[PATCH 4.9 00/44] 4.9.154-stable review

[PATCH 4.9 00/44] 4.9.154-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.154 release.
There are 44 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu Jan 31 11:31:22 UTC 2019.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.154-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.154-rc1

Anand Jain <anand.jain@oracle.com>
    btrfs: dev-replace: go back to suspended state if target device is missing

Jeff Mahoney <jeffm@suse.com>
    btrfs: fix error handling in btrfs_dev_replace_start

Pan Bian <bianpan2016@163.com>
    f2fs: read page index before freeing

Raju Rangoju <rajur@chelsio.com>
    nvmet-rdma: fix null dereference under heavy load

Israel Rukshin <israelr@mellanox.com>
    nvmet-rdma: Add unlikely for response allocated check

David Hildenbrand <david@redhat.com>
    s390/smp: Fix calling smp_call_ipl_cpu() from ipl CPU

Marc Zyngier <marc.zyngier@arm.com>
    irqchip/gic-v3-its: Align PCI Multi-MSI allocation on their size

Milian Wolff <milian.wolff@kdab.com>
    perf unwind: Take pgoff into account when reporting elf to libdwfl

Martin Vuille <jpmv27@aim.com>
    perf unwind: Unwind with libdw doesn't take symfs into account

Nicolas Pitre <nicolas.pitre@linaro.org>
    vt: invoke notifier on screen size change

Oliver Hartkopp <socketcan@hartkopp.net>
    can: bcm: check timer values before ktime conversion

Manfred Schlaegl <manfred.schlaegl@ginzinger.com>
    can: dev: __can_get_echo_skb(): fix bogous check for non-existing skb by removing it

Daniel Drake <drake@endlessm.com>
    x86/kaslr: Fix incorrect i8254 outb() parameters

Dave Hansen <dave.hansen@linux.intel.com>
    x86/selftests/pkeys: Fork() to check for state being preserved

Alexander Popov <alex.popov@linux.com>
    KVM: x86: Fix single-step debugging

Joe Thornber <ejt@redhat.com>
    dm thin: fix passdown_double_checking_shared_status()

Dan Williams <dan.j.williams@intel.com>
    acpi/nfit: Fix command-supported detection

Dan Williams <dan.j.williams@intel.com>
    acpi/nfit: Block function zero DSMs

Dmitry Torokhov <dmitry.torokhov@gmail.com>
    Input: uinput - fix undefined behavior in uinput_validate_absinfo()

Rasmus Villemoes <linux@rasmusvillemoes.dk>
    compiler.h: enable builtin overflow checkers and add fallback code

Tom Panfil <tom@steelseries.com>
    Input: xpad - add support for SteelSeries Stratus Duo

Pavel Shilovsky <pshilov@microsoft.com>
    CIFS: Do not reconnect TCP session in add_credits()

Pavel Shilovsky <pshilov@microsoft.com>
    CIFS: Fix possible hang during async MTU reads and writes

Paul Fulghum <paulkf@microgate.com>
    tty/n_hdlc: fix __might_sleep warning

Samir Virmani <samir@embedur.com>
    uart: Fix crash in uart_write and uart_put_char

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    tty: Handle problem if line discipline does not have receive_buf

Michael Straube <straube.linux@gmail.com>
    staging: rtl8188eu: Add device code for D-Link DWA-121 rev B1

Gustavo A. R. Silva <gustavo@embeddedor.com>
    char/mwave: fix potential Spectre v1 vulnerability

Gerald Schaefer <gerald.schaefer@de.ibm.com>
    s390/smp: fix CPU hotplug deadlock with CPU rescan

Christian Borntraeger <borntraeger@de.ibm.com>
    s390/early: improve machine detection

Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
    ARC: perf: map generic branches to correct hardware condition

Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
    ARCv2: lib: memeset: fix doing prefetchw outside of buffer

Gustavo A. R. Silva <gustavo@embeddedor.com>
    ASoC: rt5514-spi: Fix potential NULL pointer dereference

Kangjie Lu <kjlu@umn.edu>
    ASoC: atom: fix a missing check of snd_pcm_lib_malloc_pages

Charles Yeh <charlesyeh522@gmail.com>
    USB: serial: pl2303: add new PID to support PL2303TB

Max Schulze <max.schulze@posteo.de>
    USB: serial: simple: add Motorola Tetra TPG2200 device id

Vijay Viswanath <vviswana@codeaurora.org>
    mmc: Kconfig: Enable CONFIG_MMC_SDHCI_IO_ACCESSORS

Paolo Abeni <pabeni@redhat.com>
    ipfrag: really prevent allocation on netns exit

Cong Wang <xiyou.wangcong@gmail.com>
    net_sched: refetch skb protocol for each filter

Ido Schimmel <idosch@mellanox.com>
    net: ipv4: Fix memory leak in network namespace dismantle

Jason Wang <jasowang@redhat.com>
    vhost: log dirty page correctly

Ross Lagerwall <ross.lagerwall@citrix.com>
    openvswitch: Avoid OOB read when parsing flow nlattrs

Ross Lagerwall <ross.lagerwall@citrix.com>
    net: Fix usage of pskb_trim_rcsum

Yunjian Wang <wangyunjian@huawei.com>
    net: bridge: Fix ethernet header pointer before check skb forwardable


-------------

Diffstat:

 Makefile                                      |   4 +-
 arch/arc/include/asm/perf_event.h             |   3 +-
 arch/arc/lib/memset-archs.S                   |  40 ++++-
 arch/s390/kernel/early.c                      |   4 +-
 arch/s390/kernel/setup.c                      |   2 +
 arch/s390/kernel/smp.c                        |  12 +-
 arch/x86/kvm/x86.c                            |   3 +-
 arch/x86/lib/kaslr.c                          |   4 +-
 drivers/acpi/nfit/core.c                      |  57 +++++--
 drivers/char/mwave/mwavedd.c                  |   7 +
 drivers/input/joystick/xpad.c                 |   3 +
 drivers/input/misc/uinput.c                   |   5 +-
 drivers/irqchip/irq-gic-v3-its.c              |  25 ++--
 drivers/md/dm-thin-metadata.c                 |   4 +-
 drivers/md/dm-thin-metadata.h                 |   2 +-
 drivers/md/dm-thin.c                          |  10 +-
 drivers/mmc/host/Kconfig                      |   1 +
 drivers/net/can/dev.c                         |  27 ++--
 drivers/net/ppp/pppoe.c                       |   1 +
 drivers/nvme/target/rdma.c                    |  17 ++-
 drivers/s390/char/sclp_config.c               |   2 +
 drivers/staging/rtl8188eu/os_dep/usb_intf.c   |   1 +
 drivers/tty/n_hdlc.c                          |   1 +
 drivers/tty/serial/serial_core.c              |  12 +-
 drivers/tty/tty_io.c                          |   3 +-
 drivers/tty/vt/vt.c                           |   1 +
 drivers/usb/serial/pl2303.c                   |   1 +
 drivers/usb/serial/pl2303.h                   |   2 +
 drivers/usb/serial/usb-serial-simple.c        |   3 +-
 drivers/vhost/net.c                           |   3 +-
 drivers/vhost/vhost.c                         |  97 ++++++++++--
 drivers/vhost/vhost.h                         |   3 +-
 fs/btrfs/dev-replace.c                        |   9 +-
 fs/cifs/connect.c                             |  21 +++
 fs/cifs/smb2ops.c                             |  38 +++--
 fs/f2fs/node.c                                |   4 +-
 include/linux/compiler-clang.h                |  14 ++
 include/linux/compiler-gcc.h                  |   4 +
 include/linux/compiler-intel.h                |   4 +
 include/linux/overflow.h                      | 205 ++++++++++++++++++++++++++
 include/linux/skbuff.h                        |   1 +
 include/net/ip_fib.h                          |   2 +-
 net/bridge/br_forward.c                       |   9 +-
 net/bridge/br_netfilter_ipv6.c                |   1 +
 net/bridge/netfilter/nft_reject_bridge.c      |   1 +
 net/can/bcm.c                                 |  27 ++++
 net/ipv4/fib_frontend.c                       |   4 +-
 net/ipv4/fib_trie.c                           |  14 +-
 net/ipv4/inet_fragment.c                      |   2 +-
 net/ipv4/ip_input.c                           |   1 +
 net/openvswitch/flow_netlink.c                |   2 +-
 net/sched/sch_api.c                           |   3 +-
 sound/soc/codecs/rt5514-spi.c                 |   2 +
 sound/soc/intel/atom/sst-mfld-platform-pcm.c  |   8 +-
 tools/perf/util/unwind-libdw.c                |   4 +-
 tools/testing/selftests/x86/protection_keys.c |  41 ++++--
 56 files changed, 652 insertions(+), 129 deletions(-)

[PATCH 4.9 01/44] net: bridge: Fix ethernet header pointer before check skb forwardable

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yunjian Wang <wangyunjian@huawei.com>

[ Upstream commit 28c1382fa28f2e2d9d0d6f25ae879b5af2ecbd03 ]

The skb header should be set to ethernet header before using
is_skb_forwardable. Because the ethernet header length has been
considered in is_skb_forwardable(including dev->hard_header_len
length).

To reproduce the issue:
1, add 2 ports on linux bridge br using following commands:
$ brctl addbr br
$ brctl addif br eth0
$ brctl addif br eth1
2, the MTU of eth0 and eth1 is 1500
3, send a packet(Data 1480, UDP 8, IP 20, Ethernet 14, VLAN 4)
from eth0 to eth1

So the expect result is packet larger than 1500 cannot pass through
eth0 and eth1. But currently, the packet passes through success, it
means eth1's MTU limit doesn't take effect.

Fixes: f6367b4660dd ("bridge: use is_skb_forwardable in forward path")
Cc: bridge@lists.linux-foundation.org
Cc: Nkolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bridge/br_forward.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

--- a/net/bridge/br_forward.c
+++ b/net/bridge/br_forward.c
@@ -35,10 +35,10 @@ static inline int should_deliver(const s
 
 int br_dev_queue_push_xmit(struct net *net, struct sock *sk, struct sk_buff *skb)
 {
+	skb_push(skb, ETH_HLEN);
 	if (!is_skb_forwardable(skb->dev, skb))
 		goto drop;
 
-	skb_push(skb, ETH_HLEN);
 	br_drop_fake_rtable(skb);
 
 	if (skb->ip_summed == CHECKSUM_PARTIAL &&
@@ -96,12 +96,11 @@ static void __br_forward(const struct ne
 		net = dev_net(indev);
 	} else {
 		if (unlikely(netpoll_tx_running(to->br->dev))) {
-			if (!is_skb_forwardable(skb->dev, skb)) {
+			skb_push(skb, ETH_HLEN);
+			if (!is_skb_forwardable(skb->dev, skb))
 				kfree_skb(skb);
-			} else {
-				skb_push(skb, ETH_HLEN);
+			else
 				br_netpoll_send_skb(to, skb);
-			}
 			return;
 		}
 		br_hook = NF_BR_LOCAL_OUT;

[PATCH 4.9 02/44] net: Fix usage of pskb_trim_rcsum

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ross Lagerwall <ross.lagerwall@citrix.com>

[ Upstream commit 6c57f0458022298e4da1729c67bd33ce41c14e7a ]

In certain cases, pskb_trim_rcsum() may change skb pointers.
Reinitialize header pointers afterwards to avoid potential
use-after-frees. Add a note in the documentation of
pskb_trim_rcsum(). Found by KASAN.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ppp/pppoe.c                  |    1 +
 include/linux/skbuff.h                   |    1 +
 net/bridge/br_netfilter_ipv6.c           |    1 +
 net/bridge/netfilter/nft_reject_bridge.c |    1 +
 net/ipv4/ip_input.c                      |    1 +
 5 files changed, 5 insertions(+)

--- a/drivers/net/ppp/pppoe.c
+++ b/drivers/net/ppp/pppoe.c
@@ -442,6 +442,7 @@ static int pppoe_rcv(struct sk_buff *skb
 	if (pskb_trim_rcsum(skb, len))
 		goto drop;
 
+	ph = pppoe_hdr(skb);
 	pn = pppoe_pernet(dev_net(dev));
 
 	/* Note that get_item does a sock_hold(), so sk_pppox(po)
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2962,6 +2962,7 @@ int pskb_trim_rcsum_slow(struct sk_buff
  *
  *	This is exactly the same as pskb_trim except that it ensures the
  *	checksum of received packets are still valid after the operation.
+ *	It can change skb pointers.
  */
 
 static inline int pskb_trim_rcsum(struct sk_buff *skb, unsigned int len)
--- a/net/bridge/br_netfilter_ipv6.c
+++ b/net/bridge/br_netfilter_ipv6.c
@@ -131,6 +131,7 @@ int br_validate_ipv6(struct net *net, st
 					IPSTATS_MIB_INDISCARDS);
 			goto drop;
 		}
+		hdr = ipv6_hdr(skb);
 	}
 	if (hdr->nexthdr == NEXTHDR_HOP && br_nf_check_hbh_len(skb))
 		goto drop;
--- a/net/bridge/netfilter/nft_reject_bridge.c
+++ b/net/bridge/netfilter/nft_reject_bridge.c
@@ -236,6 +236,7 @@ static bool reject6_br_csum_ok(struct sk
 	    pskb_trim_rcsum(skb, ntohs(ip6h->payload_len) + sizeof(*ip6h)))
 		return false;
 
+	ip6h = ipv6_hdr(skb);
 	thoff = ipv6_skip_exthdr(skb, ((u8*)(ip6h+1) - skb->data), &proto, &fo);
 	if (thoff < 0 || thoff >= skb->len || (fo & htons(~0x7)) != 0)
 		return false;
--- a/net/ipv4/ip_input.c
+++ b/net/ipv4/ip_input.c
@@ -475,6 +475,7 @@ int ip_rcv(struct sk_buff *skb, struct n
 		goto drop;
 	}
 
+	iph = ip_hdr(skb);
 	skb->transport_header = skb->network_header + iph->ihl*4;
 
 	/* Remove any debris in the socket control block */

[PATCH 4.9 03/44] openvswitch: Avoid OOB read when parsing flow nlattrs

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ross Lagerwall <ross.lagerwall@citrix.com>

[ Upstream commit 04a4af334b971814eedf4e4a413343ad3287d9a9 ]

For nested and variable attributes, the expected length of an attribute
is not known and marked by a negative number.  This results in an OOB
read when the expected length is later used to check if the attribute is
all zeros. Fix this by using the actual length of the attribute rather
than the expected length.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/openvswitch/flow_netlink.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/openvswitch/flow_netlink.c
+++ b/net/openvswitch/flow_netlink.c
@@ -409,7 +409,7 @@ static int __parse_flow_nlattrs(const st
 			return -EINVAL;
 		}
 
-		if (!nz || !is_all_zero(nla_data(nla), expected_len)) {
+		if (!nz || !is_all_zero(nla_data(nla), nla_len(nla))) {
 			attrs |= 1 << type;
 			a[type] = nla;
 		}

[PATCH 4.9 04/44] vhost: log dirty page correctly

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jason Wang <jasowang@redhat.com>

[ Upstream commit cc5e710759470bc7f3c61d11fd54586f15fdbdf4 ]

Vhost dirty page logging API is designed to sync through GPA. But we
try to log GIOVA when device IOTLB is enabled. This is wrong and may
lead to missing data after migration.

