LKML Archive on lore.kernel.org
 help / Atom feed
* [PATCH v2 0/2] RISC-V: Don't use a global include guard for uapi/asm/syscalls.
@ 2018-08-09 20:25 Palmer Dabbelt
  2018-08-09 20:25 ` [PATCH v2 1/2] RISC-V: Define sys_riscv_flush_icache when SMP=n Palmer Dabbelt
  2018-08-09 20:25 ` [PATCH v2 2/2] RISC-V: Don't use a global include guard for uapi/asm/syscalls.h Palmer Dabbelt
  0 siblings, 2 replies; 10+ messages in thread
From: Palmer Dabbelt @ 2018-08-09 20:25 UTC (permalink / raw)
  To: Christoph Hellwig, linux
  Cc: Palmer Dabbelt, aou, Arnd Bergmann, tklauser, Andrew Waterman,
	dan.carpenter, linux, linux-riscv, linux-kernel

It turns out that we weren't actually hooking sys_riscv_flush_icache
into the syscall table, which results in any flush_icache() call that
escapes the vDSO to silently do nothing.

Changes since v1:

* sys_riscv_flush_icache is now defined even when SMP=n, which allows
  this patch set to build against SMP=n and SMP=y.


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v2 1/2] RISC-V: Define sys_riscv_flush_icache when SMP=n
  2018-08-09 20:25 [PATCH v2 0/2] RISC-V: Don't use a global include guard for uapi/asm/syscalls Palmer Dabbelt
@ 2018-08-09 20:25 ` Palmer Dabbelt
  2018-08-09 21:20   ` Guenter Roeck
  2018-08-09 20:25 ` [PATCH v2 2/2] RISC-V: Don't use a global include guard for uapi/asm/syscalls.h Palmer Dabbelt
  1 sibling, 1 reply; 10+ messages in thread
From: Palmer Dabbelt @ 2018-08-09 20:25 UTC (permalink / raw)
  To: Christoph Hellwig, linux
  Cc: Palmer Dabbelt, aou, Arnd Bergmann, tklauser, Andrew Waterman,
	dan.carpenter, linux, linux-riscv, linux-kernel,
	Christoph Hellwig

This would be necessary to make non-SMP builds work, but there is
another error in the implementation of our syscall linkage that actually
just causes sys_riscv_flush_icache to never build.  I've build tested
this on allnoconfig and allnoconfig+SMP=y, as well as defconfig like
normal.

CC: Christoph Hellwig <hch@infradead.org>
CC: Guenter Roeck <linux@roeck-us.net>
In-Reply-To: <20180809055830.GA17533@infradead.org>
In-Reply-To: <20180809132612.GA31058@roeck-us.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
---
 arch/riscv/include/asm/vdso.h |  2 --
 arch/riscv/kernel/sys_riscv.c | 10 ++++++++--
 2 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/riscv/include/asm/vdso.h b/arch/riscv/include/asm/vdso.h
index 541544d64c33..ec6180a4b55d 100644
--- a/arch/riscv/include/asm/vdso.h
+++ b/arch/riscv/include/asm/vdso.h
@@ -38,8 +38,6 @@ struct vdso_data {
 	(void __user *)((unsigned long)(base) + __vdso_##name);			\
 })
 
-#ifdef CONFIG_SMP
 asmlinkage long sys_riscv_flush_icache(uintptr_t, uintptr_t, uintptr_t);
-#endif
 
 #endif /* _ASM_RISCV_VDSO_H */
diff --git a/arch/riscv/kernel/sys_riscv.c b/arch/riscv/kernel/sys_riscv.c
index f7181ed8aafc..180da8d4e14a 100644
--- a/arch/riscv/kernel/sys_riscv.c
+++ b/arch/riscv/kernel/sys_riscv.c
@@ -48,7 +48,6 @@ SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len,
 }
 #endif /* !CONFIG_64BIT */
 
-#ifdef CONFIG_SMP
 /*
  * Allows the instruction cache to be flushed from userspace.  Despite RISC-V
  * having a direct 'fence.i' instruction available to userspace (which we
@@ -66,15 +65,22 @@ SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len,
 SYSCALL_DEFINE3(riscv_flush_icache, uintptr_t, start, uintptr_t, end,
 	uintptr_t, flags)
 {
+#ifdef CONFIG_SMP
 	struct mm_struct *mm = current->mm;
 	bool local = (flags & SYS_RISCV_FLUSH_ICACHE_LOCAL) != 0;
+#endif
 
