From: Paul Cercueil <paul@crapouillou.net>
To: "H. Nikolaus Schaller" <hns@goldelico.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Kees Cook <keescook@chromium.org>,
"Eric W. Biederman" <ebiederm@xmission.com>,
Miquel Raynal <miquel.raynal@bootlin.com>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Neil Armstrong <narmstrong@baylibre.com>,
Robert Foss <robert.foss@linaro.org>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Harry Wentland <harry.wentland@amd.com>,
Sam Ravnborg <sam@ravnborg.org>,
Maxime Ripard <maxime@cerno.tech>,
Hans Verkuil <hverkuil-cisco@xs4all.nl>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Paul Boddie <paul@boddie.org.uk>,
Andrzej Hajda <andrzej.hajda@intel.com>,
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>,
devicetree@vger.kernel.org, linux-mips@vger.kernel.org,
linux-kernel@vger.kernel.org, letux-kernel@openphoenux.org,
Jonas Karlman <jonas@kwiboo.se>,
dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v13 0/9] MIPS: JZ4780 and CI20 HDMI
Date: Wed, 09 Feb 2022 11:52:21 +0000 [thread overview]
Message-ID: <9ZC17R.T1L0TBAW7MJA3@crapouillou.net> (raw)
In-Reply-To: <cover.1643819482.git.hns@goldelico.com>
Hi Nikolaus,
I tried applying patches 1-2, but they don't apply cleanly on top of
drm-misc/drm-misc-next.
Could you rebase on top of that tree?
Cheers,
-Paul
Le mer., févr. 2 2022 at 17:31:14 +0100, H. Nikolaus Schaller
<hns@goldelico.com> a écrit :
> PATCH V13 2022-02-02 17:31:22:
> * 7/9: remove call to gpiod_set_value() because of GPIOD_OUT_HIGH (by
> paul@crapouillou.net)
> * 4/9: replace ".." by "." (by paul@crapouillou.net)
> * 3/9: remove old hdmi-5v-power in the example (by
> paul@crapouillou.net)
> * 2/9: disable handling of plane f0 only for jz4780 (by
> paul@crapouillou.net)
>
> PATCH V12 2022-01-31 13:26:54:
> This version reworks how hdmi ddc power is controlled by connector
> and not
> by ddc/hdmi bridge driver.
>
> Also some patches of the previous version of this series have been
> removed
> since they are already applied to mips-next/linux/next/v5.17-rc1.
>
> Fixes and changes:
>
> - repair interworking of dw-hdmi with connector-hdmi (by
> hns@goldelico.com)
> - fix JZ_REG_LCD_OSDC setup for jz4780 (by hns@goldelico.com and
> paul@crapouillou.net)
> - adjustments for ci20.dts to use connector gpio for +5v (suggested
> by several)
> - to add control of "ddc-en-gpios" to hdmi-connector driver (by
> hns@goldelico.com)
> - regulator code removed because we now use the "ddc-en-gpios" of the
> connector
> driver (suggested by paul@crapouillou.net)
> - bindings: addition of "ddc-i2c-bus" and "hdmi-5v-supply" removed
> (suggested by robh+dt@kernel.org)
> - rebase on v5.17-rc2
>
> PATCH V11 2021-12-02 19:39:52:
> - patch 4/8: change devm_regulator_get_optional to devm_regulator_get
> and
> remove NULL check (requested by broonie@kernel.org)
> - patch 3/8: make hdmi-5v-supply required (requested by
> broonie@kernel.org)
>
> PATCH V10 2021-11-30 22:26:41:
> - patch 3/8: fix $id and $ref paths (found by robh@kernel.org)
>
> PATCH V9 2021-11-24 22:29:14:
> - patch 6/8: remove optional <0> for assigned-clocks and
> unintentionally included "unwedge" setup (found by
> paul@crapouillou.net)
> - patch 4/8: some cosmetics
> make regulator enable/disable only if not NULL (found by
> paul@crapouillou.net)
> simplify/fix error handling and driver cleanup on remove
> (proposed by paul@crapouillou.net)
> - patch 3/8: fix #include path in example (found by
> paul@crapouillou.net)
> fix missing "i" in unevaluatedProperties (found by
> robh@kernel.org)
> fix 4 spaces indentation for required: property (found
> by robh@kernel.org)
>
> PATCH V8 2021-11-23 19:14:00:
> - fix a bad editing result from patch 2/8 (found by
> paul@crapouillou.net)
>
> PATCH V7 2021-11-23 18:46:23:
> - changed gpio polarity of hdmi_power to 0 (suggested by
> paul@crapouillou.net)
> - fixed LCD1 irq number (bug found by paul@crapouillou.net)
> - removed "- 4" for calculating max_register (suggested by
> paul@crapouillou.net)
> - use unevaluatedPropertes instead of additionalProperties (suggested
> by robh@kernel.org)
> - moved and renamed ingenic,jz4780-hdmi.yaml (suggested by
> robh@kernel.org)
> - adjusted assigned-clocks changes to upstream which added some for
> SSI (by hns@goldelico.com)
> - rebased and tested with v5.16-rc2 + patch set drm/ingenic by
> paul@crapouillou.net (by hns@goldelico.com)
>
> PATCH V6 2021-11-10 20:43:33:
> - changed CONFIG_DRM_INGENIC_DW_HDMI to "m" (by hns@goldelico.com)
> - made ingenic-dw-hdmi an independent platform driver which can be
> compiled as module
> and removed error patch fixes for IPU (suggested by
> paul@crapouillou.net)
> - moved assigned-clocks from jz4780.dtsi to ci20.dts (suggested by
> paul@crapouillou.net)
> - fixed reg property in jz4780.dtsi to cover all registers incl.