To solve this issue, when logging with device IOTLB enabled, we will:

1) reuse the device IOTLB translation result of GIOVA->HVA mapping to
   get HVA, for writable descriptor, get HVA through iovec. For used
   ring update, translate its GIOVA to HVA
2) traverse the GPA->HVA mapping to get the possible GPA and log
   through GPA. Pay attention this reverse mapping is not guaranteed
   to be unique, so we should log each possible GPA in this case.

This fix the failure of scp to guest during migration. In -next, we
will probably support passing GIOVA->GPA instead of GIOVA->HVA.

Fixes: 6b1e6cc7855b ("vhost: new device IOTLB API")
Reported-by: Jintack Lim <jintack@cs.columbia.edu>
Cc: Jintack Lim <jintack@cs.columbia.edu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/vhost/net.c   |    3 +
 drivers/vhost/vhost.c |   97 ++++++++++++++++++++++++++++++++++++++++++--------
 drivers/vhost/vhost.h |    3 +
 3 files changed, 87 insertions(+), 16 deletions(-)

--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -751,7 +751,8 @@ static void handle_rx(struct vhost_net *
 		vhost_add_used_and_signal_n(&net->dev, vq, vq->heads,
 					    headcount);
 		if (unlikely(vq_log))
-			vhost_log_write(vq, vq_log, log, vhost_len);
+			vhost_log_write(vq, vq_log, log, vhost_len,
+					vq->iov, in);
 		total_len += vhost_len;
 		if (unlikely(total_len >= VHOST_NET_WEIGHT)) {
 			vhost_poll_queue(&vq->poll);
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -1646,13 +1646,87 @@ static int log_write(void __user *log_ba
 	return r;
 }
 
+static int log_write_hva(struct vhost_virtqueue *vq, u64 hva, u64 len)
+{
+	struct vhost_umem *umem = vq->umem;
+	struct vhost_umem_node *u;
+	u64 start, end, l, min;
+	int r;
+	bool hit = false;
+
+	while (len) {
+		min = len;
+		/* More than one GPAs can be mapped into a single HVA. So
+		 * iterate all possible umems here to be safe.
+		 */
+		list_for_each_entry(u, &umem->umem_list, link) {
+			if (u->userspace_addr > hva - 1 + len ||
+			    u->userspace_addr - 1 + u->size < hva)
+				continue;
+			start = max(u->userspace_addr, hva);
+			end = min(u->userspace_addr - 1 + u->size,
+				  hva - 1 + len);
+			l = end - start + 1;
+			r = log_write(vq->log_base,
+				      u->start + start - u->userspace_addr,
+				      l);
+			if (r < 0)
+				return r;
+			hit = true;
+			min = min(l, min);
+		}
+
+		if (!hit)
+			return -EFAULT;
+
+		len -= min;
+		hva += min;
+	}
+
+	return 0;
+}
+
+static int log_used(struct vhost_virtqueue *vq, u64 used_offset, u64 len)
+{
+	struct iovec iov[64];
+	int i, ret;
+
+	if (!vq->iotlb)
+		return log_write(vq->log_base, vq->log_addr + used_offset, len);
+
+	ret = translate_desc(vq, (uintptr_t)vq->used + used_offset,
+			     len, iov, 64, VHOST_ACCESS_WO);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < ret; i++) {
+		ret = log_write_hva(vq,	(uintptr_t)iov[i].iov_base,
+				    iov[i].iov_len);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
 int vhost_log_write(struct vhost_virtqueue *vq, struct vhost_log *log,
-		    unsigned int log_num, u64 len)
+		    unsigned int log_num, u64 len, struct iovec *iov, int count)
 {
 	int i, r;
 
 	/* Make sure data written is seen before log. */
 	smp_wmb();
+
+	if (vq->iotlb) {
+		for (i = 0; i < count; i++) {
+			r = log_write_hva(vq, (uintptr_t)iov[i].iov_base,
+					  iov[i].iov_len);
+			if (r < 0)
+				return r;
+		}
+		return 0;
+	}
+
 	for (i = 0; i < log_num; ++i) {
 		u64 l = min(log[i].len, len);
 		r = log_write(vq->log_base, log[i].addr, l);
@@ -1682,9 +1756,8 @@ static int vhost_update_used_flags(struc
 		smp_wmb();
 		/* Log used flag write. */
 		used = &vq->used->flags;
-		log_write(vq->log_base, vq->log_addr +
-			  (used - (void __user *)vq->used),
-			  sizeof vq->used->flags);
+		log_used(vq, (used - (void __user *)vq->used),
+			 sizeof vq->used->flags);
 		if (vq->log_ctx)
 			eventfd_signal(vq->log_ctx, 1);
 	}
@@ -1702,9 +1775,8 @@ static int vhost_update_avail_event(stru
 		smp_wmb();
 		/* Log avail event write */
 		used = vhost_avail_event(vq);
-		log_write(vq->log_base, vq->log_addr +
-			  (used - (void __user *)vq->used),
-			  sizeof *vhost_avail_event(vq));
+		log_used(vq, (used - (void __user *)vq->used),
+			 sizeof *vhost_avail_event(vq));
 		if (vq->log_ctx)
 			eventfd_signal(vq->log_ctx, 1);
 	}
@@ -2103,10 +2175,8 @@ static int __vhost_add_used_n(struct vho
 		/* Make sure data is seen before log. */
 		smp_wmb();
 		/* Log used ring entry write. */
-		log_write(vq->log_base,
-			  vq->log_addr +
-			   ((void __user *)used - (void __user *)vq->used),
-			  count * sizeof *used);
+		log_used(vq, ((void __user *)used - (void __user *)vq->used),
+			 count * sizeof *used);
 	}
 	old = vq->last_used_idx;
 	new = (vq->last_used_idx += count);
@@ -2148,9 +2218,8 @@ int vhost_add_used_n(struct vhost_virtqu
 		/* Make sure used idx is seen before log. */
 		smp_wmb();
 		/* Log used index update. */
-		log_write(vq->log_base,
-			  vq->log_addr + offsetof(struct vring_used, idx),
-			  sizeof vq->used->idx);
+		log_used(vq, offsetof(struct vring_used, idx),
+			 sizeof vq->used->idx);
 		if (vq->log_ctx)
 			eventfd_signal(vq->log_ctx, 1);
 	}
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -199,7 +199,8 @@ bool vhost_vq_avail_empty(struct vhost_d
 bool vhost_enable_notify(struct vhost_dev *, struct vhost_virtqueue *);
 
 int vhost_log_write(struct vhost_virtqueue *vq, struct vhost_log *log,
-		    unsigned int log_num, u64 len);
+		    unsigned int log_num, u64 len,
+		    struct iovec *iov, int count);
 int vq_iotlb_prefetch(struct vhost_virtqueue *vq);
 
 struct vhost_msg_node *vhost_new_msg(struct vhost_virtqueue *vq, int type);

[PATCH 4.9 05/44] net: ipv4: Fix memory leak in network namespace dismantle

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ido Schimmel <idosch@mellanox.com>

[ Upstream commit f97f4dd8b3bb9d0993d2491e0f22024c68109184 ]

IPv4 routing tables are flushed in two cases:

1. In response to events in the netdev and inetaddr notification chains
2. When a network namespace is being dismantled

In both cases only routes associated with a dead nexthop group are
flushed. However, a nexthop group will only be marked as dead in case it
is populated with actual nexthops using a nexthop device. This is not
the case when the route in question is an error route (e.g.,
'blackhole', 'unreachable').

Therefore, when a network namespace is being dismantled such routes are
not flushed and leaked [1].

To reproduce:
# ip netns add blue
# ip -n blue route add unreachable 192.0.2.0/24
# ip netns del blue

Fix this by not skipping error routes that are not marked with
RTNH_F_DEAD when flushing the routing tables.

To prevent the flushing of such routes in case #1, add a parameter to
fib_table_flush() that indicates if the table is flushed as part of
namespace dismantle or not.

Note that this problem does not exist in IPv6 since error routes are
associated with the loopback device.

[1]
unreferenced object 0xffff888066650338 (size 56):
  comm "ip", pid 1206, jiffies 4294786063 (age 26.235s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 b0 1c 62 61 80 88 ff ff  ..........ba....
    e8 8b a1 64 80 88 ff ff 00 07 00 08 fe 00 00 00  ...d............
  backtrace:
    [<00000000856ed27d>] inet_rtm_newroute+0x129/0x220
    [<00000000fcdfc00a>] rtnetlink_rcv_msg+0x397/0xa20
    [<00000000cb85801a>] netlink_rcv_skb+0x132/0x380
    [<00000000ebc991d2>] netlink_unicast+0x4c0/0x690
    [<0000000014f62875>] netlink_sendmsg+0x929/0xe10
    [<00000000bac9d967>] sock_sendmsg+0xc8/0x110
    [<00000000223e6485>] ___sys_sendmsg+0x77a/0x8f0
    [<000000002e94f880>] __sys_sendmsg+0xf7/0x250
    [<00000000ccb1fa72>] do_syscall_64+0x14d/0x610
    [<00000000ffbe3dae>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
    [<000000003a8b605b>] 0xffffffffffffffff
unreferenced object 0xffff888061621c88 (size 48):
  comm "ip", pid 1206, jiffies 4294786063 (age 26.235s)
  hex dump (first 32 bytes):
    6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
    6b 6b 6b 6b 6b 6b 6b 6b d8 8e 26 5f 80 88 ff ff  kkkkkkkk..&_....
  backtrace:
    [<00000000733609e3>] fib_table_insert+0x978/0x1500
    [<00000000856ed27d>] inet_rtm_newroute+0x129/0x220
    [<00000000fcdfc00a>] rtnetlink_rcv_msg+0x397/0xa20
    [<00000000cb85801a>] netlink_rcv_skb+0x132/0x380
    [<00000000ebc991d2>] netlink_unicast+0x4c0/0x690
    [<0000000014f62875>] netlink_sendmsg+0x929/0xe10
    [<00000000bac9d967>] sock_sendmsg+0xc8/0x110
    [<00000000223e6485>] ___sys_sendmsg+0x77a/0x8f0
    [<000000002e94f880>] __sys_sendmsg+0xf7/0x250
    [<00000000ccb1fa72>] do_syscall_64+0x14d/0x610
    [<00000000ffbe3dae>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
    [<000000003a8b605b>] 0xffffffffffffffff

Fixes: 8cced9eff1d4 ("[NETNS]: Enable routing configuration in non-initial namespace.")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/ip_fib.h    |    2 +-
 net/ipv4/fib_frontend.c |    4 ++--
 net/ipv4/fib_trie.c     |   14 ++++++++++++--
 3 files changed, 15 insertions(+), 5 deletions(-)

--- a/include/net/ip_fib.h
+++ b/include/net/ip_fib.h
@@ -242,7 +242,7 @@ int fib_table_insert(struct net *, struc
 int fib_table_delete(struct net *, struct fib_table *, struct fib_config *);
 int fib_table_dump(struct fib_table *table, struct sk_buff *skb,
 		   struct netlink_callback *cb);
-int fib_table_flush(struct net *net, struct fib_table *table);
+int fib_table_flush(struct net *net, struct fib_table *table, bool flush_all);
 struct fib_table *fib_trie_unmerge(struct fib_table *main_tb);
 void fib_table_flush_external(struct fib_table *table);
 void fib_free_table(struct fib_table *tb);
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -193,7 +193,7 @@ static void fib_flush(struct net *net)
 		struct fib_table *tb;
 
 		hlist_for_each_entry_safe(tb, tmp, head, tb_hlist)
-			flushed += fib_table_flush(net, tb);
+			flushed += fib_table_flush(net, tb, false);
 	}
 
 	if (flushed)
@@ -1277,7 +1277,7 @@ static void ip_fib_net_exit(struct net *
 
 		hlist_for_each_entry_safe(tb, tmp, head, tb_hlist) {
 			hlist_del(&tb->tb_hlist);
-			fib_table_flush(net, tb);
+			fib_table_flush(net, tb, true);
 			fib_free_table(tb);
 		}
 	}
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -1826,7 +1826,7 @@ void fib_table_flush_external(struct fib
 }
 
 /* Caller must hold RTNL. */
-int fib_table_flush(struct net *net, struct fib_table *tb)
+int fib_table_flush(struct net *net, struct fib_table *tb, bool flush_all)
 {
 	struct trie *t = (struct trie *)tb->tb_data;
 	struct key_vector *pn = t->kv;
@@ -1874,7 +1874,17 @@ int fib_table_flush(struct net *net, str
 		hlist_for_each_entry_safe(fa, tmp, &n->leaf, fa_list) {
 			struct fib_info *fi = fa->fa_info;
 
-			if (!fi || !(fi->fib_flags & RTNH_F_DEAD)) {
+			if (!fi ||
+			    (!(fi->fib_flags & RTNH_F_DEAD) &&
+			     !fib_props[fa->fa_type].error)) {
+				slen = fa->fa_slen;
+				continue;
+			}
+
+			/* Do not flush error routes if network namespace is
+			 * not being dismantled
+			 */
+			if (!flush_all && fib_props[fa->fa_type].error) {
 				slen = fa->fa_slen;
 				continue;
 			}

[PATCH 4.9 06/44] net_sched: refetch skb protocol for each filter

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cong Wang <xiyou.wangcong@gmail.com>

[ Upstream commit cd0c4e70fc0ccfa705cdf55efb27519ce9337a26 ]

Martin reported a set of filters don't work after changing
from reclassify to continue. Looking into the code, it
looks like skb protocol is not always fetched for each
iteration of the filters. But, as demonstrated by Martin,
TC actions could modify skb->protocol, for example act_vlan,
this means we have to refetch skb protocol in each iteration,
rather than using the one we fetch in the beginning of the loop.

This bug is _not_ introduced by commit 3b3ae880266d
("net: sched: consolidate tc_classify{,_compat}"), technically,
if act_vlan is the only action that modifies skb protocol, then
it is commit c7e2b9689ef8 ("sched: introduce vlan action") which
introduced this bug.

Reported-by: Martin Olsson <martin.olsson+netdev@sentorsecurity.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_api.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -1850,7 +1850,6 @@ done:
 int tc_classify(struct sk_buff *skb, const struct tcf_proto *tp,
 		struct tcf_result *res, bool compat_mode)
 {
-	__be16 protocol = tc_skb_protocol(skb);
 #ifdef CONFIG_NET_CLS_ACT
 	const struct tcf_proto *old_tp = tp;
 	int limit = 0;
@@ -1858,6 +1857,7 @@ int tc_classify(struct sk_buff *skb, con
 reclassify:
 #endif
 	for (; tp; tp = rcu_dereference_bh(tp->next)) {
+		__be16 protocol = tc_skb_protocol(skb);
 		int err;
 
 		if (tp->protocol != protocol &&
@@ -1884,7 +1884,6 @@ reset:
 	}
 
 	tp = old_tp;
-	protocol = tc_skb_protocol(skb);
 	goto reclassify;
 #endif
 }

[PATCH 4.9 07/44] ipfrag: really prevent allocation on netns exit

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit f6f2a4a2eb92bc73671204198bb2f8ab53ff59fb ]

Setting the low threshold to 0 has no effect on frags allocation,
we need to clear high_thresh instead.

