[ 0.000000] microcode: microcode updated early to revision 0xd1, date = 2010-10-01 [ 0.000000] Linux version 5.12.0-arch1-1 (linux@archlinux) (gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.36.1) #39 SMP PREEMPT Wed, 19 May 2021 15:09:56 +0000 [ 0.000000] Command line: BOOT_IMAGE=/2018Dec04/boot/vmlinuz-linux root=UUID=a5376a54-1964-4312-8894-9cf3432397fe rw rootflags=subvol=2018Dec04 resume=dev/sda3 vt.color=0x70 systemd.unified_cgroup_hierarchy=1 zswap.enabled=1 zswap.zpool=z3fold acpi_enforce_resources=lax debug ignore_loglevel log_buf_len=16M no_console_suspend systemd.log_target=null console=ttyS0,115200 console=tty17 [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d7fcffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d7fd0000-0x00000000d7fe55ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d7fe5600-0x00000000d7ff7fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d7ff8000-0x00000000d7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9afff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000fedbffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] printk: debug: ignoring loglevel setting. [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Hewlett-Packard /309F, BIOS 68YAF Ver. F.1D 07/11/2008 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1994.812 MHz processor [ 0.001341] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001348] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001357] last_pfn = 0xd7fd0 max_arch_pfn = 0x400000000 [ 0.002274] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.003126] total RAM covered: 3456M [ 0.003859] Found optimal setting for mtrr clean up [ 0.003861] gran_size: 64K chunk_size: 1G num_reg: 3 lose cover RAM: 0G [ 0.031890] check: Scanning 1 areas for low memory corruption [ 0.119635] printk: log_buf_len: 16777216 bytes [ 0.119644] printk: early log buf free: 128664(98%) [ 0.119648] RAMDISK: [mem 0x36433000-0x37210fff] [ 0.119660] ACPI: Early table checksum verification disabled [ 0.119674] ACPI: RSDP 0x00000000000F78E0 000024 (v02 HP ) [ 0.119683] ACPI: XSDT 0x00000000D7FE57C8 00007C (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.119695] ACPI: FACP 0x00000000D7FE5684 0000F4 (v04 HP 309F 00000003 HP 00000001) [ 0.119707] ACPI: DSDT 0x00000000D7FE5ACC 010A75 (v01 HP nc9700 00010000 MSFT 0100000E) [ 0.119715] ACPI: FACS 0x00000000D7FF7E80 000040 [ 0.119721] ACPI: FACS 0x00000000D7FF7E80 000040 [ 0.119728] ACPI: SLIC 0x00000000D7FE5844 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.119735] ACPI: HPET 0x00000000D7FE59BC 000038 (v01 HP 309F 00000001 HP 00000001) [ 0.119742] ACPI: APIC 0x00000000D7FE59F4 000068 (v01 HP 309F 00000001 HP 00000001) [ 0.119749] ACPI: MCFG 0x00000000D7FE5A5C 00003C (v01 HP 309F 00000001 HP 00000001) [ 0.119757] ACPI: TCPA 0x00000000D7FE5A98 000032 (v02 HP 309F 00000001 HP 00000001) [ 0.119764] ACPI: SSDT 0x00000000D7FF6541 000059 (v01 HP HPQNLP 00000001 MSFT 0100000E) [ 0.119772] ACPI: SSDT 0x00000000D7FF659A 000326 (v01 HP HPQSAT 00000001 MSFT 0100000E) [ 0.119779] ACPI: SSDT 0x00000000D7FF7115 00025F (v01 HP Cpu0Tst 00003000 INTL 20060317) [ 0.119786] ACPI: SSDT 0x00000000D7FF7374 0000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317) [ 0.119794] ACPI: SSDT 0x00000000D7FF741A 0004D7 (v01 HP CpuPm 00003000 INTL 20060317) [ 0.119800] ACPI: Reserving FACP table memory at [mem 0xd7fe5684-0xd7fe5777] [ 0.119804] ACPI: Reserving DSDT table memory at [mem 0xd7fe5acc-0xd7ff6540] [ 0.119807] ACPI: Reserving FACS table memory at [mem 0xd7ff7e80-0xd7ff7ebf] [ 0.119810] ACPI: Reserving FACS table memory at [mem 0xd7ff7e80-0xd7ff7ebf] [ 0.119813] ACPI: Reserving SLIC table memory at [mem 0xd7fe5844-0xd7fe59b9] [ 0.119815] ACPI: Reserving HPET table memory at [mem 0xd7fe59bc-0xd7fe59f3] [ 0.119818] ACPI: Reserving APIC table memory at [mem 0xd7fe59f4-0xd7fe5a5b] [ 0.119821] ACPI: Reserving MCFG table memory at [mem 0xd7fe5a5c-0xd7fe5a97] [ 0.119823] ACPI: Reserving TCPA table memory at [mem 0xd7fe5a98-0xd7fe5ac9] [ 0.119826] ACPI: Reserving SSDT table memory at [mem 0xd7ff6541-0xd7ff6599] [ 0.119828] ACPI: Reserving SSDT table memory at [mem 0xd7ff659a-0xd7ff68bf] [ 0.119831] ACPI: Reserving SSDT table memory at [mem 0xd7ff7115-0xd7ff7373] [ 0.119834] ACPI: Reserving SSDT table memory at [mem 0xd7ff7374-0xd7ff7419] [ 0.119836] ACPI: Reserving SSDT table memory at [mem 0xd7ff741a-0xd7ff78f0] [ 0.119854] ACPI: Local APIC address 0xfee00000 [ 0.119955] No NUMA configuration found [ 0.119958] Faking a node at [mem 0x0000000000000000-0x00000000d7fcffff] [ 0.119966] NODE_DATA(0) allocated [mem 0xd7fcc000-0xd7fcffff] [ 0.120031] Zone ranges: [ 0.120033] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.120038] DMA32 [mem 0x0000000001000000-0x00000000d7fcffff] [ 0.120042] Normal empty [ 0.120045] Device empty [ 0.120048] Movable zone start for each node [ 0.120050] Early memory node ranges [ 0.120051] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.120055] node 0: [mem 0x0000000000100000-0x00000000d7fcffff] [ 0.120059] Initmem setup node 0 [mem 0x0000000000001000-0x00000000d7fcffff] [ 0.120063] On node 0 totalpages: 884590 [ 0.120066] DMA zone: 64 pages used for memmap [ 0.120069] DMA zone: 21 pages reserved [ 0.120071] DMA zone: 3998 pages, LIFO batch:0 [ 0.121560] DMA zone: 28770 pages in unavailable ranges [ 0.121564] DMA32 zone: 13760 pages used for memmap [ 0.121567] DMA32 zone: 880592 pages, LIFO batch:63 [ 0.170980] DMA32 zone: 48 pages in unavailable ranges [ 0.171438] ACPI: PM-Timer IO Port: 0x1008 [ 0.171444] ACPI: Local APIC address 0xfee00000 [ 0.171456] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.171461] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.171478] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.171484] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.171489] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.171493] ACPI: IRQ0 used by override. [ 0.171496] ACPI: IRQ9 used by override. [ 0.171500] Using ACPI (MADT) for SMP configuration information [ 0.171503] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.171514] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.171543] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.171547] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.171550] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.171553] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.171557] [mem 0xd8000000-0xfebfffff] available for PCI devices [ 0.171560] Booting paravirtualized kernel on bare hardware [ 0.171566] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.180421] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:2 nr_node_ids:1 [ 0.181341] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u1048576 [ 0.181353] pcpu-alloc: s192512 r8192 d28672 u1048576 alloc=1*2097152 [ 0.181360] pcpu-alloc: [0] 0 1 [ 0.181399] Built 1 zonelists, mobility grouping on. Total pages: 870745 [ 0.181405] Policy zone: DMA32 [ 0.181408] Kernel command line: BOOT_IMAGE=/2018Dec04/boot/vmlinuz-linux root=UUID=a5376a54-1964-4312-8894-9cf3432397fe rw rootflags=subvol=2018Dec04 resume=dev/sda3 vt.color=0x70 systemd.unified_cgroup_hierarchy=1 zswap.enabled=1 zswap.zpool=z3fold acpi_enforce_resources=lax debug ignore_loglevel log_buf_len=16M no_console_suspend systemd.log_target=null console=ttyS0,115200 console=tty17 [ 0.183371] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.184311] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.184391] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off [ 0.237623] Memory: 3349152K/3538360K available (14344K kernel code, 2038K rwdata, 8972K rodata, 1652K init, 4356K bss, 188952K reserved, 0K cma-reserved) [ 0.237646] random: get_random_u64 called from __kmem_cache_create+0x22/0x530 with crng_init=0 [ 0.237900] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.237932] Kernel/User page tables isolation: enabled [ 0.237974] ftrace: allocating 41867 entries in 164 pages [ 0.259607] ftrace: allocated 164 pages with 3 groups [ 0.259888] rcu: Preemptible hierarchical RCU implementation. [ 0.259892] rcu: RCU dyntick-idle grace-period acceleration is enabled. [ 0.259894] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=2. [ 0.259897] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.259900] Trampoline variant of Tasks RCU enabled. [ 0.259902] Rude variant of Tasks RCU enabled. [ 0.259903] Tracing variant of Tasks RCU enabled. [ 0.259905] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.259907] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.266315] NR_IRQS: 20736, nr_irqs: 440, preallocated irqs: 16 [ 0.266644] Console: colour dummy device 80x25 [ 0.267001] printk: console [tty17] enabled [ 1.165293] printk: console [ttyS0] enabled [ 1.169489] ACPI: Core revision 20210105 [ 1.173562] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.182688] APIC: Switch to symmetric I/O mode setup [ 1.188127] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.209356] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x398212f9628, max_idle_ns: 881590540067 ns [ 1.219859] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.85 BogoMIPS (lpj=6649373) [ 1.223190] pid_max: default: 32768 minimum: 301 [ 1.226559] LSM: Security Framework initializing [ 1.229862] Yama: becoming mindful. [ 1.233201] LSM support for eBPF active [ 1.236574] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.239885] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.246579] process: using mwait in idle threads [ 1.249859] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 1.253189] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 1.256525] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.259858] Spectre V2 : Mitigation: Full generic retpoline [ 1.263189] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.266522] Speculative Store Bypass: Vulnerable [ 1.269858] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 1.273431] Freeing SMP alternatives memory: 36K [ 1.388113] smpboot: CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (family: 0x6, model: 0xf, stepping: 0x6) [ 1.390169] Performance Events: PEBS fmt0-, Core2 events, 4-deep LBR, Intel PMU driver. [ 1.393193] core: PEBS disabled due to CPU errata [ 1.396523] ... version: 2 [ 1.399855] ... bit width: 40 [ 1.403189] ... generic registers: 2 [ 1.406522] ... value mask: 000000ffffffffff [ 1.409855] ... max period: 000000007fffffff [ 1.413189] ... fixed-purpose events: 3 [ 1.416522] ... event mask: 0000000700000003 [ 1.420037] rcu: Hierarchical SRCU implementation. [ 1.424103] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.426605] smp: Bringing up secondary CPUs ... [ 1.430161] x86: Booting SMP configuration: [ 1.433201] .... node #0, CPUs: #1 [ 1.438574] smp: Brought up 1 node, 2 CPUs [ 1.443197] smpboot: Max logical packages: 1 [ 1.446523] smpboot: Total of 2 processors activated (7982.71 BogoMIPS) [ 1.453374] devtmpfs: initialized [ 1.456618] x86/mm: Memory block size: 128MB [ 1.460508] PM: Registering ACPI NVS region [mem 0xd7fe5600-0xd7ff7fff] (76288 bytes) [ 1.469925] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 1.476533] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 1.483282] pinctrl core: initialized pinctrl subsystem [ 1.490035] PM: RTC time: 17:27:59, date: 2021-05-19 [ 1.496714] NET: Registered protocol family 16 [ 1.500191] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 1.506671] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.516675] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.523207] audit: initializing netlink subsys (disabled) [ 1.529915] audit: type=2000 audit(1621445278.333:1): state=initialized audit_enabled=0 res=1 [ 1.530093] thermal_sys: Registered thermal governor 'fair_share' [ 1.533190] thermal_sys: Registered thermal governor 'bang_bang' [ 1.536524] thermal_sys: Registered thermal governor 'step_wise' [ 1.539856] thermal_sys: Registered thermal governor 'user_space' [ 1.543189] thermal_sys: Registered thermal governor 'power_allocator' [ 1.546546] cpuidle: using governor ladder [ 1.553196] cpuidle: using governor menu [ 1.556648] ACPI: bus type PCI registered [ 1.559857] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.563306] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 1.566526] PCI: not using MMCONFIG [ 1.569861] PCI: Using configuration type 1 for base access [ 1.578855] Kprobes globally optimized [ 1.579898] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.586681] fbcon: Taking over console [ 1.589887] ACPI: Added _OSI(Module Device) [ 1.593202] ACPI: Added _OSI(Processor Device) [ 1.599860] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.603190] ACPI: Added _OSI(Processor Aggregator Device) [ 1.609857] ACPI: Added _OSI(Linux-Dell-Video) [ 1.613189] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 1.616523] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 1.637087] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 1.696676] ACPI: Dynamic OEM Table Load: [ 1.699861] ACPI: SSDT 0xFFFF9BC7013ABC00 00023D (v01 HP Cpu0Ist 00003000 INTL 20060317) [ 1.710511] ACPI: Dynamic OEM Table Load: [ 1.713194] ACPI: SSDT 0xFFFF9BC70131B800 0004CB (v01 HP Cpu0Cst 00003001 INTL 20060317) [ 1.724013] ACPI: Dynamic OEM Table Load: [ 1.729870] ACPI: SSDT 0xFFFF9BC701A02C00 0000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317) [ 1.737316] ACPI: Dynamic OEM Table Load: [ 1.743193] ACPI: SSDT 0xFFFF9BC7019ADCC0 000085 (v01 HP Cpu1Cst 00003000 INTL 20060317) [ 1.751109] ACPI: EC: EC started [ 1.753189] ACPI: EC: interrupt blocked [ 1.765961] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 1.769858] ACPI: \_SB_.C003.C004.C006: Boot DSDT EC used to handle transactions [ 1.779858] ACPI: Interpreter enabled [ 1.783216] ACPI: (supports S0 S3 S4 S5) [ 1.786523] ACPI: Using IOAPIC for interrupt routing [ 1.789906] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 1.800864] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 1.809862] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 1.819997] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.830090] ACPI: Enabled 13 GPEs in block 00 to 1F [ 1.844018] ACPI: PM: Power Resource [C1F8] (on) [ 1.851081] ACPI: PM: Power Resource [C207] (on) [ 1.854395] ACPI: PM: Power Resource [C224] (on) [ 1.864258] ACPI: PM: Power Resource [C22C] (on) [ 1.874150] ACPI: PM: Power Resource [C334] (off) [ 1.879958] ACPI: PM: Power Resource [C335] (off) [ 1.883286] ACPI: PM: Power Resource [C336] (off) [ 1.889956] ACPI: PM: Power Resource [C337] (off) [ 1.893285] ACPI: PM: Power Resource [C338] (off) [ 1.899965] ACPI: PM: Power Resource [C339] (off) [ 1.903285] ACPI: PM: Power Resource [C33A] (off) [ 1.906625] ACPI: PM: Power Resource [C33B] (off) [ 1.913286] ACPI: PM: Power Resource [C33C] (off) [ 1.916633] ACPI: PM: Power Resource [C33D] (off) [ 1.923247] ACPI: PM: Power Resource [C33E] (off) [ 1.934878] ACPI: PCI Root Bridge [C003] (domain 0000 [bus 00-ff]) [ 1.939863] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 1.949863] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 1.959868] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 1.975724] PCI host bridge