 	/* Check the reserved flags. */
 	if (unlikely(flags & ~SYS_RISCV_FLUSH_ICACHE_ALL))
 		return -EINVAL;
 
+	/*
+	 * Without CONFIG_SMP flush_icache_mm is a NOP, which generates unused
+	 * variable warnings all over this function.
+	 */
+#ifdef CONFIG_SMP
 	flush_icache_mm(mm, local);
+#endif
 
 	return 0;
 }
-#endif
-- 
2.16.4


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v2 2/2] RISC-V: Don't use a global include guard for uapi/asm/syscalls.h
  2018-08-09 20:25 [PATCH v2 0/2] RISC-V: Don't use a global include guard for uapi/asm/syscalls Palmer Dabbelt
  2018-08-09 20:25 ` [PATCH v2 1/2] RISC-V: Define sys_riscv_flush_icache when SMP=n Palmer Dabbelt
@ 2018-08-09 20:25 ` Palmer Dabbelt
  2018-08-09 21:24   ` Guenter Roeck
  1 sibling, 1 reply; 10+ messages in thread
From: Palmer Dabbelt @ 2018-08-09 20:25 UTC (permalink / raw)
  To: Christoph Hellwig, linux
  Cc: Palmer Dabbelt, aou, Arnd Bergmann, tklauser, Andrew Waterman,
	dan.carpenter, linux, linux-riscv, linux-kernel, Marcus Comstedt

This file is expected to be included multiple times in the same file in
order to allow the __SYSCALL macro to generate system call tables.  With
a global include guard we end up missing __NR_riscv_flush_icache in the
syscall table, which results in icache flushes that escape the vDSO call
to not actually do anything.

The fix is to move to per-#define include guards, which allows the
system call tables to actually be populated.  Thanks to Macrus Comstedt
for finding and fixing the bug!

I also went ahead and fixed the SPDX header to use a //-style comment,
which I've been told is the canonical way to do it.

Cc: Marcus Comstedt <marcus@mc.pp.se>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
---
 arch/riscv/include/asm/unistd.h        |  5 +++++
 arch/riscv/include/uapi/asm/syscalls.h | 15 +++++++++------
 2 files changed, 14 insertions(+), 6 deletions(-)

diff --git a/arch/riscv/include/asm/unistd.h b/arch/riscv/include/asm/unistd.h
index 080fb28061de..0caea01d5cca 100644
--- a/arch/riscv/include/asm/unistd.h
+++ b/arch/riscv/include/asm/unistd.h
@@ -11,6 +11,11 @@
  *   GNU General Public License for more details.
  */
 
+/*
+ * There is explicitly no include guard here because this file is expected to
+ * be included multiple times.  See uapi/asm/syscalls.h for more info.
+ */
+
 #define __ARCH_WANT_SYS_CLONE
 #include <uapi/asm/unistd.h>
 #include <uapi/asm/syscalls.h>
diff --git a/arch/riscv/include/uapi/asm/syscalls.h b/arch/riscv/include/uapi/asm/syscalls.h
index 818655b0d535..690beb002d1d 100644
--- a/arch/riscv/include/uapi/asm/syscalls.h
+++ b/arch/riscv/include/uapi/asm/syscalls.h
@@ -1,10 +1,13 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+// SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2017 SiFive
+ * Copyright (C) 2017-2018 SiFive
  */
 
-#ifndef _ASM__UAPI__SYSCALLS_H
-#define _ASM__UAPI__SYSCALLS_H
+/*
+ * There is explicitly no include guard here because this file is expected to
+ * be included multiple times in order to define the syscall macros via
+ * __SYSCALL.
+ */
 
 /*
  * Allows the instruction cache to be flushed from userspace.  Despite RISC-V
@@ -20,7 +23,7 @@
  * caller.  We don't currently do anything with the address range, that's just
  * in there for forwards compatibility.
  */
+#ifndef __NR_riscv_flush_icache
 #define __NR_riscv_flush_icache (__NR_arch_specific_syscall + 15)
-__SYSCALL(__NR_riscv_flush_icache, sys_riscv_flush_icache)
-
 #endif
+__SYSCALL(__NR_riscv_flush_icache, sys_riscv_flush_icache)
-- 
2.16.4