> gamma and vee (by hns@goldelico.com)
> - added a base patch to calculate regmap size from DTS reg property
> (requested by paul@crapouillou.net)
> - restored resetting all bits except one in LCDOSDC (requested by
> paul@crapouillou.net)
> - clarified setting of cpos (suggested by paul@crapouillou.net)
> - moved bindings definition for ddc-i2c-bus (suggested by
> paul@crapouillou.net)
> - simplified mask definitions for JZ_LCD_DESSIZE (requested by
> paul@crapouillou.net)
> - removed setting alpha premultiplication (suggested by
> paul@crapouillou.net)
> - removed some comments (suggested by paul@crapouillou.net)
>
> PATCH V5 2021-10-05 14:28:44:
> - dropped mode_fixup and timings support in dw-hdmi as it is no
> longer needed in this V5 (by hns@goldelico.com)
> - dropped "drm/ingenic: add some jz4780 specific features"
> (stimulated by paul@crapouillou.net)
> - fixed typo in commit subject: "synopsis" -> "synopsys" (by
> hns@goldelico.com)
> - swapped clocks in jz4780.dtsi to match synopsys,dw-hdmi.yaml (by
> hns@goldelico.com)
> - improved, simplified, fixed, dtbschecked ingenic-jz4780-hdmi.yaml
> and made dependent of bridge/synopsys,dw-hdmi.yaml (based on
> suggestions by maxime@cerno.tech)
> - fixed binding vs. driver&DTS use of hdmi-5v regulator (suggested by
> maxime@cerno.tech)
> - dropped "drm/bridge: synopsis: Fix to properly handle HPD" - was a
> no longer needed workaround for a previous version
> (suggested by maxime@cerno.tech)
>
> PATCH V4 2021-09-27 18:44:38:
> - fix setting output_port = 1 (issue found by paul@crapouillou.net)
> - ci20.dts: convert to use hdmi-connector (by hns@goldelico.com)
> - add a hdmi-regulator to control +5V power (by hns@goldelico.com)
> - added a fix to dw-hdmi to call drm_kms_helper_hotplug_event on
> plugin event detection (by hns@goldelico.com)
> - always allocate extended descriptor but initialize only for jz4780
> (by hns@goldelico.com)
> - updated to work on top of "[PATCH v3 0/6] drm/ingenic: Various
> improvements v3" (by paul@crapouillou.net)
> - rebased to v5.13-rc3
>
> PATCH V3 2021-08-08 07:10:50:
> This series adds HDMI support for JZ4780 and CI20 board (and fixes
> one IPU related issue in registration error path)
> - [patch 1/8] switched from mode_fixup to atomic_check (suggested by
> robert.foss@linaro.org)
> - the call to the dw-hdmi specialization is still called mode_fixup
> - [patch 3/8] diverse fixes for ingenic-drm-drv (suggested by
> paul@crapouillou.net)
> - factor out some non-HDMI features of the jz4780 into a separate
> patch
> - multiple fixes around max height
> - do not change regmap config but a copy on stack
> - define some constants
> - factor out fixing of drm_init error path for IPU into separate
> patch
> - use FIELD_PREP()
> - [patch 8/8] conversion to component framework dropped (suggested by
> Laurent.pinchart@ideasonboard.com and paul@crapouillou.net)
>
> PATCH V2 2021-08-05 16:08:05:
> - code and commit messages revisited for checkpatch warnings
> - rebased on v5.14-rc4
> - include (failed, hence RFC 8/8) attempt to convert to component
> framework
> (was suggested by Paul Cercueil <paul@crapouillou.net> a while ago)
>
> This series adds HDMI support for JZ4780 and CI20 board
>
>
>
> H. Nikolaus Schaller (5):
> drm/ingenic: prepare ingenic drm for later addition of JZ4780
> drm/synopsys+ingenic: repair hot plug detection
> dw-hdmi/ingenic-dw-hdmi: repair interworking with hdmi-connector
