linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Leo Li <leoyang.li@nxp.com>
To: "Z.q. Hou" <zhiqiang.hou@nxp.com>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"bhelgaas@google.com" <bhelgaas@google.com>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	"mark.rutland@arm.com" <mark.rutland@arm.com>,
	"l.subrahmanya@mobiveil.co.in" <l.subrahmanya@mobiveil.co.in>,
	"shawnguo@kernel.org" <shawnguo@kernel.org>,
	"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>
Cc: Mingkai Hu <mingkai.hu@nxp.com>,
	"M.h. Lian" <minghuan.lian@nxp.com>,
	Xiaowei Bao <xiaowei.bao@nxp.com>
Subject: RE: [PATCH 21/23] dt-bindings: pci: Add NXP LX SoCs PCIe controller
Date: Wed, 14 Nov 2018 18:51:43 +0000	[thread overview]
Message-ID: <AM6PR04MB5863192E246F3ED6F5812E4F8FC30@AM6PR04MB5863.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <AM6PR04MB57816EE50C61E064E6DC73A684C10@AM6PR04MB5781.eurprd04.prod.outlook.com>



> -----Original Message-----
> From: Z.q. Hou
> Sent: Sunday, November 11, 2018 5:48 PM
> To: Leo Li <leoyang.li@nxp.com>; linux-pci@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org; devicetree@vger.kernel.org; linux-
> kernel@vger.kernel.org; bhelgaas@google.com; robh+dt@kernel.org;
> mark.rutland@arm.com; l.subrahmanya@mobiveil.co.in;
> shawnguo@kernel.org; lorenzo.pieralisi@arm.com
> Cc: Mingkai Hu <mingkai.hu@nxp.com>; M.h. Lian
> <minghuan.lian@nxp.com>; Xiaowei Bao <xiaowei.bao@nxp.com>
> Subject: RE: [PATCH 21/23] dt-bindings: pci: Add NXP LX SoCs PCIe controller
> 
> Hi Leo,
> 
> Thanks a lot for your comments!
> 
> > -----Original Message-----
> > From: Leo Li
> > Sent: 2018年11月9日 5:29
> > To: Z.q. Hou <zhiqiang.hou@nxp.com>; linux-pci@vger.kernel.org;
> > linux-arm-kernel@lists.infradead.org; devicetree@vger.kernel.org;
> > linux-kernel@vger.kernel.org; bhelgaas@google.com; robh+dt@kernel.org;
> > mark.rutland@arm.com; l.subrahmanya@mobiveil.co.in;
> > shawnguo@kernel.org; lorenzo.pieralisi@arm.com
> > Cc: Mingkai Hu <mingkai.hu@nxp.com>; M.h. Lian
> > <minghuan.lian@nxp.com>; Xiaowei Bao <xiaowei.bao@nxp.com>
> > Subject: RE: [PATCH 21/23] dt-bindings: pci: Add NXP LX SoCs PCIe
> > controller
> >
> >
> >
> > > -----Original Message-----
> > > From: Z.q. Hou
> > > Sent: Tuesday, November 6, 2018 7:21 AM
> > > To: linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> > > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> > > bhelgaas@google.com; robh+dt@kernel.org; mark.rutland@arm.com;
> > > l.subrahmanya@mobiveil.co.in; shawnguo@kernel.org; Leo Li
> > > <leoyang.li@nxp.com>; lorenzo.pieralisi@arm.com
> > > Cc: Mingkai Hu <mingkai.hu@nxp.com>; M.h. Lian
> > > <minghuan.lian@nxp.com>; Xiaowei Bao <xiaowei.bao@nxp.com>; Z.q.
> > Hou
> > > <zhiqiang.hou@nxp.com>
> > > Subject: [PATCH 21/23] dt-bindings: pci: Add NXP LX SoCs PCIe
> > > controller
> > >
> > > From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> > >
> > > Add PCIe controller DT bindings of NXP LX series SoCs.
> >
> > I'm not sure if this is a good idea to name this controller LX PCIe controller.
> > Right now, it could be true that it is only used on LX series SoCs.
> > But I'm not sure if the LS series will not use this controller or LX
> > series will only use this controller in the future.
> >
> > Since the LX series is still using the layerscape branding, so
> > probably we should keep using the layerscape-pci.txt and define the PCIe
> Gen4 variant?
> 
> Yes, will add the new PCIe IP bindings to Layerscape-pci.txt.
> 
> >
> > Same comment for other places using the LX naming in this driver.
> 
> Do you have any suggestion about how to name the driver and prefix of
> structures in the driver?

Probably something like pcie-layerscape-gen4?