The code was pre-existent to commit 648700f76b03 ("inet: frags:
use rhashtables for reassembly units"), but before the above,
such assignment had a different role: prevent concurrent eviction
from the worker and the netns cleanup helper.

Fixes: 648700f76b03 ("inet: frags: use rhashtables for reassembly units")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/inet_fragment.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/inet_fragment.c
+++ b/net/ipv4/inet_fragment.c
@@ -90,7 +90,7 @@ static void inet_frags_free_cb(void *ptr
 
 void inet_frags_exit_net(struct netns_frags *nf)
 {
-	nf->low_thresh = 0; /* prevent creation of new frags */
+	nf->high_thresh = 0; /* prevent creation of new frags */
 
 	rhashtable_free_and_destroy(&nf->rhashtable, inet_frags_free_cb, NULL);
 }

[PATCH 4.9 08/44] mmc: Kconfig: Enable CONFIG_MMC_SDHCI_IO_ACCESSORS

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

commit 99d570da309813f67e9c741edeff55bafc6c1d5e upstream.

Enable CONFIG_MMC_SDHCI_IO_ACCESSORS so that SDHC controller specific
register read and write APIs, if registered, can be used.

Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Koen Vandeputte <koen.vandeputte@ncentric.com>
Cc: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -399,6 +399,7 @@ config MMC_SDHCI_MSM
 	tristate "Qualcomm SDHCI Controller Support"
 	depends on ARCH_QCOM || (ARM && COMPILE_TEST)
 	depends on MMC_SDHCI_PLTFM
+	select MMC_SDHCI_IO_ACCESSORS
 	help
 	  This selects the Secure Digital Host Controller Interface (SDHCI)
 	  support present in Qualcomm SOCs. The controller supports

[PATCH 4.9 09/44] USB: serial: simple: add Motorola Tetra TPG2200 device id

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Max Schulze <max.schulze@posteo.de>

commit b81c2c33eab79dfd3650293b2227ee5c6036585c upstream.

Add new Motorola Tetra device id for Motorola Solutions TETRA PEI device

T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0cad ProdID=9016 Rev=24.16
S:  Manufacturer=Motorola Solutions, Inc.
S:  Product=TETRA PEI interface
C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=usb_serial_simple
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=usb_serial_simple

Signed-off-by: Max Schulze <max.schulze@posteo.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/usb-serial-simple.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/serial/usb-serial-simple.c
+++ b/drivers/usb/serial/usb-serial-simple.c
@@ -88,7 +88,8 @@ DEVICE(moto_modem, MOTO_IDS);
 /* Motorola Tetra driver */
 #define MOTOROLA_TETRA_IDS()			\
 	{ USB_DEVICE(0x0cad, 0x9011) },	/* Motorola Solutions TETRA PEI */ \
-	{ USB_DEVICE(0x0cad, 0x9012) }	/* MTP6550 */
+	{ USB_DEVICE(0x0cad, 0x9012) },	/* MTP6550 */ \
+	{ USB_DEVICE(0x0cad, 0x9016) }	/* TPG2200 */
 DEVICE(motorola_tetra, MOTOROLA_TETRA_IDS);
 
 /* Novatel Wireless GPS driver */

[PATCH 4.9 10/44] USB: serial: pl2303: add new PID to support PL2303TB

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Charles Yeh <charlesyeh522@gmail.com>

commit 4dcf9ddc9ad5ab649abafa98c5a4d54b1a33dabb upstream.

Add new PID to support PL2303TB (TYPE_HX)

Signed-off-by: Charles Yeh <charlesyeh522@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/pl2303.c |    1 +
 drivers/usb/serial/pl2303.h |    2 ++
 2 files changed, 3 insertions(+)

--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -47,6 +47,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ZTEK) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_TB) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
 	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -13,6 +13,7 @@
 
 #define PL2303_VENDOR_ID	0x067b
 #define PL2303_PRODUCT_ID	0x2303
+#define PL2303_PRODUCT_ID_TB		0x2304
 #define PL2303_PRODUCT_ID_RSAQ2		0x04bb
 #define PL2303_PRODUCT_ID_DCU11		0x1234
 #define PL2303_PRODUCT_ID_PHAROS	0xaaa0
@@ -25,6 +26,7 @@
 #define PL2303_PRODUCT_ID_MOTOROLA	0x0307
 #define PL2303_PRODUCT_ID_ZTEK		0xe1f1
 
+
 #define ATEN_VENDOR_ID		0x0557
 #define ATEN_VENDOR_ID2		0x0547
 #define ATEN_PRODUCT_ID		0x2008

[PATCH 4.9 11/44] ASoC: atom: fix a missing check of snd_pcm_lib_malloc_pages

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kangjie Lu <kjlu@umn.edu>

commit 44fabd8cdaaa3acb80ad2bb3b5c61ae2136af661 upstream.

snd_pcm_lib_malloc_pages() may fail, so let's check its status and
return its error code upstream.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/intel/atom/sst-mfld-platform-pcm.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/sound/soc/intel/atom/sst-mfld-platform-pcm.c
+++ b/sound/soc/intel/atom/sst-mfld-platform-pcm.c
@@ -399,7 +399,13 @@ static int sst_media_hw_params(struct sn
 				struct snd_pcm_hw_params *params,
 				struct snd_soc_dai *dai)
 {
-	snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
+	int ret;
+
+	ret =
+		snd_pcm_lib_malloc_pages(substream,
+				params_buffer_bytes(params));
+	if (ret)
+		return ret;
 	memset(substream->runtime->dma_area, 0, params_buffer_bytes(params));
 	return 0;
 }

[PATCH 4.9 12/44] ASoC: rt5514-spi: Fix potential NULL pointer dereference

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gustavo A. R. Silva <gustavo@embeddedor.com>

commit 060d0bf491874daece47053c4e1fb0489eb867d2 upstream.

There is a potential NULL pointer dereference in case devm_kzalloc()
fails and returns NULL.

Fix this by adding a NULL check on rt5514_dsp.

This issue was detected with the help of Coccinelle.

Fixes: 6eebf35b0e4a ("ASoC: rt5514: add rt5514 SPI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/codecs/rt5514-spi.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/soc/codecs/rt5514-spi.c
+++ b/sound/soc/codecs/rt5514-spi.c
@@ -253,6 +253,8 @@ static int rt5514_spi_pcm_probe(struct s
 
 	rt5514_dsp = devm_kzalloc(platform->dev, sizeof(*rt5514_dsp),
 			GFP_KERNEL);
+	if (!rt5514_dsp)
+		return -ENOMEM;
 
 	rt5514_dsp->dev = &rt5514_spi->dev;
 	mutex_init(&rt5514_dsp->dma_lock);

[PATCH 4.9 13/44] ARCv2: lib: memeset: fix doing prefetchw outside of buffer

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>

commit e6a72b7daeeb521753803550f0ed711152bb2555 upstream.

ARCv2 optimized memset uses PREFETCHW instruction for prefetching the
next cache line but doesn't ensure that the line is not past the end of
the buffer. PRETECHW changes the line ownership and marks it dirty,
which can cause issues in SMP config when next line was already owned by
other core. Fix the issue by avoiding the PREFETCHW

Some more details:

The current code has 3 logical loops (ignroing the unaligned part)
  (a) Big loop for doing aligned 64 bytes per iteration with PREALLOC
  (b) Loop for 32 x 2 bytes with PREFETCHW
  (c) any left over bytes

loop (a) was already eliding the last 64 bytes, so PREALLOC was
safe. The fix was removing PREFETCW from (b).

Another potential issue (applicable to configs with 32 or 128 byte L1
cache line) is that PREALLOC assumes 64 byte cache line and may not do
the right thing specially for 32b. While it would be easy to adapt,
there are no known configs with those lie sizes, so for now, just
compile out PREALLOC in such cases.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: stable@vger.kernel.org #4.4+
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[vgupta: rewrote changelog, used asm .macro vs. "C" macro]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arc/lib/memset-archs.S |   40 ++++++++++++++++++++++++++++++++--------
 1 file changed, 32 insertions(+), 8 deletions(-)

--- a/arch/arc/lib/memset-archs.S
+++ b/arch/arc/lib/memset-archs.S
@@ -7,11 +7,39 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/cache.h>
 
-#undef PREALLOC_NOT_AVAIL
+/*
+ * The memset implementation below is optimized to use prefetchw and prealloc
+ * instruction in case of CPU with 64B L1 data cache line (L1_CACHE_SHIFT == 6)
+ * If you want to implement optimized memset for other possible L1 data cache
+ * line lengths (32B and 128B) you should rewrite code carefully checking
+ * we don't call any prefetchw/prealloc instruction for L1 cache lines which
+ * don't belongs to memset area.
+ */
+
+#if L1_CACHE_SHIFT == 6
+
+.macro PREALLOC_INSTR	reg, off
+	prealloc	[\reg, \off]
+.endm
+
+.macro PREFETCHW_INSTR	reg, off
+	prefetchw	[\reg, \off]
+.endm
+
+#else
+
+.macro PREALLOC_INSTR
+.endm
+
+.macro PREFETCHW_INSTR
+.endm
+
+#endif
 
 ENTRY_CFI(memset)
-	prefetchw [r0]		; Prefetch the write location
+	PREFETCHW_INSTR	r0, 0	; Prefetch the first write location
 	mov.f	0, r2
 ;;; if size is zero
 	jz.d	[blink]
@@ -48,11 +76,8 @@ ENTRY_CFI(memset)
 
 	lpnz	@.Lset64bytes
 	;; LOOP START
-#ifdef PREALLOC_NOT_AVAIL
-	prefetchw [r3, 64]	;Prefetch the next write location
-#else
-	prealloc  [r3, 64]
-#endif
+	PREALLOC_INSTR	r3, 64	; alloc next line w/o fetching
+
 #ifdef CONFIG_ARC_HAS_LL64
 	std.ab	r4, [r3, 8]
 	std.ab	r4, [r3, 8]
@@ -85,7 +110,6 @@ ENTRY_CFI(memset)
 	lsr.f	lp_count, r2, 5 ;Last remaining  max 124 bytes
 	lpnz	.Lset32bytes
 	;; LOOP START
-	prefetchw   [r3, 32]	;Prefetch the next write location
 #ifdef CONFIG_ARC_HAS_LL64
 	std.ab	r4, [r3, 8]
 	std.ab	r4, [r3, 8]

[PATCH 4.9 14/44] ARC: perf: map generic branches to correct hardware condition

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>

commit 3affbf0e154ee351add6fcc254c59c3f3947fa8f upstream.

So far we've mapped branches to "ijmp" which also counts conditional
branches NOT taken. This makes us different from other architectures
such as ARM which seem to be counting only taken branches.

So use "ijmptak" hardware condition which only counts (all jump
instructions that are taken)

'ijmptak' event is available on both ARCompact and ARCv2 ISA based
cores.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[vgupta: reworked changelog]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arc/include/asm/perf_event.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/arc/include/asm/perf_event.h
+++ b/arch/arc/include/asm/perf_event.h
@@ -103,7 +103,8 @@ static const char * const arc_pmu_ev_hw_
 
 	/* counts condition */
 	[PERF_COUNT_HW_INSTRUCTIONS] = "iall",
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmp", /* Excludes ZOL jumps */
+	/* All jump instructions that are taken */
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmptak",
 	[PERF_COUNT_ARC_BPOK]         = "bpok",	  /* NP-NT, PT-T, PNT-NT */
 #ifdef CONFIG_ISA_ARCV2
 	[PERF_COUNT_HW_BRANCH_MISSES] = "bpmp",

[PATCH 4.9 15/44] s390/early: improve machine detection

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christian Borntraeger <borntraeger@de.ibm.com>

commit 03aa047ef2db4985e444af6ee1c1dd084ad9fb4c upstream.

Right now the early machine detection code check stsi 3.2.2 for "KVM"
and set MACHINE_IS_VM if this is different. As the console detection
uses diagnose 8 if MACHINE_IS_VM returns true this will crash Linux
early for any non z/VM system that sets a different value than KVM.
So instead of assuming z/VM, do not set any of MACHINE_IS_LPAR,
MACHINE_IS_VM, or MACHINE_IS_KVM.

CC: stable@vger.kernel.org
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/kernel/early.c |    4 ++--
 arch/s390/kernel/setup.c |    2 ++
 2 files changed, 4 insertions(+), 2 deletions(-)

--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -224,10 +224,10 @@ static noinline __init void detect_machi
 	if (stsi(vmms, 3, 2, 2) || !vmms->count)
 		return;
 
-	/* Running under KVM? If not we assume z/VM */
+	/* Detect known hypervisors */
 	if (!memcmp(vmms->vm[0].cpi, "\xd2\xe5\xd4", 3))
 		S390_lowcore.machine_flags |= MACHINE_FLAG_KVM;
-	else
+	else if (!memcmp(vmms->vm[0].cpi, "\xa9\x61\xe5\xd4", 4))
 		S390_lowcore.machine_flags |= MACHINE_FLAG_VM;
 }
 
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -863,6 +863,8 @@ void __init setup_arch(char **cmdline_p)
 		pr_info("Linux is running under KVM in 64-bit mode\n");
 	else if (MACHINE_IS_LPAR)
 		pr_info("Linux is running natively in 64-bit mode\n");
+	else
+		pr_info("Linux is running as a guest in 64-bit mode\n");
 
 	/* Have one command line that is parsed and saved in /proc/cmdline */
 	/* boot_command_line has been already set up in early.c */

[PATCH 4.9 16/44] s390/smp: fix CPU hotplug deadlock with CPU rescan

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gerald Schaefer <gerald.schaefer@de.ibm.com>

commit b7cb707c373094ce4008d4a6ac9b6b366ec52da5 upstream.

smp_rescan_cpus() is called without the device_hotplug_lock, which can lead
to a dedlock when a new CPU is found and immediately set online by a udev
rule.

This was observed on an older kernel version, where the cpu_hotplug_begin()
loop was still present, and it resulted in hanging chcpu and systemd-udev
processes. This specific deadlock will not show on current kernels. However,
there may be other possible deadlocks, and since smp_rescan_cpus() can still
trigger a CPU hotplug operation, the device_hotplug_lock should be held.

For reference, this was the deadlock with the old cpu_hotplug_begin() loop:

        chcpu (rescan)                       systemd-udevd

 echo 1 > /sys/../rescan
 -> smp_rescan_cpus()
 -> (*) get_online_cpus()
    (increases refcount)
 -> smp_add_present_cpu()
    (new CPU found)
 -> register_cpu()
 -> device_add()
 -> udev "add" event triggered -----------> udev rule sets CPU online
                                         -> echo 1 > /sys/.../online
                                         -> lock_device_hotplug_sysfs()
                                            (this is missing in rescan path)
                                         -> device_online()
                                         -> (**) device_lock(new CPU dev)
                                         -> cpu_up()
                                         -> cpu_hotplug_begin()
                                            (loops until refcount == 0)
                                            -> deadlock with (*)
 -> bus_probe_device()
 -> device_attach()
 -> device_lock(new CPU dev)
    -> deadlock with (**)

Fix this by taking the device_hotplug_lock in the CPU rescan path.

