From: Han Xu <han.xu@nxp.com>
To: Stefan Agner <stefan@agner.ch>,
"shawnguo@kernel.org" <shawnguo@kernel.org>,
"kernel@pengutronix.de" <kernel@pengutronix.de>,
"sboyd@codeaurora.org" <sboyd@codeaurora.org>
Cc: "A.S. Dong" <aisheng.dong@nxp.com>,
"dwmw2@infradead.org" <dwmw2@infradead.org>,
"computersforpeace@gmail.com" <computersforpeace@gmail.com>,
"boris.brezillon@free-electrons.com"
<boris.brezillon@free-electrons.com>,
"marek.vasut@gmail.com" <marek.vasut@gmail.com>,
"richard@nod.at" <richard@nod.at>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
"mark.rutland@arm.com" <mark.rutland@arm.com>,
"fabio.estevam@freescale.com" <fabio.estevam@freescale.com>,
"LW@KARO-electronics.de" <LW@KARO-electronics.de>,
"linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-clk@vger.kernel.org" <linux-clk@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v5 2/3] ARM: dts: imx7: add GPMI NAND and APBH DMA
Date: Wed, 7 Jun 2017 15:33:26 +0000 [thread overview]
Message-ID: <9d66efda-d7c1-89a2-e163-c86056e08fb1@nxp.com> (raw)
In-Reply-To: <151ddece1e1427d0b69c4ff11b86a69b6a035d0d.1496730576.git-series.stefan@agner.ch>
On 06/06/2017 01:30 AM, Stefan Agner wrote:
> Add i.MX 7 APBH DMA and GPMI NAND modules.
>
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> ---
> arch/arm/boot/dts/imx7s.dtsi | 32 ++++++++++++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
> index c4f12fd..d71acd8 100644
> --- a/arch/arm/boot/dts/imx7s.dtsi
> +++ b/arch/arm/boot/dts/imx7s.dtsi
> @@ -995,5 +995,37 @@
> status = "disabled";
> };
> };
> +
> + dma_apbh: dma-apbh@33000000 {
> + compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
> + reg = <0x33000000 0x2000>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
> + #dma-cells = <1>;
> + dma-channels = <4>;
> + clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
> + clock-names = "dma_apbh_bch", "dma_apbh_io";
please remove the clock names, I am good with all other changes.
> + };
> +
> + gpmi: gpmi-nand@33002000{
> + compatible = "fsl,imx7d-gpmi-nand";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
> + reg-names = "gpmi-nand", "bch";
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "bch";
> + clocks = <&clks IMX7D_NAND_RAWNAND_CLK>,
> + <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
> + clock-names = "gpmi_io", "gpmi_bch_apb";
> + dmas = <&dma_apbh 0>;
> + dma-names = "rx-tx";
> + status = "disabled";
> + assigned-clocks = <&clks IMX7D_NAND_ROOT_SRC>;
> + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_500M_CLK>;
> + };
> };
> };
next prev parent reply other threads:[~2017-06-07 15:33 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-06 6:30 [PATCH v5 0/3] ARM: dts: imx7: add NAND support Stefan Agner
2017-06-06 6:30 ` [PATCH v5 1/3] clk: imx7d: create clocks behind rawnand clock gate Stefan Agner
2017-06-06 16:33 ` Fabio Estevam
2017-06-06 6:30 ` [PATCH v5 2/3] ARM: dts: imx7: add GPMI NAND and APBH DMA Stefan Agner
2017-06-06 16:34 ` Fabio Estevam
2017-06-07 15:33 ` Han Xu [this message]
2017-06-08 22:23 ` Stefan Agner
2017-06-06 6:30 ` [PATCH v5 3/3] ARM: dts: imx7-colibri: add NAND support Stefan Agner
2017-06-06 16:35 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9d66efda-d7c1-89a2-e163-c86056e08fb1@nxp.com \
--to=han.xu@nxp.com \
--cc=LW@KARO-electronics.de \
--cc=aisheng.dong@nxp.com \
--cc=boris.brezillon@free-electrons.com \
--cc=computersforpeace@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=fabio.estevam@freescale.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=mark.rutland@arm.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=shawnguo@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).