linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
To: Eric Biggers <ebiggers3@gmail.com>
Cc: Eric Biggers <ebiggers@google.com>,
	Richard Weinberger <richard@nod.at>,
	linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-fscrypt@vger.kernel.org, david@sigma-star.at
Subject: Re: [PATCH] ubifs: Return -ENOKEY from rename if encryption keys are missing
Date: Thu, 27 Apr 2017 10:59:15 +0200	[thread overview]
Message-ID: <99c58fc3-fd4f-e3cf-c05b-e25e6dd0d79e@sigma-star.at> (raw)
In-Reply-To: <20170426225212.GB104929@gmail.com>

Hi Eric,

On 04/27/2017 12:52 AM, Eric Biggers wrote:
> Hi David,
> 
> On Wed, Apr 26, 2017 at 01:48:10PM +0200, David Oberhollenzer wrote:
>> On 04/25/2017 07:54 PM, Eric Biggers wrote:
>>> Did you test that this change actually does anything?  Unlike ext4 and f2fs,
>>> ubifs calls fscrypt_setup_filename() from its rename methods rather than through
>>> a helper function ${FS}_find_entry().  Therefore it's able to pass in lookup=0,
>>> which means that the key is required.  So it should already be failing with
>>> ENOKEY.  You can verify this by running xfstests generic/419.
>>
>> Actually, running xfstests was how this cropped up in the first place.
>>
>> The UBIFS rename and xrename functions allready call
>> fscrypt_setup_filename with lookup=0, however there are other tests
>> before that call and moving them around causes generic/419 to fail
>> at a different place where EPERM was expected.

Sorry, I perhaps replied a little to hastily and mixed up the
test numbers.

I just double checked and read up on the IRC backlog,
it actually _was_ 398 (see below).


> Are you sure?  I just tried rebasing my ubifs support patches for xfstests and
> xfstests-bld onto the latest xfstests and xfstests-bld respectively, then
> building a new kvm-xfstests appliance and the latest kernel from Linus's tree.

I used this kernel tree: git://git.infradead.org/linux-ubifs.git

Plus the following patches: https://lkml.org/lkml/2017/2/9/675

Using xfstests-dev: git://git.kernel.org/pub/scm/fs/xfs/xfstests-dev.git

Inside a Debian VM with scratch and test UBI volumes on nandsim.


> $ kvm-xfstests -c ubifs -g encrypt
>  [15:39:00] - output mismatch (see /results/ubifs/results-default/generic/397.out.bad)
>     --- tests/generic/397.out	2017-04-26 14:37:27.000000000 -0700
>     +++ /results/ubifs/results-default/generic/397.out.bad	2017-04-26 15:39:00.807418574 -0700
>     @@ -10,4 +10,12 @@
>      mkdir: cannot create directory 'SCRATCH_MNT/edir/0123456789abcdef': Required key not available
>      ln: failed to create symbolic link 'SCRATCH_MNT/edir/newlink': Required key not available
>      ln: failed to create symbolic link 'SCRATCH_MNT/edir/0123456789abcdef': Required key not available
>     -stat: cannot stat 'SCRATCH_MNT/edir': No such file or directory
>     +rm: cannot remove '/vdc/edir': Directory not empty
>     +  File: 'SCRATCH_MNT/edir'
>     +  Size: 632       	Blocks: 0          IO Block: 4096   directory
>     ...
>     (Run 'diff -u tests/generic/397.out /results/ubifs/results-default/generic/397.out.bad'  to see the entire diff)
> ...

This is fixed by the first patch in https://lkml.org/lkml/2017/2/9/675


> What's happening with generic/398 is that it's trying cross-rename to exchange
> an unencrypted file with an encrypted one.  The tests expects ENOKEY, but there
> are actually two separate reasons why this operation is expected to fail:
> 
> (1) It's trying to link a file into an encrypted directory with the directory's
>     key being available (ENOKEY)
> (2) It's trying to place an unencrypted file into an encrypted directory, which
>     violates the policy that all files in an encrypted directory have the same
>     encryption policy (EPERM)

Sorry again for the mix up. This is specifically what this patch is
trying to address.


> Personally I think that maybe the generic/398 test should just be updated to
> accept either error code, given that there are two valid reasons for the
> operation to fail.

But if there are different error codes with clearly outlined reasons
for returning each, wouldn't it be preferable to test that instead of
allowing an implementation to return arbitrary error codes?

To my understanding, that is what the test is trying to do there and at
least the ext4 rename and cross rename functions seem to care about
properly distinguishing between those cases.


David

  reply	other threads:[~2017-04-27  8:59 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-24 21:46 [PATCH] ubifs: Return -ENOKEY from rename if encryption keys are missing Richard Weinberger
2017-04-25 17:54 ` Eric Biggers
2017-04-26 11:48   ` David Oberhollenzer
2017-04-26 22:52     ` Eric Biggers
2017-04-27  8:59       ` David Oberhollenzer [this message]
2017-04-27 19:34         ` Eric Biggers

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=99c58fc3-fd4f-e3cf-c05b-e25e6dd0d79e@sigma-star.at \
    --to=david.oberhollenzer@sigma-star.at \
    --cc=david@sigma-star.at \
    --cc=ebiggers3@gmail.com \
    --cc=ebiggers@google.com \
    --cc=linux-fscrypt@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=richard@nod.at \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).