linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Anson Huang <anson.huang@nxp.com>
To: Fabio Estevam <festevam@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <kernel@pengutronix.de>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Haibo Chen <haibo.chen@freescale.com>,
	Andy Duan <fugang.duan@nxp.com>,
	"A.s. Dong" <aisheng.dong@nxp.com>,
	Robin Gong <yibin.gong@nxp.com>, dl-linux-imx <linux-imx@nxp.com>,
	"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
	<linux-arm-kernel@lists.infradead.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	linux-kernel <linux-kernel@vger.kernel.org>
Subject: RE: [PATCH V6 7/7] ARM: dts: imx6sx-sabreauto: add egalax touch screen support
Date: Sun, 6 May 2018 06:04:11 +0000	[thread overview]
Message-ID: <AM3PR04MB1315A1673823C8B2BAA3169AF5840@AM3PR04MB1315.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <CAOMZO5D1H4+w=FGh+8icBziunDzM4jN7peA=mirGb9RBHHqMsg@mail.gmail.com>

Hi, Fabio

Anson Huang
Best Regards!


> -----Original Message-----
> From: Fabio Estevam [mailto:festevam@gmail.com]
> Sent: Saturday, May 5, 2018 7:56 PM
> To: Anson Huang <anson.huang@nxp.com>
> Cc: Shawn Guo <shawnguo@kernel.org>; Sascha Hauer
> <kernel@pengutronix.de>; Fabio Estevam <fabio.estevam@nxp.com>; Rob
> Herring <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>;
> Haibo Chen <haibo.chen@freescale.com>; Andy Duan
> <fugang.duan@nxp.com>; A.s. Dong <aisheng.dong@nxp.com>; Robin Gong
> <yibin.gong@nxp.com>; dl-linux-imx <linux-imx@nxp.com>; moderated
> list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
> <linux-arm-kernel@lists.infradead.org>; open list:OPEN FIRMWARE AND
> FLATTENED DEVICE TREE BINDINGS <devicetree@vger.kernel.org>; linux-kernel
> <linux-kernel@vger.kernel.org>
> Subject: Re: [PATCH V6 7/7] ARM: dts: imx6sx-sabreauto: add egalax touch
> screen support
> 
> Hi Anson,
> 
> On Sat, May 5, 2018 at 5:29 AM, Anson Huang <Anson.Huang@nxp.com>
> wrote:
> > Add egalax touch screen support on i2c2 bus.
> >
> > Signed-off-by: Haibo Chen <haibo.chen@freescale.com>
> 
> Is Haibo the author of this patch? If so, his name should appear in the From field.

I made this patch based on NXP kernel tree, Haibo is the original author of this
feature, but the original patch can NOT be applied directly, I have to refine the patch
to meet the upstream requirement, so I added him as another signed-off tag,
to avoid confuse, I can remove this sign-off in next patch version. Same story
for other patches in this series.

> 
> > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> > ---
> > changes since V5:
> >         improve pinctrl node name and touchscreen node name.
> >  arch/arm/boot/dts/imx6sx-sabreauto.dts | 16 ++++++++++++++++
> >  1 file changed, 16 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts
> > b/arch/arm/boot/dts/imx6sx-sabreauto.dts
> > index 1dc5b58..3fe41d3 100644
> > --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
> > +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
> > @@ -122,6 +122,12 @@
> >  };
> >
> >  &iomuxc {
> > +       pinctrl_egalax_int: egalax-intgrp {
> > +               fsl,pins = <
> > +                       MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22
> 0x80000000
> > +               >;
> > +       };
> > +
> >         pinctrl_enet1: enet1grp {
> >                 fsl,pins = <
> >                         MX6SX_PAD_ENET1_MDIO__ENET1_MDIO
> 0xa0b1
> > @@ -264,6 +270,16 @@
> >         pinctrl-0 = <&pinctrl_i2c2>;
> >         status = "okay";
> >
> > +       egalax_touchscreen@4 {
> 
> Should be touchscreen@4.
 
Will improve it in next patch version.

Anson.

  reply	other threads:[~2018-05-06  6:04 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-05  8:29 [PATCH V6 1/7] ARM: dts: imx6sx-sabreauto: add PMIC support Anson Huang
2018-05-05  8:29 ` [PATCH V6 2/7] ARM: dts: imx6sx-sabreauto: add max7322 IO expander support Anson Huang
2018-05-05  8:29 ` [PATCH V6 3/7] ARM: dts: imx6sx-sabreauto: add IO expander max7310 support Anson Huang
2018-05-05  8:29 ` [PATCH V6 4/7] ARM: dts: imx6sx-sabreauto: add fec support Anson Huang
2018-05-05 12:10   ` Fabio Estevam
2018-05-06  6:08     ` Anson Huang
2018-05-05  8:29 ` [PATCH V6 5/7] ARM: dts: imx6sx-sabreauto: add wdog external reset Anson Huang
2018-05-05  8:29 ` [PATCH V6 6/7] ARM: dts: imx6sx-sabreauto: add debug LED support Anson Huang
2018-05-05  8:29 ` [PATCH V6 7/7] ARM: dts: imx6sx-sabreauto: add egalax touch screen support Anson Huang
2018-05-05 11:56   ` Fabio Estevam
2018-05-06  6:04     ` Anson Huang [this message]
2018-05-05 15:17   ` Fabio Estevam
2018-05-06  6:10     ` Anson Huang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AM3PR04MB1315A1673823C8B2BAA3169AF5840@AM3PR04MB1315.eurprd04.prod.outlook.com \
    --to=anson.huang@nxp.com \
    --cc=aisheng.dong@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=festevam@gmail.com \
    --cc=fugang.duan@nxp.com \
    --cc=haibo.chen@freescale.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=yibin.gong@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).