RE: [PATCH] usb: cdns3: Fixed incorrect gadget state

[Pawel Laszczak <pawell@cadence.com>]

>
>On 21-06-28 03:46:38, Pawel Laszczak wrote:
>> >
>> >On 21-06-23 09:02:47, Pawel Laszczak wrote:
>> >> From: Pawel Laszczak <pawell@cadence.com>
>> >>
>> >> For delayed status phase, the usb_gadget->state was set
>> >> to USB_STATE_ADDRESS and it has never been updated to
>> >> USB_STATE_CONFIGURED.
>> >> Patch updates the gadget state to correct USB_STATE_CONFIGURED.
>> >> As a result of this bug the controller was not able to enter to
>> >> Test Mode while using MSC function.
>> >
>> >Pawel, would you please describe more about this issue? I remember the cdns3
>> >controller at i.mx series SoC could enter test mode by using current
>> >code.
>>
>> The issue occurs only for MSC class. MSC class has delayed status stage, so
>> after returning from cdns3_req_ep0_set_configuration function called
>> for Set Configuration driver remains in USB_STATE_ADDRESS.
>>
>> In order to enter to test mode driver needs meet the condition included in
>> cdns3_ep0_feature_handle_device function:
>> 		if (state != USB_STATE_CONFIGURED || speed > USB_SPEED_HIGH)
>> 			return -EINVAL;
>>
>> But it is still in USB_STATE_ADDRESS, because there was delayed status stage.
>> To fix issue driver state must be updated to USB_STATE_CONFIGURED before
>> or after  finishing status stage.
>>
>
>I am wondering if the cdns3 driver set gadget state as USB_STATE_ADDRESS
>is correct for delayed status stage, since the composite core has already
>set it as USB_STATE_CONFIGURED at function set_config.

Composite core set the driver to USB_STATE_CONFIGURED, then 
cdns3 for delayed status stage restore state to USB_STATE_ADDRESS, because
the configuration has not been completed  yet.
However, after the configuration is successfully completed driver should
set the state again to USB_STATE_CONFIGURED.
The best place to do this is the completion event for status stage, but we haven't such
event in this controller, so I've put it just after preparing controller for sending
status stage.
The same solution I found in e.g https://elixir.bootlin.com/linux/latest/source/drivers/usb/dwc3/ep0.c#L134

The other solution is to update gadget state in composite core before or after sending delayed status stage,
but  such solution will have impact for other UDC drivers .

>> >
>> >>
>> >> Cc: <stable@vger.kernel.org>
>> >> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
>> >> Signed-off-by: Pawel Laszczak <pawell@cadence.com>
>> >> ---
>> >>  drivers/usb/cdns3/cdns3-ep0.c | 1 +
>> >>  1 file changed, 1 insertion(+)
>> >>
>> >> diff --git a/drivers/usb/cdns3/cdns3-ep0.c b/drivers/usb/cdns3/cdns3-ep0.c
>> >> index 9a17802275d5..ec5bfd8944c3 100644
>> >> --- a/drivers/usb/cdns3/cdns3-ep0.c
>> >> +++ b/drivers/usb/cdns3/cdns3-ep0.c
>> >> @@ -731,6 +731,7 @@ static int cdns3_gadget_ep0_queue(struct usb_ep *ep,
>> >>  		request->actual = 0;
>> >>  		priv_dev->status_completion_no_call = true;
>> >>  		priv_dev->pending_status_request = request;
>> >> +		usb_gadget_set_state(&priv_dev->gadget, USB_STATE_CONFIGURED);
>> >>  		spin_unlock_irqrestore(&priv_dev->lock, flags);
>> >>
>> >>  		/*
>> >> --
>> >> 2.25.1
>> >>
>> >
>> --
>>
>> Thanks,
>> Pawel Laszczak
>>
>
>--
>
>Thanks,
>Peter Chen

--

Regards,
Pawel Laszczak