to bus 0000:00 [ 1.979857] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.986523] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.993189] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.999856] pci_bus 0000:00: root bus resource [mem 0xd8000000-0xfedfffff window] [ 2.009856] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window] [ 2.016522] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 2.023189] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.029874] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000 [ 2.036695] pci 0000:00:01.0: [8086:27a1] type 01 class 0x060400 [ 2.039922] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 2.046730] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 2.053214] pci 0000:00:1b.0: reg 0x10: [mem 0xf4700000-0xf4703fff 64bit] [ 2.059985] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 2.066708] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 2.073336] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.080047] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 [ 2.086669] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.090048] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400 [ 2.096669] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 2.103396] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 2.109913] pci 0000:00:1d.0: reg 0x20: [io 0x5000-0x501f] [ 2.116716] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 2.123246] pci 0000:00:1d.1: reg 0x20: [io 0x5020-0x503f] [ 2.126708] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 2.133246] pci 0000:00:1d.2: reg 0x20: [io 0x5040-0x505f] [ 2.140056] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 2.146579] pci 0000:00:1d.3: reg 0x20: [io 0x5060-0x507f] [ 2.150054] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 2.156542] pci 0000:00:1d.7: reg 0x10: [mem 0xf4704000-0xf47043ff] [ 2.163266] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 2.170021] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 2.176776] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100 [ 2.183316] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 2.189860] pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH6 GPIO [ 2.196525] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f) [ 2.203195] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0238 (mask 0007) [ 2.213189] pci 0000:00:1f.0: quirk_ich7_lpc+0x0/0x60 took 29296 usecs [ 2.220035] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a [ 2.226541] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] [ 2.229865] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] [ 2.236539] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007] [ 2.243199] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003] [ 2.246532] pci 0000:00:1f.1: reg 0x20: [io 0x5080-0x508f] [ 2.253212] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 2.259856] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 2.266523] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 2.273189] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 2.280013] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601 [ 2.286541] pci 0000:00:1f.2: reg 0x10: [io 0x13f0-0x13f7] [ 2.293199] pci 0000:00:1f.2: reg 0x14: [io 0x15f4-0x15f7] [ 2.296532] pci 0000:00:1f.2: reg 0x18: [io 0x1370-0x1377] [ 2.303201] pci 0000:00:1f.2: reg 0x1c: [io 0x1574-0x1577] [ 2.309866] pci 0000:00:1f.2: reg 0x20: [io 0x50b0-0x50bf] [ 2.313199] pci 0000:00:1f.2: reg 0x24: [mem 0xf4705000-0xf47053ff] [ 2.319922] pci 0000:00:1f.2: PME# supported from D3hot [ 2.326770] pci 0000:01:00.0: [1002:71c5] type 00 class 0x030000 [ 2.333213] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] [ 2.339869] pci 0000:01:00.0: reg 0x14: [io 0x4000-0x40ff] [ 2.343534] pci 0000:01:00.0: reg 0x18: [mem 0xf4600000-0xf460ffff] [ 2.349901] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 2.356540] pci 0000:01:00.0: enabling Extended Tags [ 2.363277] pci 0000:01:00.0: supports D1 D2 [ 2.366647] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 2.376538] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.383190] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 2.386523] pci 0000:00:01.0: bridge window [mem 0xf4600000-0xf46fffff] [ 2.393191] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 2.403282] acpiphp: Slot [1] registered [ 2.406680] pci 0000:08:00.0: [14e4:16fd] type 00 class 0x020000 [ 2.413338] pci 0000:08:00.0: reg 0x10: [mem 0xf4100000-0xf410ffff 64bit] [ 2.420141] pci 0000:08:00.0: enabling Extended Tags [ 2.423607] pci 0000:08:00.0: PME# supported from D3hot D3cold [ 2.430254] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 2.439922] pci 0000:00:1c.0: PCI bridge to [bus 08] [ 2.446528] pci 0000:00:1c.0: bridge window [mem 0xf4100000-0xf41fffff] [ 2.453392] pci 0000:10:00.0: [8086:4222] type 00 class 0x028000 [ 2.459965] pci 0000:10:00.0: reg 0x10: [mem 0xf4000000-0xf4000fff] [ 2.467052] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold [ 2.473498] pci 0000:10:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 2.483257] pci 0000:00:1c.1: PCI bridge to [bus 10] [ 2.486528] pci 0000:00:1c.1: bridge window [mem 0xf4000000-0xf40fffff] [ 2.493329] acpiphp: Slot [1-1] registered [ 2.499911] pci 0000:00:1c.3: PCI bridge to [bus 20] [ 2.503192] pci 0000:00:1c.3: bridge window [io 0x2000-0x3fff] [ 2.509859] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf3ffffff] [ 2.516553] pci_bus 0000:02: extended config space not accessible [ 2.523293] pci 0000:02:06.0: [104c:8039] type 02 class 0x060700 [ 2.529882] pci 0000:02:06.0: reg 0x10: [mem 0xf4200000-0xf4200fff] [ 2.533253] pci 0000:02:06.0: supports D1 D2 [ 2.539856] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot [ 2.546642] pci 0000:02:06.1: [104c:803a] type 00 class 0x0c0010 [ 2.549881] pci 0000:02:06.1: reg 0x10: [mem 0xf4201000-0xf42017ff] [ 2.556549] pci 0000:02:06.1: reg 0x14: [mem 0xf4204000-0xf4207fff] [ 2.563319] pci 0000:02:06.1: supports D1 D2 [ 2.569856] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot [ 2.573278] pci 0000:02:06.2: [104c:803b] type 00 class 0x018000 [ 2.579881] pci 0000:02:06.2: reg 0x10: [mem 0xf4208000-0xf4208fff] [ 2.586662] pci 0000:02:06.2: supports D1 D2 [ 2.589856] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot [ 2.596608] pci 0000:02:06.3: [104c:803c] type 00 class 0x080500 [ 2.603214] pci 0000:02:06.3: reg 0x10: [mem 0xf4209000-0xf42090ff] [ 2.609996] pci 0000:02:06.3: supports D1 D2 [ 2.613189] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot [ 2.619947] pci 0000:02:06.4: [104c:803d] type 00 class 0x078000 [ 2.626548] pci 0000:02:06.4: reg 0x10: [mem 0xf420a000-0xf420afff] [ 2.633202] pci 0000:02:06.4: reg 0x14: [mem 0xf420b000-0xf420bfff] [ 2.639983] pci 0000:02:06.4: supports D1 D2 [ 2.643189] pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot [ 2.650003] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode) [ 2.656529] pci 0000:00:1e.0: bridge window [mem 0xf4200000-0xf45fffff] [ 2.663195] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 2.669856] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.679856] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 2.689858] pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xfedfffff window] (subtractive decode) [ 2.696523] pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff window] (subtractive decode) [ 2.706523] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 2.716560] pci_bus 0000:03: extended config space not accessible [ 2.723214] pci_bus 0000:03: busn_res: [bus 03] end can not be updated to 