linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To: Mark Brown <broonie@kernel.org>, Lee Jones <lee.jones@linaro.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 02/21] staging: hikey9xx: hisilicon,hi6421-spmi-pmic.yaml: simplify props
Date: Tue, 19 Jan 2021 17:10:28 +0100	[thread overview]
Message-ID: <907c4757c16e7642be9948fbe01a390366c503a8.1611072387.git.mchehab+huawei@kernel.org> (raw)
In-Reply-To: <cover.1611072387.git.mchehab+huawei@kernel.org>

As all regulator-specific properties got moved to be part of the
driver, remove them from the DT spec.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../hikey9xx/hisilicon,hi6421-spmi-pmic.yaml  | 106 +++++++-----------
 1 file changed, 40 insertions(+), 66 deletions(-)

diff --git a/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml b/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
index 80e74c261e05..f385146d2bd1 100644
--- a/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
+++ b/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
@@ -55,47 +55,6 @@ properties:
 
         $ref: "/schemas/regulator/regulator.yaml#"
 
-        properties:
-          reg:
-            description: Enable register.
-
-          '#address-cells':
-            const: 1
-
-          '#size-cells':
-            const: 0
-
-          vsel-reg:
-            description: Voltage selector register.
-
-          enable-mask:
-            description: Bitmask used to enable the regulator.
-
-          voltage-table:
-            description: Table with the selector items for the voltage regulator.
-            minItems: 2
-            maxItems: 16
-
-          off-on-delay-us:
-            description: Time required for changing state to enabled in microseconds.
-
-          startup-delay-us:
-            description: Startup time in microseconds.
-
-          idle-mode-mask:
-            description: Bitmask used to put the regulator on idle mode.
-
-          eco-microamp:
-            description: Maximum current while on idle mode.
-
-        required:
-          - reg
-          - vsel-reg
-          - enable-mask
-          - voltage-table
-          - off-on-delay-us
-          - startup-delay-us
-
 required:
   - compatible
   - reg
@@ -117,43 +76,58 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        ldo3: ldo3@16 {
-          reg = <0x16>;
-          vsel-reg = <0x51>;
-
+        ldo3: LDO3 {
           regulator-name = "ldo3";
           regulator-min-microvolt = <1500000>;
           regulator-max-microvolt = <2000000>;
           regulator-boot-on;
-
-          enable-mask = <0x01>;
-
-          voltage-table = <1500000>, <1550000>, <1600000>, <1650000>,
-                          <1700000>, <1725000>, <1750000>, <1775000>,
-                          <1800000>, <1825000>, <1850000>, <1875000>,
-                          <1900000>, <1925000>, <1950000>, <2000000>;
-          off-on-delay-us = <20000>;
-          startup-delay-us = <120>;
         };
 
-        ldo4: ldo4@17 { /* 40 PIN */
-          reg = <0x17>;
-          vsel-reg = <0x52>;
-
+        ldo4: LDO4 {
           regulator-name = "ldo4";
           regulator-min-microvolt = <1725000>;
           regulator-max-microvolt = <1900000>;
           regulator-boot-on;
+        };
 
-          enable-mask = <0x01>;
-          idle-mode-mask = <0x10>;
-          eco-microamp = <10000>;
+        ldo9: LDO9 {
+          regulator-name = "ldo9";
+          regulator-min-microvolt = <1750000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-boot-on;
+        };
 
-          hi6421-vsel = <0x52 0x07>;
-          voltage-table = <1725000>, <1750000>, <1775000>, <1800000>,
-                          <1825000>, <1850000>, <1875000>, <1900000>;
-          off-on-delay-us = <20000>;
-          startup-delay-us = <120>;
+        ldo15: LDO15 {
+          regulator-name = "ldo15";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <3000000>;
+          regulator-always-on;
+        };
+
+        ldo16: LDO16 {
+          regulator-name = "ldo16";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <3000000>;
+          regulator-boot-on;
+        };
+
+        ldo17: LDO17 {
+          regulator-name = "ldo17";
+          regulator-min-microvolt = <2500000>;
+          regulator-max-microvolt = <3300000>;
+        };
+
+        ldo33: LDO33 {
+          regulator-name = "ldo33";
+          regulator-min-microvolt = <2500000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-boot-on;
+        };
+
+        ldo34: LDO34 {
+          regulator-name = "ldo34";
+          regulator-min-microvolt = <2600000>;
+          regulator-max-microvolt = <3300000>;
         };
       };
     };
-- 
2.29.2


