From: "Z.q. Hou" <zhiqiang.hou@nxp.com>
To: Rob Herring <robh@kernel.org>
Cc: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"bhelgaas@google.com" <bhelgaas@google.com>,
"mark.rutland@arm.com" <mark.rutland@arm.com>,
"l.subrahmanya@mobiveil.co.in" <l.subrahmanya@mobiveil.co.in>,
"shawnguo@kernel.org" <shawnguo@kernel.org>,
Leo Li <leoyang.li@nxp.com>,
"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>,
"catalin.marinas@arm.com" <catalin.marinas@arm.com>,
"will.deacon@arm.com" <will.deacon@arm.com>,
Mingkai Hu <mingkai.hu@nxp.com>,
"M.h. Lian" <minghuan.lian@nxp.com>,
Xiaowei Bao <xiaowei.bao@nxp.com>
Subject: RE: [PATCHv2 22/25] dt-bindings: pci: Add NXP Layerscape SoCs PCIe Gen4 controller
Date: Tue, 11 Dec 2018 09:50:08 +0000 [thread overview]
Message-ID: <AM6PR04MB57811FC96D79D5FEBDFA2A7F84A60@AM6PR04MB5781.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <20181205223843.GA2125@bogus>
Hi Rob,
Thanks a lot for your comments!
> -----Original Message-----
> From: Rob Herring <robh@kernel.org>
> Sent: 2018年12月6日 6:39
> To: Z.q. Hou <zhiqiang.hou@nxp.com>
> Cc: linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> bhelgaas@google.com; mark.rutland@arm.com;
> l.subrahmanya@mobiveil.co.in; shawnguo@kernel.org; Leo Li
> <leoyang.li@nxp.com>; lorenzo.pieralisi@arm.com;
> catalin.marinas@arm.com; will.deacon@arm.com; Mingkai Hu
> <mingkai.hu@nxp.com>; M.h. Lian <minghuan.lian@nxp.com>; Xiaowei Bao
> <xiaowei.bao@nxp.com>
> Subject: Re: [PATCHv2 22/25] dt-bindings: pci: Add NXP Layerscape SoCs PCIe
> Gen4 controller
>
> On Tue, Nov 20, 2018 at 09:27:51AM +0000, Z.q. Hou wrote:
> > From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> >
> > Add PCIe Gen4 controller DT bindings of NXP Layerscape SoCs.
> >
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> > ---
> > V2:
> > - Change to use the layerscape-pci.txt for PCIe Gen4 controller
> > dt-bindings
>
> Sorry someone suggested this, but it seems there's no point in having these in
> the same file. New IP block, do a new file.
Leo, can you help comment on this? I'm not sure which one is better.
>
> >
> > .../bindings/pci/layerscape-pci.txt | 57
> +++++++++++++++++++
> > MAINTAINERS | 8 +++
> > 2 files changed, 65 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > index 66df1e81e0b8..3ef8836b6e97 100644
> > --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > @@ -1,4 +1,6 @@
> > +====================================
> > Freescale Layerscape PCIe controller
> > +====================================
> >
> > This PCIe host controller is based on the Synopsys DesignWare PCIe IP
> > and thus inherits all the common properties defined in designware-pcie.txt.
> > @@ -58,3 +60,58 @@ Example:
> > <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> > <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
> > };
> > +
> > +===================================
> > +NXP Layerscape PCIe Gen4 controller
> > +===================================
> > +
> > +This PCIe controller is based on the Mobiveil PCIe IP and thus
> > +inherits all the common properties defined in mobiveil-pcie.txt.
> > +
> > +Required properties:
> > +- compatible: should contain the platform identifier such as:
> > + "fsl,lx2160a-pcie"
> > +- reg: base addresses and lengths of the PCIe controller register blocks.
> > + "config_axi_slave": PCIe controller registers
> > + "csr_axi_slave": Bridge config registers
>
> Wouldn't 'config' and 'csr' be sufficient? And these should be listed under
> reg-names.
>
> > +- interrupts: A list of interrupt outputs of the controller. Must
> > +contain an
> > + entry for each entry in the interrupt-names property.
