linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michael Walle <michael@walle.cc>
To: Florian Fainelli <f.fainelli@gmail.com>,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	netdev@vger.kernel.org
Subject: Re: [RFC PATCH 2/3] dt-bindings: net: phy: Add support for AT803X
Date: Thu, 31 Oct 2019 00:36:26 +0100	[thread overview]
Message-ID: <A61073BA-743E-499F-A1D0-BFE40F0ED05A@walle.cc> (raw)
In-Reply-To: <408bb56b-efe9-21c4-0177-2d433a7c20ce@gmail.com>

Am 31. Oktober 2019 00:28:47 MEZ schrieb Florian Fainelli <f.fainelli@gmail.com>:
>On 10/30/19 3:42 PM, Michael Walle wrote:
>> Document the Atheros AR803x PHY bindings.
>> 
>> Signed-off-by: Michael Walle <michael@walle.cc>
>> ---
>>  .../bindings/net/atheros,at803x.yaml          | 58
>+++++++++++++++++++
>>  include/dt-bindings/net/atheros-at803x.h      | 13 +++++
>>  2 files changed, 71 insertions(+)
>>  create mode 100644
>Documentation/devicetree/bindings/net/atheros,at803x.yaml
>>  create mode 100644 include/dt-bindings/net/atheros-at803x.h
>> 
>> diff --git
>a/Documentation/devicetree/bindings/net/atheros,at803x.yaml
>b/Documentation/devicetree/bindings/net/atheros,at803x.yaml
>> new file mode 100644
>> index 000000000000..60500fd90fd8
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/atheros,at803x.yaml
>> @@ -0,0 +1,58 @@
>> +# SPDX-License-Identifier: GPL-2.0+
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/net/atheros,at803x.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Atheros AR803x PHY
>> +
>> +maintainers:
>> +  - TBD
>> +
>> +description: |
>> +  Bindings for Atheros AR803x PHYs
>> +
>> +allOf:
>> +  - $ref: ethernet-phy.yaml#
>> +
>> +properties:
>> +  atheros,clk-out-frequency:
>> +    description: Clock output frequency in Hertz.
>> +    enum: [ 25000000, 50000000, 62500000, 125000000 ]
>> +
>> +  atheros,clk-out-strength:
>> +    description: Clock output driver strength.
>> +    enum: [ 0, 1, 2 ]
>> +
>> +  atheros,keep-pll-enabled:
>> +    description: |
>> +      If set, keep the PLL enabled even if there is no link. Useful
>if you
>> +      want to use the clock output without an ethernet link.
>
>This is more of a policy than a hardware description. Implementing this
>has a PHY tunable, possibly as a form of auto-power down
>
>> +    type: boolean
>> +
>> +  atheros,rgmii-io-1v8:
>> +    description: |
>> +      The PHY supports RGMII I/O voltages of 2.5V, 1.8V and 1.5V. By
>default,
>> +      the PHY uses a voltage of 1.5V. If this is set, the voltage
>will changed
>> +      to 1.8V.
>
>will be changed?

oh.. yes of course. 

>This looks like a possibly dangerous configuration as it really can
>lead
>to some good damage happening on the pins if there is an incompatible
>voltage on the MAC and PHY side... of course, you have no way to tell
>ahead of time other than by looking at the board schematics, lovely.

correct.. although the standard mode of 1.5V has a max high voltage of 1.8V so this seems to be safe. But I guess no one has ever really though about how to really configure that safely.

>Does the PHY come up in some sort of super isolatation mode by default
>at least?

not that I'm aware of. also.. the rgmii mode just works without any setup (apart from the delay and voltage settings) 

-michael 


  reply	other threads:[~2019-10-30 23:36 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-30 22:42 [RFC PATCH 0/3] net: phy: at803x device tree binding Michael Walle
2019-10-30 22:42 ` [RFC PATCH 1/3] net: phy: at803x: fix Kconfig description Michael Walle
2019-10-30 23:13   ` Andrew Lunn
2019-10-30 23:16   ` Florian Fainelli
2019-10-30 23:18     ` Andrew Lunn
2019-10-30 23:32       ` Florian Fainelli
2019-10-31  0:05         ` Michael Walle
2019-10-30 22:42 ` [RFC PATCH 2/3] dt-bindings: net: phy: Add support for AT803X Michael Walle
2019-10-30 23:17   ` Andrew Lunn
2019-10-31  0:14     ` Michael Walle
2019-10-31 16:45       ` Florian Fainelli
2019-10-31 17:14         ` Michael Walle
2019-10-30 23:28   ` Florian Fainelli
2019-10-30 23:36     ` Michael Walle [this message]
2019-11-01 15:03   ` Simon Horman
2019-11-02  1:19     ` Michael Walle
2019-10-30 22:42 ` [RFC PATCH 3/3] net: phy: at803x: add device tree binding Michael Walle
2019-10-30 23:21   ` Andrew Lunn
2019-10-30 23:28   ` Florian Fainelli
2019-10-30 23:59     ` Michael Walle
2019-10-31 17:22       ` Michael Walle
2019-10-31 17:35         ` Florian Fainelli
2019-11-02  1:18           ` Michael Walle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=A61073BA-743E-499F-A1D0-BFE40F0ED05A@walle.cc \
    --to=michael@walle.cc \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).