linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Pawel Laszczak <pawell@cadence.com>
To: Peter Chen <peter.chen@kernel.org>
Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>,
	"linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Rahul Kumar <kurahul@cadence.com>
Subject: RE: [PATCH v2] usb: cdnsp: Fixes issue with Configure Endpoint command
Date: Mon, 12 Apr 2021 03:30:17 +0000	[thread overview]
Message-ID: <BYAPR07MB5381A83C23875BBBE77CF277DD709@BYAPR07MB5381.namprd07.prod.outlook.com> (raw)
In-Reply-To: <20210410012208.GA28768@b29397-desktop>

>
>On 21-04-07 08:36:29, Pawel Laszczak wrote:
>> From: Pawel Laszczak <pawell@cadence.com>
>>
>> Patch adds flag EP_UNCONFIGURED to detect whether endpoint was
>> unconfigured. This flag is set in cdnsp_reset_device after Reset Device
>> command. Among others this command disables all non control endpoints.
>> Flag is used in cdnsp_gadget_ep_disable to protect controller against
>> invoking Configure Endpoint command on disabled endpoint. Lack of this
>> protection in some cases caused that Configure Endpoint command completed
>> with Context State Error code completion.
>>
>> Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
>> Signed-off-by: Pawel Laszczak <pawell@cadence.com>
>
>Pawel, it is a little late for v5.12, I apply it to v5.13-rc1 if you
>don't mind.
>
>Peter

Yes, you can apply it to v5.13-rc1.

Thanks.

r
>>
>> ---
>> Changelog:
>> v2:
>> - removed useless blank line
>> - changed the EP_UNCONFIGURED to limit changes in patch
>>
>>  drivers/usb/cdns3/cdnsp-gadget.c | 17 ++++++++++++-----
>>  drivers/usb/cdns3/cdnsp-gadget.h |  1 +
>>  2 files changed, 13 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/usb/cdns3/cdnsp-gadget.c b/drivers/usb/cdns3/cdnsp-gadget.c
>> index d7d4bdd57f46..56707b6b0f57 100644
>> --- a/drivers/usb/cdns3/cdnsp-gadget.c
>> +++ b/drivers/usb/cdns3/cdnsp-gadget.c
>> @@ -727,7 +727,7 @@ int cdnsp_reset_device(struct cdnsp_device *pdev)
>>  	 * are in Disabled state.
>>  	 */
>>  	for (i = 1; i < CDNSP_ENDPOINTS_NUM; ++i)
>> -		pdev->eps[i].ep_state |= EP_STOPPED;
>> +		pdev->eps[i].ep_state |= EP_STOPPED | EP_UNCONFIGURED;
>>
>>  	trace_cdnsp_handle_cmd_reset_dev(slot_ctx);
>>
>> @@ -942,6 +942,7 @@ static int cdnsp_gadget_ep_enable(struct usb_ep *ep,
>>
>>  	pep = to_cdnsp_ep(ep);
>>  	pdev = pep->pdev;
>> +	pep->ep_state &= ~EP_UNCONFIGURED;
>>
>>  	if (dev_WARN_ONCE(pdev->dev, pep->ep_state & EP_ENABLED,
>>  			  "%s is already enabled\n", pep->name))
>> @@ -1023,9 +1024,13 @@ static int cdnsp_gadget_ep_disable(struct usb_ep *ep)
>>  		goto finish;
>>  	}
>>
>> -	cdnsp_cmd_stop_ep(pdev, pep);
>>  	pep->ep_state |= EP_DIS_IN_RROGRESS;
>> -	cdnsp_cmd_flush_ep(pdev, pep);
>> +
>> +	/* Endpoint was unconfigured by Reset Device command. */
>> +	if (!(pep->ep_state & EP_UNCONFIGURED)) {
>> +		cdnsp_cmd_stop_ep(pdev, pep);
>> +		cdnsp_cmd_flush_ep(pdev, pep);
>> +	}
>>
>>  	/* Remove all queued USB requests. */
>>  	while (!list_empty(&pep->pending_list)) {
>> @@ -1043,10 +1048,12 @@ static int cdnsp_gadget_ep_disable(struct usb_ep *ep)
>>
>>  	cdnsp_endpoint_zero(pdev, pep);
>>
>> -	ret = cdnsp_update_eps_configuration(pdev, pep);
>> +	if (!(pep->ep_state & EP_UNCONFIGURED))
>> +		ret = cdnsp_update_eps_configuration(pdev, pep);
>> +
>>  	cdnsp_free_endpoint_rings(pdev, pep);
>>
>> -	pep->ep_state &= ~EP_ENABLED;
>> +	pep->ep_state &= ~(EP_ENABLED | EP_UNCONFIGURED);
>>  	pep->ep_state |= EP_STOPPED;
>>
>>  finish:
>> diff --git a/drivers/usb/cdns3/cdnsp-gadget.h b/drivers/usb/cdns3/cdnsp-gadget.h
>> index 6bbb26548c04..783ca8ffde00 100644
>> --- a/drivers/usb/cdns3/cdnsp-gadget.h
>> +++ b/drivers/usb/cdns3/cdnsp-gadget.h
>> @@ -835,6 +835,7 @@ struct cdnsp_ep {
>>  #define EP_WEDGE		BIT(4)
>>  #define EP0_HALTED_STATUS	BIT(5)
>>  #define EP_HAS_STREAMS		BIT(6)
>> +#define EP_UNCONFIGURED		BIT(7)
>>
>>  	bool skip;
>>  };
>> --
>> 2.25.1
>>
>
>--
>
>Thanks,
>Peter Chen

--

Regards,
Pawel Laszczak

      reply	other threads:[~2021-04-12  3:30 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-07  6:36 [PATCH v2] usb: cdnsp: Fixes issue with Configure Endpoint command Pawel Laszczak
2021-04-10  1:11 ` Peter Chen
2021-04-10  1:22 ` Peter Chen
2021-04-12  3:30   ` Pawel Laszczak [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=BYAPR07MB5381A83C23875BBBE77CF277DD709@BYAPR07MB5381.namprd07.prod.outlook.com \
    --to=pawell@cadence.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kurahul@cadence.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=peter.chen@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).