> > +- interrupt-names: It could include the following entries:
> > + "intr": The interrupt that is asserted for controller interrupts
> > + "aer": Asserted for aer interrupt when chip support the aer interrupt
> with
> > + none MSI/MSI-X/INTx mode,but there is interrupt line for aer.
> > + "pme": Asserted for pme interrupt when chip support the pme interrupt
> with
> > + none MSI/MSI-X/INTx mode,but there is interrupt line for pme.
> > +- dma-coherent: Indicates that the hardware IP block can ensure the
> > +coherency
> > + of the data transferred from/to the IP block. This can avoid the
> > +software
> > + cache flush/invalid actions, and improve the performance significantly.
> > +- msi-parent : See the generic MSI binding described in
> > + Documentation/devicetree/bindings/interrupt-controller/msi.txt.
> > +
> > +Example:
> > +
> > + pcie@3400000 {
> > + compatible = "fsl,lx2160a-pcie";
> > + reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers
> */
> > + 0x80 0x00000000 0x0 0x00001000>; /* configuration space
> */
> > + reg-names = "csr_axi_slave", "config_axi_slave";
>
> The order should match what's defined above.
Yes, will change the order above in next version.
>
> Also, normally the config space would be the bigger region unless config
> accesses are windowed.
Yes, config accesses are windowed.
>
> > + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER
> interrupt */
> > + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt
> */
> > + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller
> interrupt */
> > + interrupt-names = "aer", "pme", "intr";
> > + #address-cells = <3>;
> > + #size-cells = <2>;
> > + device_type = "pci";
> > + apio-wins = <8>;
> > + ppio-wins = <8>;
>
> If these have specific values on your h/w, please specify above.
Confirmed with our HW team that PCIe@3600000 and PCIe@3800000 have different window number, will update the window number in next version.
>
> > + dma-coherent;
> > + bus-range = <0x0 0xff>;
> > + msi-parent = <&its>;
> > + ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0
> 0x40000000>;
> > + #interrupt-cells = <1>;
> > + interrupt-map-mask = <0 0 0 7>;
> > + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 2 &gic 0 0 GIC_SPI 110
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 3 &gic 0 0 GIC_SPI 111
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 4 &gic 0 0 GIC_SPI 112
> IRQ_TYPE_LEVEL_HIGH>;
> > + };
Thanks,
Zhiqiang
next prev parent reply other threads:[~2018-12-11 9:50 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-20 9:25 [PATCHv2 00/25] PCI: refactor Mobiveil driver and add PCIe Gen4 driver for NXP Layerscape SoCs Z.q. Hou
2018-11-20 9:25 ` [PATCHv2 01/25] PCI: mobiveil: uniform the register accessors Z.q. Hou
2018-11-20 10:17 ` M.h. Lian
2018-11-20 9:25 ` [PATCHv2 02/25] PCI: mobiveil: format the code without function change Z.q. Hou
2018-11-20 10:17 ` M.h. Lian
2018-11-20 9:25 ` [PATCHv2 03/25] PCI: mobiveil: correct the returned error number Z.q. Hou
2018-11-20 10:31 ` M.h. Lian
2018-11-20 9:26 ` [PATCHv2 04/25] PCI: mobiveil: remove flag MSI_FLAG_MULTI_PCI_MSI Z.q. Hou
2018-11-20 10:33 ` M.h. Lian
2018-11-20 9:26 ` [PATCHv2 05/25] PCI: mobiveil: correct PCI base address in MEM/IO outbound windows Z.q. Hou
2018-11-20 10:34 ` M.h. Lian
