linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Zi Yan <zi.yan@cs.rutgers.edu>
To: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-mm@kvack.org" <linux-mm@kvack.org>,
	"kirill.shutemov@linux.intel.com"
	<kirill.shutemov@linux.intel.com>,
	"akpm@linux-foundation.org" <akpm@linux-foundation.org>,
	"minchan@kernel.org" <minchan@kernel.org>,
	"vbabka@suse.cz" <vbabka@suse.cz>,
	"mgorman@techsingularity.net" <mgorman@techsingularity.net>,
	"khandual@linux.vnet.ibm.com" <khandual@linux.vnet.ibm.com>
Subject: Re: [PATCH v3 04/14] mm: x86: move _PAGE_SWP_SOFT_DIRTY from bit 7 to bit 1
Date: Thu, 9 Feb 2017 09:07:56 -0600	[thread overview]
Message-ID: <A8EB8880-24C8-4134-96B7-BB6D5027AC60@cs.rutgers.edu> (raw)
In-Reply-To: <20170209091458.GA15649@hori1.linux.bs1.fc.nec.co.jp>

[-- Attachment #1: Type: text/plain, Size: 4935 bytes --]

On 9 Feb 2017, at 3:14, Naoya Horiguchi wrote:

> On Sun, Feb 05, 2017 at 11:12:42AM -0500, Zi Yan wrote:
>> From: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
>>
>> pmd_present() checks _PAGE_PSE along with _PAGE_PRESENT to avoid
>> false negative return when it races with thp spilt
>> (during which _PAGE_PRESENT is temporary cleared.) I don't think that
>> dropping _PAGE_PSE check in pmd_present() works well because it can
>> hurt optimization of tlb handling in thp split.
>> In the current kernel, bits 1-4 are not used in non-present format
>> since commit 00839ee3b299 ("x86/mm: Move swap offset/type up in PTE to
>> work around erratum"). So let's move _PAGE_SWP_SOFT_DIRTY to bit 1.
>> Bit 7 is used as reserved (always clear), so please don't use it for
>> other purpose.
>>
>> Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
>>
>> ChangeLog v3:
>> - Move _PAGE_SWP_SOFT_DIRTY to bit 1, it was placed at bit 6. Because
>> some CPUs might accidentally set bit 5 or 6.
>>
>> Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu>
>> ---
>
> More documenting will be helpful, could you do like follows?

Sure. Thanks for helping.

>
> Thanks,
> Naoya Horiguchi
> ---
> From: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
> Date: Sun, 5 Feb 2017 11:12:42 -0500
> Subject: [PATCH] mm: x86: move _PAGE_SWP_SOFT_DIRTY from bit 7 to bit 1
>
> pmd_present() checks _PAGE_PSE along with _PAGE_PRESENT to avoid
> false negative return when it races with thp spilt
> (during which _PAGE_PRESENT is temporary cleared.) I don't think that
> dropping _PAGE_PSE check in pmd_present() works well because it can
> hurt optimization of tlb handling in thp split.
> In the current kernel, bits 1-4 are not used in non-present format
> since commit 00839ee3b299 ("x86/mm: Move swap offset/type up in PTE to
> work around erratum"). So let's move _PAGE_SWP_SOFT_DIRTY to bit 1.
> Bit 7 is used as reserved (always clear), so please don't use it for
> other purpose.
>
> Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
> Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu>
> ---
>  arch/x86/include/asm/pgtable_64.h    | 12 +++++++++---
>  arch/x86/include/asm/pgtable_types.h | 10 +++++-----
>  2 files changed, 14 insertions(+), 8 deletions(-)
>
> diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
> index 73c7ccc38912..07c98c85cc96 100644
> --- a/arch/x86/include/asm/pgtable_64.h
> +++ b/arch/x86/include/asm/pgtable_64.h
> @@ -157,15 +157,21 @@ static inline int pgd_large(pgd_t pgd) { return 0; }
>  /*
>   * Encode and de-code a swap entry
>   *
> - * |     ...            | 11| 10|  9|8|7|6|5| 4| 3|2|1|0| <- bit number
> - * |     ...            |SW3|SW2|SW1|G|L|D|A|CD|WT|U|W|P| <- bit names
> - * | OFFSET (14->63) | TYPE (9-13)  |0|X|X|X| X| X|X|X|0| <- swp entry
> + * |     ...            | 11| 10|  9|8|7|6|5| 4| 3|2| 1|0| <- bit number
> + * |     ...            |SW3|SW2|SW1|G|L|D|A|CD|WT|U| W|P| <- bit names
> + * | OFFSET (14->63) | TYPE (9-13)  |0|0|X|X| X| X|X|SD|0| <- swp entry
>   *
>   * G (8) is aliased and used as a PROT_NONE indicator for
>   * !present ptes.  We need to start storing swap entries above
>   * there.  We also need to avoid using A and D because of an
>   * erratum where they can be incorrectly set by hardware on
>   * non-present PTEs.
> + *
> + * SD (1) in swp entry is used to store soft dirty bit, which helps us
> + * remember soft dirty over page migration.
> + *
> + * Bit 7 in swp entry should be 0 because pmd_present checks not only P,
> + * but G.
>   */
>  #define SWP_TYPE_FIRST_BIT (_PAGE_BIT_PROTNONE + 1)
>  #define SWP_TYPE_BITS 5
> diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
> index 8b4de22d6429..3695abd58ef6 100644
> --- a/arch/x86/include/asm/pgtable_types.h
> +++ b/arch/x86/include/asm/pgtable_types.h
> @@ -97,15 +97,15 @@
>  /*
>   * Tracking soft dirty bit when a page goes to a swap is tricky.
>   * We need a bit which can be stored in pte _and_ not conflict
> - * with swap entry format. On x86 bits 6 and 7 are *not* involved
> - * into swap entry computation, but bit 6 is used for nonlinear
> - * file mapping, so we borrow bit 7 for soft dirty tracking.
> + * with swap entry format. On x86 bits 1-4 are *not* involved
> + * into swap entry computation, but bit 7 is used for thp migration,
> + * so we borrow bit 1 for soft dirty tracking.
>   *
>   * Please note that this bit must be treated as swap dirty page
> - * mark if and only if the PTE has present bit clear!
> + * mark if and only if the PTE/PMD has present bit clear!
>   */
>  #ifdef CONFIG_MEM_SOFT_DIRTY
> -#define _PAGE_SWP_SOFT_DIRTY	_PAGE_PSE
> +#define _PAGE_SWP_SOFT_DIRTY	_PAGE_RW
>  #else
>  #define _PAGE_SWP_SOFT_DIRTY	(_AT(pteval_t, 0))
>  #endif
> -- 
> 2.7.4


