* [PATCH V2] dt-bindings: firmware: imx: Move system control into dt-binding headfile
@ 2020-04-23 15:35 Anson Huang
2020-04-23 15:56 ` Aisheng Dong
0 siblings, 1 reply; 4+ messages in thread
From: Anson Huang @ 2020-04-23 15:35 UTC (permalink / raw)
To: shawnguo, s.hauer, kernel, festevam, rui.zhang, daniel.lezcano,
amit.kucheria, robh+dt, leonard.crestez, linux, peng.fan,
linux-kernel, linux-arm-kernel, linux-pm
Cc: Linux-imx
i.MX8 SoCs DTS file needs system control macro definitions, so move them
into dt-binding headfile, then include/linux/firmware/imx/types.h can be
removed and those drivers using it should be changed accordingly.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
Changes since V1:
- squash all patches in previous series to one to avoid build break
with bisect.
---
drivers/firmware/imx/imx-scu.c | 1 -
drivers/thermal/imx_sc_thermal.c | 2 +-
include/dt-bindings/firmware/imx/rsrc.h | 84 +++++++++++++++++++++++++++++++++
include/linux/firmware/imx/sci.h | 1 -
include/linux/firmware/imx/types.h | 65 -------------------------
5 files changed, 85 insertions(+), 68 deletions(-)
delete mode 100644 include/linux/firmware/imx/types.h
diff --git a/drivers/firmware/imx/imx-scu.c b/drivers/firmware/imx/imx-scu.c
index f71eaa5..f3340fa 100644
--- a/drivers/firmware/imx/imx-scu.c
+++ b/drivers/firmware/imx/imx-scu.c
@@ -8,7 +8,6 @@
*/
#include <linux/err.h>
-#include <linux/firmware/imx/types.h>
#include <linux/firmware/imx/ipc.h>
#include <linux/firmware/imx/sci.h>
#include <linux/interrupt.h>
diff --git a/drivers/thermal/imx_sc_thermal.c b/drivers/thermal/imx_sc_thermal.c
index b2b68c9..b01d28e 100644
--- a/drivers/thermal/imx_sc_thermal.c
+++ b/drivers/thermal/imx_sc_thermal.c
@@ -3,9 +3,9 @@
* Copyright 2018-2020 NXP.
*/
+#include <dt-bindings/firmware/imx/rsrc.h>
#include <linux/err.h>
#include <linux/firmware/imx/sci.h>
-#include <linux/firmware/imx/types.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
diff --git a/include/dt-bindings/firmware/imx/rsrc.h b/include/dt-bindings/firmware/imx/rsrc.h
index 4e61f64..51906b9 100644
--- a/include/dt-bindings/firmware/imx/rsrc.h
+++ b/include/dt-bindings/firmware/imx/rsrc.h
@@ -547,4 +547,88 @@
#define IMX_SC_R_ATTESTATION 545
#define IMX_SC_R_LAST 546
+/*
+ * Defines for SC PM CLK
+ */
+#define IMX_SC_PM_CLK_SLV_BUS 0 /* Slave bus clock */
+#define IMX_SC_PM_CLK_MST_BUS 1 /* Master bus clock */
+#define IMX_SC_PM_CLK_PER 2 /* Peripheral clock */
+#define IMX_SC_PM_CLK_PHY 3 /* Phy clock */
+#define IMX_SC_PM_CLK_MISC 4 /* Misc clock */
+#define IMX_SC_PM_CLK_MISC0 0 /* Misc 0 clock */
+#define IMX_SC_PM_CLK_MISC1 1 /* Misc 1 clock */
+#define IMX_SC_PM_CLK_MISC2 2 /* Misc 2 clock */
+#define IMX_SC_PM_CLK_MISC3 3 /* Misc 3 clock */
+#define IMX_SC_PM_CLK_MISC4 4 /* Misc 4 clock */
+#define IMX_SC_PM_CLK_CPU 2 /* CPU clock */
+#define IMX_SC_PM_CLK_PLL 4 /* PLL */