> drm/bridge: display-connector: add ddc-en gpio support
> MIPS: DTS: CI20: fix how ddc power is enabled
>
> Paul Boddie (3):
> drm/ingenic: Add support for JZ4780 and HDMI output
> drm/ingenic: Add dw-hdmi driver specialization for jz4780
> [RFC] drm/ingenic: add some more features specific to jz4780
>
> Sam Ravnborg (1):
> dt-bindings: display: Add ingenic,jz4780-dw-hdmi DT Schema
>
> .../display/bridge/ingenic,jz4780-hdmi.yaml | 82 ++++++++++++++
> arch/mips/boot/dts/ingenic/ci20.dts | 15 +--
> drivers/gpu/drm/bridge/display-connector.c | 15 +++
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 13 ++-
> drivers/gpu/drm/ingenic/Kconfig | 9 ++
> drivers/gpu/drm/ingenic/Makefile | 1 +
> drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 106
> +++++++++++++++++-
> drivers/gpu/drm/ingenic/ingenic-drm.h | 38 +++++++
> drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c | 106
> ++++++++++++++++++
> include/drm/bridge/dw_hdmi.h | 1 +
> 10 files changed, 367 insertions(+), 19 deletions(-)
> create mode 100644
> Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml
> create mode 100644 drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c
>
> --
> 2.33.0
>
next prev parent reply other threads:[~2022-02-09 12:02 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-02 16:31 [PATCH v13 0/9] MIPS: JZ4780 and CI20 HDMI H. Nikolaus Schaller
2022-02-02 16:31 ` [PATCH v13 1/9] drm/ingenic: prepare ingenic drm for later addition of JZ4780 H. Nikolaus Schaller
2022-02-02 16:31 ` [PATCH v13 2/9] drm/ingenic: Add support for JZ4780 and HDMI output H. Nikolaus Schaller
2022-02-02 16:31 ` [PATCH v13 3/9] dt-bindings: display: Add ingenic,jz4780-dw-hdmi DT Schema H. Nikolaus Schaller
2022-02-02 16:31 ` [PATCH v13 4/9] drm/ingenic: Add dw-hdmi driver specialization for jz4780 H. Nikolaus Schaller
2022-02-02 16:31 ` [PATCH v13 5/9] drm/synopsys+ingenic: repair hot plug detection H. Nikolaus Schaller
2022-02-09 12:01 ` Paul Cercueil
2022-02-09 13:51 ` H. Nikolaus Schaller
2022-02-02 16:31 ` [PATCH v13 6/9] dw-hdmi/ingenic-dw-hdmi: repair interworking with hdmi-connector H. Nikolaus Schaller
2022-02-09 12:18 ` Paul Cercueil
2022-02-09 13:51 ` H. Nikolaus Schaller
2022-02-02 16:31 ` [PATCH v13 7/9] drm/bridge: display-connector: add ddc-en gpio support H. Nikolaus Schaller
2022-02-02 16:31 ` [PATCH v13 8/9] MIPS: DTS: CI20: fix how ddc power is enabled H. Nikolaus Schaller
2022-02-09 13:34 ` Thomas Bogendoerfer
2022-02-09 11:52 ` Paul Cercueil [this message]
2022-02-09 13:51 ` [PATCH v13 0/9] MIPS: JZ4780 and CI20 HDMI H. Nikolaus Schaller
2022-02-09 14:02 ` Paul Cercueil
2022-02-12 13:50 ` H. Nikolaus Schaller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9ZC17R.T1L0TBAW7MJA3@crapouillou.net \
--to=paul@crapouillou.net \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=airlied@linux.ie \
--cc=andrzej.hajda@intel.com \
--cc=broonie@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=ebiederm@xmission.com \
--cc=geert+renesas@glider.be \
--cc=harry.wentland@amd.com \
--cc=hns@goldelico.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=keescook@chromium.org \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=letux-kernel@openphoenux.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maxime@cerno.tech \
--cc=miquel.raynal@bootlin.com \
--cc=narmstrong@baylibre.com \
--cc=paul@boddie.org.uk \
--cc=robert.foss@linaro.org \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).