84] USB: serial: cp210x: fix alternate function for CP2102N QFN20

[Greg Kroah-Hartman]

From: Stefan Agner <stefan@agner.ch>

commit 6f7ec77cc8b64ff5037c1945e4650c65c458037d upstream.

The QFN20 part has a different GPIO/port function assignment. The
configuration struct bit field ordered as TX/RX/RS485/WAKEUP/CLK
which exactly matches GPIO0-3 for QFN24/28. However, QFN20 has a
different GPIO to primary function assignment.

Special case QFN20 to follow to properly detect which GPIOs are
available.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://lore.kernel.org/r/51830b2b24118eb0f77c5c9ac64ffb2f519dbb1d.1622218300.git.stefan@agner.ch
Fixes: c8acfe0aadbe ("USB: serial: cp210x: implement GPIO support for CP2102N")
Cc: stable@vger.kernel.org	# 4.19
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/cp210x.c |   20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -507,6 +507,12 @@ struct cp210x_single_port_config {
 #define CP210X_2NCONFIG_GPIO_RSTLATCH_IDX	587
 #define CP210X_2NCONFIG_GPIO_CONTROL_IDX	600
 
+/* CP2102N QFN20 port configuration values */
+#define CP2102N_QFN20_GPIO2_TXLED_MODE		BIT(2)
+#define CP2102N_QFN20_GPIO3_RXLED_MODE		BIT(3)
+#define CP2102N_QFN20_GPIO1_RS485_MODE		BIT(4)
+#define CP2102N_QFN20_GPIO0_CLK_MODE		BIT(6)
+
 /* CP210X_VENDOR_SPECIFIC, CP210X_WRITE_LATCH call writes these 0x2 bytes. */
 struct cp210x_gpio_write {
 	u8	mask;
@@ -1691,7 +1697,19 @@ static int cp2102n_gpioconf_init(struct
 	priv->gpio_pushpull = (gpio_pushpull >> 3) & 0x0f;
 
 	/* 0 indicates GPIO mode, 1 is alternate function */
-	priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f;
+	if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN20) {
+		/* QFN20 is special... */
+		if (gpio_ctrl & CP2102N_QFN20_GPIO0_CLK_MODE)   /* GPIO 0 */
+			priv->gpio_altfunc |= BIT(0);
+		if (gpio_ctrl & CP2102N_QFN20_GPIO1_RS485_MODE) /* GPIO 1 */
+			priv->gpio_altfunc |= BIT(1);
+		if (gpio_ctrl & CP2102N_QFN20_GPIO2_TXLED_MODE) /* GPIO 2 */
+			priv->gpio_altfunc |= BIT(2);
+		if (gpio_ctrl & CP2102N_QFN20_GPIO3_RXLED_MODE) /* GPIO 3 */
+			priv->gpio_altfunc |= BIT(3);
+	} else {
+		priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f;
+	}
 
 	if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN28) {
 		/*

[PATCH 5.4 59/84] usb: gadget: eem: fix wrong eem header operation

[Greg Kroah-Hartman]

From: Linyu Yuan <linyyuan@codeaurora.com>

commit 305f670846a31a261462577dd0b967c4fa796871 upstream.

when skb_clone() or skb_copy_expand() fail,
it should pull skb with lengh indicated by header,
or not it will read network data and check it as header.

Cc: <stable@vger.kernel.org>
Signed-off-by: Linyu Yuan <linyyuan@codeaurora.com>
Link: https://lore.kernel.org/r/20210608233547.3767-1-linyyuan@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/f_eem.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/function/f_eem.c
+++ b/drivers/usb/gadget/function/f_eem.c
@@ -497,7 +497,7 @@ static int eem_unwrap(struct gether *por
 			skb2 = skb_clone(skb, GFP_ATOMIC);
 			if (unlikely(!skb2)) {
 				DBG(cdev, "unable to unframe EEM packet\n");
-				continue;
+				goto next;
 			}
 			skb_trim(skb2, len - ETH_FCS_LEN);
 
@@ -507,7 +507,7 @@ static int eem_unwrap(struct gether *por
 						GFP_ATOMIC);
 			if (unlikely(!skb3)) {
 				dev_kfree_skb_any(skb2);
-				continue;
+				goto next;
 			}
 			dev_kfree_skb_any(skb2);
 			skb_queue_tail(list, skb3);

[PATCH 5.4 60/84] usb: fix various gadgets null ptr deref on 10gbps cabling.

[Greg Kroah-Hartman]

From: Maciej Żenczykowski <maze@google.com>

commit 90c4d05780d47e14a50e11a7f17373104cd47d25 upstream.

This avoids a null pointer dereference in
f_{ecm,eem,hid,loopback,printer,rndis,serial,sourcesink,subset,tcm}
by simply reusing the 5gbps config for 10gbps.

Fixes: eaef50c76057 ("usb: gadget: Update usb_assign_descriptors for SuperSpeedPlus")
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Michael R Sweet <msweet@msweet.org>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Peter Chen <peter.chen@nxp.com>
Cc: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Cc: Wei Ming Chen <jj251510319013@gmail.com>
Cc: Will McVicker <willmcvicker@google.com>
Cc: Zqiang <qiang.zhang@windriver.com>
Reviewed-By: Lorenzo Colitti <lorenzo@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210608044141.3898496-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/f_ecm.c        |    2 +-
 drivers/usb/gadget/function/f_eem.c        |    2 +-
 drivers/usb/gadget/function/f_hid.c        |    3 ++-
 drivers/usb/gadget/function/f_loopback.c   |    2 +-
 drivers/usb/gadget/function/f_printer.c    |    3 ++-
 drivers/usb/gadget/function/f_rndis.c      |    2 +-
 drivers/usb/gadget/function/f_serial.c     |    2 +-
 drivers/usb/gadget/function/f_sourcesink.c |    3 ++-
 drivers/usb/gadget/function/f_subset.c     |    2 +-
 drivers/usb/gadget/function/f_tcm.c        |    3 ++-
 10 files changed, 14 insertions(+), 10 deletions(-)

--- a/drivers/usb/gadget/function/f_ecm.c
+++ b/drivers/usb/gadget/function/f_ecm.c
@@ -791,7 +791,7 @@ ecm_bind(struct usb_configuration *c, st
 		fs_ecm_notify_desc.bEndpointAddress;
 
 	status = usb_assign_descriptors(f, ecm_fs_function, ecm_hs_function,
-			ecm_ss_function, NULL);
+			ecm_ss_function, ecm_ss_function);
 	if (status)
 		goto fail;
 
--- a/drivers/usb/gadget/function/f_eem.c
+++ b/drivers/usb/gadget/function/f_eem.c
@@ -304,7 +304,7 @@ static int eem_bind(struct usb_configura
 	eem_ss_out_desc.bEndpointAddress = eem_fs_out_desc.bEndpointAddress;
 
 	status = usb_assign_descriptors(f, eem_fs_function, eem_hs_function,
-			eem_ss_function, NULL);
+			eem_ss_function, eem_ss_function);
 	if (status)
 		goto fail;
 
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -808,7 +808,8 @@ static int hidg_bind(struct usb_configur
 		hidg_fs_out_ep_desc.bEndpointAddress;
 
 	status = usb_assign_descriptors(f, hidg_fs_descriptors,
-			hidg_hs_descriptors, hidg_ss_descriptors, NULL);
+			hidg_hs_descriptors, hidg_ss_descriptors,
+			hidg_ss_descriptors);
 	if (status)
 		goto fail;
 
--- a/drivers/usb/gadget/function/f_loopback.c
+++ b/drivers/usb/gadget/function/f_loopback.c
@@ -207,7 +207,7 @@ autoconf_fail:
 	ss_loop_sink_desc.bEndpointAddress = fs_loop_sink_desc.bEndpointAddress;
 
 	ret = usb_assign_descriptors(f, fs_loopback_descs, hs_loopback_descs,
-			ss_loopback_descs, NULL);
+			ss_loopback_descs, ss_loopback_descs);
 	if (ret)
 		return ret;
 
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -1063,7 +1063,8 @@ autoconf_fail:
 	ss_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
 
 	ret = usb_assign_descriptors(f, fs_printer_function,
-			hs_printer_function, ss_printer_function, NULL);
+			hs_printer_function, ss_printer_function,
+			ss_printer_function);
 	if (ret)
 		return ret;
 
