From: sathyanarayanan kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com>
To: Denis Efremov <efremov@linux.com>, Bjorn Helgaas <bhelgaas@google.com>
Cc: Lukas Wunner <lukas@wunner.de>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/4] PCI: pciehp: Add pciehp_set_indicators() to jointly set LED indicators
Date: Mon, 12 Aug 2019 11:25:43 -0700 [thread overview]
Message-ID: <925a00be-c2b6-697d-d46b-a279856105b4@linux.intel.com> (raw)
In-Reply-To: <20190811195944.23765-2-efremov@linux.com>
Hi,
On 8/11/19 12:59 PM, Denis Efremov wrote:
> Add pciehp_set_indicators() to set power and attention indicators with a
> single register write. Thus, avoiding waiting twice for Command Complete.
> enum pciehp_indicator introduced to switch between the indicators statuses.
>
> Signed-off-by: Denis Efremov <efremov@linux.com>
> ---
> drivers/pci/hotplug/pciehp.h | 14 ++++++++++++
> drivers/pci/hotplug/pciehp_hpc.c | 38 ++++++++++++++++++++++++++++++++
> include/uapi/linux/pci_regs.h | 2 ++
> 3 files changed, 54 insertions(+)
>
> diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
> index 8c51a04b8083..17305a6f01f1 100644
> --- a/drivers/pci/hotplug/pciehp.h
> +++ b/drivers/pci/hotplug/pciehp.h
> @@ -150,6 +150,17 @@ struct controller {
> #define NO_CMD_CMPL(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_NCCS)
> #define PSN(ctrl) (((ctrl)->slot_cap & PCI_EXP_SLTCAP_PSN) >> 19)
>
> +enum pciehp_indicator {
> + ATTN_NONE = -1,
> + ATTN_ON = 1,
> + ATTN_BLINK = 2,
> + ATTN_OFF = 3,
> + PWR_NONE = -1,
> + PWR_ON = 1,
> + PWR_BLINK = 2,
> + PWR_OFF = 3,
> +};
> +
> void pciehp_request(struct controller *ctrl, int action);
> void pciehp_handle_button_press(struct controller *ctrl);
> void pciehp_handle_disable_request(struct controller *ctrl);
> @@ -167,6 +178,9 @@ int pciehp_power_on_slot(struct controller *ctrl);
> void pciehp_power_off_slot(struct controller *ctrl);
> void pciehp_get_power_status(struct controller *ctrl, u8 *status);
>
> +void pciehp_set_indicators(struct controller *ctrl,
> + enum pciehp_indicator pwr,
> + enum pciehp_indicator attn);
> void pciehp_set_attention_status(struct controller *ctrl, u8 status);
> void pciehp_get_latch_status(struct controller *ctrl, u8 *status);
> int pciehp_query_power_fault(struct controller *ctrl);
> diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
> index bd990e3371e3..5a690b1579ec 100644
> --- a/drivers/pci/hotplug/pciehp_hpc.c
> +++ b/drivers/pci/hotplug/pciehp_hpc.c
> @@ -443,6 +443,44 @@ void pciehp_set_attention_status(struct controller *ctrl, u8 value)
> pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd);
> }
>
> +void pciehp_set_indicators(struct controller *ctrl,
> + enum pciehp_indicator pwr,
> + enum pciehp_indicator attn)
> +{
> + u16 cmd = 0, mask = 0;
> +
> + if ((!PWR_LED(ctrl) || pwr == PWR_NONE) &&
> + (!ATTN_LED(ctrl) || attn == ATTN_NONE))
> + return;
> +
> + switch (pwr) {
> + case PWR_ON:
> + case PWR_BLINK:
> + case PWR_OFF:
> + cmd = pwr << PCI_EXP_SLTCTL_PWR_IND_OFFSET;
> + mask = PCI_EXP_SLTCTL_PIC;
> + break;
> + default:
> + break;
> + }
Do we need to switch case here ? if (pwr > 0) {} should work right ?