--
Best Regards
Yan Zi

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 496 bytes --]

  reply	other threads:[~2017-02-09 15:24 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-05 16:12 [PATCH v3 00/14] mm: page migration enhancement for thp Zi Yan
2017-02-05 16:12 ` [PATCH v3 01/14] mm: thp: make __split_huge_pmd_locked visible Zi Yan
2017-02-06  6:12   ` Naoya Horiguchi
2017-02-06 12:10     ` Zi Yan
2017-02-06 15:02   ` Matthew Wilcox
2017-02-06 15:03     ` Zi Yan
2017-02-05 16:12 ` [PATCH v3 02/14] mm: thp: create new __zap_huge_pmd_locked function Zi Yan
2017-02-05 16:12 ` [PATCH v3 03/14] mm: use pmd lock instead of racy checks in zap_pmd_range() Zi Yan
2017-02-06  4:02   ` Hillf Danton
2017-02-06  4:14     ` Zi Yan
2017-02-06  7:43   ` Naoya Horiguchi
2017-02-06 13:02     ` Zi Yan
2017-02-06 23:22       ` Naoya Horiguchi
2017-02-06 16:07   ` Kirill A. Shutemov
2017-02-06 16:32     ` Zi Yan
2017-02-06 17:35       ` Kirill A. Shutemov
2017-02-07 13:55     ` Aneesh Kumar K.V
2017-02-07 14:19   ` Kirill A. Shutemov
2017-02-07 15:11     ` Zi Yan
2017-02-07 16:37       ` Kirill A. Shutemov
2017-02-07 17:14         ` Zi Yan
2017-02-07 17:45           ` Kirill A. Shutemov
2017-02-13  0:25             ` Zi Yan
2017-02-13 10:59               ` Kirill A. Shutemov
2017-02-13 14:40                 ` Andrea Arcangeli
2017-02-05 16:12 ` [PATCH v3 04/14] mm: x86: move _PAGE_SWP_SOFT_DIRTY from bit 7 to bit 1 Zi Yan
2017-02-09  9:14   ` Naoya Horiguchi
2017-02-09 15:07     ` Zi Yan [this message]
2017-02-05 16:12 ` [PATCH v3 05/14] mm: mempolicy: add queue_pages_node_check() Zi Yan
2017-02-05 16:12 ` [PATCH v3 06/14] mm: thp: introduce separate TTU flag for thp freezing Zi Yan
2017-02-05 16:12 ` [PATCH v3 07/14] mm: thp: introduce CONFIG_ARCH_ENABLE_THP_MIGRATION Zi Yan
2017-02-05 16:12 ` [PATCH v3 08/14] mm: thp: enable thp migration in generic path Zi Yan
2017-02-09  9:15   ` Naoya Horiguchi
2017-02-09 15:17     ` Zi Yan
2017-02-09 23:04       ` Naoya Horiguchi
2017-02-14 20:13   ` Zi Yan
2017-02-05 16:12 ` [PATCH v3 09/14] mm: thp: check pmd migration entry in common path Zi Yan
2017-02-09  9:16   ` Naoya Horiguchi
2017-02-09 17:36     ` Zi Yan
2017-02-05 16:12 ` [PATCH v3 10/14] mm: soft-dirty: keep soft-dirty bits over thp migration Zi Yan
2017-02-05 16:12 ` [PATCH v3 11/14] mm: hwpoison: soft offline supports " Zi Yan
2017-02-05 16:12 ` [PATCH v3 12/14] mm: mempolicy: mbind and migrate_pages support " Zi Yan
2017-02-05 16:12 ` [PATCH v3 13/14] mm: migrate: move_pages() supports " Zi Yan
2017-02-09  9:16   ` Naoya Horiguchi
2017-02-09 17:37     ` Zi Yan
2017-02-05 16:12 ` [PATCH v3 14/14] mm: memory_hotplug: memory hotremove " Zi Yan
2017-02-23 16:12 ` [PATCH v3 00/14] mm: page migration enhancement for thp Zi Yan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=A8EB8880-24C8-4134-96B7-BB6D5027AC60@cs.rutgers.edu \
    --to=zi.yan@cs.rutgers.edu \
    --cc=akpm@linux-foundation.org \
    --cc=khandual@linux.vnet.ibm.com \
    --cc=kirill.shutemov@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mgorman@techsingularity.net \
    --cc=minchan@kernel.org \
    --cc=n-horiguchi@ah.jp.nec.com \
    --cc=vbabka@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).