+#define IMX_SC_PM_CLK_BYPASS 4 /* Bypass clock */
+
+/*
+ * Defines for SC CONTROL
+ */
+#define IMX_SC_C_TEMP 0U
+#define IMX_SC_C_TEMP_HI 1U
+#define IMX_SC_C_TEMP_LOW 2U
+#define IMX_SC_C_PXL_LINK_MST1_ADDR 3U
+#define IMX_SC_C_PXL_LINK_MST2_ADDR 4U
+#define IMX_SC_C_PXL_LINK_MST_ENB 5U
+#define IMX_SC_C_PXL_LINK_MST1_ENB 6U
+#define IMX_SC_C_PXL_LINK_MST2_ENB 7U
+#define IMX_SC_C_PXL_LINK_SLV1_ADDR 8U
+#define IMX_SC_C_PXL_LINK_SLV2_ADDR 9U
+#define IMX_SC_C_PXL_LINK_MST_VLD 10U
+#define IMX_SC_C_PXL_LINK_MST1_VLD 11U
+#define IMX_SC_C_PXL_LINK_MST2_VLD 12U
+#define IMX_SC_C_SINGLE_MODE 13U
+#define IMX_SC_C_ID 14U
+#define IMX_SC_C_PXL_CLK_POLARITY 15U
+#define IMX_SC_C_LINESTATE 16U
+#define IMX_SC_C_PCIE_G_RST 17U
+#define IMX_SC_C_PCIE_BUTTON_RST 18U
+#define IMX_SC_C_PCIE_PERST 19U
+#define IMX_SC_C_PHY_RESET 20U
+#define IMX_SC_C_PXL_LINK_RATE_CORRECTION 21U
+#define IMX_SC_C_PANIC 22U
+#define IMX_SC_C_PRIORITY_GROUP 23U
+#define IMX_SC_C_TXCLK 24U
+#define IMX_SC_C_CLKDIV 25U
+#define IMX_SC_C_DISABLE_50 26U
+#define IMX_SC_C_DISABLE_125 27U
+#define IMX_SC_C_SEL_125 28U
+#define IMX_SC_C_MODE 29U
+#define IMX_SC_C_SYNC_CTRL0 30U
+#define IMX_SC_C_KACHUNK_CNT 31U
+#define IMX_SC_C_KACHUNK_SEL 32U
+#define IMX_SC_C_SYNC_CTRL1 33U
+#define IMX_SC_C_DPI_RESET 34U
+#define IMX_SC_C_MIPI_RESET 35U
+#define IMX_SC_C_DUAL_MODE 36U
+#define IMX_SC_C_VOLTAGE 37U
+#define IMX_SC_C_PXL_LINK_SEL 38U
+#define IMX_SC_C_OFS_SEL 39U
+#define IMX_SC_C_OFS_AUDIO 40U
+#define IMX_SC_C_OFS_PERIPH 41U
+#define IMX_SC_C_OFS_IRQ 42U
+#define IMX_SC_C_RST0 43U
+#define IMX_SC_C_RST1 44U
+#define IMX_SC_C_SEL0 45U
+#define IMX_SC_C_CALIB0 46U
+#define IMX_SC_C_CALIB1 47U
+#define IMX_SC_C_CALIB2 48U
+#define IMX_SC_C_IPG_DEBUG 49U
+#define IMX_SC_C_IPG_DOZE 50U
+#define IMX_SC_C_IPG_WAIT 51U
+#define IMX_SC_C_IPG_STOP 52U
+#define IMX_SC_C_IPG_STOP_MODE 53U
+#define IMX_SC_C_IPG_STOP_ACK 54U
+#define IMX_SC_C_SYNC_CTRL 55U
+#define IMX_SC_C_OFS_AUDIO_ALT 56U
+#define IMX_SC_C_DSP_BYP 57U
+#define IMX_SC_C_CLK_GEN_EN 58U
+#define IMX_SC_C_INTF_SEL 59U
+#define IMX_SC_C_RXC_DLY 60U
+#define IMX_SC_C_TIMER_SEL 61U
+#define IMX_SC_C_LAST 62U
+
#endif /* __DT_BINDINGS_RSCRC_IMX_H */
diff --git a/include/linux/firmware/imx/sci.h b/include/linux/firmware/imx/sci.h
index 17ba4e4..3fa418a 100644
--- a/include/linux/firmware/imx/sci.h
+++ b/include/linux/firmware/imx/sci.h
@@ -11,7 +11,6 @@
#define _SC_SCI_H
#include <linux/firmware/imx/ipc.h>
-#include <linux/firmware/imx/types.h>
#include <linux/firmware/imx/svc/misc.h>
#include <linux/firmware/imx/svc/pm.h>
diff --git a/include/linux/firmware/imx/types.h b/include/linux/firmware/imx/types.h
deleted file mode 100644
index 8082110..0000000
--- a/include/linux/firmware/imx/types.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2016 Freescale Semiconductor, Inc.
