RE: [PATCH v10 0/2] Add the driver for Intel Keem Bay SoC timer block

["Sanil, Shruthi" <shruthi.sanil@intel.com>]

Gentle Reminder!

Regards,
Shruthi

> -----Original Message-----
> From: Sanil, Shruthi <shruthi.sanil@intel.com>
> Sent: Tuesday, March 22, 2022 6:30 PM
> To: daniel.lezcano@linaro.org; tglx@linutronix.de; robh+dt@kernel.org;
> linux-kernel@vger.kernel.org; devicetree@vger.kernel.org
> Cc: andriy.shevchenko@linux.intel.com; mgross@linux.intel.com; Thokala,
> Srikanth <srikanth.thokala@intel.com>; Raja Subramanian, Lakshmi Bai
> <lakshmi.bai.raja.subramanian@intel.com>; Sangannavar, Mallikarjunappa
> <mallikarjunappa.sangannavar@intel.com>; Sanil, Shruthi
> <shruthi.sanil@intel.com>
> Subject: [PATCH v10 0/2] Add the driver for Intel Keem Bay SoC timer block
> 
> From: Shruthi Sanil <shruthi.sanil@intel.com>
> 
> The timer block supports 1 64-bit free running counter and 8 32-bit general
> purpose timers.
> 
> Patch 1 holds the device tree binding documentation.
> Patch 2 holds the device driver.
> 
> This driver is tested on the Keem Bay evaluation module board.
> 
> Changes since v9:
> - Updated the error message with the macro FW_BUG wherever applicable.
> 
> Changes since v8:
> - The clockevent stucture has been declared as a global static variable,
>   rather than allocating memory using kzalloc during probing.
> - Updated the print statement indicating the configuration missing as the FW
> Bug.
> - Updated the comments in the function keembay_timer_isr().
> - Updated the dt-binding to remove 'oneOf' as there is only 1 entry.
> - Updated the dt-binding description clearly indicating that
>   the descrption is about the undelying HW.
> 
> Changes since v7:
> - Added back the compatible string "intel,keembay-gpt-creg"
>   as an enum to the mfd device node in the device tree bindings.
> - As the timer is used as a broadcast timer during CPU idle,
>   only one timer is needed. Hence updated the driver accordingly
>   incorporating the review comments.
> 
> Changes since v6:
> - Removed the unused compatible string from the mfd device node
>   to fix the error thrown by the make dt-binding command.
> 
> Changes since v5:
> - Created a MFD device for the common configuration register
>   in the device tree bindings.
> - Updated the timer driver with the MFD framework to access the
>   common configuration register.
> 
> Changes since v4:
> - Updated the description in the device tree bindings.
> - Updated the unit address of all the timers and counter
>   in the device tree binding.
> 
> Changes since v3:
> - Update in KConfig file to support COMPILE_TEST for Keem Bay timer.
> - Update in device tree bindings to remove status field.
> - Update in device tree bindings to remove 64-bit address space for
>   the child nodes by using non-empty ranges.
> 
> Changes since v2:
> - Add multi timer support.
> - Update in the device tree binding to support multi timers.
> - Code optimization.
> 
> Changes since v1:
> - Add support for KEEMBAY_TIMER to get selected through
> Kconfig.platforms.
> - Add CLOCK_EVT_FEAT_DYNIRQ as part of clockevent feature.
> - Avoid overlapping reg regions across 2 device nodes.
> - Simplify 2 device nodes as 1 because both are from same IP block.
> - Adapt the driver code according to the new simplified devicetree.
> 
> Shruthi Sanil (2):
>   dt-bindings: timer: Add bindings for Intel Keem Bay SoC Timer
>   clocksource: Add Intel Keem Bay timer support
> 
>  .../bindings/timer/intel,keembay-timer.yaml   | 125 ++++++++++
>  MAINTAINERS                                   |   6 +
>  drivers/clocksource/Kconfig                   |  11 +
>  drivers/clocksource/Makefile                  |   1 +
>  drivers/clocksource/timer-keembay.c           | 226 ++++++++++++++++++
>  5 files changed, 369 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml
>  create mode 100644 drivers/clocksource/timer-keembay.c
> 
> 
> base-commit: ffb217a13a2eaf6d5bd974fc83036a53ca69f1e2
> --
> 2.17.1