--- a/drivers/usb/gadget/function/f_rndis.c
+++ b/drivers/usb/gadget/function/f_rndis.c
@@ -789,7 +789,7 @@ rndis_bind(struct usb_configuration *c,
 	ss_notify_desc.bEndpointAddress = fs_notify_desc.bEndpointAddress;
 
 	status = usb_assign_descriptors(f, eth_fs_function, eth_hs_function,
-			eth_ss_function, NULL);
+			eth_ss_function, eth_ss_function);
 	if (status)
 		goto fail;
 
--- a/drivers/usb/gadget/function/f_serial.c
+++ b/drivers/usb/gadget/function/f_serial.c
@@ -233,7 +233,7 @@ static int gser_bind(struct usb_configur
 	gser_ss_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress;
 
 	status = usb_assign_descriptors(f, gser_fs_function, gser_hs_function,
-			gser_ss_function, NULL);
+			gser_ss_function, gser_ss_function);
 	if (status)
 		goto fail;
 	dev_dbg(&cdev->gadget->dev, "generic ttyGS%d: %s speed IN/%s OUT/%s\n",
--- a/drivers/usb/gadget/function/f_sourcesink.c
+++ b/drivers/usb/gadget/function/f_sourcesink.c
@@ -431,7 +431,8 @@ no_iso:
 	ss_iso_sink_desc.bEndpointAddress = fs_iso_sink_desc.bEndpointAddress;
 
 	ret = usb_assign_descriptors(f, fs_source_sink_descs,
-			hs_source_sink_descs, ss_source_sink_descs, NULL);
+			hs_source_sink_descs, ss_source_sink_descs,
+			ss_source_sink_descs);
 	if (ret)
 		return ret;
 
--- a/drivers/usb/gadget/function/f_subset.c
+++ b/drivers/usb/gadget/function/f_subset.c
@@ -358,7 +358,7 @@ geth_bind(struct usb_configuration *c, s
 		fs_subset_out_desc.bEndpointAddress;
 
 	status = usb_assign_descriptors(f, fs_eth_function, hs_eth_function,
-			ss_eth_function, NULL);
+			ss_eth_function, ss_eth_function);
 	if (status)
 		goto fail;
 
--- a/drivers/usb/gadget/function/f_tcm.c
+++ b/drivers/usb/gadget/function/f_tcm.c
@@ -2056,7 +2056,8 @@ static int tcm_bind(struct usb_configura
 	uasp_fs_cmd_desc.bEndpointAddress = uasp_ss_cmd_desc.bEndpointAddress;
 
 	ret = usb_assign_descriptors(f, uasp_fs_function_desc,
-			uasp_hs_function_desc, uasp_ss_function_desc, NULL);
+			uasp_hs_function_desc, uasp_ss_function_desc,
+			uasp_ss_function_desc);
 	if (ret)
 		goto ep_fail;
 

[PATCH 5.4 61/84] usb: fix various gadget panics on 10gbps cabling

[Greg Kroah-Hartman]

From: Maciej Żenczykowski <maze@google.com>

commit 032e288097a553db5653af552dd8035cd2a0ba96 upstream.

usb_assign_descriptors() is called with 5 parameters,
the last 4 of which are the usb_descriptor_header for:
  full-speed (USB1.1 - 12Mbps [including USB1.0 low-speed @ 1.5Mbps),
  high-speed (USB2.0 - 480Mbps),
  super-speed (USB3.0 - 5Gbps),
  super-speed-plus (USB3.1 - 10Gbps).

The differences between full/high/super-speed descriptors are usually
substantial (due to changes in the maximum usb block size from 64 to 512
to 1024 bytes and other differences in the specs), while the difference
between 5 and 10Gbps descriptors may be as little as nothing
(in many cases the same tuning is simply good enough).

However if a gadget driver calls usb_assign_descriptors() with
a NULL descriptor for super-speed-plus and is then used on a max 10gbps
configuration, the kernel will crash with a null pointer dereference,
when a 10gbps capable device port + cable + host port combination shows up.
(This wouldn't happen if the gadget max-speed was set to 5gbps, but
it of course defaults to the maximum, and there's no real reason to
artificially limit it)

The fix is to simply use the 5gbps descriptor as the 10gbps descriptor,
if a 10gbps descriptor wasn't provided.

Obviously this won't fix the problem if the 5gbps descriptor is also
NULL, but such cases can't be so trivially solved (and any such gadgets
are unlikely to be used with USB3 ports any way).

Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210609024459.1126080-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/config.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/usb/gadget/config.c
+++ b/drivers/usb/gadget/config.c
@@ -164,6 +164,14 @@ int usb_assign_descriptors(struct usb_fu
 {
 	struct usb_gadget *g = f->config->cdev->gadget;
 
+	/* super-speed-plus descriptor falls back to super-speed one,
+	 * if such a descriptor was provided, thus avoiding a NULL
+	 * pointer dereference if a 5gbps capable gadget is used with
+	 * a 10gbps capable config (device port + cable + host port)
+	 */
+	if (!ssp)
+		ssp = ss;
+
 	if (fs) {
 		f->fs_descriptors = usb_copy_descriptors(fs);
 		if (!f->fs_descriptors)

[PATCH 5.4 62/84] regulator: core: resolve supply for boot-on/always-on regulators

[Greg Kroah-Hartman]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

commit 98e48cd9283dbac0e1445ee780889f10b3d1db6a upstream.

For the boot-on/always-on regulators the set_machine_constrainst() is
called before resolving rdev->supply. Thus the code would try to enable
rdev before enabling supplying regulator. Enforce resolving supply
regulator before enabling rdev.

Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210519221224.2868496-1-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/regulator/core.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1381,6 +1381,12 @@ static int set_machine_constraints(struc
 	 * and we have control then make sure it is enabled.
 	 */
 	if (rdev->constraints->always_on || rdev->constraints->boot_on) {
+		/* If we want to enable this regulator, make sure that we know
+		 * the supplying regulator.
+		 */
+		if (rdev->supply_name && !rdev->supply)
+			return -EPROBE_DEFER;
+
 		if (rdev->supply) {
 			ret = regulator_enable(rdev->supply);
 			if (ret < 0) {

[PATCH 5.4 63/84] regulator: max77620: Use device_set_of_node_from_dev()

[Greg Kroah-Hartman]

From: Dmitry Osipenko <digetx@gmail.com>

commit 6f55c5dd1118b3076d11d9cb17f5c5f4bc3a1162 upstream.

The MAX77620 driver fails to re-probe on deferred probe because driver
core tries to claim resources that are already claimed by the PINCTRL
device. Use device_set_of_node_from_dev() helper which marks OF node as
reused, skipping erroneous execution of pinctrl_bind_pins() for the PMIC
device on the re-probe.

Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210523224243.13219-2-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/regulator/max77620-regulator.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/regulator/max77620-regulator.c
+++ b/drivers/regulator/max77620-regulator.c
@@ -814,6 +814,13 @@ static int max77620_regulator_probe(stru
 	config.dev = dev;
 	config.driver_data = pmic;
 
+	/*
+	 * Set of_node_reuse flag to prevent driver core from attempting to
+	 * claim any pinmux resources already claimed by the parent device.
+	 * Otherwise PMIC driver will fail to re-probe.
+	 */
+	device_set_of_node_from_dev(&pdev->dev, pdev->dev.parent);
+
 	for (id = 0; id < MAX77620_NUM_REGS; id++) {
 		struct regulator_dev *rdev;
 		struct regulator_desc *rdesc;

[PATCH 5.4 64/84] usb: typec: mux: Fix copy-paste mistake in typec_mux_match

[Greg Kroah-Hartman]

From: Bjorn Andersson <bjorn.andersson@linaro.org>

commit 142d0b24c1b17139f1aaaacae7542a38aa85640f upstream.

Fix the copy-paste mistake in the return path of typec_mux_match(),
where dev is considered a member of struct typec_switch rather than
struct typec_mux.

The two structs are identical in regards to having the struct device as
the first entry, so this provides no functional change.

Fixes: 3370db35193b ("usb: typec: Registering real device entries for the muxes")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210610002132.3088083-1-bjorn.andersson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/mux.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/typec/mux.c
+++ b/drivers/usb/typec/mux.c
@@ -243,7 +243,7 @@ find_mux:
 	dev = class_find_device(&typec_mux_class, NULL, con->fwnode,
 				mux_fwnode_match);
 
-	return dev ? to_typec_switch(dev) : ERR_PTR(-EPROBE_DEFER);
+	return dev ? to_typec_mux(dev) : ERR_PTR(-EPROBE_DEFER);
 }
 
 /**

[PATCH 5.4 65/84] RDMA/ipoib: Fix warning caused by destroying non-initial netns

[Greg Kroah-Hartman]

From: Kamal Heib <kamalheib1@gmail.com>

commit a3e74fb9247cd530dca246699d5eb5a691884d32 upstream.

