From: Neil Armstrong <narmstrong@baylibre.com>
To: Christian Hewitt <christianshewitt@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kevin Hilman <khilman@baylibre.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: meson: khadas-vim3: move audio nodes to common dtsi
Date: Mon, 21 Oct 2019 10:29:22 +0200 [thread overview]
Message-ID: <94b2292f-3399-ab63-9b5b-1b37da93be1a@baylibre.com> (raw)
In-Reply-To: <1571416185-6449-1-git-send-email-christianshewitt@gmail.com>
On 18/10/2019 18:29, Christian Hewitt wrote:
> Move VIM3 audio nodes to meson-khadas-vim3.dtsi to enable audio for all
> boards in the VIM3 family including VIM3L.
>
> This change depends on [1] being merged/applied first.
>
> [1] https://patchwork.kernel.org/patch/11198535/
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> .../boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi | 89 ----------------------
> arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 88 +++++++++++++++++++++
> 2 files changed, 88 insertions(+), 89 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
> index 69019d0..190e934 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
> @@ -5,8 +5,6 @@
> * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
> */
>
> -#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
> -
> / {
> vddcpu_a: regulator-vddcpu-a {
> /*
> @@ -45,69 +43,6 @@
> regulator-boot-on;
> regulator-always-on;
> };
> -
> - sound {
> - compatible = "amlogic,axg-sound-card";
> - model = "G12A-KHADAS-VIM3";
> - audio-aux-devs = <&tdmout_b>;
> - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
> - "TDMOUT_B IN 1", "FRDDR_B OUT 1",
> - "TDMOUT_B IN 2", "FRDDR_C OUT 1",
> - "TDM_B Playback", "TDMOUT_B OUT";
> -
> - assigned-clocks = <&clkc CLKID_MPLL2>,
> - <&clkc CLKID_MPLL0>,
> - <&clkc CLKID_MPLL1>;
> - assigned-clock-parents = <0>, <0>, <0>;
> - assigned-clock-rates = <294912000>,
> - <270950400>,
> - <393216000>;
> - status = "okay";
> -
> - dai-link-0 {
> - sound-dai = <&frddr_a>;
> - };
> -
> - dai-link-1 {
> - sound-dai = <&frddr_b>;
> - };
> -
> - dai-link-2 {
> - sound-dai = <&frddr_c>;
> - };
> -
> - /* 8ch hdmi interface */
> - dai-link-3 {
> - sound-dai = <&tdmif_b>;
> - dai-format = "i2s";
> - dai-tdm-slot-tx-mask-0 = <1 1>;
> - dai-tdm-slot-tx-mask-1 = <1 1>;
> - dai-tdm-slot-tx-mask-2 = <1 1>;
> - dai-tdm-slot-tx-mask-3 = <1 1>;
> - mclk-fs = <256>;
> -
> - codec {
> - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
> - };
> - };
> -
> - /* hdmi glue */
> - dai-link-4 {
> - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
> -
> - codec {
> - sound-dai = <&hdmi_tx>;
> - };
> - };
> - };
> -};
> -
> -&arb {
> - status = "okay";
> -};
> -
> -&clkc_audio {
> - status = "okay";
> };
>
> &cpu0 {
> @@ -152,18 +87,6 @@
> clock-latency = <50000>;
> };
>
> -&frddr_a {
> - status = "okay";
> -};
> -
> -&frddr_b {
> - status = "okay";
> -};
> -
> -&frddr_c {
> - status = "okay";
> -};
> -
> &pwm_ab {
> pinctrl-0 = <&pwm_a_e_pins>;
> pinctrl-names = "default";
> @@ -179,15 +102,3 @@
> clock-names = "clkin1";
> status = "okay";
> };
> -
> -&tdmif_b {
> - status = "okay";
> -};
> -
> -&tdmout_b {
> - status = "okay";
> -};
> -
> -&tohdmitx {
> - status = "okay";
> -};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
> index 90815fa..3f5c373 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
> @@ -7,6 +7,7 @@
>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/gpio/meson-g12a-gpio.h>
> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
>
> / {
> model = "Khadas VIM3";
> @@ -76,6 +77,61 @@
> clock-names = "ext_clock";
> };
>
> + sound {
> + compatible = "amlogic,axg-sound-card";
> + model = "G12A-KHADAS-VIM3";
> + audio-aux-devs = <&tdmout_b>;
> + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
> + "TDMOUT_B IN 1", "FRDDR_B OUT 1",
> + "TDMOUT_B IN 2", "FRDDR_C OUT 1",
> + "TDM_B Playback", "TDMOUT_B OUT";
> +
> + assigned-clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + assigned-clock-parents = <0>, <0>, <0>;
> + assigned-clock-rates = <294912000>,
> + <270950400>,
> + <393216000>;
> + status = "okay";
> +
> + dai-link-0 {
> + sound-dai = <&frddr_a>;
> + };
> +
> + dai-link-1 {
> + sound-dai = <&frddr_b>;
> + };
> +
> + dai-link-2 {
> + sound-dai = <&frddr_c>;
> + };
> +
> + /* 8ch hdmi interface */
> + dai-link-3 {
> + sound-dai = <&tdmif_b>;
> + dai-format = "i2s";
> + dai-tdm-slot-tx-mask-0 = <1 1>;
> + dai-tdm-slot-tx-mask-1 = <1 1>;
> + dai-tdm-slot-tx-mask-2 = <1 1>;
> + dai-tdm-slot-tx-mask-3 = <1 1>;
> + mclk-fs = <256>;
> +
> + codec {
> + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
> + };
> + };
> +
> + /* hdmi glue */
> + dai-link-4 {
> + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
> +
> + codec {
> + sound-dai = <&hdmi_tx>;
> + };
> + };
> + };
> +
> dc_in: regulator-dc_in {
> compatible = "regulator-fixed";
> regulator-name = "DC_IN";
> @@ -171,6 +227,14 @@
> };
> };
>
> +&arb {
> + status = "okay";
> +};
> +
> +&clkc_audio {
> + status = "okay";
> +};
> +
> &cec_AO {
> pinctrl-0 = <&cec_ao_a_h_pins>;
> pinctrl-names = "default";
> @@ -206,6 +270,18 @@
> amlogic,tx-delay-ns = <2>;
> };
>
> +&frddr_a {
> + status = "okay";
> +};
> +
> +&frddr_b {
> + status = "okay";
> +};
> +
> +&frddr_c {
> + status = "okay";
> +};
> +
> &hdmi_tx {
> status = "okay";
> pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
> @@ -328,6 +404,18 @@
> vqmmc-supply = <&emmc_1v8>;
> };
>
> +&tdmif_b {
> + status = "okay";
> +};
> +
> +&tdmout_b {
> + status = "okay";
> +};
> +
> +&tohdmitx {
> + status = "okay";
> +};
> +
> &uart_A {
> status = "okay";
> pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
next prev parent reply other threads:[~2019-10-21 8:29 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-18 16:29 [PATCH] arm64: dts: meson: khadas-vim3: move audio nodes to common dtsi Christian Hewitt
2019-10-21 8:29 ` Neil Armstrong [this message]
2019-11-06 19:09 ` Kevin Hilman
2019-11-06 19:35 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=94b2292f-3399-ab63-9b5b-1b37da93be1a@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=christianshewitt@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).