06 [ 2.729861] pci 0000:00:1e.0: bridge has subordinate 03 but max busn 06 [ 2.738051] ACPI: PCI Interrupt Link [C10F] (IRQs *10 11) [ 2.743399] ACPI: PCI Interrupt Link [C110] (IRQs *10 11) [ 2.750063] ACPI: PCI Interrupt Link [C111] (IRQs 10 *11) [ 2.756733] ACPI: PCI Interrupt Link [C112] (IRQs 10 11) *5 [ 2.760062] ACPI: PCI Interrupt Link [C125] (IRQs *10 11) [ 2.766730] ACPI: PCI Interrupt Link [C126] (IRQs *10 11) [ 2.773397] ACPI: PCI Interrupt Link [C127] (IRQs 10 *11) [ 2.776710] ACPI: PCI Interrupt Link [C128] (IRQs) *0, disabled. [ 2.786552] pci 0000:08:00.0: BAR 0: assigned [mem 0xf4100000-0xf410ffff 64bit] [ 2.786522] ACPI: EC: interrupt unblocked [ 2.793190] ACPI: EC: event unblocked [ 2.796522] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 2.803189] ACPI: EC: GPE=0x16 [ 2.806523] ACPI: \_SB_.C003.C004.C006: Boot DSDT EC initialization complete [ 2.813190] ACPI: \_SB_.C003.C004.C006: EC: Used to handle transactions and events [ 2.819960] iommu: Default domain type: Translated [ 2.826550] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 2.829854] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 2.839860] pci 0000:01:00.0: vgaarb: bridge control possible [ 2.846523] vgaarb: loaded [ 2.849221] SCSI subsystem initialized [ 2.853221] libata version 3.00 loaded. [ 2.856536] ACPI: bus type USB registered [ 2.859880] usbcore: registered new interface driver usbfs [ 2.863205] usbcore: registered new interface driver hub [ 2.866533] usbcore: registered new device driver usb [ 2.869898] pps_core: LinuxPPS API ver. 1 registered [ 2.873189] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.876527] PTP clock support registered [ 2.879871] EDAC MC: Ver: 3.0.0 [ 2.883438] NetLabel: Initializing [ 2.886524] NetLabel: domain hash size = 128 [ 2.889856] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.893216] NetLabel: unlabeled traffic allowed by default [ 2.896529] PCI: Using ACPI for IRQ routing [ 2.904751] PCI: pci_cache_line_size set to 64 bytes [ 2.906614] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 2.909856] e820: reserve RAM buffer [mem 0xd7fd0000-0xd7ffffff] [ 2.914718] hpet: 3 channels of 0 reserved for per-cpu timers [ 2.919863] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 2.926522] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 2.935212] clocksource: Switched to clocksource tsc-early [ 2.957219] VFS: Disk quotas dquot_6.6.0 [ 2.961177] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.968188] pnp: PnP ACPI init [ 2.971563] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 2.978525] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved [ 2.985474] system 00:00: [mem 0x00100000-0xd7ffffff] could not be reserved [ 2.992428] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 3.000205] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 3.008220] pnp 00:02: [dma 1] [ 3.011388] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active) [ 3.018071] pnp 00:03: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 3.025330] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 3.031912] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 3.038462] pnp 00:06: Plug and Play ACPI device, IDs SYN011d SYN0100 SYN0002 PNP0f13 (active) [ 3.047357] system 00:07: [io 0x0500-0x055f] has been reserved [ 3.053271] system 00:07: [io 0x0800-0x080f] has been reserved [ 3.059181] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved [ 3.065782] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved [ 3.072389] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.080217] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 3.086129] system 00:08: [io 0x1000-0x107f] has been reserved [ 3.092036] system 00:08: [io 0x1100-0x113f] has been reserved [ 3.097943] system 00:08: [io 0x1200-0x121f] has been reserved [ 3.103853] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved [ 3.110458] system 00:08: [mem 0xfec00000-0xfec000ff] could not be reserved [ 3.117405] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 3.124012] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 3.130615] system 00:08: [mem 0xfed90000-0xfed9afff] has been reserved [ 3.137220] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.144414] system 00:09: [mem 0xfeda0000-0xfedbffff] has been reserved [ 3.151019] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved [ 3.157625] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.164433] pnp: PnP ACPI: found 10 devices [ 3.175884] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.184839] NET: Registered protocol family 2 [ 3.189463] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 3.198104] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 3.206241] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 3.213622] TCP: Hash tables configured (established 32768 bind 32768) [ 3.220296] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear) [ 3.227735] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 3.234460] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 3.242719] NET: Registered protocol family 1 [ 3.247127] NET: Registered protocol family 44 [ 3.251592] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000 [ 3.259755] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000 [ 3.271209] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 10] add_size 1000 [ 3.279369] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 10] add_size 200000 add_align 100000 [ 3.290821] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 20] add_size 200000 add_align 100000 [ 3.302286] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000 [ 3.310733] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd8000000-0xd81fffff 64bit pref] [ 3.318552] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd8200000-0xd83fffff 64bit pref] [ 3.326368] pci 0000:00:1c.3: BAR 15: assigned [mem 0xd8400000-0xd85fffff 64bit pref] [ 3.334182] pci 0000:00:1c.0: BAR 13: assigned [io 0x6000-0x6fff] [ 3.340349] pci 0000:00:1c.1: BAR 13: assigned [io 0x7000-0x7fff] [ 3.346517] pci 0000:00:1e.0: BAR 13: assigned [io 0x8000-0x8fff] [ 3.352689] pci 0000:01:00.0: BAR 6: assigned [mem 0xf4620000-0xf463ffff pref] [ 3.359898] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.364855] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 3.370939] pci 0000:00:01.0: bridge window [mem 0xf4600000-0xf46fffff] [ 3.377715] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 3.385443] pci 0000:00:1c.0: PCI bridge to [bus 08] [ 3.390401] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] [ 3.396486] pci 0000:00:1c.0: bridge window [mem 0xf4100000-0xf41fffff] [ 3.403260] pci 0000:00:1c.0: bridge window [mem 0xd8000000-0xd81fffff 64bit pref] [ 3.410993] pci 0000:00:1c.1: PCI bridge to [bus 10] [ 3.415951] pci 0000:00:1c.1: bridge window [io 0x7000-0x7fff] [ 3.422036] pci 0000:00:1c.1: bridge window [mem 0xf4000000-0xf40fffff] [ 3.428814] pci 0000:00:1c.1: bridge window [mem 0xd8200000-0xd83fffff 64bit pref] [ 3.436544] pci 0000:00:1c.3: PCI bridge to [bus 20] [ 3.441504] pci 0000:00:1c.3: bridge window [io 0x2000-0x3fff] [ 3.447587] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf3ffffff] [ 3.454363] pci 0000:00:1c.3: bridge window [mem 0xd8400000-0xd85fffff 64bit pref] [ 3.462100] pci 0000:02:06.0: BAR 15: assigned [mem 0xdc000000-0xdfffffff pref] [ 3.469398] pci 0000:02:06.0: BAR 16: no space for [mem size 0x04000000] [ 3.476085] pci 0000:02:06.0: BAR 16: failed to assign [mem size 0x04000000] [ 3.483118] pci 0000:02:06.0: BAR 13: assigned [io 0x8000-0x80ff] [ 3.489286] pci 0000:02:06.0: BAR 14: assigned [io 0x8400-0x84ff] [ 3.495454] pci 0000:02:06.0: BAR 16: assigned [mem 0xdc000000-0xdfffffff] [ 3.502320] pci 0000:02:06.0: BAR 15: no space for [mem size 0x04000000 pref] [ 3.509441] pci 0000:02:06.0: BAR 15: failed to assign [mem size 0x04000000 pref] [ 3.516908] pci 0000:02:06.0: CardBus bridge to [bus 03] [ 3.522210] pci 0000:02:06.0: bridge window [io 0x8000-0x80ff] [ 3.528294] pci 0000:02:06.0: bridge window [io 0x8400-0x84ff] [ 3.534378] pci 0000:02:06.0: bridge window [mem 0xdc000000-0xdfffffff] [ 3.541154] pci 0000:00:1e.0: PCI bridge to [bus 02-03] [ 3.546385] pci 0000:00:1e.0: bridge window [io 0x8000-0x8fff] [ 3.552471] pci 0000:00:1e.0: bridge window [mem 0xf4200000-0xf45fffff] [ 3.559253] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 3.565422] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 3.571591] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 3.578453] pci_bus 0000:00: resource 7 [mem 0xd8000000-0xfedfffff window] [ 3.585312] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff window] [ 3.592173] pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff window] [ 3.599034] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 3.604594] pci_bus 0000:01: resource 1 [mem 0xf4600000-0xf46fffff] [ 3.610847] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 3.618051] pci_bus 0000:08: resource 0 [io 0x6000-0x6fff] [ 3.623611] pci_bus 0000:08: resource 1 [mem 0xf4100000-0xf41fffff] [ 3.629864] pci_bus 0000:08: resource 2 [mem 0xd8000000-0xd81fffff 64bit pref] [ 3.637074] pci_bus 0000:10: resource 0 [io 0x7000-0x7fff] [ 3.642635] pci_bus 0000:10: resource 1 [mem 0xf4000000-0xf40fffff] [ 3.648887] pci_bus 0000:10: resource 2 [mem 0xd8200000-0xd83fffff 64bit pref] [ 3.656093] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff] [ 3.661653] pci_bus 0000:20: resource 1 [mem 0xf0000000-0xf3ffffff] [ 3.667906] pci_bus 0000:20: resource 2 [mem 0xd8400000-0xd85fffff 64bit pref] [ 3.675114] pci_bus 0000:02: resource 0 [io 0x8000-0x8fff] [ 3.680674] pci_bus 0000:02: resource 1 [mem 0xf4200000-0xf45fffff] [ 3.686928] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window] [ 3.693093] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window] [ 3.699260] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window] [ 3.706122] pci_bus 0000:02: resource 7 [mem 0xd8000000-0xfedfffff window] [ 3.712985] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff window] [ 3.719844] pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff window] [ 3.726706] pci_bus 0000:03: resource 0 [io 0x8000-0x80ff] [ 3.732268] pci_bus 0000:03: resource 1 [io 0x8400-0x84ff] [ 3.737829] pci_bus 0000:03: resource 3 [mem 0xdc000000-0xdfffffff] [ 3.746032] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 3.754411] PCI: CLS 64 bytes, default 64 [ 3.758523] Trying to unpack rootfs image as initramfs... [ 3.938158] Freeing initrd memory: 14200K [ 3.942847] check: Scanning for low memory corruption every 60 seconds [ 3.949948] Initialise system trusted keyrings [ 3.954400] Key type blacklist registered [ 3.958531] workingset: timestamp_bits=41 max_order=20 bucket_order=0 [ 3.967293] zbud: loaded [ 3.984175] Key type asymmetric registered [ 3.988269] Asymmetric key parser 'x509' registered [ 3.993146] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 4.000595] io scheduler mq-deadline registered [ 4.005123] io scheduler kyber registered [ 4.009171] io scheduler bfq registered [ 4.014605] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.021357] vesafb: mode is 1400x1050x32, linelength=5632, pages=0 [ 4.027532] vesafb: scrolling: redraw [ 4.031195] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 4.036786] vesafb: framebuffer at 0xe0000000, mapped to 0x(____ptrval____), using 5824k, total 5824k [ 4.046152] Console: switching to colour frame buffer device 175x65 [ 4.141446] fb0: VESA VGA frame buffer device [ 4.150203] Monitor-Mwait will be used to enter C-1 state [ 4.156093] Monitor-Mwait will be used to enter C-2 state [ 4.161970] ACPI: \_PR_.CPU0: Found 2 idle states [ 4.167618] ACPI: AC: AC Adapter [C1C3] (on-line) [ 4.172837] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 4.181953] ACPI: button: Sleep Button [C24D] [ 4.186748] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 4.195665] ACPI: button: Lid Switch [C245] [ 4.200269] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 4.216566] ACPI: button: Power Button [PWRF] [ 4.271385] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.277601] ACPI: thermal: Thermal Zone [TZ0] (58 C) [ 4.302439] thermal LNXTHERM:01: registered as thermal_zone1 [ 4.308592] ACPI: thermal: Thermal Zone [TZ1] (57 C) [ 4.335355] thermal LNXTHERM:02: registered as thermal_zone2 [ 4.341508] ACPI: thermal: Thermal Zone [TZ2] (49 C) [ 4.365903] thermal LNXTHERM:03: registered as thermal_zone3 [ 4.372058] ACPI: thermal: Thermal Zone [TZ3] (41 C) [ 4.394177] thermal LNXTHERM:04: registered as thermal_zone4 [ 4.400334] ACPI: thermal: Thermal Zone [TZ4] (16 C) [ 4.411812] thermal LNXTHERM:05: registered as thermal_zone5 [ 4.418015] ACPI: thermal: Thermal Zone [TZ5] (65 C) [ 4.423678] ACPI: battery: Slot [C1C5] (battery absent) [ 4.423744] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 4.429530] ACPI: battery: Slot [C1C4] (battery absent) [ 4.436468] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.453120] Non-volatile memory driver v1.3 [ 4.457684] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel [ 4.464969] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 4.473111] ahci 0000:00:1f.2: version 3.0 [ 4.477885] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 4.485102] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [ 4.494085] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part [ 4.503381] scsi host0: ahci [ 4.506752] scsi host1: ahci [ 4.510090] scsi host2: ahci [ 4.513422] scsi host3: ahci [ 4.516637] ata1: SATA max UDMA/133 abar m1024@0xf4705000 port 0xf4705100 irq 28 [ 4.524677] ata2: DUMMY [ 4.553847] ata3: DUMMY [ 4.582560] ata4: DUMMY [ 4.610835] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.643696] ehci-pci: EHCI PCI platform driver [ 4.674561] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 4.705970] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 4.739642] ehci-pci 0000:00:1d.7: debug port 1 [ 4.774037] ehci-pci 0000:00:1d.7: irq 20, io mem 0xf4704000 [ 4.816551] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 4.848239] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12 [ 4.882620] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.916041] usb usb1: Product: EHCI Host Controller [ 4.947077] usb usb1: Manufacturer: Linux 5.12.0-arch1-1 ehci_hcd [ 4.979256] tsc: Refined TSC clocksource calibration: 1994.999 MHz [ 5.011455] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x398374a7fb8, max_idle_ns: 881590820223 ns [ 5.011459] usb usb1: SerialNumber: 0000:00:1d.7 [ 5.079631] clocksource: Switched to clocksource tsc [ 5.079654] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.111825] hub 1-0:1.0: USB hub found [ 5.175510] hub 1-0:1.0: 8 ports detected [ 5.177491] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 5.206516] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.241313] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 5.274685] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 5.310727] ohci-pci: OHCI PCI platform driver [ 5.345429] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 5.376841] uhci_hcd: USB Universal Host Controller Interface driver [ 5.445734] ata1.00: ATA-7: TOSHIBA