  parent reply	other threads:[~2021-01-19 18:27 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-19 16:10 [PATCH v4 00/21] Move Hisilicon 6421v600 SPMI driver set out of staging Mauro Carvalho Chehab
2021-01-19 16:10 ` [PATCH v4 01/21] staging: hikey9xx: hisilicon,hisi-spmi-controller.yaml fix bindings Mauro Carvalho Chehab
2021-01-19 16:10 ` Mauro Carvalho Chehab [this message]
2021-01-19 16:10 ` [PATCH v4 03/21] staging: hikey9xx: hisi-spmi-controller: clean sparse warnings Mauro Carvalho Chehab
2021-01-19 16:10 ` [PATCH v4 04/21] staging: hikey9xx: hi6421v600-regulator: do some cleanups Mauro Carvalho Chehab
2021-01-19 16:10 ` [PATCH v4 05/21] staging: hikey9xx: hi6421v600-regulator: move LDO config from DT Mauro Carvalho Chehab
2021-01-19 16:10 ` [PATCH v4 06/21] staging: hikey9xx: hi6421v600-regulator: cleanup debug msgs Mauro Carvalho Chehab
2021-01-19 16:10 ` [PATCH v4 07/21] staging: hikey9xx: hi6421v600-regulator: get rid of an static data Mauro Carvalho Chehab
2021-01-19 16:10 ` [PATCH v4 08/21] staging: hikey9xx: hi6421v600-regulator: do some cleanups Mauro Carvalho Chehab
2021-01-19 16:10 ` [PATCH v4 09/21] staging: hikey9xx: hi6421v600-regulator: update copyright Mauro Carvalho Chehab
2021-01-19 16:10 ` [PATCH v4 10/21] staging: hikey9xx: hi6421v600-regulator: fix delay logic Mauro Carvalho Chehab
2021-01-19 16:10 ` [PATCH v4 11/21] staging: hikey9xx: hi6421v600-regulator: cleanup comments Mauro Carvalho Chehab
2021-01-19 16:10 ` [PATCH v4 12/21] staging: hikey9xx: hi6421v600-regulator: fix get_optimum_mode Mauro Carvalho Chehab
2021-01-19 16:10 ` [PATCH v4 13/21] staging: hikey9xx: hisilicon,hi6421-spmi-pmic.yaml: cleanup a warning Mauro Carvalho Chehab
2021-01-19 16:10 ` [PATCH v4 14/21] staging: hikey9xx: spmi driver: convert to regmap Mauro Carvalho Chehab
2021-01-19 16:10 ` [PATCH v4 15/21] staging: hikey9xx: hi6421-spmi-pmic: update copyright Mauro Carvalho Chehab
2021-01-19 16:10 ` [PATCH v4 16/21] staging: hikey9xx: simplify includes Mauro Carvalho Chehab
2021-01-19 16:10 ` [PATCH v4 17/21] spmi: hisi-spmi-controller: move driver from staging Mauro Carvalho Chehab
2021-02-05 22:19   ` Rob Herring
2021-03-25 13:47     ` Mauro Carvalho Chehab
2021-01-19 16:10 ` [PATCH v4 18/21] mfd: hi6421-spmi-pmic: " Mauro Carvalho Chehab
2021-01-27 11:05   ` Lee Jones
2021-02-05 22:26   ` Rob Herring
2021-02-05 22:26   ` Rob Herring
2021-01-19 16:10 ` [PATCH v4 19/21] regulator: hi6421v600-regulator: move it " Mauro Carvalho Chehab
2021-01-19 16:19   ` Mark Brown
2021-01-19 23:02     ` Mauro Carvalho Chehab
2021-01-20 17:07       ` Mark Brown
2021-01-21  7:29         ` Mauro Carvalho Chehab
2021-01-19 16:10 ` [PATCH v4 20/21] dts: hisilicon: add support for USB3 on Hikey 970 Mauro Carvalho Chehab
2021-01-19 16:10 ` [PATCH v4 21/21] dts: hisilicon: add support for the PMIC found " Mauro Carvalho Chehab
2021-01-19 23:01 ` [PATCH v4 22/21] regulator: hi6421v600-regulator: use some regmap helpers Mauro Carvalho Chehab

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=907c4757c16e7642be9948fbe01a390366c503a8.1611072387.git.mchehab+huawei@kernel.org \
    --to=mchehab+huawei@kernel.org \
    --cc=broonie@kernel.org \
    --cc=devel@driverdev.osuosl.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).