Cc: <stable@vger.kernel.org>
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/kernel/smp.c          |    4 ++++
 drivers/s390/char/sclp_config.c |    2 ++
 2 files changed, 6 insertions(+)

--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -1139,7 +1139,11 @@ static ssize_t __ref rescan_store(struct
 {
 	int rc;
 
+	rc = lock_device_hotplug_sysfs();
+	if (rc)
+		return rc;
 	rc = smp_rescan_cpus();
+	unlock_device_hotplug();
 	return rc ? rc : count;
 }
 static DEVICE_ATTR(rescan, 0200, NULL, rescan_store);
--- a/drivers/s390/char/sclp_config.c
+++ b/drivers/s390/char/sclp_config.c
@@ -59,7 +59,9 @@ static void sclp_cpu_capability_notify(s
 
 static void __ref sclp_cpu_change_notify(struct work_struct *work)
 {
+	lock_device_hotplug();
 	smp_rescan_cpus();
+	unlock_device_hotplug();
 }
 
 static void sclp_conf_receiver_fn(struct evbuf_header *evbuf)

[PATCH 4.9 17/44] char/mwave: fix potential Spectre v1 vulnerability

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gustavo A. R. Silva <gustavo@embeddedor.com>

commit 701956d4018e5d5438570e39e8bda47edd32c489 upstream.

ipcnum is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/char/mwave/mwavedd.c:299 mwave_ioctl() warn: potential spectre issue 'pDrvData->IPCs' [w] (local cap)

Fix this by sanitizing ipcnum before using it to index pDrvData->IPCs.

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/mwave/mwavedd.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/char/mwave/mwavedd.c
+++ b/drivers/char/mwave/mwavedd.c
@@ -59,6 +59,7 @@
 #include <linux/mutex.h>
 #include <linux/delay.h>
 #include <linux/serial_8250.h>
+#include <linux/nospec.h>
 #include "smapi.h"
 #include "mwavedd.h"
 #include "3780i.h"
@@ -289,6 +290,8 @@ static long mwave_ioctl(struct file *fil
 						ipcnum);
 				return -EINVAL;
 			}
+			ipcnum = array_index_nospec(ipcnum,
+						    ARRAY_SIZE(pDrvData->IPCs));
 			PRINTK_3(TRACE_MWAVE,
 				"mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC"
 				" ipcnum %x entry usIntCount %x\n",
@@ -317,6 +320,8 @@ static long mwave_ioctl(struct file *fil
 						" Invalid ipcnum %x\n", ipcnum);
 				return -EINVAL;
 			}
+			ipcnum = array_index_nospec(ipcnum,
+						    ARRAY_SIZE(pDrvData->IPCs));
 			PRINTK_3(TRACE_MWAVE,
 				"mwavedd::mwave_ioctl IOCTL_MW_GET_IPC"
 				" ipcnum %x, usIntCount %x\n",
@@ -383,6 +388,8 @@ static long mwave_ioctl(struct file *fil
 						ipcnum);
 				return -EINVAL;
 			}
+			ipcnum = array_index_nospec(ipcnum,
+						    ARRAY_SIZE(pDrvData->IPCs));
 			mutex_lock(&mwave_mutex);
 			if (pDrvData->IPCs[ipcnum].bIsEnabled == true) {
 				pDrvData->IPCs[ipcnum].bIsEnabled = false;

[PATCH 4.9 18/44] staging: rtl8188eu: Add device code for D-Link DWA-121 rev B1

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Straube <straube.linux@gmail.com>

commit 5f74a8cbb38d10615ed46bc3e37d9a4c9af8045a upstream.

This device was added to the stand-alone driver on github.
Add it to the staging driver as well.

Link: https://github.com/lwfinger/rtl8188eu/commit/a0619a07cd1e
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/rtl8188eu/os_dep/usb_intf.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c
+++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
@@ -43,6 +43,7 @@ static struct usb_device_id rtw_usb_id_t
 	{USB_DEVICE(0x2001, 0x330F)}, /* DLink DWA-125 REV D1 */
 	{USB_DEVICE(0x2001, 0x3310)}, /* Dlink DWA-123 REV D1 */
 	{USB_DEVICE(0x2001, 0x3311)}, /* DLink GO-USB-N150 REV B1 */
+	{USB_DEVICE(0x2001, 0x331B)}, /* D-Link DWA-121 rev B1 */
 	{USB_DEVICE(0x2357, 0x010c)}, /* TP-Link TL-WN722N v2 */
 	{USB_DEVICE(0x0df6, 0x0076)}, /* Sitecom N150 v2 */
 	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0xffef)}, /* Rosewill RNX-N150NUB */

[PATCH 4.9 19/44] tty: Handle problem if line discipline does not have receive_buf

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 27cfb3a53be46a54ec5e0bd04e51995b74c90343 upstream.

Some tty line disciplines do not have a receive buf callback, so
properly check for that before calling it.  If they do not have this
callback, just eat the character quietly, as we can't fail this call.

Reported-by: Jann Horn <jannh@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/tty_io.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2324,7 +2324,8 @@ static int tiocsti(struct tty_struct *tt
 	ld = tty_ldisc_ref_wait(tty);
 	if (!ld)
 		return -EIO;
-	ld->ops->receive_buf(tty, &ch, &mbz, 1);
+	if (ld->ops->receive_buf)
+		ld->ops->receive_buf(tty, &ch, &mbz, 1);
 	tty_ldisc_deref(ld);
 	return 0;
 }

[PATCH 4.9 20/44] uart: Fix crash in uart_write and uart_put_char

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Samir Virmani <samir@embedur.com>

commit aff9cf5955185d1f183227e46c5f8673fa483813 upstream.

We were experiencing a crash similar to the one reported as part of
commit:a5ba1d95e46e ("uart: fix race between uart_put_char() and
uart_shutdown()") in our testbed as well. We continue to observe the same
crash after integrating the commit a5ba1d95e46e ("uart: fix race between
uart_put_char() and uart_shutdown()")

On reviewing the change, the port lock should be taken prior to checking for
if (!circ->buf) in fn. __uart_put_char and other fns. that update the buffer
uart_state->xmit.

Traceback:

[11/27/2018 06:24:32.4870] Unable to handle kernel NULL pointer dereference
                           at virtual address 0000003b

[11/27/2018 06:24:32.4950] PC is at memcpy+0x48/0x180
[11/27/2018 06:24:32.4950] LR is at uart_write+0x74/0x120
[11/27/2018 06:24:32.4950] pc : [<ffffffc0002e6808>]
                           lr : [<ffffffc0003747cc>] pstate: 000001c5
[11/27/2018 06:24:32.4950] sp : ffffffc076433d30
[11/27/2018 06:24:32.4950] x29: ffffffc076433d30 x28: 0000000000000140
[11/27/2018 06:24:32.4950] x27: ffffffc0009b9d5e x26: ffffffc07ce36580
[11/27/2018 06:24:32.4950] x25: 0000000000000000 x24: 0000000000000140
[11/27/2018 06:24:32.4950] x23: ffffffc000891200 x22: ffffffc01fc34000
[11/27/2018 06:24:32.4950] x21: 0000000000000fff x20: 0000000000000076
[11/27/2018 06:24:32.4950] x19: 0000000000000076 x18: 0000000000000000
[11/27/2018 06:24:32.4950] x17: 000000000047cf08 x16: ffffffc000099e68
[11/27/2018 06:24:32.4950] x15: 0000000000000018 x14: 776d726966205948
[11/27/2018 06:24:32.4950] x13: 50203a6c6974755f x12: 74647075205d3333
[11/27/2018 06:24:32.4950] x11: 3a35323a36203831 x10: 30322f37322f3131
[11/27/2018 06:24:32.4950] x9 : 5b205d303638342e x8 : 746164206f742070
[11/27/2018 06:24:32.4950] x7 : 7520736920657261 x6 : 000000000000003b
[11/27/2018 06:24:32.4950] x5 : 000000000000817a x4 : 0000000000000008
[11/27/2018 06:24:32.4950] x3 : 2f37322f31312a5b x2 : 000000000000006e
[11/27/2018 06:24:32.4950] x1 : ffffffc0009b9cf0 x0 : 000000000000003b

[11/27/2018 06:24:32.4950] CPU2: stopping
[11/27/2018 06:24:32.4950] CPU: 2 PID: 0 Comm: swapper/2 Tainted: P      D    O    4.1.51 #3
[11/27/2018 06:24:32.4950] Hardware name: Broadcom-v8A (DT)
[11/27/2018 06:24:32.4950] Call trace:
[11/27/2018 06:24:32.4950] [<ffffffc0000883b8>] dump_backtrace+0x0/0x150
[11/27/2018 06:24:32.4950] [<ffffffc00008851c>] show_stack+0x14/0x20
[11/27/2018 06:24:32.4950] [<ffffffc0005ee810>] dump_stack+0x90/0xb0
[11/27/2018 06:24:32.4950] [<ffffffc00008e844>] handle_IPI+0x18c/0x1a0
[11/27/2018 06:24:32.4950] [<ffffffc000080c68>] gic_handle_irq+0x88/0x90

Fixes: a5ba1d95e46e ("uart: fix race between uart_put_char() and uart_shutdown()")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Samir Virmani <samir@embedur.com>
Acked-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/serial_core.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -540,10 +540,12 @@ static int uart_put_char(struct tty_stru
 	int ret = 0;
 
 	circ = &state->xmit;
-	if (!circ->buf)
+	port = uart_port_lock(state, flags);
+	if (!circ->buf) {
+		uart_port_unlock(port, flags);
 		return 0;
+	}
 
-	port = uart_port_lock(state, flags);
 	if (port && uart_circ_chars_free(circ) != 0) {
 		circ->buf[circ->head] = c;
 		circ->head = (circ->head + 1) & (UART_XMIT_SIZE - 1);
@@ -576,11 +578,13 @@ static int uart_write(struct tty_struct
 		return -EL3HLT;
 	}
 
+	port = uart_port_lock(state, flags);
 	circ = &state->xmit;
-	if (!circ->buf)
+	if (!circ->buf) {
+		uart_port_unlock(port, flags);
 		return 0;
+	}
 
-	port = uart_port_lock(state, flags);
 	while (port) {
 		c = CIRC_SPACE_TO_END(circ->head, circ->tail, UART_XMIT_SIZE);
 		if (count < c)

[PATCH 4.9 21/44] tty/n_hdlc: fix __might_sleep warning

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Fulghum <paulkf@microgate.com>

commit fc01d8c61ce02c034e67378cd3e645734bc18c8c upstream.

Fix __might_sleep warning[1] in tty/n_hdlc.c read due to copy_to_user
call while current is TASK_INTERRUPTIBLE.  This is a false positive
since the code path does not depend on current state remaining
TASK_INTERRUPTIBLE.  The loop breaks out and sets TASK_RUNNING after
calling copy_to_user.

This patch supresses the warning by setting TASK_RUNNING before calling
copy_to_user.

[1] https://syzkaller.appspot.com/bug?id=17d5de7f1fcab794cb8c40032f893f52de899324

Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Reported-by: syzbot <syzbot+c244af085a0159d22879@syzkaller.appspotmail.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: stable <stable@vger.kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/n_hdlc.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/tty/n_hdlc.c
+++ b/drivers/tty/n_hdlc.c
@@ -598,6 +598,7 @@ static ssize_t n_hdlc_tty_read(struct tt
 				/* too large for caller's buffer */
 				ret = -EOVERFLOW;
 			} else {
+				__set_current_state(TASK_RUNNING);
 				if (copy_to_user(buf, rbuf->buf, rbuf->count))
 					ret = -EFAULT;
 				else

[PATCH 4.9 22/44] CIFS: Fix possible hang during async MTU reads and writes

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pavel Shilovsky <pshilov@microsoft.com>

commit acc58d0bab55a50e02c25f00bd6a210ee121595f upstream.

When doing MTU i/o we need to leave some credits for
possible reopen requests and other operations happening
in parallel. Currently we leave 1 credit which is not
enough even for reopen only: we need at least 2 credits
if durable handle reconnect fails. Also there may be
other operations at the same time including compounding
ones which require 3 credits at a time each. Fix this
by leaving 8 credits which is big enough to cover most
scenarios.

Was able to reproduce this when server was configured
to give out fewer credits than usual.

The proper fix would be to reconnect a file handle first
and then obtain credits for an MTU request but this leads
to bigger code changes and should happen in other patches.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/smb2ops.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -148,14 +148,14 @@ smb2_wait_mtu_credits(struct TCP_Server_
 
 			scredits = server->credits;
 			/* can deadlock with reopen */
-			if (scredits == 1) {
+			if (scredits <= 8) {
 				*num = SMB2_MAX_BUFFER_SIZE;
 				*credits = 0;
 				break;
 			}
 
-			/* leave one credit for a possible reopen */
-			scredits--;
+			/* leave some credits for reopen and other ops */
+			scredits -= 8;
 			*num = min_t(unsigned int, size,
 				     scredits * SMB2_MAX_BUFFER_SIZE);
 

[PATCH 4.9 23/44] CIFS: Do not reconnect TCP session in add_credits()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pavel Shilovsky <pshilov@microsoft.com>

commit ef68e831840c40c7d01b328b3c0f5d8c4796c232 upstream.

When executing add_credits() we currently call cifs_reconnect()
if the number of credits is zero and there are no requests in
flight. In this case we may call cifs_reconnect() recursively
twice and cause memory corruption given the following sequence
of functions:

mid1.callback() -> add_credits() -> cifs_reconnect() ->
-> mid2.callback() -> add_credits() -> cifs_reconnect().