- * Copyright 2017~2018 NXP
- *
- * Header file containing types used across multiple service APIs.
- */
-
-#ifndef _SC_TYPES_H
-#define _SC_TYPES_H
-
-/*
- * This type is used to indicate a control.
- */
-enum imx_sc_ctrl {
- IMX_SC_C_TEMP = 0,
- IMX_SC_C_TEMP_HI = 1,
- IMX_SC_C_TEMP_LOW = 2,
- IMX_SC_C_PXL_LINK_MST1_ADDR = 3,
- IMX_SC_C_PXL_LINK_MST2_ADDR = 4,
- IMX_SC_C_PXL_LINK_MST_ENB = 5,
- IMX_SC_C_PXL_LINK_MST1_ENB = 6,
- IMX_SC_C_PXL_LINK_MST2_ENB = 7,
- IMX_SC_C_PXL_LINK_SLV1_ADDR = 8,
- IMX_SC_C_PXL_LINK_SLV2_ADDR = 9,
- IMX_SC_C_PXL_LINK_MST_VLD = 10,
- IMX_SC_C_PXL_LINK_MST1_VLD = 11,
- IMX_SC_C_PXL_LINK_MST2_VLD = 12,
- IMX_SC_C_SINGLE_MODE = 13,
- IMX_SC_C_ID = 14,
- IMX_SC_C_PXL_CLK_POLARITY = 15,
- IMX_SC_C_LINESTATE = 16,
- IMX_SC_C_PCIE_G_RST = 17,
- IMX_SC_C_PCIE_BUTTON_RST = 18,
- IMX_SC_C_PCIE_PERST = 19,
- IMX_SC_C_PHY_RESET = 20,
- IMX_SC_C_PXL_LINK_RATE_CORRECTION = 21,
- IMX_SC_C_PANIC = 22,
- IMX_SC_C_PRIORITY_GROUP = 23,
- IMX_SC_C_TXCLK = 24,
- IMX_SC_C_CLKDIV = 25,
- IMX_SC_C_DISABLE_50 = 26,
- IMX_SC_C_DISABLE_125 = 27,
- IMX_SC_C_SEL_125 = 28,
- IMX_SC_C_MODE = 29,
- IMX_SC_C_SYNC_CTRL0 = 30,
- IMX_SC_C_KACHUNK_CNT = 31,
- IMX_SC_C_KACHUNK_SEL = 32,
- IMX_SC_C_SYNC_CTRL1 = 33,
- IMX_SC_C_DPI_RESET = 34,
- IMX_SC_C_MIPI_RESET = 35,
- IMX_SC_C_DUAL_MODE = 36,
- IMX_SC_C_VOLTAGE = 37,
- IMX_SC_C_PXL_LINK_SEL = 38,
- IMX_SC_C_OFS_SEL = 39,
- IMX_SC_C_OFS_AUDIO = 40,
- IMX_SC_C_OFS_PERIPH = 41,
- IMX_SC_C_OFS_IRQ = 42,
- IMX_SC_C_RST0 = 43,
- IMX_SC_C_RST1 = 44,
- IMX_SC_C_SEL0 = 45,
- IMX_SC_C_LAST
-};
-
-#endif /* _SC_TYPES_H */
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* RE: [PATCH V2] dt-bindings: firmware: imx: Move system control into dt-binding headfile
2020-04-23 15:35 [PATCH V2] dt-bindings: firmware: imx: Move system control into dt-binding headfile Anson Huang
@ 2020-04-23 15:56 ` Aisheng Dong
2020-04-23 22:28 ` Anson Huang
0 siblings, 1 reply; 4+ messages in thread
From: Aisheng Dong @ 2020-04-23 15:56 UTC (permalink / raw)
To: Anson Huang, shawnguo, s.hauer, kernel, festevam, rui.zhang,
daniel.lezcano, amit.kucheria, robh+dt, Leonard Crestez, linux,
Peng Fan, linux-kernel, linux-arm-kernel, linux-pm
Cc: dl-linux-imx
> From: Anson Huang <Anson.Huang@nxp.com>
> Sent: Thursday, April 23, 2020 11:36 PM
>
> i.MX8 SoCs DTS file needs system control macro definitions, so move them into
> dt-binding headfile, then include/linux/firmware/imx/types.h can be removed
> and those drivers using it should be changed accordingly.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
You seems ignored my comments in V1.
