From: Jeffrey Hugo <jhugo@codeaurora.org>
To: Sudeep Holla <sudeep.holla@arm.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>,
rjw@rjwysocki.net, linux-acpi@vger.kernel.org,
linux-kernel@vger.kernel.org, vkilari@codeaurora.org
Subject: Re: [PATCH] ACPI/PPTT: Handle architecturally unknown cache types
Date: Wed, 12 Sep 2018 10:25:47 -0600 [thread overview]
Message-ID: <960c5f0d-9494-9a87-2797-3f10fc140ab5@codeaurora.org> (raw)
In-Reply-To: <20180912161509.GA24181@e107155-lin>
On 9/12/2018 10:15 AM, Sudeep Holla wrote:
> On Wed, Sep 12, 2018 at 09:57:14AM -0600, Jeffrey Hugo wrote:
>> On 9/12/2018 9:38 AM, Sudeep Holla wrote:
>>>
>>>
>>> On 12/09/18 16:27, Sudeep Holla wrote:
>>>>
>>>>
>>>> On 12/09/18 15:41, Jeffrey Hugo wrote:
>>>
>>> [...]
>>>
>>>>>
>>>>> Correct. However, what if you have a NOCACHE (not architecturally
>>>>> specified), that is fully described in PPTT, as a non-unified cache
>>>>> (data only)? Unlikely? Maybe. Still seem possible though, therefore I
>>>>> feel this assumption is suspect.
>>>>>
>>>>
>>>> Yes, we have other issues if the architecturally not specified cache is
>>>> not unified irrespective of what PPTT says. So we may need to review and
>>>> see if that assumption is removed everywhere.
>>>>
>>>> Until then why can't a simple change fix the issue you have:
>>>>
>>>> -->8
>>>>
>>>> diff --git i/drivers/acpi/pptt.c w/drivers/acpi/pptt.c
>>>> index d1e26cb599bf..f74131201f5e 100644
>>>> --- i/drivers/acpi/pptt.c
>>>> +++ w/drivers/acpi/pptt.c
>>>> @@ -406,7 +406,8 @@ static void update_cache_properties(struct cacheinfo
>>>> *this_leaf,
>>>> * update the cache type as well.
>>>> */
>>>> if (this_leaf->type == CACHE_TYPE_NOCACHE &&
>>>> - valid_flags == PPTT_CHECKED_ATTRIBUTES)
>>>> + (valid_flags == PPTT_CHECKED_ATTRIBUTES ||
>>>> + found_cache->flags & ACPI_PPTT_CACHE_TYPE_VALID))
>>>
>>> Looking at this again, if we are supporting just presence of cache type
>>> and size(may be), then we can drop the whole valid_flags thing here.
>>>
>>>> this_leaf->type = CACHE_TYPE_UNIFIED;
>>>> }
>>>>
>>
>> Yes, this change fixes my usecase. I think it invalidates the comment, and
>> really, the comment should probably mention that we assume unified type
>> because there are other issues in supporting architecturally not specified
>> inst/data only caches.
>>
>
> Agreed.
>
>> Do you want a V2 with this? If so, do you want the fixes tag removed since
>> you seem to view this as not a bug?
>>
>
> Yes please, I am fine to retain fixes tag but that's my opinion.
>
>> I don't think I clearly understand the purpose of the valid flags, therefore
>> I feel as though I'm not sure if it can be dropped or not. Is it fair to
>> say that what the valid flags is accomplishing is identifying if we have a
>> sufficient level of information to support this cache? If not, then should
>> the cacheinfo driver not expose any sysfs information about the cache?
>>
>
> I don't see the use of the flag if we *have to* support the case where
> all the cache geometry is not present but just cache type (and maybe
> size?) is present. If that's the case we can drop valid flags entirely.
> I really don't like the idea of supporting that, but I don't have strong
> reasons to defend my idea, so I am fine with that.
>
> Further, I think in your case with NOCACHE type set, sysfs dir shouldn't
> have been created at the first place ideally. I think we need something
> like below to fix that.
>
> -->8
>
> diff --git i/drivers/base/cacheinfo.c w/drivers/base/cacheinfo.c
> index 5d5b5988e88b..cf78fa6d470d 100644
> --- i/drivers/base/cacheinfo.c
> +++ w/drivers/base/cacheinfo.c
> @@ -615,6 +615,8 @@ static int cache_add_dev(unsigned int cpu)
> this_leaf = this_cpu_ci->info_list + i;
> if (this_leaf->disable_sysfs)
> continue;
> + if (this_leaf->type == CACHE_TYPE_NOCACHE)
> + break;
> cache_groups = cache_get_attribute_groups(this_leaf);
> ci_dev = cpu_device_create(parent, this_leaf, cache_groups,
> "index%1u", i);
>
Ok, let me test this out, and send out a v2.
--
Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2018-09-12 16:25 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-11 19:32 [PATCH] ACPI/PPTT: Handle architecturally unknown cache types Jeffrey Hugo
2018-09-11 20:16 ` Jeremy Linton
2018-09-11 20:38 ` Jeffrey Hugo
2018-09-11 21:25 ` Jeremy Linton
2018-09-12 14:41 ` Jeffrey Hugo
2018-09-12 15:27 ` Sudeep Holla
2018-09-12 15:38 ` Sudeep Holla
2018-09-12 15:57 ` Jeffrey Hugo
2018-09-12 16:15 ` Sudeep Holla
2018-09-12 16:25 ` Jeffrey Hugo [this message]
2018-09-12 15:39 ` Jeremy Linton
2018-09-12 16:06 ` Jeffrey Hugo
2018-09-12 10:49 ` Sudeep Holla
2018-09-12 14:48 ` Jeffrey Hugo
2018-09-12 15:32 ` Sudeep Holla
2018-09-13 5:51 ` Brice Goglin
2018-09-13 9:39 ` James Morse
2018-09-13 10:35 ` Sudeep Holla
2018-09-13 11:53 ` Brice Goglin
2018-09-13 15:10 ` Jeffrey Hugo
2018-09-13 15:16 ` Sudeep Holla
2018-09-12 10:37 ` Sudeep Holla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=960c5f0d-9494-9a87-2797-3f10fc140ab5@codeaurora.org \
--to=jhugo@codeaurora.org \
--cc=jeremy.linton@arm.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=sudeep.holla@arm.com \
--cc=vkilari@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).