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 1/2] RISC-V: Define sys_riscv_flush_icache when SMP=n
  2018-08-09 20:25 ` [PATCH v2 1/2] RISC-V: Define sys_riscv_flush_icache when SMP=n Palmer Dabbelt
@ 2018-08-09 21:20   ` Guenter Roeck
  0 siblings, 0 replies; 10+ messages in thread
From: Guenter Roeck @ 2018-08-09 21:20 UTC (permalink / raw)
  To: Palmer Dabbelt
  Cc: Christoph Hellwig, aou, Arnd Bergmann, tklauser, Andrew Waterman,
	dan.carpenter, linux, linux-riscv, linux-kernel

On Thu, Aug 09, 2018 at 01:25:23PM -0700, Palmer Dabbelt wrote:
> This would be necessary to make non-SMP builds work, but there is
> another error in the implementation of our syscall linkage that actually
> just causes sys_riscv_flush_icache to never build.  I've build tested
> this on allnoconfig and allnoconfig+SMP=y, as well as defconfig like
> normal.
> 
> CC: Christoph Hellwig <hch@infradead.org>
> CC: Guenter Roeck <linux@roeck-us.net>
> In-Reply-To: <20180809055830.GA17533@infradead.org>
> In-Reply-To: <20180809132612.GA31058@roeck-us.net>
> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

[Compile-]Tested-by: Guenter Roeck <linux@roeck-us.net>

> ---
>  arch/riscv/include/asm/vdso.h |  2 --
>  arch/riscv/kernel/sys_riscv.c | 10 ++++++++--
>  2 files changed, 8 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/riscv/include/asm/vdso.h b/arch/riscv/include/asm/vdso.h
> index 541544d64c33..ec6180a4b55d 100644
> --- a/arch/riscv/include/asm/vdso.h
> +++ b/arch/riscv/include/asm/vdso.h
> @@ -38,8 +38,6 @@ struct vdso_data {
>  	(void __user *)((unsigned long)(base) + __vdso_##name);			\
>  })
>  
> -#ifdef CONFIG_SMP
>  asmlinkage long sys_riscv_flush_icache(uintptr_t, uintptr_t, uintptr_t);
> -#endif
>  
>  #endif /* _ASM_RISCV_VDSO_H */
> diff --git a/arch/riscv/kernel/sys_riscv.c b/arch/riscv/kernel/sys_riscv.c
> index f7181ed8aafc..180da8d4e14a 100644
> --- a/arch/riscv/kernel/sys_riscv.c
> +++ b/arch/riscv/kernel/sys_riscv.c
> @@ -48,7 +48,6 @@ SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len,
>  }
>  #endif /* !CONFIG_64BIT */
>  
> -#ifdef CONFIG_SMP
>  /*
>   * Allows the instruction cache to be flushed from userspace.  Despite RISC-V
>   * having a direct 'fence.i' instruction available to userspace (which we
> @@ -66,15 +65,22 @@ SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len,
>  SYSCALL_DEFINE3(riscv_flush_icache, uintptr_t, start, uintptr_t, end,
>  	uintptr_t, flags)
>  {
> +#ifdef CONFIG_SMP
>  	struct mm_struct *mm = current->mm;
>  	bool local = (flags & SYS_RISCV_FLUSH_ICACHE_LOCAL) != 0;
> +#endif
>  
>  	/* Check the reserved flags. */
>  	if (unlikely(flags & ~SYS_RISCV_FLUSH_ICACHE_ALL))
>  		return -EINVAL;
>  
> +	/*
> +	 * Without CONFIG_SMP flush_icache_mm is a NOP, which generates unused
> +	 * variable warnings all over this function.
> +	 */
> +#ifdef CONFIG_SMP
>  	flush_icache_mm(mm, local);
> +#endif
>  
>  	return 0;
>  }
> -#endif
> -- 
> 2.16.4
> 