Usually we'd better to keep original author when sending patches if no fundamental changes.
> ---
> Changes since V1:
> - squash all patches in previous series to one to avoid build break
> with bisect.
> ---
> drivers/firmware/imx/imx-scu.c | 1 -
> drivers/thermal/imx_sc_thermal.c | 2 +-
> include/dt-bindings/firmware/imx/rsrc.h | 84
> +++++++++++++++++++++++++++++++++
> include/linux/firmware/imx/sci.h | 1 -
> include/linux/firmware/imx/types.h | 65 -------------------------
> 5 files changed, 85 insertions(+), 68 deletions(-) delete mode 100644
> include/linux/firmware/imx/types.h
>
> diff --git a/drivers/firmware/imx/imx-scu.c b/drivers/firmware/imx/imx-scu.c
> index f71eaa5..f3340fa 100644
> --- a/drivers/firmware/imx/imx-scu.c
> +++ b/drivers/firmware/imx/imx-scu.c
> @@ -8,7 +8,6 @@
> */
>
> #include <linux/err.h>
> -#include <linux/firmware/imx/types.h>
> #include <linux/firmware/imx/ipc.h>
> #include <linux/firmware/imx/sci.h>
> #include <linux/interrupt.h>
> diff --git a/drivers/thermal/imx_sc_thermal.c
> b/drivers/thermal/imx_sc_thermal.c
> index b2b68c9..b01d28e 100644
> --- a/drivers/thermal/imx_sc_thermal.c
> +++ b/drivers/thermal/imx_sc_thermal.c
> @@ -3,9 +3,9 @@
> * Copyright 2018-2020 NXP.
> */
>
> +#include <dt-bindings/firmware/imx/rsrc.h>
> #include <linux/err.h>
> #include <linux/firmware/imx/sci.h>
> -#include <linux/firmware/imx/types.h>
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_device.h>
> diff --git a/include/dt-bindings/firmware/imx/rsrc.h
> b/include/dt-bindings/firmware/imx/rsrc.h
> index 4e61f64..51906b9 100644
> --- a/include/dt-bindings/firmware/imx/rsrc.h
> +++ b/include/dt-bindings/firmware/imx/rsrc.h
> @@ -547,4 +547,88 @@
> #define IMX_SC_R_ATTESTATION 545
> #define IMX_SC_R_LAST 546
>
> +/*
> + * Defines for SC PM CLK
> + */
> +#define IMX_SC_PM_CLK_SLV_BUS 0 /* Slave bus clock */
> +#define IMX_SC_PM_CLK_MST_BUS 1 /* Master bus clock */
> +#define IMX_SC_PM_CLK_PER 2 /* Peripheral clock */
> +#define IMX_SC_PM_CLK_PHY 3 /* Phy clock */
> +#define IMX_SC_PM_CLK_MISC 4 /* Misc clock */
> +#define IMX_SC_PM_CLK_MISC0 0 /* Misc 0 clock */
> +#define IMX_SC_PM_CLK_MISC1 1 /* Misc 1 clock */
> +#define IMX_SC_PM_CLK_MISC2 2 /* Misc 2 clock */
> +#define IMX_SC_PM_CLK_MISC3 3 /* Misc 3 clock */
> +#define IMX_SC_PM_CLK_MISC4 4 /* Misc 4 clock */
> +#define IMX_SC_PM_CLK_CPU 2 /* CPU clock */
> +#define IMX_SC_PM_CLK_PLL 4 /* PLL */
> +#define IMX_SC_PM_CLK_BYPASS 4 /* Bypass clock */
> +
This is newly added stuff and should be a separate patches.