MK1234GSX, AH001H, max UDMA/100 [ 5.445956] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.479986] ata1.00: 234441648 sectors, multi 16: LBA48 [ 5.513264] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.581564] uhci_hcd 0000:00:1d.0: detected 2 ports [ 5.584047] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 5.614006] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005000 [ 5.649290] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 5.649343] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 5.682500] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.12 [ 5.718658] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 5.753564] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.790103] ata1.00: configured for UDMA/100 [ 5.824715] usb usb2: Product: UHCI Host Controller [ 5.870158] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1234GS 1H PQ: 0 ANSI: 5 [ 5.892086] usb usb2: Manufacturer: Linux 5.12.0-arch1-1 uhci_hcd [ 5.925058] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 5.961140] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.995557] sd 0:0:0:0: [sda] Write Protect is off [ 6.031581] hub 2-0:1.0: USB hub found [ 6.064373] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.097383] hub 2-0:1.0: 2 ports detected [ 6.129233] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.162843] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 6.265825] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 6.301765] uhci_hcd 0000:00:1d.1: detected 2 ports [ 6.334881] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00005020 [ 6.355764] sda: sda1 sda2 sda3 sda4 [ 6.368873] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.12 [ 6.437195] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.472959] usb usb3: Product: UHCI Host Controller [ 6.506076] usb usb3: Manufacturer: Linux 5.12.0-arch1-1 uhci_hcd [ 6.506601] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.540591] usb usb3: SerialNumber: 0000:00:1d.1 [ 6.573523] usb 2-1: new full-speed USB device number 2 using uhci_hcd [ 6.642796] hub 3-0:1.0: USB hub found [ 6.675453] hub 3-0:1.0: 2 ports detected [ 6.708466] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 6.742748] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 6.779698] uhci_hcd 0000:00:1d.2: detected 2 ports [ 6.813835] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040 [ 6.848764] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.12 [ 6.886672] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.923530] usb usb4: Product: UHCI Host Controller [ 6.957962] usb usb4: Manufacturer: Linux 5.12.0-arch1-1 uhci_hcd [ 6.993843] usb usb4: SerialNumber: 0000:00:1d.2 [ 7.028379] hub 4-0:1.0: USB hub found [ 7.033474] random: fast init done [ 7.061527] hub 4-0:1.0: 2 ports detected [ 7.127374] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 7.161725] usb 2-1: New USB device found, idVendor=03f0, idProduct=171d, bcdDevice= 1.00 [ 7.199382] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.199407] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 7.235603] usb 2-1: Product: HP Integrated Module [ 7.271982] uhci_hcd 0000:00:1d.3: detected 2 ports [ 7.305630] usb 2-1: Manufacturer: Broadcom Corp [ 7.339287] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005060 [ 7.407290] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.12 [ 7.444790] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.481054] usb usb5: Product: UHCI Host Controller [ 7.514538] usb usb5: Manufacturer: Linux 5.12.0-arch1-1 uhci_hcd [ 7.549609] usb usb5: SerialNumber: 0000:00:1d.3 [ 7.582781] hub 5-0:1.0: USB hub found [ 7.614602] hub 5-0:1.0: 2 ports detected [ 7.646572] usbcore: registered new interface driver usbserial_generic [ 7.663201] usb 2-2: new full-speed USB device number 3 using uhci_hcd [ 7.680987] usbserial: USB Serial support registered for generic [ 7.749565] rtc_cmos 00:04: RTC can wake from S4 [ 7.782278] rtc_cmos 00:04: registered as rtc0 [ 7.814283] hpet: Lost 1 RTC interrupts [ 7.845476] rtc_cmos 00:04: setting system clock to 2021-05-19T17:28:06 UTC (1621445286) [ 7.881243] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 7.916373] usb 4-1: new full-speed USB device number 2 using uhci_hcd [ 7.950541] intel_pstate: CPU model not supported [ 7.982529] ledtrig-cpu: registered to indicate activity on CPUs [ 8.015814] hid: raw HID events driver (C) Jiri Kosina [ 8.048061] drop_monitor: Initializing network drop monitor service [ 8.081415] Initializing XFRM netlink socket [ 8.112751] NET: Registered protocol family 10 [ 8.152493] usb 2-2: New USB device found, idVendor=08ff, idProduct=2580, bcdDevice= 6.23 [ 8.187883] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 8.221927] usb 2-2: Product: Fingerprint Sensor [ 8.222082] Segment Routing with IPv6 [ 8.283314] RPL Segment Routing with IPv6 [ 8.313790] NET: Registered protocol family 17 [ 8.345019] microcode: sig=0x6f6, pf=0x20, revision=0xd1 [ 8.351619] usb 4-1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10 [ 8.411804] microcode: Microcode Update Driver: v2.2. [ 8.411813] IPI shorthand broadcast: enabled [ 8.411857] sched_clock: Marking stable (7479893522, 929960513)->(8623105320, -213251285) [ 8.443396] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.543479] registered taskstats version 1 [ 8.543717] usb 4-1: Product: USB Receiver [ 8.574799] Loading compiled-in X.509 certificates [ 8.605588] usb 1-7: new high-speed USB device number 5 using ehci-pci [ 8.642363] Loaded X.509 cert 'Build time autogenerated kernel key: e3f62a7aad01602b54a1b14180ab55bb7bf715c3' [ 8.670617] usb 4-1: Manufacturer: Logitech [ 8.740615] zswap: loaded using pool lz4/z3fold [ 8.772715] Key type ._fscrypt registered [ 8.803981] Key type .fscrypt registered [ 8.835073] Key type fscrypt-provisioning registered [ 8.867588] usb 1-7: New USB device found, idVendor=04b4, idProduct=6560, bcdDevice= 0.0b [ 8.867845] PM: Magic number: 5:152:492 [ 8.903695] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 8.936637] RAS: Correctable Errors collector initialized. [ 8.971136] hub 1-7:1.0: USB hub found [ 9.036599] hub 1-7:1.0: 4 ports detected [ 9.075979] Freeing unused decrypted memory: 2036K [ 9.109388] Freeing unused kernel image (initmem) memory: 1652K [ 9.143143] Write protecting the kernel read-only data: 26624k [ 9.178062] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 9.213546] Freeing unused kernel image (rodata/data gap) memory: 1268K [ 9.313454] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 9.347757] rodata_test: all tests were successful [ 9.380331] x86/mm: Checking user space page tables [ 9.442359] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 9.476375] Run /init as init process [ 9.507272] with arguments: [ 9.537146] /init [ 9.566131] with environment: [ 9.595935] HOME=/ [ 9.624651] TERM=linux [ 9.653286] BOOT_IMAGE=/2018Dec04/boot/vmlinuz-linux [ 9.737219] Linux agpgart interface v0.103 [ 9.874202] [drm] radeon kernel modesetting enabled. [ 9.905181] checking generic (e0000000 5b0000) vs hw (e0000000 10000000) [ 9.938116] fb0: switching to radeondrmfb from VESA VGA [ 9.969779] Console: switching to colour dummy device 80x25 [ 9.975442] radeon 0000:01:00.0: vgaarb: deactivate vga console [ 9.981638] [drm] initializing kernel modesetting (RV530 0x1002:0x71C5 0x103C:0x309F 0x00). [ 9.990044] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window] [ 10.003238] caller pci_map_rom+0x68/0x190 mapping multiple BARs [ 10.009242] ATOM BIOS: HP [ 10.011890] [drm] Generation 2 PCI interface, using max accessible memory [ 10.018666] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used) [ 10.027350] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF [ 10.034925] [drm] Detected VRAM RAM=256M, BAR=256M [ 10.039707] [drm] RAM width 128bits DDR [ 10.043638] [TTM] Zone kernel: Available graphics memory: 1685318 KiB [ 10.050201] [drm] radeon: 256M of VRAM memory ready [ 10.055072] [drm] radeon: 512M of GTT memory ready. [ 10.059949] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 10.067036] [drm] radeon: power management initialized [ 10.080367] [drm] radeon: 1 quad pipes, 2 z pipes initialized. [ 10.088217] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 10.095093] radeon 0000:01:00.0: WB enabled [ 10.099268] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000000 [ 10.107407] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 10.113287] radeon 0000:01:00.0: radeon: using MSI. [ 10.118183] [drm] radeon: irq initialized. [ 10.122282] [drm] Loading R500 Microcode [ 10.126748] [drm] radeon: ring at 0x0000000010001000 [ 10.131741] [drm] ring test succeeded in 11 usecs [ 10.136937] [drm] ib test succeeded in 0 usecs [ 10.142073] [drm] Radeon Display Connectors [ 10.146277] [drm] Connector 0: [ 10.149332] [drm] VGA-1 [ 10.151954] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 10.159347] [drm] Encoders: [ 10.162310] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 10.166935] [drm] Connector 1: [ 10.169994] [drm] LVDS-1 [ 10.172694] [drm] DDC: 0x7e30 0x7e30 0x7e34 0x7e34 0x7e38 0x7e38 0x7e3c 0x7e3c [ 10.180083] [drm] Encoders: [ 10.183043] [drm] LCD1: INTERNAL_LVTM1 [ 10.187138] [drm] Connector 2: [ 10.190186] [drm] SVIDEO-1 [ 10.193057] [drm] Encoders: [ 10.196019] [drm] TV1: INTERNAL_KLDSCP_DAC2 [ 10.200538] [drm] Connector 3: [ 10.203585] [drm] DVI-I-1 [ 10.206372] [drm] HPD1 [ 10.208899] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 10.216285] [drm] Encoders: [ 10.219248] [drm] DFP2: INTERNAL_KLDSCP_DVO1 [ 10.575917] [drm] fb mappable at 0xE00C0000 [ 10.580097] [drm] vram apper at 0xE0000000 [ 10.584184] [drm] size 7258112 [ 10.587231] [drm] fb depth is 24 [ 10.590452] [drm] pitch is 6912 [ 10.593944] fbcon: radeondrmfb (fb0) is primary device [ 10.650715] Console: switching to colour frame buffer device 210x65 [ 10.667999] radeon 0000:01:00.0: [drm] fb0: radeondrmfb frame buffer device [ 10.699953] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0 [ 10.864505] i8042: PNP: PS/2 Controller [PNP0303:C221,PNP0f13:C222] at 0x60,0x64 irq 1,12 [ 10.881824] i8042: Detected active multiplexing controller, rev 1.1 [ 10.889056] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 10.894269] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 10.899698] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 10.904949] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 10.912865] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 10.928031] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/0003:046D:C52B.0001/input/input3 [ 10.939698] sdhci: Secure Digital Host Controller Interface driver [ 10.945951] sdhci: Copyright(c) Pierre Ossman [ 10.950697] ata_piix 0000:00:1f.1: version 2.13 [ 10.961505] sdhci-pci 0000:02:06.3: SDHCI controller found [104c:803c] (rev 0) [ 10.968996] scsi host4: ata_piix [ 10.969230] mmc0: SDHCI controller on PCI [0000:02:06.3] using PIO [ 10.982097] scsi host5: ata_piix [ 10.985757] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5080 irq 14 [ 10.994182] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5088 irq 15 [ 11.001538] ata6: port disabled--ignoring [ 11.013255] firewire_ohci 0000:02:06.1: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 11.023609] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-1/input0 [ 11.050745] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/0003:046D:C52B.0002/input/input5 [ 11.062960] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/0003:046D:C52B.0002/input/input6 [ 11.087153] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 11.130160] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/0003:046D:C52B.0002/input/input7 [ 11.143144] hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-1/input1 [ 11.159786] hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-1/input2 [ 11.172159] usbcore: registered new interface driver usbhid [ 11.178131] usbhid: USB HID core driver [ 11.178142] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PC05, max MWDMA2 [ 11.230956] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T10N PC05 PQ: 0 ANSI: 5 [ 11.291360] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-1/input2 [ 11.308205] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 11.316918] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 11.363641] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 11.423438] input: Logitech Wireless Device PID:101b Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input13 [ 11.438759] hid-generic 0003:046D:101B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Wireless Device PID:101b] on usb-0000:00:1d.2-1/input2:1 [ 11.468765] input: Logitech M705 as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input17 [ 11.484079] logitech-hidpp-device 0003:046D:101B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M705] on usb-0000:00:1d.2-1/input2:1 [ 11.546734] firewire_core 0000:02:06.1: created device fw0: GUID 00023f992905280e, S400 [ 11.727856] raid6: skip pq benchmark and using algorithm sse2x4 [ 11.736457] raid6: using ssse3x2 recovery algorithm [ 11.746596] xor: measuring software checksum speed [ 11.755042] prefetch64-sse : 10556 MB/sec [ 11.763163] generic_sse : 9057 MB/sec [ 11.770826] xor: using function: prefetch64-sse (10556 MB/sec) [ 11.896364] Btrfs loaded, crc32c=crc32c-generic, zoned=yes [ 11.905616] BTRFS: device fsid a5376a54-1964-4312-8894-9cf3432397fe devid 1 transid 219307 /dev/sda4 scanned by systemd-udevd (137) [ 12.086939] BTRFS info (device sda4): disk space caching is enabled [ 12.096216] BTRFS info (device sda4): has skinny extents [ 12.588570] BTRFS info (device sda4): start tree-log replay [ 13.550416] random: crng init done [ 15.364559] BTRFS info (device sda4): checking UUID tree [ 23.345958] fuse: init (API version 7.33) [ 23.618267] i2c /dev entries driver [ 23.710757] BTRFS info (device sda4): use zstd compression, level 3 [ 23.719981] BTRFS info (device sda4): disk space caching is enabled [ 23.885651] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 23.893889] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 23.945620] Asymmetric key parser 'pkcs8' registered [ 27.465499] wmi_bus wmi_bus-PNP0C14:00: WQBG data block query control method not found [ 27.736008] hp_accel: laptop model unknown, using default axes configuration [ 27.754287] lis3lv02d: 12 bits sensor found [ 27.879855] intel_rng: FWH not detected [ 27.910260] ACPI: \_SB_.C003.C085.C130.C14C: _BCQ is used instead of _BQC [ 27.926336] ACPI: video: Video Device [C130] (multi-head: yes rom: no post: no) [ 27.938980] acpi device:02: registered as cooling_device13 [ 27.951158] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input22 [ 27.987549] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input23 [ 28.028616] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000/0x0/0x0, board id: 0, fw id: 35522 [ 28.049897] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0 [ 28.103000] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input21 [ 28.212861] tpm_tis 00:03: 1.2 TPM (device-id 0xB, rev-id 16) [ 28.230571] parport_pc 00:02: reported by Plug and Play ACPI [ 28.239504] tpm tpm0: [Hardware