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 2/2] RISC-V: Don't use a global include guard for uapi/asm/syscalls.h
  2018-08-09 20:25 ` [PATCH v2 2/2] RISC-V: Don't use a global include guard for uapi/asm/syscalls.h Palmer Dabbelt
@ 2018-08-09 21:24   ` Guenter Roeck
  2018-08-10  1:03     ` Palmer Dabbelt
  0 siblings, 1 reply; 10+ messages in thread
From: Guenter Roeck @ 2018-08-09 21:24 UTC (permalink / raw)
  To: Palmer Dabbelt
  Cc: Christoph Hellwig, aou, Arnd Bergmann, tklauser, Andrew Waterman,
	dan.carpenter, linux, linux-riscv, linux-kernel, Marcus Comstedt

On Thu, Aug 09, 2018 at 01:25:24PM -0700, Palmer Dabbelt wrote:
> This file is expected to be included multiple times in the same file in
> order to allow the __SYSCALL macro to generate system call tables.  With
> a global include guard we end up missing __NR_riscv_flush_icache in the
> syscall table, which results in icache flushes that escape the vDSO call
> to not actually do anything.
> 
> The fix is to move to per-#define include guards, which allows the
> system call tables to actually be populated.  Thanks to Macrus Comstedt
> for finding and fixing the bug!
> 
> I also went ahead and fixed the SPDX header to use a //-style comment,
> which I've been told is the canonical way to do it.
> 
> Cc: Marcus Comstedt <marcus@mc.pp.se>
> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

[Compile-]Tested-by: Guenter Roeck <linux@roeck-us.net>

on top of linux-next after reverting the version of the patch there.

I also tried to run the resulting image (defconfig) with qemu (built
from https://github.com/riscv/riscv-qemu.git), but that still doesn't
work. I assume there are still some patches missing ?

Thanks,
Guenter

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 2/2] RISC-V: Don't use a global include guard for uapi/asm/syscalls.h
  2018-08-09 21:24   ` Guenter Roeck
@ 2018-08-10  1:03     ` Palmer Dabbelt
  2018-08-10  2:40       ` Guenter Roeck
  0 siblings, 1 reply; 10+ messages in thread
From: Palmer Dabbelt @ 2018-08-10  1:03 UTC (permalink / raw)
  To: linux
  Cc: Christoph Hellwig, aou, Arnd Bergmann, tklauser, Andrew Waterman,
	dan.carpenter, linux, linux-riscv, linux-kernel, marcus

On Thu, 09 Aug 2018 14:24:22 PDT (-0700), linux@roeck-us.net wrote:
> On Thu, Aug 09, 2018 at 01:25:24PM -0700, Palmer Dabbelt wrote:
>> This file is expected to be included multiple times in the same file in
>> order to allow the __SYSCALL macro to generate system call tables.  With
>> a global include guard we end up missing __NR_riscv_flush_icache in the
>> syscall table, which results in icache flushes that escape the vDSO call
>> to not actually do anything.
>>
>> The fix is to move to per-#define include guards, which allows the
>> system call tables to actually be populated.  Thanks to Macrus Comstedt
>> for finding and fixing the bug!
>>
>> I also went ahead and fixed the SPDX header to use a //-style comment,
>> which I've been told is the canonical way to do it.
>>
>> Cc: Marcus Comstedt <marcus@mc.pp.se>
>> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
>
> [Compile-]Tested-by: Guenter Roeck <linux@roeck-us.net>
>
> on top of linux-next after reverting the version of the patch there.
>
> I also tried to run the resulting image (defconfig) with qemu (built
> from https://github.com/riscv/riscv-qemu.git), but that still doesn't
> work. I assume there are still some patches missing ?

Do you have the PLIC patches?  They'll be necessary to make this all work, and 
there's a v4 out now that when combined with for-next should get you to 
userspace.

    https://lore.kernel.org/lkml/20180809075602.989-1-hch@lst.de/T/#u

Also, what is your methodology?  I follow

    https://wiki.qemu.org/Documentation/Platforms/RISCV

and could could natively compile and run hello world with an earlier version of 
Christoph's patch set, which is really only cosmetically different than the v4.  
I use qemu's master branch as well, which when I tried was exactly 3.0.0-rc3.