2018-11-20 9:26 ` [PATCHv2 06/25] PCI: mobiveil: replace the resource list iteration function Z.q. Hou
2018-11-20 10:35 ` M.h. Lian
2018-11-20 9:26 ` [PATCHv2 07/25] PCI: mobiveil: use WIN_NUM_0 explicitly for CFG outbound window Z.q. Hou
2018-11-20 10:35 ` M.h. Lian
2018-11-20 9:26 ` [PATCHv2 08/25] PCI: mobiveil: use the 1st inbound window for MEM inbound transactions Z.q. Hou
2018-11-20 10:59 ` M.h. Lian
2018-11-20 9:26 ` [PATCHv2 09/25] PCI: mobiveil: correct inbound/outbound window setup routines Z.q. Hou
2018-11-20 11:00 ` M.h. Lian
2018-11-20 11:00 ` M.h. Lian
2018-11-20 9:26 ` [PATCHv2 10/25] PCI: mobiveil: fix the INTx process error Z.q. Hou
2018-11-20 11:00 ` M.h. Lian
2018-11-20 9:26 ` [PATCHv2 11/25] PCI: mobiveil: only fix up the Class Code field Z.q. Hou
2018-11-20 11:01 ` M.h. Lian
2018-11-20 9:26 ` [PATCHv2 12/25] PCI: mobiveil: move out the link up waiting from mobiveil_host_init Z.q. Hou
2018-11-20 11:01 ` M.h. Lian
2018-11-20 9:26 ` [PATCHv2 13/25] PCI: mobiveil: move irq chained handler setup out of DT parse Z.q. Hou
2018-11-20 11:12 ` M.h. Lian
2018-11-20 9:27 ` [PATCHv2 14/25] PCI: mobiveil: initialize Primary/Secondary/Subordinate bus number Z.q. Hou
2018-11-20 11:13 ` M.h. Lian
2018-11-20 11:24 ` M.h. Lian
2018-11-20 9:27 ` [PATCHv2 15/25] dt-bindings: pci: mobiveil: change gpio_slave and apb_csr to optional Z.q. Hou
2018-11-20 11:25 ` M.h. Lian
2018-11-20 9:27 ` [PATCHv2 16/25] PCI: mobiveil: refactor Mobiveil PCIe Host Bridge IP driver Z.q. Hou
2018-11-20 11:25 ` M.h. Lian
2018-11-20 9:27 ` [PATCHv2 17/25] PCI: mobiveil: fix the checking of valid device Z.q. Hou
2018-11-20 11:26 ` M.h. Lian
2018-11-20 9:27 ` [PATCHv2 18/25] PCI: mobiveil: continue to initialize the host upon no PCIe link Z.q. Hou
2018-11-20 11:26 ` M.h. Lian
2018-11-20 9:27 ` [PATCHv2 19/25] PCI: mobiveil: disabled IB and OB windows set by bootloader Z.q. Hou
2018-11-20 11:26 ` M.h. Lian
2018-11-20 9:27 ` [PATCHv2 20/25] PCI: mobiveil: add Byte and Half-Word width register accessors Z.q. Hou
2018-11-20 11:27 ` M.h. Lian
2018-11-20 9:27 ` [PATCHv2 21/25] PCI: mobiveil: make mobiveil_host_init can be used to re-init host Z.q. Hou
2018-11-20 11:30 ` M.h. Lian
2018-11-20 9:27 ` [PATCHv2 22/25] dt-bindings: pci: Add NXP Layerscape SoCs PCIe Gen4 controller Z.q. Hou
2018-11-20 11:31 ` M.h. Lian
2018-12-05 22:38 ` Rob Herring
2018-12-05 22:40 ` Rob Herring
2018-12-11 9:50 ` Z.q. Hou [this message]
2018-11-20 9:27 ` [PATCHv2 23/25] PCI: mobiveil: add PCIe Gen4 RC driver for NXP Layerscape SoCs Z.q. Hou
2018-11-20 11:32 ` M.h. Lian
2018-11-20 9:28 ` [PATCHv2 24/25] arm64: dts: freescale: lx2160a: add pcie DT nodes Z.q. Hou
2018-11-20 11:32 ` M.h. Lian
2018-11-20 9:28 ` [PATCHv2 25/25] arm64: defconfig: Enable CONFIG_PCI_LAYERSCAPE_GEN4 Z.q. Hou
2018-11-20 11:33 ` M.h. Lian
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AM6PR04MB57811FC96D79D5FEBDFA2A7F84A60@AM6PR04MB5781.eurprd04.prod.outlook.com \
--to=zhiqiang.hou@nxp.com \
--cc=bhelgaas@google.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=l.subrahmanya@mobiveil.co.in \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mark.rutland@arm.com \
--cc=minghuan.lian@nxp.com \
--cc=mingkai.hu@nxp.com \
--cc=robh@kernel.org \
--cc=shawnguo@kernel.org \
--cc=will.deacon@arm.com \
--cc=xiaowei.bao@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).