> 
> >
> > >
> > > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> > > ---
> > >  .../devicetree/bindings/pci/lx-pci.txt        | 52
> > +++++++++++++++++++
> > >  MAINTAINERS                                   |  8 +++
> > >  2 files changed, 60 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/pci/lx-pci.txt
> > >
> > > diff --git a/Documentation/devicetree/bindings/pci/lx-pci.txt
> > > b/Documentation/devicetree/bindings/pci/lx-pci.txt
> > > new file mode 100644
> > > index 000000000000..dc602fef93b0
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/pci/lx-pci.txt
> > > @@ -0,0 +1,52 @@
> > > +NXP LX PCIe controller
> > > +
> > > +This PCIe controller is based on the Mobiveil PCIe IP and thus
> > > +inherits all the common properties defined in mobiveil-pcie.txt.
> > > +
> > > +Required properties:
> > > +- compatible: should contain the platform identifier such as:
> > > +  "fsl,lx2160a-pcie"
> > > +- reg: base addresses and lengths of the PCIe controller register blocks.
> > > +  "config_axi_slave": PCIe controller registers
> > > +  "csr_axi_slave": Bridge config registers
> > > +- interrupts: A list of interrupt outputs of the controller. Must
> > > +contain an
> > > +  entry for each entry in the interrupt-names property.
> > > +- interrupt-names: It could include the following entries:
> > > +  "intr": The interrupt that is asserted for controller interrupts
> > > +  "aer": Asserted for aer interrupt when chip support the aer
> > > +interrupt
> > with
> > > +		 none MSI/MSI-X/INTx mode,but there is interrupt line for
> > > aer.
> > > +  "pme": Asserted for pme interrupt when chip support the pme
> > > + interrupt
> > > with
> > > +		 none MSI/MSI-X/INTx mode,but there is interrupt line for
> > > pme.
> > > +- dma-coherent: Indicates that the hardware IP block can ensure the
> > > +coherency
> > > +  of the data transferred from/to the IP block. This can avoid the
> > > +software
> > > +  cache flush/invalid actions, and improve the performance significantly.
> > > +- msi-parent : See the generic MSI binding described in
> > > +  Documentation/devicetree/bindings/interrupt-controller/msi.txt.
> > > +
> > > +Example:
> > > +
> > > +	pcie@3400000 {
> > > +		compatible = "fsl,lx2160a-pcie";
> > > +		reg = <0x00 0x03400000 0x0 0x00100000   /* controller
> > > registers */
> > > +		       0x80 0x00000000 0x0 0x00001000>; /* configuration
> > > space */
> > > +		reg-names = "csr_axi_slave", "config_axi_slave";
> > > +		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER
> > > interrupt */
> > > +			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME
> > > interrupt */
> > > +			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /*
> > > controller interrupt */
> > > +		interrupt-names = "aer", "pme", "intr";
> > > +		#address-cells = <3>;
> > > +		#size-cells = <2>;
> > > +		device_type = "pci";
> > > +		apio-wins = <8>;
> > > +		ppio-wins = <8>;
> > > +		dma-coherent;
> > > +		bus-range = <0x0 0xff>;
> > > +		msi-parent = <&its>;
> > > +		ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0
> > > 0x40000000>;
> > > +		#interrupt-cells = <1>;
> > > +		interrupt-map-mask = <0 0 0 7>;
> > > +		interrupt-map = <0000 0 0 1 &gic GIC_SPI 109
> > > IRQ_TYPE_LEVEL_HIGH>,
> > > +				<0000 0 0 2 &gic GIC_SPI 110
> > > IRQ_TYPE_LEVEL_HIGH>,
> > > +				<0000 0 0 3 &gic GIC_SPI 111
> > > IRQ_TYPE_LEVEL_HIGH>,
> > > +				<0000 0 0 4 &gic GIC_SPI 112
> > > IRQ_TYPE_LEVEL_HIGH>;
> > > +	};
> > > diff --git a/MAINTAINERS b/MAINTAINERS index
> > > 0c57ccff3188..7da555c8e2f5 100644
> > > --- a/MAINTAINERS
> > > +++ b/MAINTAINERS
> > > @@ -11252,6 +11252,14 @@ L:	linux-arm-kernel@lists.infradead.org
> > >  S:	Maintained
> > >  F:	drivers/pci/controller/dwc/*layerscape*
> > >
> > > +PCI DRIVER FOR NXP LX
> > > +M:	Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> > > +L:	linux-pci@vger.kernel.org
> > > +L:	linux-arm-kernel@lists.infradead.org
> > > +S:	Maintained
> > > +F:	Documentation/devicetree/bindings/pci/lx-pci.txt
> > > +F:	drivers/pci/controller/mobibeil/pci-lx.c
> > > +
> > >  PCI DRIVER FOR GENERIC OF HOSTS
> > >  M:	Will Deacon <will.deacon@arm.com>
> > >  L:	linux-pci@vger.kernel.org
> > > --
> > > 2.17.1
> Thanks,
> Zhiqiang

  reply	other threads:[~2018-11-14 18:51 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-06 13:19 [PATCH 00/23] PCI: refactor the Mobiveil driver and add PCIe support for NXP LX SoCs Z.q. Hou
2018-11-06 13:19 ` [PATCH 01/23] PCI: mobiveil: uniform the register accessors Z.q. Hou
2018-11-06 13:19 ` [PATCH 02/23] PCI: mobiveil: format the code without function change Z.q. Hou
2018-11-06 13:19 ` [PATCH 03/23] PCI: mobiveil: correct the returned error number Z.q. Hou
2018-11-06 13:19 ` [PATCH 04/23] PCI: mobiveil: remove flag MSI_FLAG_MULTI_PCI_MSI Z.q. Hou
2018-11-06 13:19 ` [PATCH 05/23] PCI: mobiveil: correct PCI base address in MEM/IO outbound windows Z.q. Hou
2018-11-06 13:19 ` [PATCH 06/23] PCI: mobiveil: replace the resource list iteration function Z.q. Hou
2018-11-06 13:19 ` [PATCH 07/23] PCI: mobiveil: use WIN_NUM_0 explicitly for CFG outbound window Z.q. Hou
2018-11-06 13:19 ` [PATCH 08/23] PCI: mobiveil: use the 1st inbound window for MEM inbound transactions Z.q. Hou
2018-11-06 13:20 ` [PATCH 09/23] PCI: mobiveil: correct the inbound/outbound window setup routine Z.q. Hou
2018-11-06 13:20 ` [PATCH 10/23] PCI: mobiveil: fix the INTx process error Z.q. Hou
2018-11-15  2:59   ` Z.q. Hou
2018-11-06 13:20 ` [PATCH 11/23] PCI: mobiveil: only fixup the Class Code field Z.q. Hou
2018-11-06 13:20 ` [PATCH 12/23] PCI: mobiveil: move out the link up waiting from mobiveil_host_init Z.q. Hou
2018-11-06 13:20 ` [PATCH 13/23] PCI: mobiveil: move irq chained handler setup out of DT parse Z.q. Hou
2018-11-06 13:20 ` [PATCH 14/23] PCI: mobiveil: initialize Primary/Secondary/Subordinate bus number Z.q. Hou
2018-11-06 13:20 ` [PATCH 15/23] dt-bindings: pci: mobiveil: change gpio_slave and apb_csr to optional Z.q. Hou
     [not found]   ` <5bea0eb7.1c69fb81.dd309.4a26@mx.google.com>
2018-11-13  6:08     ` Z.q. Hou
2018-11-14  9:33   ` Subrahmanya Lingappa
2018-11-15  2:27     ` Z.q. Hou
2018-11-06 13:20 ` [PATCH 16/23] PCI: mobiveil: refactor the Mobiveil driver Z.q. Hou
2018-11-06 13:20 ` [PATCH 17/23] PCI: mobiveil: continue to initialize the host upon no PCIe link Z.q. Hou
2018-11-06 13:21 ` [PATCH 18/23] PCI: mobiveil: disabled IB and OB windows set by bootloader Z.q. Hou
2018-11-06 13:21 ` [PATCH 19/23] PCI: mobiveil: add Byte and Half-Word width register accessors Z.q. Hou
2018-11-06 13:21 ` [PATCH 20/23] PCI: mobiveil: change prototype of function mobiveil_host_init Z.q. Hou
2018-11-06 13:21 ` [PATCH 21/23] dt-bindings: pci: Add NXP LX SoCs PCIe controller Z.q. Hou
2018-11-08 21:29   ` Leo Li
2018-11-12  1:48     ` Z.q. Hou
2018-11-14 18:51       ` Leo Li [this message]
2018-11-15  2:47         ` Z.q. Hou
2018-11-06 13:21 ` [PATCH 22/23] PCI: mobiveil: add PCIe RC driver for NXP LX series SoCs Z.q. Hou
2018-11-06 13:21 ` [PATCH 23/23] arm64: dts: freescale: lx2160a: add pcie DT nodes Z.q. Hou
2018-12-03 11:58 ` [PATCH 00/23] PCI: refactor the Mobiveil driver and add PCIe support for NXP LX SoCs Lorenzo Pieralisi
2018-12-10 10:16   ` Subrahmanya Lingappa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AM6PR04MB5863192E246F3ED6F5812E4F8FC30@AM6PR04MB5863.eurprd04.prod.outlook.com \
    --to=leoyang.li@nxp.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=l.subrahmanya@mobiveil.co.in \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=minghuan.lian@nxp.com \
    --cc=mingkai.hu@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=xiaowei.bao@nxp.com \
    --cc=zhiqiang.hou@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).