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 2/2] RISC-V: Don't use a global include guard for uapi/asm/syscalls.h
  2018-08-10  1:03     ` Palmer Dabbelt
@ 2018-08-10  2:40       ` Guenter Roeck
  2018-08-10  3:59         ` Palmer Dabbelt
  0 siblings, 1 reply; 10+ messages in thread
From: Guenter Roeck @ 2018-08-10  2:40 UTC (permalink / raw)
  To: Palmer Dabbelt
  Cc: Christoph Hellwig, aou, Arnd Bergmann, tklauser, Andrew Waterman,
	dan.carpenter, linux, linux-riscv, linux-kernel, marcus

On 08/09/2018 06:03 PM, Palmer Dabbelt wrote:
> On Thu, 09 Aug 2018 14:24:22 PDT (-0700), linux@roeck-us.net wrote:
>> On Thu, Aug 09, 2018 at 01:25:24PM -0700, Palmer Dabbelt wrote:
>>> This file is expected to be included multiple times in the same file in
>>> order to allow the __SYSCALL macro to generate system call tables.  With
>>> a global include guard we end up missing __NR_riscv_flush_icache in the
>>> syscall table, which results in icache flushes that escape the vDSO call
>>> to not actually do anything.
>>>
>>> The fix is to move to per-#define include guards, which allows the
>>> system call tables to actually be populated.  Thanks to Macrus Comstedt
>>> for finding and fixing the bug!
>>>
>>> I also went ahead and fixed the SPDX header to use a //-style comment,
>>> which I've been told is the canonical way to do it.
>>>
>>> Cc: Marcus Comstedt <marcus@mc.pp.se>
>>> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
>>
>> [Compile-]Tested-by: Guenter Roeck <linux@roeck-us.net>
>>
>> on top of linux-next after reverting the version of the patch there.
>>
>> I also tried to run the resulting image (defconfig) with qemu (built
>> from https://github.com/riscv/riscv-qemu.git), but that still doesn't
>> work. I assume there are still some patches missing ?
> 
> Do you have the PLIC patches?  They'll be necessary to make this all work, and there's a v4 out now that when combined with for-next should get you to userspace.
> 
>     https://lore.kernel.org/lkml/20180809075602.989-1-hch@lst.de/T/#u
> 
Yes, after merging that branch on top of linux-next I can boot into Linux.
If I add my "riscv: Drop setup_initrd" patch as well, I can boot using
initrd, otherwise I have to use virtio-blk-device.

> Also, what is your methodology?  I follow
> 
>     https://wiki.qemu.org/Documentation/Platforms/RISCV
> 
> and could could natively compile and run hello world with an earlier version of Christoph's patch set, which is really only cosmetically different than the v4. I use qemu's master branch as well, which when I tried was exactly 3.0.0-rc3.
> 

That doesn't work for me, possibly because I don't specify a bbl
image with -kernel but vmlinux (using -bios for the bbl image).
I use branch qemu-for-upstream of https://github.com/riscv/riscv-qemu.git.

Guenter

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 2/2] RISC-V: Don't use a global include guard for uapi/asm/syscalls.h
  2018-08-10  2:40       ` Guenter Roeck
@ 2018-08-10  3:59         ` Palmer Dabbelt
  2018-08-10  4:11           ` Guenter Roeck
  2018-08-10  4:53           ` Guenter Roeck
  0 siblings, 2 replies; 10+ messages in thread
From: Palmer Dabbelt @ 2018-08-10  3:59 UTC (permalink / raw)
  To: linux
  Cc: Christoph Hellwig, aou, Arnd Bergmann, tklauser, Andrew Waterman,
	dan.carpenter, linux, linux-riscv, linux-kernel, marcus