Regards
Aisheng
> +/*
> + * Defines for SC CONTROL
> + */
> +#define IMX_SC_C_TEMP 0U
> +#define IMX_SC_C_TEMP_HI 1U
> +#define IMX_SC_C_TEMP_LOW 2U
> +#define IMX_SC_C_PXL_LINK_MST1_ADDR 3U
> +#define IMX_SC_C_PXL_LINK_MST2_ADDR 4U
> +#define IMX_SC_C_PXL_LINK_MST_ENB 5U
> +#define IMX_SC_C_PXL_LINK_MST1_ENB 6U
> +#define IMX_SC_C_PXL_LINK_MST2_ENB 7U
> +#define IMX_SC_C_PXL_LINK_SLV1_ADDR 8U
> +#define IMX_SC_C_PXL_LINK_SLV2_ADDR 9U
> +#define IMX_SC_C_PXL_LINK_MST_VLD 10U
> +#define IMX_SC_C_PXL_LINK_MST1_VLD 11U
> +#define IMX_SC_C_PXL_LINK_MST2_VLD 12U
> +#define IMX_SC_C_SINGLE_MODE 13U
> +#define IMX_SC_C_ID 14U
> +#define IMX_SC_C_PXL_CLK_POLARITY 15U
> +#define IMX_SC_C_LINESTATE 16U
> +#define IMX_SC_C_PCIE_G_RST 17U
> +#define IMX_SC_C_PCIE_BUTTON_RST 18U
> +#define IMX_SC_C_PCIE_PERST 19U
> +#define IMX_SC_C_PHY_RESET 20U
> +#define IMX_SC_C_PXL_LINK_RATE_CORRECTION 21U
> +#define IMX_SC_C_PANIC 22U
> +#define IMX_SC_C_PRIORITY_GROUP 23U
> +#define IMX_SC_C_TXCLK 24U
> +#define IMX_SC_C_CLKDIV 25U
> +#define IMX_SC_C_DISABLE_50 26U
> +#define IMX_SC_C_DISABLE_125 27U
> +#define IMX_SC_C_SEL_125 28U
> +#define IMX_SC_C_MODE 29U
> +#define IMX_SC_C_SYNC_CTRL0 30U
> +#define IMX_SC_C_KACHUNK_CNT 31U
> +#define IMX_SC_C_KACHUNK_SEL 32U
> +#define IMX_SC_C_SYNC_CTRL1 33U
> +#define IMX_SC_C_DPI_RESET 34U
> +#define IMX_SC_C_MIPI_RESET 35U
> +#define IMX_SC_C_DUAL_MODE 36U
> +#define IMX_SC_C_VOLTAGE 37U
> +#define IMX_SC_C_PXL_LINK_SEL 38U
> +#define IMX_SC_C_OFS_SEL 39U
> +#define IMX_SC_C_OFS_AUDIO 40U
> +#define IMX_SC_C_OFS_PERIPH 41U
> +#define IMX_SC_C_OFS_IRQ 42U
> +#define IMX_SC_C_RST0 43U
> +#define IMX_SC_C_RST1 44U
> +#define IMX_SC_C_SEL0 45U
> +#define IMX_SC_C_CALIB0 46U
> +#define IMX_SC_C_CALIB1 47U
> +#define IMX_SC_C_CALIB2 48U
> +#define IMX_SC_C_IPG_DEBUG 49U
> +#define IMX_SC_C_IPG_DOZE 50U
> +#define IMX_SC_C_IPG_WAIT 51U
> +#define IMX_SC_C_IPG_STOP 52U
> +#define IMX_SC_C_IPG_STOP_MODE 53U
> +#define IMX_SC_C_IPG_STOP_ACK 54U
> +#define IMX_SC_C_SYNC_CTRL 55U
> +#define IMX_SC_C_OFS_AUDIO_ALT 56U
> +#define IMX_SC_C_DSP_BYP 57U
> +#define IMX_SC_C_CLK_GEN_EN 58U
> +#define IMX_SC_C_INTF_SEL 59U
> +#define IMX_SC_C_RXC_DLY 60U
> +#define IMX_SC_C_TIMER_SEL 61U
> +#define IMX_SC_C_LAST 62U
> +
> #endif /* __DT_BINDINGS_RSCRC_IMX_H */
> diff --git a/include/linux/firmware/imx/sci.h b/include/linux/firmware/imx/sci.h
> index 17ba4e4..3fa418a 100644
> --- a/include/linux/firmware/imx/sci.h
> +++ b/include/linux/firmware/imx/sci.h
> @@ -11,7 +11,6 @@
> #define _SC_SCI_H
>
> #include <linux/firmware/imx/ipc.h>
> -#include <linux/firmware/imx/types.h>
>
> #include <linux/firmware/imx/svc/misc.h> #include
> <linux/firmware/imx/svc/pm.h> diff --git a/include/linux/firmware/imx/types.h
> b/include/linux/firmware/imx/types.h
> deleted file mode 100644
> index 8082110..0000000
> --- a/include/linux/firmware/imx/types.h
> +++ /dev/null
> @@ -1,65 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0+ */
> -/*
> - * Copyright (C) 2016 Freescale Semiconductor, Inc.
