From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756816AbdIHSk2 convert rfc822-to-8bit (ORCPT ); Fri, 8 Sep 2017 14:40:28 -0400 Received: from esa1.microchip.iphmx.com ([68.232.147.91]:49901 "EHLO esa1.microchip.iphmx.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756303AbdIHSk1 (ORCPT ); Fri, 8 Sep 2017 14:40:27 -0400 X-IronPort-AV: E=Sophos;i="5.42,363,1500966000"; d="scan'208";a="7233967" From: To: , CC: , , , , , , Subject: RE: [PATCH RFC] Update documentation for KSZ DSA drivers so that new drivers can be added Thread-Topic: [PATCH RFC] Update documentation for KSZ DSA drivers so that new drivers can be added Thread-Index: AdMoG1vQCaYOqKwvR0emAIo585WtYwAAm6rgABAu+IAAIMUOgAABZCSAAAZCfrA= Date: Fri, 8 Sep 2017 18:40:10 +0000 Message-ID: <93AF473E2DA327428DE3D46B72B1E9FD41121E68@CHN-SV-EXMX02.mchp-main.com> References: <93AF473E2DA327428DE3D46B72B1E9FD41121A5B@CHN-SV-EXMX02.mchp-main.com> <20170907215417.GU11248@lunn.ch> <20170908141225.GE25219@lunn.ch> In-Reply-To: <20170908141225.GE25219@lunn.ch> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [10.10.76.4] Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 8BIT MIME-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org > -----Original Message----- > From: Andrew Lunn [mailto:andrew@lunn.ch] > Sent: Friday, September 08, 2017 7:12 AM > To: Maxim Uvarov > Cc: Tristram Ha - C24268; Pavel Machek; Nathan Conrad; Vivien Didelot; Florian > Fainelli; netdev; linux-kernel@vger.kernel.org; Woojung Huh - C21699 > Subject: Re: [PATCH RFC] Update documentation for KSZ DSA drivers so that new > drivers can be added > > On Fri, Sep 08, 2017 at 04:32:35PM +0300, Maxim Uvarov wrote: > > 2017-09-08 0:54 GMT+03:00 Andrew Lunn : > > >> -- compatible: For external switch chips, compatible string must be exactly > one > > >> - of: "microchip,ksz9477" > > >> +- compatible: Should be "microchip,ksz9477" for KSZ9477 chip, > > >> + "microchip,ksz8795" for KSZ8795 chip, > > >> + "microchip,ksz8794" for KSZ8794 chip, > > >> + "microchip,ksz8765" for KSZ8765 chip, > > >> + "microchip,ksz8895" for KSZ8895 chip, > > >> + "microchip,ksz8864" for KSZ8864 chip, > > >> + "microchip,ksz8873" for KSZ8873 chip, > > >> + "microchip,ksz8863" for KSZ8863 chip, > > >> + "microchip,ksz8463" for KSZ8463 chip > > > > > > > all that chips have the same spi access to get chip id on probe(). I > > prefer common microship,ksz-spi rather than somebody will always > > maintain that list. > > The Marvell DSA driver is similar. The compatibility string tells you > enough to go find the switch ID in the switch itself. > > I suppose this comes down to, is there going to be one SPI driver for > all the devices, or lots of drivers? In general, DSA has one driver > for lots of devices. The mv88e6xxx supports around 25 devices. The b53 > has around 17, etc. > > So i would suggest one driver supporting all the different devices. > There will be 5 drivers to support these devices: ksz9477.c - KSZ9893/KSZ9897/KSZ9567/KSZ9566/KSZ9477 ksz8795.c - KSZ8795/KSZ8795/KSZ8765 ksz8895.c - KSZ8895/KSZ8864 ksz8863.c - KSZ8863/KSZ8873 ksz8463.c - KSZ8463 These chips have different SPI access mechanisms, MIB counter reading, and register set. These can be combined into one single driver using function pointers, at least for ksz8795/ksz8895/ksz8863/ksz8463. My only concern is the memory footprint. The customer may not want a big driver to cover all the switches while only one is used. Out of topic I have a question to ask the community regarding the DSA port creation: Port 1 can be specified using the reg parameter specifying 0; port 2, 1; and so on. The KSZ8794 is a variant of KSZ8795 with port 4 disabled. So lan1 = 0, lan2 = 1, lan3 = 2, cpu = 4. But our company Marketing does not want to promote that fact but treat KSZ8794 as a distinct product. So lan1 = 0, lan2 = 1, lan3 = 2, cpu = 3. Is this okay to hide this information inside the driver? This is manageable for KSZ8794 but for KSZ8864 the first port is disabled: lan1 = 1, lan2 = 2, lan3 = 3, cpu = 4. I am not sure whether DSA has or will have a way to display the port mapping to regular users.