On Thu, 09 Aug 2018 19:40:55 PDT (-0700), linux@roeck-us.net wrote:
> On 08/09/2018 06:03 PM, Palmer Dabbelt wrote:
>> On Thu, 09 Aug 2018 14:24:22 PDT (-0700), linux@roeck-us.net wrote:
>>> On Thu, Aug 09, 2018 at 01:25:24PM -0700, Palmer Dabbelt wrote:
>>>> This file is expected to be included multiple times in the same file in
>>>> order to allow the __SYSCALL macro to generate system call tables.  With
>>>> a global include guard we end up missing __NR_riscv_flush_icache in the
>>>> syscall table, which results in icache flushes that escape the vDSO call
>>>> to not actually do anything.
>>>>
>>>> The fix is to move to per-#define include guards, which allows the
>>>> system call tables to actually be populated.  Thanks to Macrus Comstedt
>>>> for finding and fixing the bug!
>>>>
>>>> I also went ahead and fixed the SPDX header to use a //-style comment,
>>>> which I've been told is the canonical way to do it.
>>>>
>>>> Cc: Marcus Comstedt <marcus@mc.pp.se>
>>>> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
>>>
>>> [Compile-]Tested-by: Guenter Roeck <linux@roeck-us.net>
>>>
>>> on top of linux-next after reverting the version of the patch there.
>>>
>>> I also tried to run the resulting image (defconfig) with qemu (built
>>> from https://github.com/riscv/riscv-qemu.git), but that still doesn't
>>> work. I assume there are still some patches missing ?
>>
>> Do you have the PLIC patches?  They'll be necessary to make this all work, and there's a v4 out now that when combined with for-next should get you to userspace.
>>
>>     https://lore.kernel.org/lkml/20180809075602.989-1-hch@lst.de/T/#u
>>
> Yes, after merging that branch on top of linux-next I can boot into Linux.
> If I add my "riscv: Drop setup_initrd" patch as well, I can boot using
> initrd, otherwise I have to use virtio-blk-device.

Awesome!  If you patch isn't on for-next then I must have missed it, do you 
mind sending me a pointer?  I can't find any references in my email.

>> Also, what is your methodology?  I follow
>>
>>     https://wiki.qemu.org/Documentation/Platforms/RISCV
>>
>> and could could natively compile and run hello world with an earlier version of Christoph's patch set, which is really only cosmetically different than the v4. I use qemu's master branch as well, which when I tried was exactly 3.0.0-rc3.
>>
>
> That doesn't work for me, possibly because I don't specify a bbl
> image with -kernel but vmlinux (using -bios for the bbl image).
> I use branch qemu-for-upstream of https://github.com/riscv/riscv-qemu.git.
>
> Guenter

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 2/2] RISC-V: Don't use a global include guard for uapi/asm/syscalls.h
  2018-08-10  3:59         ` Palmer Dabbelt
@ 2018-08-10  4:11           ` Guenter Roeck
  2018-08-10  4:53           ` Guenter Roeck
  1 sibling, 0 replies; 10+ messages in thread
From: Guenter Roeck @ 2018-08-10  4:11 UTC (permalink / raw)
  To: Palmer Dabbelt
  Cc: Christoph Hellwig, aou, Arnd Bergmann, tklauser, Andrew Waterman,
	dan.carpenter, linux, linux-riscv, linux-kernel, marcus

On 08/09/2018 08:59 PM, Palmer Dabbelt wrote:
> On Thu, 09 Aug 2018 19:40:55 PDT (-0700), linux@roeck-us.net wrote:
>> On 08/09/2018 06:03 PM, Palmer Dabbelt wrote:
>>> On Thu, 09 Aug 2018 14:24:22 PDT (-0700), linux@roeck-us.net wrote:
>>>> On Thu, Aug 09, 2018 at 01:25:24PM -0700, Palmer Dabbelt wrote:
>>>>> This file is expected to be included multiple times in the same file in
>>>>> order to allow the __SYSCALL macro to generate system call tables.  With
>>>>> a global include guard we end up missing __NR_riscv_flush_icache in the
>>>>> syscall table, which results in icache flushes that escape the vDSO call
>>>>> to not actually do anything.
>>>>>
>>>>> The fix is to move to per-#define include guards, which allows the
>>>>> system call tables to actually be populated.  Thanks to Macrus Comstedt
>>>>> for finding and fixing the bug!
>>>>>
>>>>> I also went ahead and fixed the SPDX header to use a //-style comment,
>>>>> which I've been told is the canonical way to do it.
>>>>>
>>>>> Cc: Marcus Comstedt <marcus@mc.pp.se>
>>>>> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
>>>>
>>>> [Compile-]Tested-by: Guenter Roeck <linux@roeck-us.net>
>>>>
>>>> on top of linux-next after reverting the version of the patch there.
>>>>
>>>> I also tried to run the resulting image (defconfig) with qemu (built
>>>> from https://github.com/riscv/riscv-qemu.git), but that still doesn't
>>>> work. I assume there are still some patches missing ?
>>>
>>> Do you have the PLIC patches?  They'll be necessary to make this all work, and there's a v4 out now that when combined with for-next should get you to userspace.
>>>
>>>     https://lore.kernel.org/lkml/20180809075602.989-1-hch@lst.de/T/#u
>>>
>> Yes, after merging that branch on top of linux-next I can boot into Linux.
>> If I add my "riscv: Drop setup_initrd" patch as well, I can boot using
>> initrd, otherwise I have to use virtio-blk-device.
> 
> Awesome!  If you patch isn't on for-next then I must have missed it, do you mind sending me a pointer?  I can't find any references in my email.
> 
Hmm ... weird. I don't find it either. Maybe I sent it only in my dreams.
I'll send it out for review.