After the commit 5ce2dced8e95 ("RDMA/ipoib: Set rtnl_link_ops for ipoib
interfaces"), if the IPoIB device is moved to non-initial netns,
destroying that netns lets the device vanish instead of moving it back to
the initial netns, This is happening because default_device_exit() skips
the interfaces due to having rtnl_link_ops set.

Steps to reporoduce:
  ip netns add foo
  ip link set mlx5_ib0 netns foo
  ip netns delete foo

WARNING: CPU: 1 PID: 704 at net/core/dev.c:11435 netdev_exit+0x3f/0x50
Modules linked in: xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT
nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack
nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun d
 fuse
CPU: 1 PID: 704 Comm: kworker/u64:3 Tainted: G S      W  5.13.0-rc1+ #1
Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.1.5 04/11/2016
Workqueue: netns cleanup_net
RIP: 0010:netdev_exit+0x3f/0x50
Code: 48 8b bb 30 01 00 00 e8 ef 81 b1 ff 48 81 fb c0 3a 54 a1 74 13 48
8b 83 90 00 00 00 48 81 c3 90 00 00 00 48 39 d8 75 02 5b c3 <0f> 0b 5b
c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00
RSP: 0018:ffffb297079d7e08 EFLAGS: 00010206
RAX: ffff8eb542c00040 RBX: ffff8eb541333150 RCX: 000000008010000d
RDX: 000000008010000e RSI: 000000008010000d RDI: ffff8eb440042c00
RBP: ffffb297079d7e48 R08: 0000000000000001 R09: ffffffff9fdeac00
R10: ffff8eb5003be000 R11: 0000000000000001 R12: ffffffffa1545620
R13: ffffffffa1545628 R14: 0000000000000000 R15: ffffffffa1543b20
FS:  0000000000000000(0000) GS:ffff8ed37fa00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005601b5f4c2e8 CR3: 0000001fc8c10002 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 ops_exit_list.isra.9+0x36/0x70
 cleanup_net+0x234/0x390
 process_one_work+0x1cb/0x360
 ? process_one_work+0x360/0x360
 worker_thread+0x30/0x370
 ? process_one_work+0x360/0x360
 kthread+0x116/0x130
 ? kthread_park+0x80/0x80
 ret_from_fork+0x22/0x30

To avoid the above warning and later on the kernel panic that could happen
on shutdown due to a NULL pointer dereference, make sure to set the
netns_refund flag that was introduced by commit 3a5ca857079e ("can: dev:
Move device back to init netns on owning netns delete") to properly
restore the IPoIB interfaces to the initial netns.

Fixes: 5ce2dced8e95 ("RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces")
Link: https://lore.kernel.org/r/20210525150134.139342-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/ulp/ipoib/ipoib_netlink.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/infiniband/ulp/ipoib/ipoib_netlink.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_netlink.c
@@ -163,6 +163,7 @@ static size_t ipoib_get_size(const struc
 
 static struct rtnl_link_ops ipoib_link_ops __read_mostly = {
 	.kind		= "ipoib",
+	.netns_refund   = true,
 	.maxtype	= IFLA_IPOIB_MAX,
 	.policy		= ipoib_policy,
 	.priv_size	= sizeof(struct ipoib_dev_priv),

[PATCH 5.4 66/84] RDMA/mlx4: Do not map the core_clock page to user space unless enabled

[Greg Kroah-Hartman]

From: Shay Drory <shayd@nvidia.com>

commit 404e5a12691fe797486475fe28cc0b80cb8bef2c upstream.

Currently when mlx4 maps the hca_core_clock page to the user space there
are read-modifiable registers, one of which is semaphore, on this page as
well as the clock counter. If user reads the wrong offset, it can modify
the semaphore and hang the device.

Do not map the hca_core_clock page to the user space unless the device has
been put in a backwards compatibility mode to support this feature.

After this patch, mlx4 core_clock won't be mapped to user space on the
majority of existing devices and the uverbs device time feature in
ibv_query_rt_values_ex() will be disabled.

Fixes: 52033cfb5aab ("IB/mlx4: Add mmap call to map the hardware clock")
Link: https://lore.kernel.org/r/9632304e0d6790af84b3b706d8c18732bc0d5e27.1622726305.git.leonro@nvidia.com
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/hw/mlx4/main.c         |    5 +----
 drivers/net/ethernet/mellanox/mlx4/fw.c   |    3 +++
 drivers/net/ethernet/mellanox/mlx4/fw.h   |    1 +
 drivers/net/ethernet/mellanox/mlx4/main.c |    6 ++++++
 include/linux/mlx4/device.h               |    1 +
 5 files changed, 12 insertions(+), 4 deletions(-)

--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -577,12 +577,9 @@ static int mlx4_ib_query_device(struct i
 	props->cq_caps.max_cq_moderation_count = MLX4_MAX_CQ_COUNT;
 	props->cq_caps.max_cq_moderation_period = MLX4_MAX_CQ_PERIOD;
 
-	if (!mlx4_is_slave(dev->dev))
-		err = mlx4_get_internal_clock_params(dev->dev, &clock_params);
-
 	if (uhw->outlen >= resp.response_length + sizeof(resp.hca_core_clock_offset)) {
 		resp.response_length += sizeof(resp.hca_core_clock_offset);
-		if (!err && !mlx4_is_slave(dev->dev)) {
+		if (!mlx4_get_internal_clock_params(dev->dev, &clock_params)) {
 			resp.comp_mask |= MLX4_IB_QUERY_DEV_RESP_MASK_CORE_CLOCK_OFFSET;
 			resp.hca_core_clock_offset = clock_params.offset % PAGE_SIZE;
 		}
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
@@ -823,6 +823,7 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *
 #define QUERY_DEV_CAP_MAD_DEMUX_OFFSET		0xb0
 #define QUERY_DEV_CAP_DMFS_HIGH_RATE_QPN_BASE_OFFSET	0xa8
 #define QUERY_DEV_CAP_DMFS_HIGH_RATE_QPN_RANGE_OFFSET	0xac
+#define QUERY_DEV_CAP_MAP_CLOCK_TO_USER 0xc1
 #define QUERY_DEV_CAP_QP_RATE_LIMIT_NUM_OFFSET	0xcc
 #define QUERY_DEV_CAP_QP_RATE_LIMIT_MAX_OFFSET	0xd0
 #define QUERY_DEV_CAP_QP_RATE_LIMIT_MIN_OFFSET	0xd2
@@ -841,6 +842,8 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *
 
 	if (mlx4_is_mfunc(dev))
 		disable_unsupported_roce_caps(outbox);
+	MLX4_GET(field, outbox, QUERY_DEV_CAP_MAP_CLOCK_TO_USER);
+	dev_cap->map_clock_to_user = field & 0x80;
 	MLX4_GET(field, outbox, QUERY_DEV_CAP_RSVD_QP_OFFSET);
 	dev_cap->reserved_qps = 1 << (field & 0xf);
 	MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_QP_OFFSET);
--- a/drivers/net/ethernet/mellanox/mlx4/fw.h
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.h
@@ -131,6 +131,7 @@ struct mlx4_dev_cap {
 	u32 health_buffer_addrs;
 	struct mlx4_port_cap port_cap[MLX4_MAX_PORTS + 1];
 	bool wol_port[MLX4_MAX_PORTS + 1];
+	bool map_clock_to_user;
 };
 
 struct mlx4_func_cap {
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -498,6 +498,7 @@ static int mlx4_dev_cap(struct mlx4_dev
 		}
 	}
 
+	dev->caps.map_clock_to_user  = dev_cap->map_clock_to_user;
 	dev->caps.uar_page_size	     = PAGE_SIZE;
 	dev->caps.num_uars	     = dev_cap->uar_size / PAGE_SIZE;
 	dev->caps.local_ca_ack_delay = dev_cap->local_ca_ack_delay;
@@ -1948,6 +1949,11 @@ int mlx4_get_internal_clock_params(struc
 	if (mlx4_is_slave(dev))
 		return -EOPNOTSUPP;
 
+	if (!dev->caps.map_clock_to_user) {
+		mlx4_dbg(dev, "Map clock to user is not supported.\n");
+		return -EOPNOTSUPP;
+	}
+
 	if (!params)
 		return -EINVAL;
 
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -632,6 +632,7 @@ struct mlx4_caps {
 	bool			wol_port[MLX4_MAX_PORTS + 1];
 	struct mlx4_rate_limit_caps rl_caps;
 	u32			health_buffer_addrs;
+	bool			map_clock_to_user;
 };
 
 struct mlx4_buf_list {

[PATCH 5.4 67/84] vmlinux.lds.h: Avoid orphan section with !SMP

[Greg Kroah-Hartman]

From: Nathan Chancellor <nathan@kernel.org>

commit d4c6399900364facd84c9e35ce1540b6046c345f upstream.

