linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] arm64: dts: ls1028a: Add FlexSPI support for NXP LS1028
@ 2019-09-10 12:20 Ashish Kumar
  2019-09-10 12:20 ` [PATCH] arm64: dts: ls1046a: Add QSPI node for ls1046afrwy Ashish Kumar
                   ` (4 more replies)
  0 siblings, 5 replies; 7+ messages in thread
From: Ashish Kumar @ 2019-09-10 12:20 UTC (permalink / raw)
  To: devicetree, robh, mark.rutland, shawnguo
  Cc: linux-arm-kernel, linux-kernel, Ashish Kumar, Xiaowei Bao

Add fspi node property for LS1028A SoC for FlexSPI driver.
Property added for FlexSPI controller and for the connected
slave device for the LS1028ARDB and LS1028AQDS target.
RDB and QDS is having one SPI-NOR flash device, mt35xu02g
connected at CS0.
This flash device "mt35xu02g" is tested for octal read

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 15 +++++++++++++++
 arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 15 +++++++++++++++
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi    | 13 +++++++++++++
 3 files changed, 43 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 5e14e5a..5d46993 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -103,6 +103,21 @@
 	status = "okay";
 };
 
+&fspi {
+	status = "okay";
+	flash0: mt35xu02g@0 {
+		compatible = "micron,mt35xu02g", "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
+		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 1a69221..f33cb2e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -96,6 +96,21 @@
 	status = "okay";
 };
 
+&fspi {
+	status = "okay";
+	flash0: mt35xu02g@0 {
+		compatible = "micron,mt35xu02g", "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
+		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index b139b29..4aa1825 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -174,6 +174,19 @@
 			clocks = <&sysclk>;
 		};
 
+		fspi: spi@20c0000 {
+			compatible = "nxp,lx2160a-fspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x20c0000 0x0 0x10000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
+			reg-names = "fspi_base", "fspi_mmap";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "fspi_en", "fspi";
+			status = "disabled";
+		};
+
 		i2c0: i2c@2000000 {
 			compatible = "fsl,vf610-i2c";
 			#address-cells = <1>;
-- 
2.7.4


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2019-10-08  8:03 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-10 12:20 [PATCH] arm64: dts: ls1028a: Add FlexSPI support for NXP LS1028 Ashish Kumar
2019-09-10 12:20 ` [PATCH] arm64: dts: ls1046a: Add QSPI node for ls1046afrwy Ashish Kumar
2019-09-10 12:20 ` [PATCH] arm64: dts: ls1046a: Append missing properties of QSPI node on ls1046ardb Ashish Kumar
2019-09-10 12:20 ` [PATCH] arm64: dts: ls1088a: Add QSPI support for NXP LS1088 Ashish Kumar
2019-09-10 12:20 ` [PATCH] arm64: dts: ls208x: Remove non-compatible driver device from qspi node Ashish Kumar
2019-10-06  3:20 ` [PATCH] arm64: dts: ls1028a: Add FlexSPI support for NXP LS1028 Shawn Guo
2019-10-08  8:03   ` Xiaowei Bao

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).