Re: [PATCH v2 3/3] arm64: allwinner: Enable Bluetooth and WiFi on sopine baseboard

[Vasily Khoruzhick <anarsoul@gmail.com>]

On Mon, Apr 6, 2020 at 10:58 PM Alistair Francis <alistair@alistair23.me> wrote:
>
> The sopine board has an optional RTL8723BS WiFi + BT module that can be
> connected to UART1. Add this to the device tree so that it will work
> for users if connected.

It's optional, so patch should have 'DO-NOT-MERGE' tag and appropriate
change should go into dt overlay.

> Signed-off-by: Alistair Francis <alistair@alistair23.me>
> ---
>  .../allwinner/sun50i-a64-sopine-baseboard.dts | 23 +++++++++++++++++++
>  1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
> index 2f6ea9f3f6a2..f4be1bc56b07 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
> @@ -103,6 +103,16 @@ ext_rgmii_phy: ethernet-phy@1 {
>         };
>  };
>
> +&mmc1 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&mmc1_pins>;
> +       vmmc-supply = <&reg_dldo4>;
> +       vqmmc-supply = <&reg_eldo1>;
> +       non-removable;
> +       bus-width = <4>;
> +       status = "okay";
> +};
> +
>  &mmc2 {
>         pinctrl-names = "default";
>         pinctrl-0 = <&mmc2_pins>;
> @@ -174,6 +184,19 @@ &uart0 {
>         status = "okay";
>  };
>
> +&uart1 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
> +       uart-has-rtscts = <1>;
> +       status = "okay";
> +
> +       bluetooth {
> +               compatible = "realtek,rtl8723bs-bt";
> +               device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
> +               host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
> +       };
> +};
> +
>  /* On Pi-2 connector */
>  &uart2 {
>         pinctrl-names = "default";
> --
> 2.25.1
>