With x86_64_defconfig and the following configs, there is an orphan
section warning:

CONFIG_SMP=n
CONFIG_AMD_MEM_ENCRYPT=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_KVM=y
CONFIG_PARAVIRT=y

ld: warning: orphan section `.data..decrypted' from `arch/x86/kernel/cpu/vmware.o' being placed in section `.data..decrypted'
ld: warning: orphan section `.data..decrypted' from `arch/x86/kernel/kvm.o' being placed in section `.data..decrypted'

These sections are created with DEFINE_PER_CPU_DECRYPTED, which
ultimately turns into __PCPU_ATTRS, which in turn has a section
attribute with a value of PER_CPU_BASE_SECTION + the section name. When
CONFIG_SMP is not set, the base section is .data and that is not
currently handled in any linker script.

Add .data..decrypted to PERCPU_DECRYPTED_SECTION, which is included in
PERCPU_INPUT -> PERCPU_SECTION, which is include in the x86 linker
script when either CONFIG_X86_64 or CONFIG_SMP is unset, taking care of
the warning.

Fixes: ac26963a1175 ("percpu: Introduce DEFINE_PER_CPU_DECRYPTED")
Link: https://github.com/ClangBuiltLinux/linux/issues/1360
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com> # build
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210506001410.1026691-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/asm-generic/vmlinux.lds.h |    1 +
 1 file changed, 1 insertion(+)

--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -882,6 +882,7 @@
 #ifdef CONFIG_AMD_MEM_ENCRYPT
 #define PERCPU_DECRYPTED_SECTION					\
 	. = ALIGN(PAGE_SIZE);						\
+	*(.data..decrypted)						\
 	*(.data..percpu..decrypted)					\
 	. = ALIGN(PAGE_SIZE);
 #else

[PATCH 5.4 68/84] perf: Fix data race between pin_count increment/decrement

[Greg Kroah-Hartman]

From: Marco Elver <elver@google.com>

commit 6c605f8371159432ec61cbb1488dcf7ad24ad19a upstream.

KCSAN reports a data race between increment and decrement of pin_count:

  write to 0xffff888237c2d4e0 of 4 bytes by task 15740 on cpu 1:
   find_get_context		kernel/events/core.c:4617
   __do_sys_perf_event_open	kernel/events/core.c:12097 [inline]
   __se_sys_perf_event_open	kernel/events/core.c:11933
   ...
  read to 0xffff888237c2d4e0 of 4 bytes by task 15743 on cpu 0:
   perf_unpin_context		kernel/events/core.c:1525 [inline]
   __do_sys_perf_event_open	kernel/events/core.c:12328 [inline]
   __se_sys_perf_event_open	kernel/events/core.c:11933
   ...

Because neither read-modify-write here is atomic, this can lead to one
of the operations being lost, resulting in an inconsistent pin_count.
Fix it by adding the missing locking in the CPU-event case.

Fixes: fe4b04fa31a6 ("perf: Cure task_oncpu_function_call() races")
Reported-by: syzbot+142c9018f5962db69c7e@syzkaller.appspotmail.com
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210527104711.2671610-1-elver@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/events/core.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -4249,7 +4249,9 @@ find_get_context(struct pmu *pmu, struct
 		cpuctx = per_cpu_ptr(pmu->pmu_cpu_context, cpu);
 		ctx = &cpuctx->ctx;
 		get_ctx(ctx);
+		raw_spin_lock_irqsave(&ctx->lock, flags);
 		++ctx->pin_count;
+		raw_spin_unlock_irqrestore(&ctx->lock, flags);
 
 		return ctx;
 	}

[PATCH 5.4 69/84] sched/fair: Make sure to update tg contrib for blocked load

[Greg Kroah-Hartman]

From: Vincent Guittot <vincent.guittot@linaro.org>

commit 02da26ad5ed6ea8680e5d01f20661439611ed776 upstream.

During the update of fair blocked load (__update_blocked_fair()), we
update the contribution of the cfs in tg->load_avg if cfs_rq's pelt
has decayed.  Nevertheless, the pelt values of a cfs_rq could have
been recently updated while propagating the change of a child. In this
case, cfs_rq's pelt will not decayed because it has already been
updated and we don't update tg->load_avg.

__update_blocked_fair
  ...
  for_each_leaf_cfs_rq_safe: child cfs_rq
    update cfs_rq_load_avg() for child cfs_rq
    ...
    update_load_avg(cfs_rq_of(se), se, 0)
      ...
      update cfs_rq_load_avg() for parent cfs_rq
		-propagation of child's load makes parent cfs_rq->load_sum
		 becoming null
        -UPDATE_TG is not set so it doesn't update parent
		 cfs_rq->tg_load_avg_contrib
  ..
  for_each_leaf_cfs_rq_safe: parent cfs_rq
    update cfs_rq_load_avg() for parent cfs_rq
      - nothing to do because parent cfs_rq has already been updated
		recently so cfs_rq->tg_load_avg_contrib is not updated
    ...
    parent cfs_rq is decayed
      list_del_leaf_cfs_rq parent cfs_rq
	  - but it still contibutes to tg->load_avg

we must set UPDATE_TG flags when propagting pending load to the parent

Fixes: 039ae8bcf7a5 ("sched/fair: Fix O(nr_cgroups) in the load balancing path")
Reported-by: Odin Ugedal <odin@uged.al>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Odin Ugedal <odin@uged.al>
Link: https://lkml.kernel.org/r/20210527122916.27683-3-vincent.guittot@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/sched/fair.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -7660,7 +7660,7 @@ static bool __update_blocked_fair(struct
 		/* Propagate pending load changes to the parent, if any: */
 		se = cfs_rq->tg->se[cpu];
 		if (se && !skip_blocked_update(se))
-			update_load_avg(cfs_rq_of(se), se, 0);
+			update_load_avg(cfs_rq_of(se), se, UPDATE_TG);
 
 		/*
 		 * There can be a lot of idle CPU cgroups.  Don't let fully

[PATCH 5.4 70/84] KVM: x86: Ensure liveliness of nested VM-Enter fail tracepoint message

[Greg Kroah-Hartman]

From: Sean Christopherson <seanjc@google.com>

commit f31500b0d437a2464ca5972d8f5439e156b74960 upstream.

Use the __string() machinery provided by the tracing subystem to make a
copy of the string literals consumed by the "nested VM-Enter failed"
tracepoint.  A complete copy is necessary to ensure that the tracepoint
can't outlive the data/memory it consumes and deference stale memory.

Because the tracepoint itself is defined by kvm, if kvm-intel and/or
kvm-amd are built as modules, the memory holding the string literals
defined by the vendor modules will be freed when the module is unloaded,
whereas the tracepoint and its data in the ring buffer will live until
kvm is unloaded (or "indefinitely" if kvm is built-in).

This bug has existed since the tracepoint was added, but was recently
exposed by a new check in tracing to detect exactly this type of bug.