Error]: Adjusting reported timeouts: A 750->750000us B 2000->2000000us C 750->750000us D 750->750000us [ 28.239514] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 28.275592] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x0000000000001042 (\_SB.C003.C004.C0BC) (20210105/utaddress-204) [ 28.300408] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 28.312238] ACPI: OSL: Resource conflict: System may be unstable or behave erratically [ 28.326294] ACPI Warning: SystemIO range 0x0000000000001130-0x000000000000113F conflicts with OpRegion 0x0000000000001100-0x000000000000113B (\_SB.C003.C004.C0CE) (20210105/utaddress-204) [ 28.346493] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 28.357901] ACPI: OSL: Resource conflict: System may be unstable or behave erratically [ 28.369378] ACPI Warning: SystemIO range 0x0000000000001100-0x000000000000112F conflicts with OpRegion 0x0000000000001100-0x000000000000113B (\_SB.C003.C004.C0CE) (20210105/utaddress-204) [ 28.393708] tpm tpm0: Operation Timed out [ 28.429868] tpm tpm0: Operation Timed out [ 28.437438] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 28.456695] tpm tpm0: Adjusting TPM timeout parameters. [ 28.467581] ACPI: OSL: Resource conflict: System may be unstable or behave erratically [ 28.541389] mousedev: PS/2 mouse device common for all mice [ 28.559580] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 28.626966] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 28.673517] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:309f] [ 28.690269] tg3 0000:08:00.0 eth0: Tigon3 [partno(BCM95751M) rev 4201] (PCI Express) MAC address 00:16:d4:ef:0a:d1 [ 28.734602] yenta_cardbus 0000:02:06.0: CardBus bridge to [bus 03] [ 28.745028] tg3 0000:08:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 28.758483] yenta_cardbus 0000:02:06.0: bridge window [io 0x8000-0x80ff] [ 28.768799] tg3 0000:08:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 28.779841] yenta_cardbus 0000:02:06.0: bridge window [io 0x8400-0x84ff] [ 28.790531] tg3 0000:08:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 28.800564] yenta_cardbus 0000:02:06.0: bridge window [mem 0xd8800000-0xd8bfffff] [ 28.811925] yenta_cardbus 0000:02:06.0: bridge window [mem 0xdc000000-0xdfffffff] [ 28.824788] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions [ 28.838539] yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI [ 28.849481] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI [ 28.859470] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01aa1b22, devctl 0x64 [ 29.024033] leds_ss4200: no LED devices found [ 29.109595] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0c68, PCI irq 18 [ 29.129567] yenta_cardbus 0000:02:06.0: Socket status: 30000006 [ 29.138729] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io 0x8000-0x8fff] [ 29.157134] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xf4200000-0xf45fffff] [ 29.172465] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4200000-0xf45fffff: [ 29.209902] excluding 0xf4200000-0xf423ffff [ 29.271135] input: PC Speaker as /devices/platform/pcspkr/input/input25 [ 29.301225] tpm tpm0: TPM is disabled/deactivated (0x7) [ 29.505248] Bluetooth: Core ver 2.22 [ 29.513251] NET: Registered protocol family 31 [ 29.526249] Bluetooth: HCI device and connection manager initialized [ 29.567551] Bluetooth: HCI socket layer initialized [ 29.579521] Bluetooth: L2CAP socket layer initialized [ 29.591981] Bluetooth: SCO socket layer initialized [ 29.783347] input: HP WMI hotkeys as /devices/virtual/input/input26 [ 29.914383] ppdev: user-space parallel port driver [ 29.937238] tg3 0000:08:00.0 ens1: renamed from eth0 [ 29.949264] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds [ 29.964362] iwl3945: Copyright(c) 2003-2011 Intel Corporation [ 29.973254] iwl3945: hw_scan is disabled [ 29.988992] iwl3945 0000:10:00.0: can't disable ASPM; OS doesn't have ASPM control [ 30.073006] iwl3945 0000:10:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels [ 30.083747] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 30.094042] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' [ 30.323300] gpio_ich gpio_ich.2.auto: GPIO from 462 to 511 [ 30.334064] iTCO_vendor_support: vendor-support=0 [ 30.504391] usbcore: registered new interface driver btusb [ 30.640426] iTCO_wdt iTCO_wdt.1.auto: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060) [ 30.660397] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 30.679880] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1981: line_outs=1 (0x5/0x0/0x0/0x0/0x0) type:speaker [ 30.694212] snd_hda_codec_analog hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 30.705322] snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x6/0x0/0x0/0x0/0x0) [ 30.715920] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0 [ 30.725020] snd_hda_codec_analog hdaudioC0D0: inputs: [ 30.733101] snd_hda_codec_analog hdaudioC0D0: Mic=0x8 [ 30.741283] snd_hda_codec_analog hdaudioC0D0: Internal Mic=0x18 [ 30.750259] snd_hda_codec_analog hdaudioC0D0: Line=0x9 [ 30.887272] intel_powerclamp: No package C-state available [ 30.935305] intel_powerclamp: No package C-state available [ 30.982776] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27 [ 30.997587] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28 [ 31.009175] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input29 [ 31.558325] Adding 8388604k swap on /dev/sda3. Priority:-2 extents:1 across:8388604k FS [ 117.296812] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 117.305347] Bluetooth: BNEP filters: protocol multicast [ 117.313743] Bluetooth: BNEP socket layer initialized [ 117.400250] NET: Registered protocol family 38 [ 118.213484] bond0: (slave ens1): Enslaving as a backup interface with a down link [ 118.567184] iwl3945 0000:10:00.0: loaded firmware version 15.32.2.9 [ 118.662019] bond0: (slave wlan0): Enslaving as a backup interface with a down link [ 119.032184] cryptd: max_cpu_qlen set to 1000 [ 119.580906] wlan0: authenticate with xx:xx:xx:xx:xx:xx [ 119.589653] wlan0: send auth to xx:xx:xx:xx:xx:xx (try 1/3) [ 119.596613] wlan0: authenticated [ 119.606525] wlan0: associate with xx:xx:xx:xx:xx:xx (try 1/3) [ 119.633164] wlan0: RX AssocResp from xx:xx:xx:xx:xx:xx (capab=0x11 status=0 aid=2) [ 119.642442] wlan0: associated [ 119.663314] bond0: (slave wlan0): link status definitely up, 0 Mbps full duplex [ 119.670645] bond0: (slave wlan0): making interface the new active one [ 119.677357] bond0: active interface up! [ 119.681225] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready Arch Linux 5.12.0-arch1-1 (ttyS0) tourmaline login: [ 136.800026] CE: hpet increased min_delta_ns to 20115 nsec [ 136.800348] CE: hpet increased min_delta_ns to 30172 nsec [ 136.800778] CE: hpet increased min_delta_ns to 45258 nsec [ 136.801052] CE: hpet increased min_delta_ns to 67887 nsec [ 138.051261] Bluetooth: RFCOMM TTY layer initialized [ 138.056161] Bluetooth: RFCOMM socket layer initialized [ 138.061543] Bluetooth: RFCOMM ver 1.11 [ 354.508851] logitech-hidpp-device 0003:046D:101B.0004: HID++ 1.0 device connected. [ 471.547135] perf: interrupt took too long (2522 > 2500), lowering kernel.perf_event_max_sample_rate to 79200 [ 529.637918] perf: interrupt took too long (3159 > 3152), lowering kernel.perf_event_max_sample_rate to 63300 [ 635.121300] perf: interrupt took too long (3950 > 3948), lowering kernel.perf_event_max_sample_rate to 50400 [ 895.657027] perf: interrupt took too long (4943 > 4937), lowering kernel.perf_event_max_sample_rate to 40200