> +
> + switch (attn) {
> + case ATTN_ON:
> + case ATTN_BLINK:
> + case ATTN_OFF:
> + cmd |= attn << PCI_EXP_SLTCTL_ATTN_IND_OFFSET;
> + mask |= PCI_EXP_SLTCTL_AIC;
> + break;
> + default:
> + break;
> + }
Same here. if (attn > 0) {}
> +
> + pcie_write_cmd_nowait(ctrl, cmd, mask);
> + ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
> + pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL,
> + cmd);
> +}
> +
> void pciehp_green_led_on(struct controller *ctrl)
> {
> if (!PWR_LED(ctrl))
> diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
> index f28e562d7ca8..18722d1f54a0 100644
> --- a/include/uapi/linux/pci_regs.h
> +++ b/include/uapi/linux/pci_regs.h
> @@ -591,10 +591,12 @@
> #define PCI_EXP_SLTCTL_CCIE 0x0010 /* Command Completed Interrupt Enable */
> #define PCI_EXP_SLTCTL_HPIE 0x0020 /* Hot-Plug Interrupt Enable */
> #define PCI_EXP_SLTCTL_AIC 0x00c0 /* Attention Indicator Control */
> +#define PCI_EXP_SLTCTL_ATTN_IND_OFFSET 0x6 /* Attention Indicator Offset */
> #define PCI_EXP_SLTCTL_ATTN_IND_ON 0x0040 /* Attention Indicator on */
> #define PCI_EXP_SLTCTL_ATTN_IND_BLINK 0x0080 /* Attention Indicator blinking */
> #define PCI_EXP_SLTCTL_ATTN_IND_OFF 0x00c0 /* Attention Indicator off */
> #define PCI_EXP_SLTCTL_PIC 0x0300 /* Power Indicator Control */
> +#define PCI_EXP_SLTCTL_PWR_IND_OFFSET 0x8 /* Power Indicator Offset */
> #define PCI_EXP_SLTCTL_PWR_IND_ON 0x0100 /* Power Indicator on */
> #define PCI_EXP_SLTCTL_PWR_IND_BLINK 0x0200 /* Power Indicator blinking */
> #define PCI_EXP_SLTCTL_PWR_IND_OFF 0x0300 /* Power Indicator off */
--
Sathyanarayanan Kuppuswamy
Linux kernel developer
next prev parent reply other threads:[~2019-08-12 18:28 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-11 19:59 [PATCH v2 0/4] Simplify PCIe hotplug indicator control Denis Efremov
2019-08-11 19:59 ` [PATCH v2 1/4] PCI: pciehp: Add pciehp_set_indicators() to jointly set LED indicators Denis Efremov
2019-08-12 6:30 ` Lukas Wunner
2019-08-12 18:25 ` sathyanarayanan kuppuswamy [this message]
2019-08-12 18:49 ` sathyanarayanan kuppuswamy
2019-08-12 20:40 ` Lukas Wunner
2019-08-12 21:03 ` sathyanarayanan kuppuswamy
2019-08-12 20:03 ` Bjorn Helgaas
2019-08-11 19:59 ` [PATCH v2 2/4] PCI: pciehp: Switch LED indicators with a single write Denis Efremov
2019-08-12 18:27 ` sathyanarayanan kuppuswamy
2019-08-11 19:59 ` [PATCH v2 3/4] PCI: pciehp: Replace pciehp_set_attention_status() Denis Efremov
2019-08-12 6:32 ` Lukas Wunner
2019-08-12 18:28 ` sathyanarayanan kuppuswamy
2019-08-11 19:59 ` [PATCH v2 4/4] PCI: pciehp: Replace pciehp_green_led_{on,off,blink}() Denis Efremov
2019-08-12 18:45 ` sathyanarayanan kuppuswamy
2019-08-12 20:03 ` Bjorn Helgaas
2019-08-12 21:14 ` Denis Efremov
2019-08-12 22:12 ` Bjorn Helgaas
2019-08-12 20:02 ` [PATCH v2 0/4] Simplify PCIe hotplug indicator control Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=925a00be-c2b6-697d-d46b-a279856105b4@linux.intel.com \
--to=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=bhelgaas@google.com \
--cc=efremov@linux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lukas@wunner.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).