  fmt: '%s%s
  ' current_buffer: ' vmx_dirty_log_t-140127  [003] ....  kvm_nested_vmenter_failed: '
  WARNING: CPU: 3 PID: 140134 at kernel/trace/trace.c:3759 trace_check_vprintf+0x3be/0x3e0
  CPU: 3 PID: 140134 Comm: less Not tainted 5.13.0-rc1-ce2e73ce600a-req #184
  Hardware name: ASUS Q87M-E/Q87M-E, BIOS 1102 03/03/2014
  RIP: 0010:trace_check_vprintf+0x3be/0x3e0
  Code: <0f> 0b 44 8b 4c 24 1c e9 a9 fe ff ff c6 44 02 ff 00 49 8b 97 b0 20
  RSP: 0018:ffffa895cc37bcb0 EFLAGS: 00010282
  RAX: 0000000000000000 RBX: ffffa895cc37bd08 RCX: 0000000000000027
  RDX: 0000000000000027 RSI: 00000000ffffdfff RDI: ffff9766cfad74f8
  RBP: ffffffffc0a041d4 R08: ffff9766cfad74f0 R09: ffffa895cc37bad8
  R10: 0000000000000001 R11: 0000000000000001 R12: ffffffffc0a041d4
  R13: ffffffffc0f4dba8 R14: 0000000000000000 R15: ffff976409f2c000
  FS:  00007f92fa200740(0000) GS:ffff9766cfac0000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000559bd11b0000 CR3: 000000019fbaa002 CR4: 00000000001726e0
  Call Trace:
   trace_event_printf+0x5e/0x80
   trace_raw_output_kvm_nested_vmenter_failed+0x3a/0x60 [kvm]
   print_trace_line+0x1dd/0x4e0
   s_show+0x45/0x150
   seq_read_iter+0x2d5/0x4c0
   seq_read+0x106/0x150
   vfs_read+0x98/0x180
   ksys_read+0x5f/0xe0
   do_syscall_64+0x40/0xb0
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Cc: Steven Rostedt <rostedt@goodmis.org>
Fixes: 380e0055bc7e ("KVM: nVMX: trace nested VM-Enter failures detected by H/W")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Message-Id: <20210607175748.674002-1-seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kvm/trace.h |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/arch/x86/kvm/trace.h
+++ b/arch/x86/kvm/trace.h
@@ -1483,16 +1483,16 @@ TRACE_EVENT(kvm_nested_vmenter_failed,
 	TP_ARGS(msg, err),
 
 	TP_STRUCT__entry(
-		__field(const char *, msg)
+		__string(msg, msg)
 		__field(u32, err)
 	),
 
 	TP_fast_assign(
-		__entry->msg = msg;
+		__assign_str(msg, msg);
 		__entry->err = err;
 	),
 
-	TP_printk("%s%s", __entry->msg, !__entry->err ? "" :
+	TP_printk("%s%s", __get_str(msg), !__entry->err ? "" :
 		__print_symbolic(__entry->err, VMX_VMENTER_INSTRUCTION_ERRORS))
 );
 

[PATCH 5.4 71/84] IB/mlx5: Fix initializing CQ fragments buffer

[Greg Kroah-Hartman]

From: Alaa Hleihel <alaa@nvidia.com>

commit 2ba0aa2feebda680ecfc3c552e867cf4d1b05a3a upstream.

The function init_cq_frag_buf() can be called to initialize the current CQ
fragments buffer cq->buf, or the temporary cq->resize_buf that is filled
during CQ resize operation.

However, the offending commit started to use function get_cqe() for
getting the CQEs, the issue with this change is that get_cqe() always
returns CQEs from cq->buf, which leads us to initialize the wrong buffer,
and in case of enlarging the CQ we try to access elements beyond the size
of the current cq->buf and eventually hit a kernel panic.

 [exception RIP: init_cq_frag_buf+103]
  [ffff9f799ddcbcd8] mlx5_ib_resize_cq at ffffffffc0835d60 [mlx5_ib]
  [ffff9f799ddcbdb0] ib_resize_cq at ffffffffc05270df [ib_core]
  [ffff9f799ddcbdc0] llt_rdma_setup_qp at ffffffffc0a6a712 [llt]
  [ffff9f799ddcbe10] llt_rdma_cc_event_action at ffffffffc0a6b411 [llt]
  [ffff9f799ddcbe98] llt_rdma_client_conn_thread at ffffffffc0a6bb75 [llt]
  [ffff9f799ddcbec8] kthread at ffffffffa66c5da1
  [ffff9f799ddcbf50] ret_from_fork_nospec_begin at ffffffffa6d95ddd

Fix it by getting the needed CQE by calling mlx5_frag_buf_get_wqe() that
takes the correct source buffer as a parameter.

Fixes: 388ca8be0037 ("IB/mlx5: Implement fragmented completion queue (CQ)")
Link: https://lore.kernel.org/r/90a0e8c924093cfa50a482880ad7e7edb73dc19a.1623309971.git.leonro@nvidia.com
Signed-off-by: Alaa Hleihel <alaa@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/hw/mlx5/cq.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

--- a/drivers/infiniband/hw/mlx5/cq.c
+++ b/drivers/infiniband/hw/mlx5/cq.c
@@ -829,15 +829,14 @@ static void destroy_cq_user(struct mlx5_
 	ib_umem_release(cq->buf.umem);
 }
 
-static void init_cq_frag_buf(struct mlx5_ib_cq *cq,
-			     struct mlx5_ib_cq_buf *buf)
+static void init_cq_frag_buf(struct mlx5_ib_cq_buf *buf)
 {
 	int i;
 	void *cqe;
 	struct mlx5_cqe64 *cqe64;
 
 	for (i = 0; i < buf->nent; i++) {
-		cqe = get_cqe(cq, i);
+		cqe = mlx5_frag_buf_get_wqe(&buf->fbc, i);
 		cqe64 = buf->cqe_size == 64 ? cqe : cqe + 64;
 		cqe64->op_own = MLX5_CQE_INVALID << 4;
 	}
@@ -863,7 +862,7 @@ static int create_cq_kernel(struct mlx5_
 	if (err)
 		goto err_db;
 
-	init_cq_frag_buf(cq, &cq->buf);
+	init_cq_frag_buf(&cq->buf);
 
 	*inlen = MLX5_ST_SZ_BYTES(create_cq_in) +
 		 MLX5_FLD_SZ_BYTES(create_cq_in, pas[0]) *
@@ -1163,7 +1162,7 @@ static int resize_kernel(struct mlx5_ib_
 	if (err)
 		goto ex;
 
-	init_cq_frag_buf(cq, cq->resize_buf);
+	init_cq_frag_buf(cq->resize_buf);
 
 	return 0;
 

[PATCH 5.4 72/84] NFS: Fix a potential NULL dereference in nfs_get_client()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 09226e8303beeec10f2ff844d2e46d1371dc58e0 ]

None of the callers are expecting NULL returns from nfs_get_client() so
this code will lead to an Oops.  It's better to return an error
pointer.  I expect that this is dead code so hopefully no one is
affected.

Fixes: 31434f496abb ("nfs: check hostname in nfs_get_client")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/client.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index a05f77f9c21e..af838d1ed281 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -399,7 +399,7 @@ struct nfs_client *nfs_get_client(const struct nfs_client_initdata *cl_init)
 
 	if (cl_init->hostname == NULL) {
 		WARN_ON(1);
-		return NULL;
+		return ERR_PTR(-EINVAL);
 	}
 
 	/* see if the client already exists */
-- 
2.30.2

[PATCH 5.4 73/84] NFSv4: Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode()

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit dfe1fe75e00e4c724ede7b9e593f6f680e446c5f ]

If the inode is being evicted, but has to return a delegation first,
then it can cause a deadlock in the corner case where the server reboots
before the delegreturn completes, but while the call to iget5_locked() in
nfs4_opendata_get_inode() is waiting for the inode free to complete.
Since the open call still holds a session slot, the reboot recovery
cannot proceed.

In order to break the logjam, we can turn the delegation return into a
privileged operation for the case where we're evicting the inode. We
know that in that case, there can be no other state recovery operation
that conflicts.

Reported-by: zhangxiaoxu (A) <zhangxiaoxu5@huawei.com>
Fixes: 5fcdfacc01f3 ("NFSv4: Return delegations synchronously in evict_inode")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4_fs.h  |  1 +
 fs/nfs/nfs4proc.c | 12 +++++++++++-
 2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index c4a98cbda6dd..5708b5a636f1 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -203,6 +203,7 @@ struct nfs4_exception {
 	struct inode *inode;
 	nfs4_stateid *stateid;
 	long timeout;
+	unsigned char task_is_privileged : 1;
 	unsigned char delay : 1,
 		      recovering : 1,
 		      retry : 1;
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index ff54ba3c8247..ff48d7b23f07 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -581,6 +581,8 @@ int nfs4_handle_exception(struct nfs_server *server, int errorcode, struct nfs4_
 		goto out_retry;
 	}
 	if (exception->recovering) {
+		if (exception->task_is_privileged)
+			return -EDEADLOCK;
 		ret = nfs4_wait_clnt_recover(clp);
 		if (test_bit(NFS_MIG_FAILED, &server->mig_status))
 			return -EIO;
@@ -606,6 +608,8 @@ nfs4_async_handle_exception(struct rpc_task *task, struct nfs_server *server,
 		goto out_retry;
 	}
 	if (exception->recovering) {
+		if (exception->task_is_privileged)
+			return -EDEADLOCK;
 		rpc_sleep_on(&clp->cl_rpcwaitq, task, NULL);
 		if (test_bit(NFS4CLNT_MANAGER_RUNNING, &clp->cl_state) == 0)
 			rpc_wake_up_queued_task(&clp->cl_rpcwaitq, task);
@@ -6231,6 +6235,7 @@ static void nfs4_delegreturn_done(struct rpc_task *task, void *calldata)
 	struct nfs4_exception exception = {
 		.inode = data->inode,
 		.stateid = &data->stateid,
+		.task_is_privileged = data->args.seq_args.sa_privileged,
 	};
 
 	if (!nfs4_sequence_done(task, &data->res.seq_res))
@@ -6349,7 +6354,6 @@ static int _nfs4_proc_delegreturn(struct inode *inode, const struct cred *cred,
 	data = kzalloc(sizeof(*data), GFP_NOFS);
 	if (data == NULL)
 		return -ENOMEM;
-	nfs4_init_sequence(&data->args.seq_args, &data->res.seq_res, 1, 0);
 
 	nfs4_state_protect(server->nfs_client,
 			NFS_SP4_MACH_CRED_CLEANUP,
@@ -6377,6 +6381,12 @@ static int _nfs4_proc_delegreturn(struct inode *inode, const struct cred *cred,
 		}
 	}
 
+	if (!data->inode)
+		nfs4_init_sequence(&data->args.seq_args, &data->res.seq_res, 1,
+				   1);
+	else
+		nfs4_init_sequence(&data->args.seq_args, &data->res.seq_res, 1,
+				   0);
 	task_setup_data.callback_data = data;
 	msg.rpc_argp = &data->args;
 	msg.rpc_resp = &data->res;
-- 
2.30.2

[PATCH 5.4 74/84] perf session: Correct buffer copying when peeking events

[Greg Kroah-Hartman]

From: Leo Yan <leo.yan@linaro.org>

[ Upstream commit 197eecb6ecae0b04bd694432f640ff75597fed9c ]

When peeking an event, it has a short path and a long path.  The short
path uses the session pointer "one_mmap_addr" to directly fetch the
event; and the long path needs to read out the event header and the
following event data from file and fill into the buffer pointer passed
through the argument "buf".

The issue is in the long path that it copies the event header and event
data into the same destination address which pointer "buf", this means
the event header is overwritten.  We are just lucky to run into the
short path in most cases, so we don't hit the issue in the long path.

This patch adds the offset "hdr_sz" to the pointer "buf" when copying
the event data, so that it can reserve the event header which can be
used properly by its caller.

Fixes: 5a52f33adf02 ("perf session: Add perf_session__peek_event()")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210605052957.1070720-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/session.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index 56f3039fe2a7..8ff2c98e9032 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -1631,6 +1631,7 @@ int perf_session__peek_event(struct perf_session *session, off_t file_offset,
 	if (event->header.size < hdr_sz || event->header.size > buf_sz)
 		return -1;
 
+	buf += hdr_sz;
 	rest = event->header.size - hdr_sz;
 
 	if (readn(fd, buf, rest) != (ssize_t)rest)
-- 
2.30.2

[PATCH 5.4 75/84] kvm: fix previous commit for 32-bit builds

[Greg Kroah-Hartman]

From: Paolo Bonzini <pbonzini@redhat.com>

commit 4422829e8053068e0225e4d0ef42dc41ea7c9ef5 upstream.

array_index_nospec does not work for uint64_t on 32-bit builds.
However, the size of a memory slot must be less than 20 bits wide
on those system, since the memory slot must fit in the user
address space.  So just store it in an unsigned long.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/kvm_host.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -1051,8 +1051,8 @@ __gfn_to_hva_memslot(struct kvm_memory_s
 	 * table walks, do not let the processor speculate loads outside
 	 * the guest's registered memslots.
 	 */
-	unsigned long offset = array_index_nospec(gfn - slot->base_gfn,
-						  slot->npages);
+	unsigned long offset = gfn - slot->base_gfn;
+	offset = array_index_nospec(offset, slot->npages);
 	return slot->userspace_addr + offset * PAGE_SIZE;
 }
 

[PATCH 5.4 76/84] NFS: Fix use-after-free in nfs4_init_client()

[Greg Kroah-Hartman]

From: Anna Schumaker <Anna.Schumaker@Netapp.com>

commit 476bdb04c501fc64bf3b8464ffddefc8dbe01577 upstream.

KASAN reports a use-after-free when attempting to mount two different
exports through two different NICs that belong to the same server.

Olga was able to hit this with kernels starting somewhere between 5.7
and 5.10, but I traced the patch that introduced the clear_bit() call to
4.13. So something must have changed in the refcounting of the clp
pointer to make this call to nfs_put_client() the very last one.

Fixes: 8dcbec6d20 ("NFSv41: Handle EXCHID4_FLAG_CONFIRMED_R during NFSv4.1 migration")
Cc: stable@vger.kernel.org # 4.13+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfs/nfs4client.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -435,8 +435,8 @@ struct nfs_client *nfs4_init_client(stru
 		 */
 		nfs_mark_client_ready(clp, -EPERM);
 	}
-	nfs_put_client(clp);
 	clear_bit(NFS_CS_TSM_POSSIBLE, &clp->cl_flags);
+	nfs_put_client(clp);
 	return old;
 
 error:

[PATCH 5.4 77/84] NFSv4: Fix second deadlock in nfs4_evict_inode()

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

commit c3aba897c6e67fa464ec02b1f17911577d619713 upstream.

If the inode is being evicted but has to return a layout first, then
that too can cause a deadlock in the corner case where the server
reboots.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfs/nfs4proc.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -9342,15 +9342,20 @@ int nfs4_proc_layoutreturn(struct nfs4_l
 			&task_setup_data.rpc_client, &msg);
 
 	dprintk("--> %s\n", __func__);
+	lrp->inode = nfs_igrab_and_active(lrp->args.inode);
 	if (!sync) {
-		lrp->inode = nfs_igrab_and_active(lrp->args.inode);
 		if (!lrp->inode) {
 			nfs4_layoutreturn_release(lrp);
 			return -EAGAIN;
 		}
 		task_setup_data.flags |= RPC_TASK_ASYNC;
 	}
-	nfs4_init_sequence(&lrp->args.seq_args, &lrp->res.seq_res, 1, 0);
+	if (!lrp->inode)
+		nfs4_init_sequence(&lrp->args.seq_args, &lrp->res.seq_res, 1,
+				   1);
+	else
+		nfs4_init_sequence(&lrp->args.seq_args, &lrp->res.seq_res, 1,
+				   0);
 	task = rpc_run_task(&task_setup_data);
 	if (IS_ERR(task))
 		return PTR_ERR(task);

[PATCH 5.4 78/84] NFSv4: nfs4_proc_set_acl needs to restore NFS_CAP_UIDGID_NOMAP on error.

[Greg Kroah-Hartman]

From: Dai Ngo <dai.ngo@oracle.com>

commit f8849e206ef52b584cd9227255f4724f0cc900bb upstream.

Currently if __nfs4_proc_set_acl fails with NFS4ERR_BADOWNER it
re-enables the idmapper by clearing NFS_CAP_UIDGID_NOMAP before
retrying again. The NFS_CAP_UIDGID_NOMAP remains cleared even if
the retry fails. This causes problem for subsequent setattr
requests for v4 server that does not have idmapping configured.

This patch modifies nfs4_proc_set_acl to detect NFS4ERR_BADOWNER
and NFS4ERR_BADNAME and skips the retry, since the kernel isn't
involved in encoding the ACEs, and return -EINVAL.

Steps to reproduce the problem:

 # mount -o vers=4.1,sec=sys server:/export/test /tmp/mnt
 # touch /tmp/mnt/file1
 # chown 99 /tmp/mnt/file1
 # nfs4_setfacl -a A::unknown.user@xyz.com:wrtncy /tmp/mnt/file1
 Failed setxattr operation: Invalid argument
 # chown 99 /tmp/mnt/file1
 chown: changing ownership of ‘/tmp/mnt/file1’: Invalid argument
 # umount /tmp/mnt
 # mount -o vers=4.1,sec=sys server:/export/test /tmp/mnt
 # chown 99 /tmp/mnt/file1
 #

v2: detect NFS4ERR_BADOWNER and NFS4ERR_BADNAME and skip retry
       in nfs4_proc_set_acl.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfs/nfs4proc.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -5799,6 +5799,14 @@ static int nfs4_proc_set_acl(struct inod
 	do {
 		err = __nfs4_proc_set_acl(inode, buf, buflen);
 		trace_nfs4_set_acl(inode, err);
+		if (err == -NFS4ERR_BADOWNER || err == -NFS4ERR_BADNAME) {
+			/*
+			 * no need to retry since the kernel
+			 * isn't involved in encoding the ACEs.
+			 */
+			err = -EINVAL;
+			break;
+		}
 		err = nfs4_handle_exception(NFS_SERVER(inode), err,
 				&exception);
 	} while (exception.retry);

[PATCH 5.4 79/84] scsi: core: Fix error handling of scsi_host_alloc()

[Greg Kroah-Hartman]

From: Ming Lei <ming.lei@redhat.com>

commit 66a834d092930cf41d809c0e989b13cd6f9ca006 upstream.

After device is initialized via device_initialize(), or its name is set via
dev_set_name(), the device has to be freed via put_device().  Otherwise
device name will be leaked because it is allocated dynamically in
dev_set_name().

Fix the leak by replacing kfree() with put_device(). Since
scsi_host_dev_release() properly handles IDA and kthread removal, remove
special-casing these from the error handling as well.

Link: https://lore.kernel.org/r/20210602133029.2864069-2-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/hosts.c |   23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)

--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -389,8 +389,10 @@ struct Scsi_Host *scsi_host_alloc(struct
 	mutex_init(&shost->scan_mutex);
 
 	index = ida_simple_get(&host_index_ida, 0, 0, GFP_KERNEL);
-	if (index < 0)
-		goto fail_kfree;
+	if (index < 0) {
+		kfree(shost);
+		return NULL;
+	}
 	shost->host_no = index;
 
 	shost->dma_channel = 0xff;
@@ -482,7 +484,7 @@ struct Scsi_Host *scsi_host_alloc(struct
 		shost_printk(KERN_WARNING, shost,
 			"error handler thread failed to spawn, error = %ld\n",
 			PTR_ERR(shost->ehandler));
-		goto fail_index_remove;
+		goto fail;
 	}
 
 	shost->tmf_work_q = alloc_workqueue("scsi_tmf_%d",
@@ -491,17 +493,18 @@ struct Scsi_Host *scsi_host_alloc(struct
 	if (!shost->tmf_work_q) {
 		shost_printk(KERN_WARNING, shost,
 			     "failed to create tmf workq\n");
-		goto fail_kthread;
+		goto fail;
 	}
 	scsi_proc_hostdir_add(shost->hostt);
 	return shost;
+ fail:
+	/*
+	 * Host state is still SHOST_CREATED and that is enough to release
+	 * ->shost_gendev. scsi_host_dev_release() will free
+	 * dev_name(&shost->shost_dev).
+	 */
+	put_device(&shost->shost_gendev);
 
- fail_kthread:
-	kthread_stop(shost->ehandler);
- fail_index_remove:
-	ida_simple_remove(&host_index_ida, shost->host_no);
- fail_kfree:
-	kfree(shost);
 	return NULL;
 }
 EXPORT_SYMBOL(scsi_host_alloc);

[PATCH 5.4 80/84] scsi: core: Fix failure handling of scsi_add_host_with_dma()

[Greg Kroah-Hartman]

From: Ming Lei <ming.lei@redhat.com>

commit 3719f4ff047e20062b8314c23ec3cab84d74c908 upstream.

When scsi_add_host_with_dma() returns failure, the caller will call
scsi_host_put(shost) to release everything allocated for this host
instance. Consequently we can't also free allocated stuff in
scsi_add_host_with_dma(), otherwise we will end up with a double free.

Strictly speaking, host resource allocations should have been done in
scsi_host_alloc(). However, the allocations may need information which is
not yet provided by the driver when that function is called. So leave the
allocations where they are but rely on host device's release handler to
free resources.

Link: https://lore.kernel.org/r/20210602133029.2864069-3-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/hosts.c |   14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -275,23 +275,22 @@ int scsi_add_host_with_dma(struct Scsi_H
 					shost->work_q_name);
 		if (!shost->work_q) {
 			error = -EINVAL;
-			goto out_free_shost_data;
+			goto out_del_dev;
 		}
 	}
 
 	error = scsi_sysfs_add_host(shost);
 	if (error)
-		goto out_destroy_host;
+		goto out_del_dev;
 
 	scsi_proc_host_add(shost);
 	scsi_autopm_put_host(shost);
 	return error;
 
- out_destroy_host:
-	if (shost->work_q)
-		destroy_workqueue(shost->work_q);
- out_free_shost_data:
-	kfree(shost->shost_data);
+	/*
+	 * Any host allocation in this function will be freed in
+	 * scsi_host_dev_release().
+	 */
  out_del_dev:
 	device_del(&shost->shost_dev);
  out_del_gendev:
@@ -301,7 +300,6 @@ int scsi_add_host_with_dma(struct Scsi_H
 	pm_runtime_disable(&shost->shost_gendev);
 	pm_runtime_set_suspended(&shost->shost_gendev);
 	pm_runtime_put_noidle(&shost->shost_gendev);
-	scsi_mq_destroy_tags(shost);
  fail:
 	return error;
 }

[PATCH 5.4 81/84] scsi: core: Put .shost_dev in failure path if host state changes to RUNNING

[Greg Kroah-Hartman]

From: Ming Lei <ming.lei@redhat.com>

commit 11714026c02d613c30a149c3f4c4a15047744529 upstream.

scsi_host_dev_release() only frees dev_name when host state is
SHOST_CREATED. After host state has changed to SHOST_RUNNING,
scsi_host_dev_release() no longer cleans up.

Fix this by doing a put_device(&shost->shost_dev) in the failure path when
host state is SHOST_RUNNING. Move get_device(&shost->shost_gendev) before
device_add(&shost->shost_dev) so that scsi_host_cls_release() can do a put
on this reference.

Link: https://lore.kernel.org/r/20210602133029.2864069-4-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.de>
Reported-by: John Garry <john.garry@huawei.com>
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/hosts.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -253,12 +253,11 @@ int scsi_add_host_with_dma(struct Scsi_H
 
 	device_enable_async_suspend(&shost->shost_dev);
 
+	get_device(&shost->shost_gendev);
 	error = device_add(&shost->shost_dev);
 	if (error)
 		goto out_del_gendev;
 
-	get_device(&shost->shost_gendev);
-
 	if (shost->transportt->host_size) {
 		shost->shost_data = kzalloc(shost->transportt->host_size,
 					 GFP_KERNEL);
@@ -294,6 +293,11 @@ int scsi_add_host_with_dma(struct Scsi_H
  out_del_dev:
 	device_del(&shost->shost_dev);
  out_del_gendev:
+	/*
+	 * Host state is SHOST_RUNNING so we have to explicitly release
+	 * ->shost_dev.
+	 */
+	put_device(&shost->shost_dev);
 	device_del(&shost->shost_gendev);
  out_disable_runtime_pm:
 	device_disable_async_suspend(&shost->shost_gendev);

[PATCH 5.4 82/84] scsi: core: Only put parent device if host state differs from SHOST_CREATED

[Greg Kroah-Hartman]

From: Ming Lei <ming.lei@redhat.com>

commit 1e0d4e6225996f05271de1ebcb1a7c9381af0b27 upstream.

get_device(shost->shost_gendev.parent) is called after host state has
switched to SHOST_RUNNING. scsi_host_dev_release() shouldn't release the
parent device if host state is still SHOST_CREATED.

Link: https://lore.kernel.org/r/20210602133029.2864069-5-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/hosts.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -344,7 +344,7 @@ static void scsi_host_dev_release(struct
 
 	ida_simple_remove(&host_index_ida, shost->host_no);
 
-	if (parent)
+	if (shost->shost_state != SHOST_CREATED)
 		put_device(parent);
 	kfree(shost);
 }

[PATCH 5.4 83/84] ftrace: Do not blindly read the ip address in ftrace_bug()

[Greg Kroah-Hartman]

From: Steven Rostedt (VMware) <rostedt@goodmis.org>

commit 6c14133d2d3f768e0a35128faac8aa6ed4815051 upstream.

It was reported that a bug on arm64 caused a bad ip address to be used for
updating into a nop in ftrace_init(), but the error path (rightfully)
returned -EINVAL and not -EFAULT, as the bug caused more than one error to
occur. But because -EINVAL was returned, the ftrace_bug() tried to report
what was at the location of the ip address, and read it directly. This
caused the machine to panic, as the ip was not pointing to a valid memory
address.

Instead, read the ip address with copy_from_kernel_nofault() to safely
access the memory, and if it faults, report that the address faulted,
otherwise report what was in that location.

