* [RESEND PATCH v3] arm64: dts: mediatek: align GPIO hog names with dtschema
@ 2020-10-02 16:39 Krzysztof Kozlowski
2020-10-29 15:52 ` Matthias Brugger
0 siblings, 1 reply; 2+ messages in thread
From: Krzysztof Kozlowski @ 2020-10-02 16:39 UTC (permalink / raw)
To: Matthias Brugger, Rob Herring, linux-arm-kernel, linux-mediatek,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The convention for node names is to use hyphens, not underscores.
dtschema for pca95xx expects GPIO hogs to end with 'hog' suffix.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
.../boot/dts/mediatek/pumpkin-common.dtsi | 26 +++++++++----------
1 file changed, 13 insertions(+), 13 deletions(-)
The dt-schema changes were applied.
diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index 29d8cf6df46b..351a1905a074 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -63,91 +63,91 @@
gpio-controller;
#gpio-cells = <2>;
- eint20_mux_sel0 {
+ eint20-mux-sel0-hog {
gpio-hog;
gpios = <0 0>;
input;
line-name = "eint20_mux_sel0";
};
- expcon_mux_sel1 {
+ expcon-mux-sel1-hog {
gpio-hog;
gpios = <1 0>;
input;
line-name = "expcon_mux_sel1";
};
- mrg_di_mux_sel2 {
+ mrg-di-mux-sel2-hog {
gpio-hog;
gpios = <2 0>;
input;
line-name = "mrg_di_mux_sel2";
};
- sd_sdio_mux_sel3 {
+ sd-sdio-mux-sel3-hog {
gpio-hog;
gpios = <3 0>;
input;
line-name = "sd_sdio_mux_sel3";
};
- sd_sdio_mux_ctrl7 {
+ sd-sdio-mux-ctrl7-hog {
gpio-hog;
gpios = <7 0>;
output-low;
line-name = "sd_sdio_mux_ctrl7";
};
- hw_id0 {
+ hw-id0-hog {
gpio-hog;
gpios = <8 0>;
input;
line-name = "hw_id0";
};
- hw_id1 {
+ hw-id1-hog {
gpio-hog;
gpios = <9 0>;
input;
line-name = "hw_id1";
};
- hw_id2 {
+ hw-id2-hog {
gpio-hog;
gpios = <10 0>;
input;
line-name = "hw_id2";
};
- fg_int_n {
+ fg-int-n-hog {
gpio-hog;
gpios = <11 0>;
input;
line-name = "fg_int_n";
};
- usba_pwr_en {
+ usba-pwr-en-hog {
gpio-hog;
gpios = <12 0>;
output-high;
line-name = "usba_pwr_en";
};
- wifi_3v3_pg {
+ wifi-3v3-pg-hog {
gpio-hog;
gpios = <13 0>;
input;
line-name = "wifi_3v3_pg";
};
- cam_rst {
+ cam-rst-hog {
gpio-hog;
gpios = <14 0>;
output-low;
line-name = "cam_rst";
};
- cam_pwdn {
+ cam-pwdn-hog {
gpio-hog;
gpios = <15 0>;
output-low;
--
2.17.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [RESEND PATCH v3] arm64: dts: mediatek: align GPIO hog names with dtschema
2020-10-02 16:39 [RESEND PATCH v3] arm64: dts: mediatek: align GPIO hog names with dtschema Krzysztof Kozlowski
@ 2020-10-29 15:52 ` Matthias Brugger
0 siblings, 0 replies; 2+ messages in thread
From: Matthias Brugger @ 2020-10-29 15:52 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, linux-arm-kernel,
linux-mediatek, devicetree, linux-kernel
On 02/10/2020 18:39, Krzysztof Kozlowski wrote:
> The convention for node names is to use hyphens, not underscores.
> dtschema for pca95xx expects GPIO hogs to end with 'hog' suffix.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Pushed to v5.10-next/dts64
Thanks!
> ---
> .../boot/dts/mediatek/pumpkin-common.dtsi | 26 +++++++++----------
> 1 file changed, 13 insertions(+), 13 deletions(-)
>
> The dt-schema changes were applied.
>
> diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
> index 29d8cf6df46b..351a1905a074 100644
> --- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
> @@ -63,91 +63,91 @@
> gpio-controller;
> #gpio-cells = <2>;
>
> - eint20_mux_sel0 {
> + eint20-mux-sel0-hog {
> gpio-hog;
> gpios = <0 0>;
> input;
> line-name = "eint20_mux_sel0";
> };
>
> - expcon_mux_sel1 {
> + expcon-mux-sel1-hog {
> gpio-hog;
> gpios = <1 0>;
> input;
> line-name = "expcon_mux_sel1";
> };
>
> - mrg_di_mux_sel2 {
> + mrg-di-mux-sel2-hog {
> gpio-hog;
> gpios = <2 0>;
> input;
> line-name = "mrg_di_mux_sel2";
> };
>
> - sd_sdio_mux_sel3 {
> + sd-sdio-mux-sel3-hog {
> gpio-hog;
> gpios = <3 0>;
> input;
> line-name = "sd_sdio_mux_sel3";
> };
>
> - sd_sdio_mux_ctrl7 {
> + sd-sdio-mux-ctrl7-hog {
> gpio-hog;
> gpios = <7 0>;
> output-low;
> line-name = "sd_sdio_mux_ctrl7";
> };
>
> - hw_id0 {
> + hw-id0-hog {
> gpio-hog;
> gpios = <8 0>;
> input;
> line-name = "hw_id0";
> };
>
> - hw_id1 {
> + hw-id1-hog {
> gpio-hog;
> gpios = <9 0>;
> input;
> line-name = "hw_id1";
> };
>
> - hw_id2 {
> + hw-id2-hog {
> gpio-hog;
> gpios = <10 0>;
> input;
> line-name = "hw_id2";
> };
>
> - fg_int_n {
> + fg-int-n-hog {
> gpio-hog;
> gpios = <11 0>;
> input;
> line-name = "fg_int_n";
> };
>
> - usba_pwr_en {
> + usba-pwr-en-hog {
> gpio-hog;
> gpios = <12 0>;
> output-high;
> line-name = "usba_pwr_en";
> };
>
> - wifi_3v3_pg {
> + wifi-3v3-pg-hog {
> gpio-hog;
> gpios = <13 0>;
> input;
> line-name = "wifi_3v3_pg";
> };
>
> - cam_rst {
> + cam-rst-hog {
> gpio-hog;
> gpios = <14 0>;
> output-low;
> line-name = "cam_rst";
> };
>
> - cam_pwdn {
> + cam-pwdn-hog {
> gpio-hog;
> gpios = <15 0>;
> output-low;
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-10-29 15:52 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-02 16:39 [RESEND PATCH v3] arm64: dts: mediatek: align GPIO hog names with dtschema Krzysztof Kozlowski
2020-10-29 15:52 ` Matthias Brugger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).