Guenter

>>> Also, what is your methodology?  I follow
>>>
>>>     https://wiki.qemu.org/Documentation/Platforms/RISCV
>>>
>>> and could could natively compile and run hello world with an earlier version of Christoph's patch set, which is really only cosmetically different than the v4. I use qemu's master branch as well, which when I tried was exactly 3.0.0-rc3.
>>>
>>
>> That doesn't work for me, possibly because I don't specify a bbl
>> image with -kernel but vmlinux (using -bios for the bbl image).
>> I use branch qemu-for-upstream of https://github.com/riscv/riscv-qemu.git.
>>
>> Guenter
> 


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 2/2] RISC-V: Don't use a global include guard for uapi/asm/syscalls.h
  2018-08-10  3:59         ` Palmer Dabbelt
  2018-08-10  4:11           ` Guenter Roeck
@ 2018-08-10  4:53           ` Guenter Roeck
  1 sibling, 0 replies; 10+ messages in thread
From: Guenter Roeck @ 2018-08-10  4:53 UTC (permalink / raw)
  To: Palmer Dabbelt
  Cc: Christoph Hellwig, aou, Arnd Bergmann, tklauser, Andrew Waterman,
	dan.carpenter, linux, linux-riscv, linux-kernel, marcus

On 08/09/2018 08:59 PM, Palmer Dabbelt wrote:
[ ... ]
>>> Also, what is your methodology?  I follow
>>>
>>>     https://wiki.qemu.org/Documentation/Platforms/RISCV

Here are my qemu command lines:

qemu-system-riscv64 -M virt -m 512M -no-reboot -bios bbl \
	-kernel vmlinux -netdev user,id=net0 -device virtio-net-device,netdev=net0 \
	-initrd rootfs.cpio \
	-append 'rdinit=/sbin/init earlycon console=ttyS0,115200' \
	-nographic -monitor none

qemu-system-riscv64 -M virt -m 512M -no-reboot -bios bbl \
	-kernel vmlinux -netdev user,id=net0 -device virtio-net-device,netdev=net0 \
	-device virtio-blk-device,drive=d0 \
	-drive file=rootfs.ext2,if=none,id=d0,format=raw \
	-append 'root=/dev/vda rw earlycon console=ttyS0,115200' \
	-nographic -monitor none

Root file systems and the bbl binary are published at
	https://github.com/groeck/linux-build-test/tree/master/rootfs/riscv64

Hint: If you specify "noreboot" as additional command line option, you'll end up in a shell.

Qemu version:
	https://github.com/riscv/riscv-qemu.git branch 'v3.0.0-local-riscv'

Guenter

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, back to index

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-08-09 20:25 [PATCH v2 0/2] RISC-V: Don't use a global include guard for uapi/asm/syscalls Palmer Dabbelt
2018-08-09 20:25 ` [PATCH v2 1/2] RISC-V: Define sys_riscv_flush_icache when SMP=n Palmer Dabbelt
2018-08-09 21:20   ` Guenter Roeck
2018-08-09 20:25 ` [PATCH v2 2/2] RISC-V: Don't use a global include guard for uapi/asm/syscalls.h Palmer Dabbelt
2018-08-09 21:24   ` Guenter Roeck
2018-08-10  1:03     ` Palmer Dabbelt
2018-08-10  2:40       ` Guenter Roeck
2018-08-10  3:59         ` Palmer Dabbelt
2018-08-10  4:11           ` Guenter Roeck
2018-08-10  4:53           ` Guenter Roeck

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox