linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rajan Vaja <RAJANV@xilinx.com>
To: Rajan Vaja <RAJANV@xilinx.com>, Michal Simek <michals@xilinx.com>,
	"daniel.lezcano@linaro.org" <daniel.lezcano@linaro.org>,
	"tglx@linutronix.de" <tglx@linutronix.de>
Cc: "linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	Jolly Shah <JOLLYS@xilinx.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: RE: [PATCH] drivers: clocksource: Use ttc driver as platform driver
Date: Tue, 26 Nov 2019 11:53:51 +0000	[thread overview]
Message-ID: <BYAPR02MB40555C1884AA318D9E79EFFEB7450@BYAPR02MB4055.namprd02.prod.outlook.com> (raw)
In-Reply-To: <1573122988-18399-1-git-send-email-rajan.vaja@xilinx.com>

Request for review.

Thanks,
Rajan

> -----Original Message-----
> From: Rajan Vaja <rajan.vaja@xilinx.com>
> Sent: 07 November 2019 04:06 PM
> To: Michal Simek <michals@xilinx.com>; daniel.lezcano@linaro.org;
> tglx@linutronix.de
> Cc: linux-arm-kernel@lists.infradead.org; Jolly Shah <JOLLYS@xilinx.com>; linux-
> kernel@vger.kernel.org; Rajan Vaja <RAJANV@xilinx.com>
> Subject: [PATCH] drivers: clocksource: Use ttc driver as platform driver
> 
> Currently TTC driver is TIMER_OF_DECLARE type driver. Because of
> that, TTC driver may be initialized before other clock drivers. If
> TTC driver is dependent on that clock driver then initialization of
> TTC driver will failed.
> 
> So use TTC driver as platform driver instead of using
> TIMER_OF_DECLARE.
> 
> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
> ---
>  drivers/clocksource/timer-cadence-ttc.c | 26 ++++++++++++++++++--------
>  1 file changed, 18 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/clocksource/timer-cadence-ttc.c b/drivers/clocksource/timer-
> cadence-ttc.c
> index 88fe2e9..38858e1 100644
> --- a/drivers/clocksource/timer-cadence-ttc.c
> +++ b/drivers/clocksource/timer-cadence-ttc.c
> @@ -15,6 +15,8 @@
>  #include <linux/of_irq.h>
>  #include <linux/slab.h>
>  #include <linux/sched_clock.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> 
>  /*
>   * This driver configures the 2 16/32-bit count-up timers as follows:
> @@ -464,13 +466,7 @@ static int __init ttc_setup_clockevent(struct clk *clk,
>  	return 0;
>  }
> 
> -/**
> - * ttc_timer_init - Initialize the timer
> - *
> - * Initializes the timer hardware and register the clock source and clock event
> - * timers with Linux kernal timer framework
> - */
> -static int __init ttc_timer_init(struct device_node *timer)
> +static int __init ttc_timer_probe(struct platform_device *pdev)
>  {
>  	unsigned int irq;
>  	void __iomem *timer_baseaddr;
> @@ -478,6 +474,7 @@ static int __init ttc_timer_init(struct device_node *timer)
>  	static int initialized;
>  	int clksel, ret;
>  	u32 timer_width = 16;
> +	struct device_node *timer = pdev->dev.of_node;
> 
>  	if (initialized)
>  		return 0;
> @@ -532,4 +529,17 @@ static int __init ttc_timer_init(struct device_node *timer)
>  	return 0;
>  }
> 
> -TIMER_OF_DECLARE(ttc, "cdns,ttc", ttc_timer_init);
> +static const struct of_device_id ttc_timer_of_match[] = {
> +	{.compatible = "cdns,ttc"},
> +	{},
> +};
> +
> +MODULE_DEVICE_TABLE(of, ttc_timer_of_match);
> +
> +static struct platform_driver ttc_timer_driver = {
> +	.driver = {
> +		.name	= "cdns_ttc_timer",
> +		.of_match_table = ttc_timer_of_match,
> +	},
> +};
> +builtin_platform_driver_probe(ttc_timer_driver, ttc_timer_probe);
> --
> 2.7.4


  reply	other threads:[~2019-11-26 11:54 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-07 10:36 [PATCH] drivers: clocksource: Use ttc driver as platform driver Rajan Vaja
2019-11-26 11:53 ` Rajan Vaja [this message]
2019-12-05 16:24   ` Daniel Lezcano
2019-12-17 15:00     ` Michal Simek
2020-01-16 21:31 ` [tip: timers/core] clocksource/drivers/cadence-ttc: " tip-bot2 for Rajan Vaja
  -- strict thread matches above, loose matches on Subject: below --
2019-11-07 10:30 [PATCH] drivers: clocksource: " Rajan Vaja
2019-11-07 10:34 ` Rajan Vaja
2019-11-26 11:35 ` Rajan Vaja
2019-11-26 11:56   ` Rajan Vaja

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=BYAPR02MB40555C1884AA318D9E79EFFEB7450@BYAPR02MB4055.namprd02.prod.outlook.com \
    --to=rajanv@xilinx.com \
    --cc=JOLLYS@xilinx.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michals@xilinx.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).