Link: https://lore.kernel.org/lkml/20210607032329.28671-1-mark-pk.tsai@mediatek.com/

Cc: stable@vger.kernel.org
Fixes: 05736a427f7e1 ("ftrace: warn on failure to disable mcount callers")
Reported-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/ftrace.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -1953,12 +1953,18 @@ static int ftrace_hash_ipmodify_update(s
 
 static void print_ip_ins(const char *fmt, const unsigned char *p)
 {
+	char ins[MCOUNT_INSN_SIZE];
 	int i;
 
+	if (probe_kernel_read(ins, p, MCOUNT_INSN_SIZE)) {
+		printk(KERN_CONT "%s[FAULT] %px\n", fmt, p);
+		return;
+	}
+
 	printk(KERN_CONT "%s", fmt);
 
 	for (i = 0; i < MCOUNT_INSN_SIZE; i++)
-		printk(KERN_CONT "%s%02x", i ? ":" : "", p[i]);
+		printk(KERN_CONT "%s%02x", i ? ":" : "", ins[i]);
 }
 
 enum ftrace_bug_type ftrace_bug_type;

[PATCH 5.4 84/84] tracing: Correct the length check which causes memory corruption

[Greg Kroah-Hartman]

From: Liangyan <liangyan.peng@linux.alibaba.com>

commit 3e08a9f9760f4a70d633c328a76408e62d6f80a3 upstream.

We've suffered from severe kernel crashes due to memory corruption on
our production environment, like,

Call Trace:
[1640542.554277] general protection fault: 0000 [#1] SMP PTI
[1640542.554856] CPU: 17 PID: 26996 Comm: python Kdump: loaded Tainted:G
[1640542.556629] RIP: 0010:kmem_cache_alloc+0x90/0x190
[1640542.559074] RSP: 0018:ffffb16faa597df8 EFLAGS: 00010286
[1640542.559587] RAX: 0000000000000000 RBX: 0000000000400200 RCX:
0000000006e931bf
[1640542.560323] RDX: 0000000006e931be RSI: 0000000000400200 RDI:
ffff9a45ff004300
[1640542.560996] RBP: 0000000000400200 R08: 0000000000023420 R09:
0000000000000000
[1640542.561670] R10: 0000000000000000 R11: 0000000000000000 R12:
ffffffff9a20608d
[1640542.562366] R13: ffff9a45ff004300 R14: ffff9a45ff004300 R15:
696c662f65636976
[1640542.563128] FS:  00007f45d7c6f740(0000) GS:ffff9a45ff840000(0000)
knlGS:0000000000000000
[1640542.563937] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1640542.564557] CR2: 00007f45d71311a0 CR3: 000000189d63e004 CR4:
00000000003606e0
[1640542.565279] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[1640542.566069] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[1640542.566742] Call Trace:
[1640542.567009]  anon_vma_clone+0x5d/0x170
[1640542.567417]  __split_vma+0x91/0x1a0
[1640542.567777]  do_munmap+0x2c6/0x320
[1640542.568128]  vm_munmap+0x54/0x70
[1640542.569990]  __x64_sys_munmap+0x22/0x30
[1640542.572005]  do_syscall_64+0x5b/0x1b0
[1640542.573724]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[1640542.575642] RIP: 0033:0x7f45d6e61e27

James Wang has reproduced it stably on the latest 4.19 LTS.
After some debugging, we finally proved that it's due to ftrace
buffer out-of-bound access using a debug tool as follows:
[   86.775200] BUG: Out-of-bounds write at addr 0xffff88aefe8b7000
[   86.780806]  no_context+0xdf/0x3c0
[   86.784327]  __do_page_fault+0x252/0x470
[   86.788367]  do_page_fault+0x32/0x140
[   86.792145]  page_fault+0x1e/0x30
[   86.795576]  strncpy_from_unsafe+0x66/0xb0
[   86.799789]  fetch_memory_string+0x25/0x40
[   86.804002]  fetch_deref_string+0x51/0x60
[   86.808134]  kprobe_trace_func+0x32d/0x3a0
[   86.812347]  kprobe_dispatcher+0x45/0x50
[   86.816385]  kprobe_ftrace_handler+0x90/0xf0
[   86.820779]  ftrace_ops_assist_func+0xa1/0x140
[   86.825340]  0xffffffffc00750bf
[   86.828603]  do_sys_open+0x5/0x1f0
[   86.832124]  do_syscall_64+0x5b/0x1b0
[   86.835900]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

commit b220c049d519 ("tracing: Check length before giving out
the filter buffer") adds length check to protect trace data
overflow introduced in 0fc1b09ff1ff, seems that this fix can't prevent
overflow entirely, the length check should also take the sizeof
entry->array[0] into account, since this array[0] is filled the
length of trace data and occupy addtional space and risk overflow.

Link: https://lkml.kernel.org/r/20210607125734.1770447-1-liangyan.peng@linux.alibaba.com

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: b220c049d519 ("tracing: Check length before giving out the filter buffer")
Reviewed-by: Xunlei Pang <xlpang@linux.alibaba.com>
Reviewed-by: yinbinbin <yinbinbin@alibabacloud.com>
Reviewed-by: Wetp Zhang <wetp.zy@linux.alibaba.com>
Tested-by: James Wang <jnwang@linux.alibaba.com>
Signed-off-by: Liangyan <liangyan.peng@linux.alibaba.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/trace.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2487,7 +2487,7 @@ trace_event_buffer_lock_reserve(struct r
 	    (entry = this_cpu_read(trace_buffered_event))) {
 		/* Try to use the per cpu buffer first */
 		val = this_cpu_inc_return(trace_buffered_event_cnt);
-		if ((len < (PAGE_SIZE - sizeof(*entry))) && val == 1) {
+		if ((len < (PAGE_SIZE - sizeof(*entry) - sizeof(entry->array[0]))) && val == 1) {
 			trace_event_setup(entry, type, flags, pc);
 			entry->array[0] = len;
 			return entry;

Re: [PATCH 5.4 00/84] 5.4.126-rc1 review

[Florian Fainelli]

On 6/14/2021 3:26 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.126 release.
> There are 84 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Jun 2021 10:26:30 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.126-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.4 00/84] 5.4.126-rc1 review

[Shuah Khan]

On 6/14/21 4:26 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.126 release.
> There are 84 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Jun 2021 10:26:30 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.126-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.4 00/84] 5.4.126-rc1 review

[Samuel Zou]

On 2021/6/14 18:26, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.126 release.
> There are 84 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Jun 2021 10:26:30 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.126-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested on arm64 and x86 for 5.4.126-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.4.y
Version: 5.4.126-rc1
Commit: 4a2dfe908c1ec200cbcd6d22b4d37a52086af057
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8905
passed: 8905
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8905
passed: 8905
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>

Re: [PATCH 5.4 00/84] 5.4.126-rc1 review

[Naresh Kamboju]

On Mon, 14 Jun 2021 at 16:08, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.4.126 release.
> There are 84 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 16 Jun 2021 10:26:30 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.126-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.4.126-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.4.y
* git commit: 4a2dfe908c1ec200cbcd6d22b4d37a52086af057
* git describe: v5.4.125-85-g4a2dfe908c1e
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.125-85-g4a2dfe908c1e

## No regressions (compared to v5.4.125)

## No fixes (compared to v5.4.125)


## Test result summary
 total: 67279, pass: 53957, fail: 1343, skip: 11000, xfail: 979,

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 192 total, 192 passed, 0 failed
* arm64: 26 total, 26 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 15 total, 15 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 45 total, 45 passed, 0 failed
* parisc: 9 total, 9 passed, 0 failed
* powerpc: 27 total, 27 passed, 0 failed
* riscv: 21 total, 21 passed, 0 failed
* s390: 9 total, 9 passed, 0 failed
* sh: 18 total, 18 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 26 total, 26 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-
* kselftest-android
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.4 00/84] 5.4.126-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Mon, Jun 14, 2021 at 12:26:38PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.126 release.
> There are 84 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Jun 2021 10:26:30 +0000.
> Anything received after that time might be too late.

Build test:
mips (gcc version 11.1.1 20210523): 65 configs -> no failure
arm (gcc version 11.1.1 20210523): 107 configs -> no new failure
arm64 (gcc version 11.1.1 20210523): 2 configs -> no failure
x86_64 (gcc version 10.2.1 20210110): 2 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression.


Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip

Re: [PATCH 5.4 00/84] 5.4.126-rc1 review

[Guenter Roeck]

On Mon, Jun 14, 2021 at 12:26:38PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.126 release.
> There are 84 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Jun 2021 10:26:30 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 157 pass: 157 fail: 0
Qemu test results:
	total: 428 pass: 428 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter