* [PATCH] clk: ti: divider: Add the table parsing to get the best divider value
@ 2016-12-02 9:05 Keerthy
2017-01-25 10:37 ` Keerthy
2017-01-27 0:03 ` Stephen Boyd
0 siblings, 2 replies; 4+ messages in thread
From: Keerthy @ 2016-12-02 9:05 UTC (permalink / raw)
To: t-kristo
Cc: mturquette, sboyd, linux-omap, linux-clk, linux-kernel, j-keerthy
Currently the divider selection logic blindly divides the parent_rate
by the clk rate and gives the divider value for the divider clocks
which do not have the CLK_SET_RATE_PARENT flag set. Add the clk divider
table parsing to get the closest divider available in the table
provided via Device tree.
The code is pretty much taken from: drivers/clk/clk-divider.c.
and used here to fix up the best divider selection logic.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reported-by: Richard Woodruff <r-woodruff2@ti.com>
---
drivers/clk/ti/divider.c | 31 ++++++++++++++++++++++++++++++-
1 file changed, 30 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c
index b4e5de1..6bb8778 100644
--- a/drivers/clk/ti/divider.c
+++ b/drivers/clk/ti/divider.c
@@ -140,6 +140,35 @@ static bool _is_valid_div(struct clk_divider *divider, unsigned int div)
return true;
}
+static int _div_round_up(const struct clk_div_table *table,
+ unsigned long parent_rate, unsigned long rate)
+{
+ const struct clk_div_table *clkt;
+ int up = INT_MAX;
+ int div = DIV_ROUND_UP_ULL((u64)parent_rate, rate);
+
+ for (clkt = table; clkt->div; clkt++) {
+ if (clkt->div == div)
+ return clkt->div;
+ else if (clkt->div < div)
+ continue;
+
+ if ((clkt->div - div) < (up - div))
+ up = clkt->div;
+ }
+
+ return up;
+}
+
+static int _div_round(const struct clk_div_table *table,
+ unsigned long parent_rate, unsigned long rate)
+{
+ if (!table)
+ return DIV_ROUND_UP(parent_rate, rate);
+
+ return _div_round_up(table, parent_rate, rate);
+}
+
static int ti_clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
unsigned long *best_parent_rate)
{
@@ -155,7 +184,7 @@ static int ti_clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) {
parent_rate = *best_parent_rate;
- bestdiv = DIV_ROUND_UP(parent_rate, rate);
+ bestdiv = _div_round(divider->table, parent_rate, rate);
bestdiv = bestdiv == 0 ? 1 : bestdiv;
bestdiv = bestdiv > maxdiv ? maxdiv : bestdiv;
return bestdiv;
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] clk: ti: divider: Add the table parsing to get the best divider value
2016-12-02 9:05 [PATCH] clk: ti: divider: Add the table parsing to get the best divider value Keerthy
@ 2017-01-25 10:37 ` Keerthy
2017-01-25 13:05 ` Tero Kristo
2017-01-27 0:03 ` Stephen Boyd
1 sibling, 1 reply; 4+ messages in thread
From: Keerthy @ 2017-01-25 10:37 UTC (permalink / raw)
To: t-kristo; +Cc: mturquette, sboyd, linux-omap, linux-clk, linux-kernel
On Friday 02 December 2016 02:35 PM, Keerthy wrote:
> Currently the divider selection logic blindly divides the parent_rate
> by the clk rate and gives the divider value for the divider clocks
> which do not have the CLK_SET_RATE_PARENT flag set. Add the clk divider
> table parsing to get the closest divider available in the table
> provided via Device tree.
>
> The code is pretty much taken from: drivers/clk/clk-divider.c.
> and used here to fix up the best divider selection logic.
A gentle ping on this patch. This applies cleanly on the next branch as
on today. Let me know if this needs to be rebased.
- Keerthy
>
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> Reported-by: Richard Woodruff <r-woodruff2@ti.com>
> ---
> drivers/clk/ti/divider.c | 31 ++++++++++++++++++++++++++++++-
> 1 file changed, 30 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c
> index b4e5de1..6bb8778 100644
> --- a/drivers/clk/ti/divider.c
> +++ b/drivers/clk/ti/divider.c
> @@ -140,6 +140,35 @@ static bool _is_valid_div(struct clk_divider *divider, unsigned int div)
> return true;
> }
>
> +static int _div_round_up(const struct clk_div_table *table,
> + unsigned long parent_rate, unsigned long rate)
> +{
> + const struct clk_div_table *clkt;
> + int up = INT_MAX;
> + int div = DIV_ROUND_UP_ULL((u64)parent_rate, rate);
> +
> + for (clkt = table; clkt->div; clkt++) {
> + if (clkt->div == div)
> + return clkt->div;
> + else if (clkt->div < div)
> + continue;
> +
> + if ((clkt->div - div) < (up - div))
> + up = clkt->div;
> + }
> +
> + return up;
> +}
> +
> +static int _div_round(const struct clk_div_table *table,
> + unsigned long parent_rate, unsigned long rate)
> +{
> + if (!table)
> + return DIV_ROUND_UP(parent_rate, rate);
> +
> + return _div_round_up(table, parent_rate, rate);
> +}
> +
> static int ti_clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
> unsigned long *best_parent_rate)
> {
> @@ -155,7 +184,7 @@ static int ti_clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
>
> if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) {
> parent_rate = *best_parent_rate;
> - bestdiv = DIV_ROUND_UP(parent_rate, rate);
> + bestdiv = _div_round(divider->table, parent_rate, rate);
> bestdiv = bestdiv == 0 ? 1 : bestdiv;
> bestdiv = bestdiv > maxdiv ? maxdiv : bestdiv;
> return bestdiv;
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] clk: ti: divider: Add the table parsing to get the best divider value
2017-01-25 10:37 ` Keerthy
@ 2017-01-25 13:05 ` Tero Kristo
0 siblings, 0 replies; 4+ messages in thread
From: Tero Kristo @ 2017-01-25 13:05 UTC (permalink / raw)
To: Keerthy; +Cc: mturquette, sboyd, linux-omap, linux-clk, linux-kernel
On 25/01/17 12:37, Keerthy wrote:
>
>
> On Friday 02 December 2016 02:35 PM, Keerthy wrote:
>> Currently the divider selection logic blindly divides the parent_rate
>> by the clk rate and gives the divider value for the divider clocks
>> which do not have the CLK_SET_RATE_PARENT flag set. Add the clk divider
>> table parsing to get the closest divider available in the table
>> provided via Device tree.
>>
>> The code is pretty much taken from: drivers/clk/clk-divider.c.
>> and used here to fix up the best divider selection logic.
>
> A gentle ping on this patch. This applies cleanly on the next branch as
> on today. Let me know if this needs to be rebased.
>
> - Keerthy
>
>>
>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>> Reported-by: Richard Woodruff <r-woodruff2@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Stephen / Michael, can you pick this up?
-Tero
>> ---
>> drivers/clk/ti/divider.c | 31 ++++++++++++++++++++++++++++++-
>> 1 file changed, 30 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c
>> index b4e5de1..6bb8778 100644
>> --- a/drivers/clk/ti/divider.c
>> +++ b/drivers/clk/ti/divider.c
>> @@ -140,6 +140,35 @@ static bool _is_valid_div(struct clk_divider
>> *divider, unsigned int div)
>> return true;
>> }
>>
>> +static int _div_round_up(const struct clk_div_table *table,
>> + unsigned long parent_rate, unsigned long rate)
>> +{
>> + const struct clk_div_table *clkt;
>> + int up = INT_MAX;
>> + int div = DIV_ROUND_UP_ULL((u64)parent_rate, rate);
>> +
>> + for (clkt = table; clkt->div; clkt++) {
>> + if (clkt->div == div)
>> + return clkt->div;
>> + else if (clkt->div < div)
>> + continue;
>> +
>> + if ((clkt->div - div) < (up - div))
>> + up = clkt->div;
>> + }
>> +
>> + return up;
>> +}
>> +
>> +static int _div_round(const struct clk_div_table *table,
>> + unsigned long parent_rate, unsigned long rate)
>> +{
>> + if (!table)
>> + return DIV_ROUND_UP(parent_rate, rate);
>> +
>> + return _div_round_up(table, parent_rate, rate);
>> +}
>> +
>> static int ti_clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
>> unsigned long *best_parent_rate)
>> {
>> @@ -155,7 +184,7 @@ static int ti_clk_divider_bestdiv(struct clk_hw
>> *hw, unsigned long rate,
>>
>> if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) {
>> parent_rate = *best_parent_rate;
>> - bestdiv = DIV_ROUND_UP(parent_rate, rate);
>> + bestdiv = _div_round(divider->table, parent_rate, rate);
>> bestdiv = bestdiv == 0 ? 1 : bestdiv;
>> bestdiv = bestdiv > maxdiv ? maxdiv : bestdiv;
>> return bestdiv;
>>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] clk: ti: divider: Add the table parsing to get the best divider value
2016-12-02 9:05 [PATCH] clk: ti: divider: Add the table parsing to get the best divider value Keerthy
2017-01-25 10:37 ` Keerthy
@ 2017-01-27 0:03 ` Stephen Boyd
1 sibling, 0 replies; 4+ messages in thread
From: Stephen Boyd @ 2017-01-27 0:03 UTC (permalink / raw)
To: Keerthy; +Cc: t-kristo, mturquette, linux-omap, linux-clk, linux-kernel
On 12/02, Keerthy wrote:
> Currently the divider selection logic blindly divides the parent_rate
> by the clk rate and gives the divider value for the divider clocks
> which do not have the CLK_SET_RATE_PARENT flag set. Add the clk divider
> table parsing to get the closest divider available in the table
> provided via Device tree.
>
> The code is pretty much taken from: drivers/clk/clk-divider.c.
> and used here to fix up the best divider selection logic.
>
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> Reported-by: Richard Woodruff <r-woodruff2@ti.com>
> ---
Applied to clk-next
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2017-01-27 0:11 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-12-02 9:05 [PATCH] clk: ti: divider: Add the table parsing to get the best divider value Keerthy
2017-01-25 10:37 ` Keerthy
2017-01-25 13:05 ` Tero Kristo
2017-01-27 0:03 ` Stephen Boyd
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).