> - * Copyright 2017~2018 NXP
> - *
> - * Header file containing types used across multiple service APIs.
> - */
> -
> -#ifndef _SC_TYPES_H
> -#define _SC_TYPES_H
> -
> -/*
> - * This type is used to indicate a control.
> - */
> -enum imx_sc_ctrl {
> - IMX_SC_C_TEMP = 0,
> - IMX_SC_C_TEMP_HI = 1,
> - IMX_SC_C_TEMP_LOW = 2,
> - IMX_SC_C_PXL_LINK_MST1_ADDR = 3,
> - IMX_SC_C_PXL_LINK_MST2_ADDR = 4,
> - IMX_SC_C_PXL_LINK_MST_ENB = 5,
> - IMX_SC_C_PXL_LINK_MST1_ENB = 6,
> - IMX_SC_C_PXL_LINK_MST2_ENB = 7,
> - IMX_SC_C_PXL_LINK_SLV1_ADDR = 8,
> - IMX_SC_C_PXL_LINK_SLV2_ADDR = 9,
> - IMX_SC_C_PXL_LINK_MST_VLD = 10,
> - IMX_SC_C_PXL_LINK_MST1_VLD = 11,
> - IMX_SC_C_PXL_LINK_MST2_VLD = 12,
> - IMX_SC_C_SINGLE_MODE = 13,
> - IMX_SC_C_ID = 14,
> - IMX_SC_C_PXL_CLK_POLARITY = 15,
> - IMX_SC_C_LINESTATE = 16,
> - IMX_SC_C_PCIE_G_RST = 17,
> - IMX_SC_C_PCIE_BUTTON_RST = 18,
> - IMX_SC_C_PCIE_PERST = 19,
> - IMX_SC_C_PHY_RESET = 20,
> - IMX_SC_C_PXL_LINK_RATE_CORRECTION = 21,
> - IMX_SC_C_PANIC = 22,
> - IMX_SC_C_PRIORITY_GROUP = 23,
> - IMX_SC_C_TXCLK = 24,
> - IMX_SC_C_CLKDIV = 25,
> - IMX_SC_C_DISABLE_50 = 26,
> - IMX_SC_C_DISABLE_125 = 27,
> - IMX_SC_C_SEL_125 = 28,
> - IMX_SC_C_MODE = 29,
> - IMX_SC_C_SYNC_CTRL0 = 30,
> - IMX_SC_C_KACHUNK_CNT = 31,
> - IMX_SC_C_KACHUNK_SEL = 32,
> - IMX_SC_C_SYNC_CTRL1 = 33,
> - IMX_SC_C_DPI_RESET = 34,
> - IMX_SC_C_MIPI_RESET = 35,
> - IMX_SC_C_DUAL_MODE = 36,
> - IMX_SC_C_VOLTAGE = 37,
> - IMX_SC_C_PXL_LINK_SEL = 38,
> - IMX_SC_C_OFS_SEL = 39,
> - IMX_SC_C_OFS_AUDIO = 40,
> - IMX_SC_C_OFS_PERIPH = 41,
> - IMX_SC_C_OFS_IRQ = 42,
> - IMX_SC_C_RST0 = 43,
> - IMX_SC_C_RST1 = 44,
> - IMX_SC_C_SEL0 = 45,
> - IMX_SC_C_LAST
> -};
> -
> -#endif /* _SC_TYPES_H */
> --
> 2.7.4
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [PATCH V2] dt-bindings: firmware: imx: Move system control into dt-binding headfile
2020-04-23 15:56 ` Aisheng Dong
@ 2020-04-23 22:28 ` Anson Huang
2020-04-24 1:48 ` Aisheng Dong
0 siblings, 1 reply; 4+ messages in thread
From: Anson Huang @ 2020-04-23 22:28 UTC (permalink / raw)
To: Aisheng Dong, shawnguo, s.hauer, kernel, festevam, rui.zhang,
daniel.lezcano, amit.kucheria, robh+dt, Leonard Crestez, linux,
Peng Fan, linux-kernel, linux-arm-kernel, linux-pm
Cc: dl-linux-imx
> Subject: RE: [PATCH V2] dt-bindings: firmware: imx: Move system control into
> dt-binding headfile
>
> > From: Anson Huang <Anson.Huang@nxp.com>
> > Sent: Thursday, April 23, 2020 11:36 PM
> >
> > i.MX8 SoCs DTS file needs system control macro definitions, so move
> > them into dt-binding headfile, then include/linux/firmware/imx/types.h
> > can be removed and those drivers using it should be changed accordingly.
> >
> > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
>
> You seems ignored my comments in V1.
> Usually we'd better to keep original author when sending patches if no
> fundamental changes.
Here is the details, the aim of this patch is to get rid of below patch in internal tree,
I did NOT check the details of internal tree and did the patch manually and did NOT
check how many patches I need in internal tree in order to make the build passed. After
checking it, looks like there are 3 patches, 2 are from you, and 1 from Jacky. Since these patches
need to be squashed into 1 patch, also fix minor comment in code and improve the comment,
so, should I put you as author or Jacky as author??
commit cb6603999367aeae57004638a4b8e43ee618dbec
Author: Jacky Bai <ping.bai@nxp.com>
Date: Mon Mar 9 14:41:44 2020 +0800
thermal: imx_sc_thermal: fix the build break caused non existent types.h
The types.h has been move to the dt-bindings/, so correct the included
header file to fix the build break.
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [PATCH V2] dt-bindings: firmware: imx: Move system control into dt-binding headfile
2020-04-23 22:28 ` Anson Huang
@ 2020-04-24 1:48 ` Aisheng Dong
0 siblings, 0 replies; 4+ messages in thread
From: Aisheng Dong @ 2020-04-24 1:48 UTC (permalink / raw)
To: Anson Huang, shawnguo, s.hauer, kernel, festevam, rui.zhang,
daniel.lezcano, amit.kucheria, robh+dt, Leonard Crestez, linux,
Peng Fan, linux-kernel, linux-arm-kernel, linux-pm
Cc: dl-linux-imx
> From: Anson Huang <anson.huang@nxp.com>
> Sent: Friday, April 24, 2020 6:29 AM
>
> > Subject: RE: [PATCH V2] dt-bindings: firmware: imx: Move system
> > control into dt-binding headfile
> >
> > > From: Anson Huang <Anson.Huang@nxp.com>
> > > Sent: Thursday, April 23, 2020 11:36 PM
> > >
> > > i.MX8 SoCs DTS file needs system control macro definitions, so move
> > > them into dt-binding headfile, then
> > > include/linux/firmware/imx/types.h
> > > can be removed and those drivers using it should be changed accordingly.
> > >
> > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> >
> > You seems ignored my comments in V1.
> > Usually we'd better to keep original author when sending patches if no
> > fundamental changes.
>
> Here is the details, the aim of this patch is to get rid of below patch in internal
> tree, I did NOT check the details of internal tree and did the patch manually and
> did NOT check how many patches I need in internal tree in order to make the
> build passed. After checking it, looks like there are 3 patches, 2 are from you,
> and 1 from Jacky. Since these patches need to be squashed into 1 patch, also fix
> minor comment in code and improve the comment, so, should I put you as
> author or Jacky as author??
>
As there're no code changes, for such a case, we usually keep origin author
and add Jacky signoff and you signoff.
Regards
Aisheng
> commit cb6603999367aeae57004638a4b8e43ee618dbec
> Author: Jacky Bai <ping.bai@nxp.com>
> Date: Mon Mar 9 14:41:44 2020 +0800
>
> thermal: imx_sc_thermal: fix the build break caused non existent types.h
>
> The types.h has been move to the dt-bindings/, so correct the included
> header file to fix the build break.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-04-24 1:48 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-04-23 15:35 [PATCH V2] dt-bindings: firmware: imx: Move system control into dt-binding headfile Anson Huang
2020-04-23 15:56 ` Aisheng Dong
2020-04-23 22:28 ` Anson Huang
2020-04-24 1:48 ` Aisheng Dong
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).