Fix this by avoiding to call cifs_reconnect() in add_credits()
and checking for zero credits in the demultiplex thread.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/connect.c |   21 +++++++++++++++++++++
 fs/cifs/smb2ops.c |   32 +++++++++++++++++++++++++-------
 2 files changed, 46 insertions(+), 7 deletions(-)

--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -518,6 +518,21 @@ server_unresponsive(struct TCP_Server_In
 	return false;
 }
 
+static inline bool
+zero_credits(struct TCP_Server_Info *server)
+{
+	int val;
+
+	spin_lock(&server->req_lock);
+	val = server->credits + server->echo_credits + server->oplock_credits;
+	if (server->in_flight == 0 && val == 0) {
+		spin_unlock(&server->req_lock);
+		return true;
+	}
+	spin_unlock(&server->req_lock);
+	return false;
+}
+
 static int
 cifs_readv_from_socket(struct TCP_Server_Info *server, struct msghdr *smb_msg)
 {
@@ -530,6 +545,12 @@ cifs_readv_from_socket(struct TCP_Server
 	for (total_read = 0; msg_data_left(smb_msg); total_read += length) {
 		try_to_freeze();
 
+		/* reconnect if no credits and no requests in flight */
+		if (zero_credits(server)) {
+			cifs_reconnect(server);
+			return -ECONNABORTED;
+		}
+
 		if (server_unresponsive(server))
 			return -ECONNABORTED;
 
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -30,6 +30,7 @@
 #include "smb2glob.h"
 #include "cifs_ioctl.h"
 
+/* Change credits for different ops and return the total number of credits */
 static int
 change_conf(struct TCP_Server_Info *server)
 {
@@ -37,17 +38,15 @@ change_conf(struct TCP_Server_Info *serv
 	server->oplock_credits = server->echo_credits = 0;
 	switch (server->credits) {
 	case 0:
-		return -1;
+		return 0;
 	case 1:
 		server->echoes = false;
 		server->oplocks = false;
-		cifs_dbg(VFS, "disabling echoes and oplocks\n");
 		break;
 	case 2:
 		server->echoes = true;
 		server->oplocks = false;
 		server->echo_credits = 1;
-		cifs_dbg(FYI, "disabling oplocks\n");
 		break;
 	default:
 		server->echoes = true;
@@ -60,14 +59,15 @@ change_conf(struct TCP_Server_Info *serv
 		server->echo_credits = 1;
 	}
 	server->credits -= server->echo_credits + server->oplock_credits;
-	return 0;
+	return server->credits + server->echo_credits + server->oplock_credits;
 }
 
 static void
 smb2_add_credits(struct TCP_Server_Info *server, const unsigned int add,
 		 const int optype)
 {
-	int *val, rc = 0;
+	int *val, rc = -1;
+
 	spin_lock(&server->req_lock);
 	val = server->ops->get_credits_field(server, optype);
 	*val += add;
@@ -91,8 +91,26 @@ smb2_add_credits(struct TCP_Server_Info
 	}
 	spin_unlock(&server->req_lock);
 	wake_up(&server->request_q);
-	if (rc)
-		cifs_reconnect(server);
+
+	if (server->tcpStatus == CifsNeedReconnect)
+		return;
+
+	switch (rc) {
+	case -1:
+		/* change_conf hasn't been executed */
+		break;
+	case 0:
+		cifs_dbg(VFS, "Possible client or server bug - zero credits\n");
+		break;
+	case 1:
+		cifs_dbg(VFS, "disabling echoes and oplocks\n");
+		break;
+	case 2:
+		cifs_dbg(FYI, "disabling oplocks\n");
+		break;
+	default:
+		cifs_dbg(FYI, "add %u credits total=%d\n", add, rc);
+	}
 }
 
 static void

[PATCH 4.9 24/44] Input: xpad - add support for SteelSeries Stratus Duo

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tom Panfil <tom@steelseries.com>

commit fe2bfd0d40c935763812973ce15f5764f1c12833 upstream.

Add support for the SteelSeries Stratus Duo, a wireless Xbox 360
controller. The Stratus Duo ships with a USB dongle to enable wireless
connectivity, but it can also function as a wired controller by connecting
it directly to a PC via USB, hence the need for two USD PIDs. 0x1430 is the
dongle, and 0x1431 is the controller.

Signed-off-by: Tom Panfil <tom@steelseries.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/joystick/xpad.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -255,6 +255,8 @@ static const struct xpad_device {
 	{ 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX },
 	{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
 	{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX },
+	{ 0x1038, 0x1430, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 },
+	{ 0x1038, 0x1431, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 },
 	{ 0x11c9, 0x55f0, "Nacon GC-100XF", 0, XTYPE_XBOX360 },
 	{ 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x12ab, 0x0301, "PDP AFTERGLOW AX.1", 0, XTYPE_XBOX360 },
@@ -431,6 +433,7 @@ static const struct usb_device_id xpad_t
 	XPAD_XBOXONE_VENDOR(0x0e6f),		/* 0x0e6f X-Box One controllers */
 	XPAD_XBOX360_VENDOR(0x0f0d),		/* Hori Controllers */
 	XPAD_XBOXONE_VENDOR(0x0f0d),		/* Hori Controllers */
+	XPAD_XBOX360_VENDOR(0x1038),		/* SteelSeries Controllers */
 	XPAD_XBOX360_VENDOR(0x11c9),		/* Nacon GC100XF */
 	XPAD_XBOX360_VENDOR(0x12ab),		/* X-Box 360 dance pads */
 	XPAD_XBOX360_VENDOR(0x1430),		/* RedOctane X-Box 360 controllers */

[PATCH 4.9 25/44] compiler.h: enable builtin overflow checkers and add fallback code

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rasmus Villemoes <linux@rasmusvillemoes.dk>

commit f0907827a8a9152aedac2833ed1b674a7b2a44f2 upstream.

This adds wrappers for the __builtin overflow checkers present in gcc
5.1+ as well as fallback implementations for earlier compilers. It's not
that easy to implement the fully generic __builtin_X_overflow(T1 a, T2
b, T3 *d) in macros, so the fallback code assumes that T1, T2 and T3 are
the same. We obviously don't want the wrappers to have different
semantics depending on $GCC_VERSION, so we also insist on that even when
using the builtins.

There are a few problems with the 'a+b < a' idiom for checking for
overflow: For signed types, it relies on undefined behaviour and is
not actually complete (it doesn't check underflow;
e.g. INT_MIN+INT_MIN == 0 isn't caught). Due to type promotion it
is wrong for all types (signed and unsigned) narrower than
int. Similarly, when a and b does not have the same type, there are
subtle cases like

  u32 a;

  if (a + sizeof(foo) < a)
    return -EOVERFLOW;
  a += sizeof(foo);

where the test is always false on 64 bit platforms. Add to that that it
is not always possible to determine the types involved at a glance.

The new overflow.h is somewhat bulky, but that's mostly a result of
trying to be type-generic, complete (e.g. catching not only overflow
but also signed underflow) and not relying on undefined behaviour.

Linus is of course right [1] that for unsigned subtraction a-b, the
right way to check for overflow (underflow) is "b > a" and not
"__builtin_sub_overflow(a, b, &d)", but that's just one out of six cases
covered here, and included mostly for completeness.

So is it worth it? I think it is, if nothing else for the documentation
value of seeing

  if (check_add_overflow(a, b, &d))
    return -EGOAWAY;
  do_stuff_with(d);

instead of the open-coded (and possibly wrong and/or incomplete and/or
UBsan-tickling)

  if (a+b < a)
    return -EGOAWAY;
  do_stuff_with(a+b);

While gcc does recognize the 'a+b < a' idiom for testing unsigned add
overflow, it doesn't do nearly as good for unsigned multiplication
(there's also no single well-established idiom). So using
check_mul_overflow in kcalloc and friends may also make gcc generate
slightly better code.

[1] https://lkml.org/lkml/2015/11/2/658

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/compiler-clang.h |   14 ++
 include/linux/compiler-gcc.h   |    4 
 include/linux/compiler-intel.h |    4 
 include/linux/overflow.h       |  205 +++++++++++++++++++++++++++++++++++++++++
 4 files changed, 227 insertions(+)

--- a/include/linux/compiler-clang.h
+++ b/include/linux/compiler-clang.h
@@ -23,3 +23,17 @@
 #ifdef __noretpoline
 #undef __noretpoline
 #endif
+
+/*
+ * Not all versions of clang implement the the type-generic versions
+ * of the builtin overflow checkers. Fortunately, clang implements
+ * __has_builtin allowing us to avoid awkward version
+ * checks. Unfortunately, we don't know which version of gcc clang
+ * pretends to be, so the macro may or may not be defined.
+ */
+#undef COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW
+#if __has_builtin(__builtin_mul_overflow) && \
+    __has_builtin(__builtin_add_overflow) && \
+    __has_builtin(__builtin_sub_overflow)
+#define COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW 1
+#endif
--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -334,3 +334,7 @@
  * code
  */
 #define uninitialized_var(x) x = x
+
+#if GCC_VERSION >= 50100
+#define COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW 1
+#endif
--- a/include/linux/compiler-intel.h
+++ b/include/linux/compiler-intel.h
@@ -43,3 +43,7 @@
 #define __builtin_bswap16 _bswap16
 #endif
 
+/*
+ * icc defines __GNUC__, but does not implement the builtin overflow checkers.
+ */
+#undef COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW
--- /dev/null
+++ b/include/linux/overflow.h
@@ -0,0 +1,205 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+#ifndef __LINUX_OVERFLOW_H
+#define __LINUX_OVERFLOW_H
+
+#include <linux/compiler.h>
+
+/*
+ * In the fallback code below, we need to compute the minimum and
+ * maximum values representable in a given type. These macros may also
+ * be useful elsewhere, so we provide them outside the
+ * COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW block.
+ *
+ * It would seem more obvious to do something like
+ *
+ * #define type_min(T) (T)(is_signed_type(T) ? (T)1 << (8*sizeof(T)-1) : 0)
+ * #define type_max(T) (T)(is_signed_type(T) ? ((T)1 << (8*sizeof(T)-1)) - 1 : ~(T)0)
+ *
+ * Unfortunately, the middle expressions, strictly speaking, have
+ * undefined behaviour, and at least some versions of gcc warn about
+ * the type_max expression (but not if -fsanitize=undefined is in
+ * effect; in that case, the warning is deferred to runtime...).
+ *
+ * The slightly excessive casting in type_min is to make sure the
+ * macros also produce sensible values for the exotic type _Bool. [The
+ * overflow checkers only almost work for _Bool, but that's
+ * a-feature-not-a-bug, since people shouldn't be doing arithmetic on
+ * _Bools. Besides, the gcc builtins don't allow _Bool* as third
+ * argument.]
+ *
+ * Idea stolen from
+ * https://mail-index.netbsd.org/tech-misc/2007/02/05/0000.html -
+ * credit to Christian Biere.
+ */
+#define is_signed_type(type)       (((type)(-1)) < (type)1)
+#define __type_half_max(type) ((type)1 << (8*sizeof(type) - 1 - is_signed_type(type)))
+#define type_max(T) ((T)((__type_half_max(T) - 1) + __type_half_max(T)))
+#define type_min(T) ((T)((T)-type_max(T)-(T)1))
+
+
+#ifdef COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW
+/*
+ * For simplicity and code hygiene, the fallback code below insists on
+ * a, b and *d having the same type (similar to the min() and max()
+ * macros), whereas gcc's type-generic overflow checkers accept
+ * different types. Hence we don't just make check_add_overflow an
+ * alias for __builtin_add_overflow, but add type checks similar to
+ * below.
+ */
+#define check_add_overflow(a, b, d) ({		\
+	typeof(a) __a = (a);			\
+	typeof(b) __b = (b);			\
+	typeof(d) __d = (d);			\
+	(void) (&__a == &__b);			\
+	(void) (&__a == __d);			\
+	__builtin_add_overflow(__a, __b, __d);	\
+})
+
+#define check_sub_overflow(a, b, d) ({		\
+	typeof(a) __a = (a);			\
+	typeof(b) __b = (b);			\
+	typeof(d) __d = (d);			\
+	(void) (&__a == &__b);			\
+	(void) (&__a == __d);			\
+	__builtin_sub_overflow(__a, __b, __d);	\
+})
+
+#define check_mul_overflow(a, b, d) ({		\
+	typeof(a) __a = (a);			\
+	typeof(b) __b = (b);			\
+	typeof(d) __d = (d);			\
+	(void) (&__a == &__b);			\
+	(void) (&__a == __d);			\
+	__builtin_mul_overflow(__a, __b, __d);	\
+})
+
+#else
+
+
+/* Checking for unsigned overflow is relatively easy without causing UB. */
+#define __unsigned_add_overflow(a, b, d) ({	\
+	typeof(a) __a = (a);			\
+	typeof(b) __b = (b);			\
+	typeof(d) __d = (d);			\
+	(void) (&__a == &__b);			\
+	(void) (&__a == __d);			\
+	*__d = __a + __b;			\
+	*__d < __a;				\
+})
+#define __unsigned_sub_overflow(a, b, d) ({	\
+	typeof(a) __a = (a);			\
+	typeof(b) __b = (b);			\
+	typeof(d) __d = (d);			\
+	(void) (&__a == &__b);			\
+	(void) (&__a == __d);			\
+	*__d = __a - __b;			\
+	__a < __b;				\
+})
+/*
+ * If one of a or b is a compile-time constant, this avoids a division.
+ */
+#define __unsigned_mul_overflow(a, b, d) ({		\
+	typeof(a) __a = (a);				\
+	typeof(b) __b = (b);				\
+	typeof(d) __d = (d);				\
+	(void) (&__a == &__b);				\
+	(void) (&__a == __d);				\
+	*__d = __a * __b;				\
+	__builtin_constant_p(__b) ?			\
+	  __b > 0 && __a > type_max(typeof(__a)) / __b : \
+	  __a > 0 && __b > type_max(typeof(__b)) / __a;	 \
+})
+
+/*
+ * For signed types, detecting overflow is much harder, especially if
+ * we want to avoid UB. But the interface of these macros is such that
+ * we must provide a result in *d, and in fact we must produce the
+ * result promised by gcc's builtins, which is simply the possibly
+ * wrapped-around value. Fortunately, we can just formally do the
+ * operations in the widest relevant unsigned type (u64) and then
+ * truncate the result - gcc is smart enough to generate the same code
+ * with and without the (u64) casts.
+ */
+
+/*
+ * Adding two signed integers can overflow only if they have the same
+ * sign, and overflow has happened iff the result has the opposite
+ * sign.
+ */
+#define __signed_add_overflow(a, b, d) ({	\
+	typeof(a) __a = (a);			\
+	typeof(b) __b = (b);			\
+	typeof(d) __d = (d);			\
+	(void) (&__a == &__b);			\
+	(void) (&__a == __d);			\
+	*__d = (u64)__a + (u64)__b;		\
+	(((~(__a ^ __b)) & (*__d ^ __a))	\
+		& type_min(typeof(__a))) != 0;	\
+})
+
+/*
+ * Subtraction is similar, except that overflow can now happen only
+ * when the signs are opposite. In this case, overflow has happened if
+ * the result has the opposite sign of a.
+ */
+#define __signed_sub_overflow(a, b, d) ({	\
+	typeof(a) __a = (a);			\
+	typeof(b) __b = (b);			\
+	typeof(d) __d = (d);			\
+	(void) (&__a == &__b);			\
+	(void) (&__a == __d);			\
+	*__d = (u64)__a - (u64)__b;		\
+	((((__a ^ __b)) & (*__d ^ __a))		\
+		& type_min(typeof(__a))) != 0;	\
+})
+
+/*
+ * Signed multiplication is rather hard. gcc always follows C99, so
+ * division is truncated towards 0. This means that we can write the
+ * overflow check like this:
+ *
+ * (a > 0 && (b > MAX/a || b < MIN/a)) ||
+ * (a < -1 && (b > MIN/a || b < MAX/a) ||
+ * (a == -1 && b == MIN)
+ *
+ * The redundant casts of -1 are to silence an annoying -Wtype-limits
+ * (included in -Wextra) warning: When the type is u8 or u16, the
+ * __b_c_e in check_mul_overflow obviously selects
+ * __unsigned_mul_overflow, but unfortunately gcc still parses this
+ * code and warns about the limited range of __b.
+ */
+
+#define __signed_mul_overflow(a, b, d) ({				\
+	typeof(a) __a = (a);						\
+	typeof(b) __b = (b);						\
+	typeof(d) __d = (d);						\
+	typeof(a) __tmax = type_max(typeof(a));				\
+	typeof(a) __tmin = type_min(typeof(a));				\
+	(void) (&__a == &__b);						\
+	(void) (&__a == __d);						\
+	*__d = (u64)__a * (u64)__b;					\
+	(__b > 0   && (__a > __tmax/__b || __a < __tmin/__b)) ||	\
+	(__b < (typeof(__b))-1  && (__a > __tmin/__b || __a < __tmax/__b)) || \
+	(__b == (typeof(__b))-1 && __a == __tmin);			\
+})
+
+
+#define check_add_overflow(a, b, d)					\
+	__builtin_choose_expr(is_signed_type(typeof(a)),		\
+			__signed_add_overflow(a, b, d),			\
+			__unsigned_add_overflow(a, b, d))
+
+#define check_sub_overflow(a, b, d)					\
+	__builtin_choose_expr(is_signed_type(typeof(a)),		\
+			__signed_sub_overflow(a, b, d),			\
+			__unsigned_sub_overflow(a, b, d))
+
+#define check_mul_overflow(a, b, d)					\
+	__builtin_choose_expr(is_signed_type(typeof(a)),		\
+			__signed_mul_overflow(a, b, d),			\
+			__unsigned_mul_overflow(a, b, d))
+
+
+#endif /* COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW */
+
+#endif /* __LINUX_OVERFLOW_H */

[PATCH 4.9 26/44] Input: uinput - fix undefined behavior in uinput_validate_absinfo()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

commit d77651a227f8920dd7ec179b84e400cce844eeb3 upstream.

An integer overflow may arise in uinput_validate_absinfo() if "max - min"
can't be represented by an "int". We should check for overflow before
trying to use the result.

Reported-by: Kyungtae Kim <kt0755@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/misc/uinput.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -39,6 +39,7 @@
 #include <linux/fs.h>
 #include <linux/miscdevice.h>
 #include <linux/uinput.h>
+#include <linux/overflow.h>
 #include <linux/input/mt.h>
 #include "../input-compat.h"
 
@@ -335,7 +336,7 @@ static int uinput_open(struct inode *ino
 static int uinput_validate_absinfo(struct input_dev *dev, unsigned int code,
 				   const struct input_absinfo *abs)
 {
-	int min, max;
+	int min, max, range;
 
 	min = abs->minimum;
 	max = abs->maximum;
@@ -347,7 +348,7 @@ static int uinput_validate_absinfo(struc
 		return -EINVAL;
 	}
 
-	if (abs->flat > max - min) {
+	if (!check_sub_overflow(max, min, &range) && abs->flat > range) {
 		printk(KERN_DEBUG
 		       "%s: abs_flat #%02x out of range: %d (min:%d/max:%d)\n",
 		       UINPUT_NAME, code, abs->flat, min, max);

[PATCH 4.9 27/44] acpi/nfit: Block function zero DSMs

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Williams <dan.j.williams@intel.com>

commit 5e9e38d0db1d29efed1dd4cf9a70115d33521be7 upstream.

In preparation for using function number 0 as an error value, prevent it
from being considered a valid function value by acpi_nfit_ctl().

Cc: <stable@vger.kernel.org>
Cc: stuart hayes <stuart.w.hayes@gmail.com>
Fixes: e02fb7264d8a ("nfit: add Microsoft NVDIMM DSM command set...")
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/nfit/core.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/acpi/nfit/core.c
+++ b/drivers/acpi/nfit/core.c
@@ -1433,6 +1433,13 @@ static int acpi_nfit_add_dimm(struct acp
 		return 0;
 	}
 
+	/*
+	 * Function 0 is the command interrogation function, don't
+	 * export it to potential userspace use, and enable it to be
+	 * used as an error value in acpi_nfit_ctl().
+	 */
+	dsm_mask &= ~1UL;
+
 	uuid = to_nfit_uuid(nfit_mem->family);
 	for_each_set_bit(i, &dsm_mask, BITS_PER_LONG)
 		if (acpi_check_dsm(adev_dimm->handle, uuid, 1, 1ULL << i))

[PATCH 4.9 28/44] acpi/nfit: Fix command-supported detection

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Williams <dan.j.williams@intel.com>

commit 11189c1089da413aa4b5fd6be4c4d47c78968819 upstream.

The _DSM function number validation only happens to succeed when the
generic Linux command number translation corresponds with a
DSM-family-specific function number. This breaks NVDIMM-N
implementations that correctly implement _LSR, _LSW, and _LSI, but do
not happen to publish support for DSM function numbers 4, 5, and 6.

Recall that the support for _LS{I,R,W} family of methods results in the
DIMM being marked as supporting those command numbers at
acpi_nfit_register_dimms() time. The DSM function mask is only used for
ND_CMD_CALL support of non-NVDIMM_FAMILY_INTEL devices.

Fixes: 31eca76ba2fc ("nfit, libnvdimm: limited/whitelisted dimm command...")
Cc: <stable@vger.kernel.org>
Link: https://github.com/pmem/ndctl/issues/78
Reported-by: Sujith Pandel <sujith_pandel@dell.com>
Tested-by: Sujith Pandel <sujith_pandel@dell.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/nfit/core.c |   50 +++++++++++++++++++++++++++++++++++++----------
 1 file changed, 40 insertions(+), 10 deletions(-)

--- a/drivers/acpi/nfit/core.c
+++ b/drivers/acpi/nfit/core.c
@@ -185,6 +185,32 @@ static int xlat_status(struct nvdimm *nv
 	return 0;
 }
 
+static int cmd_to_func(struct nfit_mem *nfit_mem, unsigned int cmd,
+		struct nd_cmd_pkg *call_pkg)
+{
+	if (call_pkg) {
+		int i;
+
+		if (nfit_mem->family != call_pkg->nd_family)
+			return -ENOTTY;
+
+		for (i = 0; i < ARRAY_SIZE(call_pkg->nd_reserved2); i++)
+			if (call_pkg->nd_reserved2[i])
+				return -EINVAL;
+		return call_pkg->nd_command;
+	}
+
+	/* Linux ND commands == NVDIMM_FAMILY_INTEL function numbers */
+	if (nfit_mem->family == NVDIMM_FAMILY_INTEL)
+		return cmd;
+
+	/*
+	 * Force function number validation to fail since 0 is never
+	 * published as a valid function in dsm_mask.
+	 */
+	return 0;
+}
+
 int acpi_nfit_ctl(struct nvdimm_bus_descriptor *nd_desc, struct nvdimm *nvdimm,
 		unsigned int cmd, void *buf, unsigned int buf_len, int *cmd_rc)
 {
@@ -197,17 +223,11 @@ int acpi_nfit_ctl(struct nvdimm_bus_desc
 	unsigned long cmd_mask, dsm_mask;
 	u32 offset, fw_status = 0;
 	acpi_handle handle;
-	unsigned int func;
 	const u8 *uuid;
-	int rc, i;
+	int func, rc, i;
 
 	if (cmd_rc)
 		*cmd_rc = -EINVAL;
-	func = cmd;
-	if (cmd == ND_CMD_CALL) {
-		call_pkg = buf;
-		func = call_pkg->nd_command;
-	}
 
 	if (nvdimm) {
 		struct nfit_mem *nfit_mem = nvdimm_provider_data(nvdimm);
@@ -215,9 +235,12 @@ int acpi_nfit_ctl(struct nvdimm_bus_desc
 
 		if (!adev)
 			return -ENOTTY;
-		if (call_pkg && nfit_mem->family != call_pkg->nd_family)
-			return -ENOTTY;
 
+		if (cmd == ND_CMD_CALL)
+			call_pkg = buf;
+		func = cmd_to_func(nfit_mem, cmd, call_pkg);
+		if (func < 0)
+			return func;
 		dimm_name = nvdimm_name(nvdimm);
 		cmd_name = nvdimm_cmd_name(cmd);
 		cmd_mask = nvdimm_cmd_mask(nvdimm);
@@ -228,6 +251,7 @@ int acpi_nfit_ctl(struct nvdimm_bus_desc
 	} else {
 		struct acpi_device *adev = to_acpi_dev(acpi_desc);
 
+		func = cmd;
 		cmd_name = nvdimm_bus_cmd_name(cmd);
 		cmd_mask = nd_desc->cmd_mask;
 		dsm_mask = cmd_mask;
@@ -240,7 +264,13 @@ int acpi_nfit_ctl(struct nvdimm_bus_desc
 	if (!desc || (cmd && (desc->out_num + desc->in_num == 0)))
 		return -ENOTTY;
 
-	if (!test_bit(cmd, &cmd_mask) || !test_bit(func, &dsm_mask))
+	/*
+	 * Check for a valid command.  For ND_CMD_CALL, we also have to
+	 * make sure that the DSM function is supported.
+	 */
+	if (cmd == ND_CMD_CALL && !test_bit(func, &dsm_mask))
+		return -ENOTTY;
+	else if (!test_bit(cmd, &cmd_mask))
 		return -ENOTTY;
 
 	in_obj.type = ACPI_TYPE_PACKAGE;

[PATCH 4.9 29/44] dm thin: fix passdown_double_checking_shared_status()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joe Thornber <ejt@redhat.com>

commit d445bd9cec1a850c2100fcf53684c13b3fd934f2 upstream.

Commit 00a0ea33b495 ("dm thin: do not queue freed thin mapping for next
stage processing") changed process_prepared_discard_passdown_pt1() to
increment all the blocks being discarded until after the passdown had
completed to avoid them being prematurely reused.

IO issued to a thin device that breaks sharing with a snapshot, followed
by a discard issued to snapshot(s) that previously shared the block(s),
results in passdown_double_checking_shared_status() being called to
iterate through the blocks double checking their reference count is zero
and issuing the passdown if so.  So a side effect of commit 00a0ea33b495
is passdown_double_checking_shared_status() was broken.

Fix this by checking if the block reference count is greater than 1.
Also, rename dm_pool_block_is_used() to dm_pool_block_is_shared().

Fixes: 00a0ea33b495 ("dm thin: do not queue freed thin mapping for next stage processing")
Cc: stable@vger.kernel.org # 4.9+
Reported-by: ryan.p.norwood@gmail.com
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-thin-metadata.c |    4 ++--
 drivers/md/dm-thin-metadata.h |    2 +-
 drivers/md/dm-thin.c          |   10 +++++-----
 3 files changed, 8 insertions(+), 8 deletions(-)

--- a/drivers/md/dm-thin-metadata.c
+++ b/drivers/md/dm-thin-metadata.c
@@ -1689,7 +1689,7 @@ int dm_thin_remove_range(struct dm_thin_
 	return r;
 }
 
-int dm_pool_block_is_used(struct dm_pool_metadata *pmd, dm_block_t b, bool *result)
+int dm_pool_block_is_shared(struct dm_pool_metadata *pmd, dm_block_t b, bool *result)
 {
 	int r;
 	uint32_t ref_count;
@@ -1697,7 +1697,7 @@ int dm_pool_block_is_used(struct dm_pool
 	down_read(&pmd->root_lock);
 	r = dm_sm_get_count(pmd->data_sm, b, &ref_count);
 	if (!r)
-		*result = (ref_count != 0);
+		*result = (ref_count > 1);
 	up_read(&pmd->root_lock);
 
 	return r;
--- a/drivers/md/dm-thin-metadata.h
+++ b/drivers/md/dm-thin-metadata.h
@@ -195,7 +195,7 @@ int dm_pool_get_metadata_dev_size(struct
 
 int dm_pool_get_data_dev_size(struct dm_pool_metadata *pmd, dm_block_t *result);
 
-int dm_pool_block_is_used(struct dm_pool_metadata *pmd, dm_block_t b, bool *result);
+int dm_pool_block_is_shared(struct dm_pool_metadata *pmd, dm_block_t b, bool *result);
 
 int dm_pool_inc_data_range(struct dm_pool_metadata *pmd, dm_block_t b, dm_block_t e);
 int dm_pool_dec_data_range(struct dm_pool_metadata *pmd, dm_block_t b, dm_block_t e);
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -1017,7 +1017,7 @@ static void passdown_double_checking_sha
 	 * passdown we have to check that these blocks are now unused.
 	 */
 	int r = 0;
-	bool used = true;
+	bool shared = true;
 	struct thin_c *tc = m->tc;
 	struct pool *pool = tc->pool;
 	dm_block_t b = m->data_block, e, end = m->data_block + m->virt_end - m->virt_begin;
@@ -1027,11 +1027,11 @@ static void passdown_double_checking_sha
 	while (b != end) {
 		/* find start of unmapped run */
 		for (; b < end; b++) {
-			r = dm_pool_block_is_used(pool->pmd, b, &used);
+			r = dm_pool_block_is_shared(pool->pmd, b, &shared);
 			if (r)
 				goto out;
 
-			if (!used)
+			if (!shared)
 				break;
 		}
 
@@ -1040,11 +1040,11 @@ static void passdown_double_checking_sha
 
 		/* find end of run */
 		for (e = b + 1; e != end; e++) {
-			r = dm_pool_block_is_used(pool->pmd, e, &used);
+			r = dm_pool_block_is_shared(pool->pmd, e, &shared);
 			if (r)
 				goto out;
 
-			if (used)
+			if (shared)
 				break;
 		}
 

[PATCH 4.9 30/44] KVM: x86: Fix single-step debugging

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Popov <alex.popov@linux.com>

commit 5cc244a20b86090c087073c124284381cdf47234 upstream.

The single-step debugging of KVM guests on x86 is broken: if we run
gdb 'stepi' command at the breakpoint when the guest interrupts are
enabled, RIP always jumps to native_apic_mem_write(). Then other
nasty effects follow.

Long investigation showed that on Jun 7, 2017 the
commit c8401dda2f0a00cd25c0 ("KVM: x86: fix singlestepping over syscall")
introduced the kvm_run.debug corruption: kvm_vcpu_do_singlestep() can
be called without X86_EFLAGS_TF set.

Let's fix it. Please consider that for -stable.

Signed-off-by: Alexander Popov <alex.popov@linux.com>
Cc: stable@vger.kernel.org
Fixes: c8401dda2f0a00cd25c0 ("KVM: x86: fix singlestepping over syscall")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/x86.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -5795,8 +5795,7 @@ restart:
 		toggle_interruptibility(vcpu, ctxt->interruptibility);
 		vcpu->arch.emulate_regs_need_sync_to_vcpu = false;
 		kvm_rip_write(vcpu, ctxt->eip);
-		if (r == EMULATE_DONE &&
-		    (ctxt->tf || (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)))
+		if (r == EMULATE_DONE && ctxt->tf)
 			kvm_vcpu_do_singlestep(vcpu, &r);
 		if (!ctxt->have_exception ||
 		    exception_type(ctxt->exception.vector) == EXCPT_TRAP)

[PATCH 4.9 31/44] x86/selftests/pkeys: Fork() to check for state being preserved

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Hansen <dave.hansen@linux.intel.com>

commit e1812933b17be7814f51b6c310c5d1ced7a9a5f5 upstream.

There was a bug where the per-mm pkey state was not being preserved across
fork() in the child.  fork() is performed in the pkey selftests, but all of
the pkey activity is performed in the parent.  The child does not perform
any actions sensitive to pkey state.

To make the test more sensitive to these kinds of bugs, add a fork() where
the parent exits, and execution continues in the child.

To achieve this let the key exhaustion test not terminate at the first
allocation failure and fork after 2*NR_PKEYS loops and continue in the
child.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: hpa@zytor.com
Cc: peterz@infradead.org
Cc: mpe@ellerman.id.au
Cc: will.deacon@arm.com
Cc: luto@kernel.org
Cc: jroedel@suse.de
Cc: stable@vger.kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/20190102215657.585704B7@viggo.jf.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/testing/selftests/x86/protection_keys.c |   41 +++++++++++++++++++-------
 1 file changed, 31 insertions(+), 10 deletions(-)

--- a/tools/testing/selftests/x86/protection_keys.c
+++ b/tools/testing/selftests/x86/protection_keys.c
@@ -1129,6 +1129,21 @@ void test_pkey_syscalls_bad_args(int *pt
 	pkey_assert(err);
 }
 
+void become_child(void)
+{
+	pid_t forkret;
+
+	forkret = fork();
+	pkey_assert(forkret >= 0);
+	dprintf3("[%d] fork() ret: %d\n", getpid(), forkret);
+
+	if (!forkret) {
+		/* in the child */
+		return;
+	}
+	exit(0);
+}
+
 /* Assumes that all pkeys other than 'pkey' are unallocated */
 void test_pkey_alloc_exhaust(int *ptr, u16 pkey)
 {
@@ -1139,7 +1154,7 @@ void test_pkey_alloc_exhaust(int *ptr, u
 	int nr_allocated_pkeys = 0;
 	int i;
 
-	for (i = 0; i < NR_PKEYS*2; i++) {
+	for (i = 0; i < NR_PKEYS*3; i++) {
 		int new_pkey;
 		dprintf1("%s() alloc loop: %d\n", __func__, i);
 		new_pkey = alloc_pkey();
@@ -1150,21 +1165,27 @@ void test_pkey_alloc_exhaust(int *ptr, u
 		if ((new_pkey == -1) && (errno == ENOSPC)) {
 			dprintf2("%s() failed to allocate pkey after %d tries\n",
 				__func__, nr_allocated_pkeys);
-			break;
+		} else {
+			/*
+			 * Ensure the number of successes never
+			 * exceeds the number of keys supported
+			 * in the hardware.
+			 */
+			pkey_assert(nr_allocated_pkeys < NR_PKEYS);
+			allocated_pkeys[nr_allocated_pkeys++] = new_pkey;
 		}
-		pkey_assert(nr_allocated_pkeys < NR_PKEYS);
-		allocated_pkeys[nr_allocated_pkeys++] = new_pkey;
+
+		/*
+		 * Make sure that allocation state is properly
+		 * preserved across fork().
+		 */
+		if (i == NR_PKEYS*2)
+			become_child();
 	}
 
 	dprintf3("%s()::%d\n", __func__, __LINE__);
 
 	/*
-	 * ensure it did not reach the end of the loop without
-	 * failure:
-	 */
-	pkey_assert(i < NR_PKEYS*2);
-
-	/*
 	 * There are 16 pkeys supported in hardware.  One is taken
 	 * up for the default (0) and another can be taken up by
 	 * an execute-only mapping.  Ensure that we can allocate

[PATCH 4.9 32/44] x86/kaslr: Fix incorrect i8254 outb() parameters

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Drake <drake@endlessm.com>

commit 7e6fc2f50a3197d0e82d1c0e86282976c9e6c8a4 upstream.

The outb() function takes parameters value and port, in that order.  Fix
the parameters used in the kalsr i8254 fallback code.

Fixes: 5bfce5ef55cb ("x86, kaslr: Provide randomness functions")
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: hpa@zytor.com
Cc: linux@endlessm.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190107034024.15005-1-drake@endlessm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/lib/kaslr.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/x86/lib/kaslr.c
+++ b/arch/x86/lib/kaslr.c
@@ -35,8 +35,8 @@ static inline u16 i8254(void)
 	u16 status, timer;
 
 	do {
-		outb(I8254_PORT_CONTROL,
-		     I8254_CMD_READBACK | I8254_SELECT_COUNTER0);
+		outb(I8254_CMD_READBACK | I8254_SELECT_COUNTER0,
+		     I8254_PORT_CONTROL);
 		status = inb(I8254_PORT_COUNTER0);
 		timer  = inb(I8254_PORT_COUNTER0);
 		timer |= inb(I8254_PORT_COUNTER0) << 8;

[PATCH 4.9 33/44] can: dev: __can_get_echo_skb(): fix bogous check for non-existing skb by removing it

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>

commit 7b12c8189a3dc50638e7d53714c88007268d47ef upstream.

This patch revert commit 7da11ba5c506
("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb")

After introduction of this change we encountered following new error
message on various i.MX plattforms (flexcan):

| flexcan 53fc8000.can can0: __can_get_echo_skb: BUG! Trying to echo non
| existing skb: can_priv::echo_skb[0]

The introduction of the message was a mistake because
priv->echo_skb[idx] = NULL is a perfectly valid in following case: If
CAN_RAW_LOOPBACK is disabled (setsockopt) in applications, the pkt_type
of the tx skb's given to can_put_echo_skb is set to PACKET_LOOPBACK. In
this case can_put_echo_skb will not set priv->echo_skb[idx]. It is
therefore kept NULL.

As additional argument for revert: The order of check and usage of idx
was changed. idx is used to access an array element before checking it's
boundaries.

Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>
Fixes: 7da11ba5c506 ("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/dev.c |   27 +++++++++++++--------------
 1 file changed, 13 insertions(+), 14 deletions(-)

--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -456,8 +456,6 @@ EXPORT_SYMBOL_GPL(can_put_echo_skb);
 struct sk_buff *__can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 *len_ptr)
 {
 	struct can_priv *priv = netdev_priv(dev);
-	struct sk_buff *skb = priv->echo_skb[idx];
-	struct canfd_frame *cf;
 
 	if (idx >= priv->echo_skb_max) {
 		netdev_err(dev, "%s: BUG! Trying to access can_priv::echo_skb out of bounds (%u/max %u)\n",
@@ -465,20 +463,21 @@ struct sk_buff *__can_get_echo_skb(struc
 		return NULL;
 	}
 
-	if (!skb) {
-		netdev_err(dev, "%s: BUG! Trying to echo non existing skb: can_priv::echo_skb[%u]\n",
-			   __func__, idx);
-		return NULL;
-	}
+	if (priv->echo_skb[idx]) {
+		/* Using "struct canfd_frame::len" for the frame
+		 * length is supported on both CAN and CANFD frames.
+		 */
+		struct sk_buff *skb = priv->echo_skb[idx];
+		struct canfd_frame *cf = (struct canfd_frame *)skb->data;
+		u8 len = cf->len;
 
-	/* Using "struct canfd_frame::len" for the frame
-	 * length is supported on both CAN and CANFD frames.
-	 */
-	cf = (struct canfd_frame *)skb->data;
-	*len_ptr = cf->len;
-	priv->echo_skb[idx] = NULL;
+		*len_ptr = len;
+		priv->echo_skb[idx] = NULL;
+
+		return skb;
+	}
 
-	return skb;
+	return NULL;
 }
 
 /*

[PATCH 4.9 34/44] can: bcm: check timer values before ktime conversion

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Hartkopp <socketcan@hartkopp.net>

commit 93171ba6f1deffd82f381d36cb13177872d023f6 upstream.

Kyungtae Kim detected a potential integer overflow in bcm_[rx|tx]_setup()
when the conversion into ktime multiplies the given value with NSEC_PER_USEC
(1000).

Reference: https://marc.info/?l=linux-can&m=154732118819828&w=2

Add a check for the given tv_usec, so that the value stays below one second.
Additionally limit the tv_sec value to a reasonable value for CAN related
use-cases of 400 days and ensure all values to be positive.

Reported-by: Kyungtae Kim <kt0755@gmail.com>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: linux-stable <stable@vger.kernel.org> # >= 2.6.26
Tested-by: Kyungtae Kim <kt0755@gmail.com>
Acked-by: Andre Naujoks <nautsch2@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/can/bcm.c |   27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -67,6 +67,9 @@
  */
 #define MAX_NFRAMES 256
 
+/* limit timers to 400 days for sending/timeouts */
+#define BCM_TIMER_SEC_MAX (400 * 24 * 60 * 60)
+
 /* use of last_frames[index].flags */
 #define RX_RECV    0x40 /* received data for this element */
 #define RX_THR     0x80 /* element not been sent due to throttle feature */
@@ -142,6 +145,22 @@ static inline ktime_t bcm_timeval_to_kti
 	return ktime_set(tv.tv_sec, tv.tv_usec * NSEC_PER_USEC);
 }
 
+/* check limitations for timeval provided by user */
+static bool bcm_is_invalid_tv(struct bcm_msg_head *msg_head)
+{
+	if ((msg_head->ival1.tv_sec < 0) ||
+	    (msg_head->ival1.tv_sec > BCM_TIMER_SEC_MAX) ||
+	    (msg_head->ival1.tv_usec < 0) ||
+	    (msg_head->ival1.tv_usec >= USEC_PER_SEC) ||
+	    (msg_head->ival2.tv_sec < 0) ||
+	    (msg_head->ival2.tv_sec > BCM_TIMER_SEC_MAX) ||
+	    (msg_head->ival2.tv_usec < 0) ||
+	    (msg_head->ival2.tv_usec >= USEC_PER_SEC))
+		return true;
+
+	return false;
+}
+
 #define CFSIZ(flags) ((flags & CAN_FD_FRAME) ? CANFD_MTU : CAN_MTU)
 #define OPSIZ sizeof(struct bcm_op)
 #define MHSIZ sizeof(struct bcm_msg_head)
@@ -884,6 +903,10 @@ static int bcm_tx_setup(struct bcm_msg_h
 	if (msg_head->nframes < 1 || msg_head->nframes > MAX_NFRAMES)
 		return -EINVAL;
 
+	/* check timeval limitations */
+	if ((msg_head->flags & SETTIMER) && bcm_is_invalid_tv(msg_head))
+		return -EINVAL;
+
 	/* check the given can_id */
 	op = bcm_find_op(&bo->tx_ops, msg_head, ifindex);
 	if (op) {
@@ -1063,6 +1086,10 @@ static int bcm_rx_setup(struct bcm_msg_h
 	     (!(msg_head->can_id & CAN_RTR_FLAG))))
 		return -EINVAL;
 
+	/* check timeval limitations */
+	if ((msg_head->flags & SETTIMER) && bcm_is_invalid_tv(msg_head))
+		return -EINVAL;
+
 	/* check the given can_id */
 	op = bcm_find_op(&bo->rx_ops, msg_head, ifindex);
 	if (op) {

[PATCH 4.9 35/44] vt: invoke notifier on screen size change

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicolas Pitre <nicolas.pitre@linaro.org>

commit 0c9b1965faddad7534b6974b5b36c4ad37998f8e upstream.

User space using poll() on /dev/vcs devices are not awaken when a
screen size change occurs. Let's fix that.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/vt/vt.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -956,6 +956,7 @@ static int vc_do_resize(struct tty_struc
 	if (con_is_visible(vc))
 		update_screen(vc);
 	vt_event_post(VT_EVENT_RESIZE, vc->vc_num, vc->vc_num);
+	notify_update(vc);
 	return err;
 }
 

[PATCH 4.9 36/44] perf unwind: Unwind with libdw doesnt take symfs into account

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 3d20c6246690219881786de10d2dda93f616d0ac ]

Path passed to libdw for unwinding doesn't include symfs path
if specified, so unwinding fails because ELF file is not found.

Similar to unwinding with libunwind, pass symsrc_filename instead
of long_name. If there is no symsrc_filename, fallback to long_name.

Signed-off-by: Martin Vuille <jpmv27@aim.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20180211212420.18388-1-jpmv27@aim.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/unwind-libdw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/unwind-libdw.c b/tools/perf/util/unwind-libdw.c
index b46e1cf347e5..b34085ae3e32 100644
--- a/tools/perf/util/unwind-libdw.c
+++ b/tools/perf/util/unwind-libdw.c
@@ -48,7 +48,7 @@ static int __report_module(struct addr_location *al, u64 ip,
 
 	if (!mod)
 		mod = dwfl_report_elf(ui->dwfl, dso->short_name,
-				      dso->long_name, -1, al->map->start,
+				      (dso->symsrc_filename ? dso->symsrc_filename : dso->long_name), -1, al->map->start,
 				      false);
 
 	return mod && dwfl_addrmodule(ui->dwfl, ip) == mod ? 0 : -1;
-- 
2.19.1

[PATCH 4.9 37/44] perf unwind: Take pgoff into account when reporting elf to libdwfl

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 1fe627da30331024f453faef04d500079b901107 ]

libdwfl parses an ELF file itself and creates mappings for the
individual sections. perf on the other hand sees raw mmap events which
represent individual sections. When we encounter an address pointing
into a mapping with pgoff != 0, we must take that into account and
report the file at the non-offset base address.

This fixes unwinding with libdwfl in some cases. E.g. for a file like:

```

using namespace std;

mutex g_mutex;

double worker()
{
    lock_guard<mutex> guard(g_mutex);
    uniform_real_distribution<double> uniform(-1E5, 1E5);
    default_random_engine engine;
    double s = 0;
    for (int i = 0; i < 1000; ++i) {
        s += norm(complex<double>(uniform(engine), uniform(engine)));
    }
    cout << s << endl;
    return s;
}

int main()
{
    vector<std::future<double>> results;
    for (int i = 0; i < 10000; ++i) {
        results.push_back(async(launch::async, worker));
    }
    return 0;
}
```

Compile it with `g++ -g -O2 -lpthread cpp-locking.cpp  -o cpp-locking`,
then record it with `perf record --call-graph dwarf -e
sched:sched_switch`.

When you analyze it with `perf script` and libunwind, you should see:

```
cpp-locking 20038 [005] 54830.236589: sched:sched_switch: prev_comm=cpp-locking prev_pid=20038 prev_prio=120 prev_state=T ==> next_comm=swapper/5 next_pid=0 next_prio=120
        ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb1670208 schedule+0x28 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb16737cc rwsem_down_read_failed+0xec (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb1665e04 call_rwsem_down_read_failed+0x14 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb1672a03 down_read+0x13 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb106bd85 __do_page_fault+0x445 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb18015f5 page_fault+0x45 (/lib/modules/4.14.78-1-lts/build/vmlinux)
            7f38e4252591 new_heap+0x101 (/usr/lib/libc-2.28.so)
            7f38e4252d0b arena_get2.part.4+0x2fb (/usr/lib/libc-2.28.so)
            7f38e4255b1c tcache_init.part.6+0xec (/usr/lib/libc-2.28.so)
            7f38e42569e5 __GI___libc_malloc+0x115 (inlined)
            7f38e4241790 __GI__IO_file_doallocate+0x90 (inlined)
            7f38e424fbbf __GI__IO_doallocbuf+0x4f (inlined)
            7f38e424ee47 __GI__IO_file_overflow+0x197 (inlined)
            7f38e424df36 _IO_new_file_xsputn+0x116 (inlined)
            7f38e4242bfb __GI__IO_fwrite+0xdb (inlined)
            7f38e463fa6d std::basic_streambuf<char, std::char_traits<char> >::sputn(char const*, long)+0x1cd (inlined)
            7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> >::_M_put(char const*, long)+0x1cd (inlined)
            7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> > std::__write<char>(std::ostreambuf_iterator<char, std::char_traits<char> >, char const*, int)+0x1cd (inlined)
            7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> > std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::_M_insert_float<double>(std::ostreambuf_iterator<c>
            7f38e464bd70 std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::put(std::ostreambuf_iterator<char, std::char_traits<char> >, std::ios_base&, char, double) const+0x90 (inl>
            7f38e464bd70 std::ostream& std::ostream::_M_insert<double>(double)+0x90 (/usr/lib/libstdc++.so.6.0.25)
            563b9cb502f7 std::ostream::operator<<(double)+0xb7 (inlined)
            563b9cb502f7 worker()+0xb7 (/ssd/milian/projects/kdab/rnd/hotspot/build/tests/test-clients/cpp-locking/cpp-locking)
            563b9cb506fb double std::__invoke_impl<double, double (*)()>(std::__invoke_other, double (*&&)())+0x2b (inlined)
            563b9cb506fb std::__invoke_result<double (*)()>::type std::__invoke<double (*)()>(double (*&&)())+0x2b (inlined)
            563b9cb506fb decltype (__invoke((_S_declval<0ul>)())) std::thread::_Invoker<std::tuple<double (*)()> >::_M_invoke<0ul>(std::_Index_tuple<0ul>)+0x2b (inlined)
            563b9cb506fb std::thread::_Invoker<std::tuple<double (*)()> >::operator()()+0x2b (inlined)
            563b9cb506fb std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<double>, std::__future_base::_Result_base::_Deleter>, std::thread::_Invoker<std::tuple<double (*)()> >, dou>
            563b9cb506fb std::_Function_handler<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> (), std::__future_base::_Task_setter<std::unique_ptr<std::__future_>
            563b9cb507e8 std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>::operator()() const+0x28 (inlined)
            563b9cb507e8 std::__future_base::_State_baseV2::_M_do_set(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*)+0x28 (/ssd/milian/>
            7f38e46d24fe __pthread_once_slow+0xbe (/usr/lib/libpthread-2.28.so)
            563b9cb51149 __gthread_once+0xe9 (inlined)
            563b9cb51149 void std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*)>
            563b9cb51149 std::__future_base::_State_baseV2::_M_set_result(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>, bool)+0xe9 (inlined)
            563b9cb51149 std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread::_Invoker<std::tuple<double (*)()> >&&)::{lambda()#1}::op>
            563b9cb51149 void std::__invoke_impl<void, std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread::_Invoker<std::tuple<double>
            563b9cb51149 std::__invoke_result<std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread::_Invoker<std::tuple<double (*)()> >>
            563b9cb51149 decltype (__invoke((_S_declval<0ul>)())) std::thread::_Invoker<std::tuple<std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_>
            563b9cb51149 std::thread::_Invoker<std::tuple<std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread::_Invoker<std::tuple<dou>
            563b9cb51149 std::thread::_State_impl<std::thread::_Invoker<std::tuple<std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread>
            7f38e45f0062 execute_native_thread_routine+0x12 (/usr/lib/libstdc++.so.6.0.25)
            7f38e46caa9c start_thread+0xfc (/usr/lib/libpthread-2.28.so)
            7f38e42ccb22 __GI___clone+0x42 (inlined)
```

Before this patch, using libdwfl, you would see:

```
cpp-locking 20038 [005] 54830.236589: sched:sched_switch: prev_comm=cpp-locking prev_pid=20038 prev_prio=120 prev_state=T ==> next_comm=swapper/5 next_pid=0 next_prio=120
        ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb1670208 schedule+0x28 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb16737cc rwsem_down_read_failed+0xec (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb1665e04 call_rwsem_down_read_failed+0x14 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb1672a03 down_read+0x13 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb106bd85 __do_page_fault+0x445 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb18015f5 page_fault+0x45 (/lib/modules/4.14.78-1-lts/build/vmlinux)
            7f38e4252591 new_heap+0x101 (/usr/lib/libc-2.28.so)
        a041161e77950c5c [unknown] ([unknown])
```

With this patch applied, we get a bit further in unwinding:

```
cpp-locking 20038 [005] 54830.236589: sched:sched_switch: prev_comm=cpp-locking prev_pid=20038 prev_prio=120 prev_state=T ==> next_comm=swapper/5 next_pid=0 next_prio=120
        ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb1670208 schedule+0x28 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb16737cc rwsem_down_read_failed+0xec (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb1665e04 call_rwsem_down_read_failed+0x14 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb1672a03 down_read+0x13 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb106bd85 __do_page_fault+0x445 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb18015f5 page_fault+0x45 (/lib/modules/4.14.78-1-lts/build/vmlinux)
            7f38e4252591 new_heap+0x101 (/usr/lib/libc-2.28.so)
            7f38e4252d0b arena_get2.part.4+0x2fb (/usr/lib/libc-2.28.so)
            7f38e4255b1c tcache_init.part.6+0xec (/usr/lib/libc-2.28.so)
            7f38e42569e5 __GI___libc_malloc+0x115 (inlined)
            7f38e4241790 __GI__IO_file_doallocate+0x90 (inlined)
            7f38e424fbbf __GI__IO_doallocbuf+0x4f (inlined)
            7f38e424ee47 __GI__IO_file_overflow+0x197 (inlined)
            7f38e424df36 _IO_new_file_xsputn+0x116 (inlined)
            7f38e4242bfb __GI__IO_fwrite+0xdb (inlined)
            7f38e463fa6d std::basic_streambuf<char, std::char_traits<char> >::sputn(char const*, long)+0x1cd (inlined)
            7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> >::_M_put(char const*, long)+0x1cd (inlined)
            7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> > std::__write<char>(std::ostreambuf_iterator<char, std::char_traits<char> >, char const*, int)+0x1cd (inlined)
            7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> > std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::_M_insert_float<double>(std::ostreambuf_iterator<c>
            7f38e464bd70 std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::put(std::ostreambuf_iterator<char, std::char_traits<char> >, std::ios_base&, char, double) const+0x90 (inl>
            7f38e464bd70 std::ostream& std::ostream::_M_insert<double>(double)+0x90 (/usr/lib/libstdc++.so.6.0.25)
            563b9cb502f7 std::ostream::operator<<(double)+0xb7 (inlined)
            563b9cb502f7 worker()+0xb7 (/ssd/milian/projects/kdab/rnd/hotspot/build/tests/test-clients/cpp-locking/cpp-locking)
        6eab825c1ee3e4ff [unknown] ([unknown])
```

Note that the backtrace is still stopping too early, when compared to
the nice results obtained via libunwind. It's unclear so far what the
reason for that is.

Committer note:

Further comment by Milian on the thread started on the Link: tag below:

 ---
The remaining issue is due to a bug in elfutils:

https://sourceware.org/ml/elfutils-devel/2018-q4/msg00089.html

With both patches applied, libunwind and elfutils produce the same output for
the above scenario.
 ---

Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181029141644.3907-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/unwind-libdw.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/unwind-libdw.c b/tools/perf/util/unwind-libdw.c
index b34085ae3e32..046a4850e3df 100644
--- a/tools/perf/util/unwind-libdw.c
+++ b/tools/perf/util/unwind-libdw.c
@@ -42,13 +42,13 @@ static int __report_module(struct addr_location *al, u64 ip,
 		Dwarf_Addr s;
 
 		dwfl_module_info(mod, NULL, &s, NULL, NULL, NULL, NULL, NULL);
-		if (s != al->map->start)
+		if (s != al->map->start - al->map->pgoff)
 			mod = 0;
 	}
 
 	if (!mod)
 		mod = dwfl_report_elf(ui->dwfl, dso->short_name,
-				      (dso->symsrc_filename ? dso->symsrc_filename : dso->long_name), -1, al->map->start,
+				      (dso->symsrc_filename ? dso->symsrc_filename : dso->long_name), -1, al->map->start - al->map->pgoff,
 				      false);
 
 	return mod && dwfl_addrmodule(ui->dwfl, ip) == mod ? 0 : -1;
-- 
2.19.1

[PATCH 4.9 38/44] irqchip/gic-v3-its: Align PCI Multi-MSI allocation on their size

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marc Zyngier <marc.zyngier@arm.com>

commit 8208d1708b88b412ca97f50a6d951242c88cbbac upstream.

The way we allocate events works fine in most cases, except
when multiple PCI devices share an ITS-visible DevID, and that
one of them is trying to use MultiMSI allocation.

In that case, our allocation is not guaranteed to be zero-based
anymore, and we have to make sure we allocate it on a boundary
that is compatible with the PCI Multi-MSI constraints.

Fix this by allocating the full region upfront instead of iterating
over the number of MSIs. MSI-X are always allocated one by one,
so this shouldn't change anything on that front.

Fixes: b48ac83d6bbc2 ("irqchip: GICv3: ITS: MSI support")
Cc: stable@vger.kernel.org
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
[ardb: rebased onto v4.9.153, should apply cleanly onto v4.4.y as well]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

---
 drivers/irqchip/irq-gic-v3-its.c |   25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -1372,13 +1372,14 @@ static void its_free_device(struct its_d
 	kfree(its_dev);
 }
 
-static int its_alloc_device_irq(struct its_device *dev, irq_hw_number_t *hwirq)
+static int its_alloc_device_irq(struct its_device *dev, int nvecs, irq_hw_number_t *hwirq)
 {
 	int idx;
 
-	idx = find_first_zero_bit(dev->event_map.lpi_map,
-				  dev->event_map.nr_lpis);
-	if (idx == dev->event_map.nr_lpis)
+	idx = bitmap_find_free_region(dev->event_map.lpi_map,
+				      dev->event_map.nr_lpis,
+				      get_count_order(nvecs));
+	if (idx < 0)
 		return -ENOSPC;
 
 	*hwirq = dev->event_map.lpi_base + idx;
@@ -1464,20 +1465,20 @@ static int its_irq_domain_alloc(struct i
 	int err;
 	int i;
 
-	for (i = 0; i < nr_irqs; i++) {
-		err = its_alloc_device_irq(its_dev, &hwirq);
-		if (err)
-			return err;
+	err = its_alloc_device_irq(its_dev, nr_irqs, &hwirq);
+	if (err)
+		return err;
 
-		err = its_irq_gic_domain_alloc(domain, virq + i, hwirq);
+	for (i = 0; i < nr_irqs; i++) {
+		err = its_irq_gic_domain_alloc(domain, virq + i, hwirq + i);
 		if (err)
 			return err;
 
 		irq_domain_set_hwirq_and_chip(domain, virq + i,
-					      hwirq, &its_irq_chip, its_dev);
+					      hwirq + i, &its_irq_chip, its_dev);
 		pr_debug("ID:%d pID:%d vID:%d\n",
-			 (int)(hwirq - its_dev->event_map.lpi_base),
-			 (int) hwirq, virq + i);
+			 (int)(hwirq + i - its_dev->event_map.lpi_base),
+			 (int)(hwirq + i), virq + i);
 	}
 
 	return 0;

[PATCH 4.9 39/44] s390/smp: Fix calling smp_call_ipl_cpu() from ipl CPU

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Hildenbrand <david@redhat.com>

commit 60f1bf29c0b2519989927cae640cd1f50f59dc7f upstream.

When calling smp_call_ipl_cpu() from the IPL CPU, we will try to read
from pcpu_devices->lowcore. However, due to prefixing, that will result
in reading from absolute address 0 on that CPU. We have to go via the
actual lowcore instead.

This means that right now, we will read lc->nodat_stack == 0 and
therfore work on a very wrong stack.

This BUG essentially broke rebooting under QEMU TCG (which will report
a low address protection exception). And checking under KVM, it is
also broken under KVM. With 1 VCPU it can be easily triggered.

:/# echo 1 > /proc/sys/kernel/sysrq
:/# echo b > /proc/sysrq-trigger
[   28.476745] sysrq: SysRq : Resetting
[   28.476793] Kernel stack overflow.
[   28.476817] CPU: 0 PID: 424 Comm: sh Not tainted 5.0.0-rc1+ #13
[   28.476820] Hardware name: IBM 2964 NE1 716 (KVM/Linux)
[   28.476826] Krnl PSW : 0400c00180000000 0000000000115c0c (pcpu_delegate+0x12c/0x140)
[   28.476861]            R:0 T:1 IO:0 EX:0 Key:0 M:0 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
[   28.476863] Krnl GPRS: ffffffffffffffff 0000000000000000 000000000010dff8 0000000000000000
[   28.476864]            0000000000000000 0000000000000000 0000000000ab7090 000003e0006efbf0
[   28.476864]            000000000010dff8 0000000000000000 0000000000000000 0000000000000000
[   28.476865]            000000007fffc000 0000000000730408 000003e0006efc58 0000000000000000
[   28.476887] Krnl Code: 0000000000115bfe: 4170f000            la      %r7,0(%r15)
[   28.476887]            0000000000115c02: 41f0a000            la      %r15,0(%r10)
[   28.476887]           #0000000000115c06: e370f0980024        stg     %r7,152(%r15)
[   28.476887]           >0000000000115c0c: c0e5fffff86e        brasl   %r14,114ce8
[   28.476887]            0000000000115c12: 41f07000            la      %r15,0(%r7)
[   28.476887]            0000000000115c16: a7f4ffa8            brc     15,115b66
[   28.476887]            0000000000115c1a: 0707                bcr     0,%r7
[   28.476887]            0000000000115c1c: 0707                bcr     0,%r7
[   28.476901] Call Trace:
[   28.476902] Last Breaking-Event-Address:
[   28.476920]  [<0000000000a01c4a>] arch_call_rest_init+0x22/0x80
[   28.476927] Kernel panic - not syncing: Corrupt kernel stack, can't continue.
[   28.476930] CPU: 0 PID: 424 Comm: sh Not tainted 5.0.0-rc1+ #13
[   28.476932] Hardware name: IBM 2964 NE1 716 (KVM/Linux)
[   28.476932] Call Trace:

Fixes: 2f859d0dad81 ("s390/smp: reduce size of struct pcpu")
Cc: stable@vger.kernel.org # 4.0+
Reported-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 arch/s390/kernel/smp.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -357,9 +357,13 @@ void smp_call_online_cpu(void (*func)(vo
  */
 void smp_call_ipl_cpu(void (*func)(void *), void *data)
 {
+	struct lowcore *lc = pcpu_devices->lowcore;
+
+	if (pcpu_devices[0].address == stap())
+		lc = &S390_lowcore;
+
 	pcpu_delegate(&pcpu_devices[0], func, data,
-		      pcpu_devices->lowcore->panic_stack -
-		      PANIC_FRAME_OFFSET + PAGE_SIZE);
+		      lc->panic_stack - PANIC_FRAME_OFFSET + PAGE_SIZE);
 }
 
 int smp_find_processor_id(u16 address)

[PATCH 4.9 40/44] nvmet-rdma: Add unlikely for response allocated check

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Israel Rukshin <israelr@mellanox.com>

commit ad1f824948e4ed886529219cf7cd717d078c630d upstream.

Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Raju  Rangoju <rajur@chelsio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/nvme/target/rdma.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/nvme/target/rdma.c
+++ b/drivers/nvme/target/rdma.c
@@ -189,7 +189,7 @@ nvmet_rdma_put_rsp(struct nvmet_rdma_rsp
 {
 	unsigned long flags;
 
-	if (rsp->allocated) {
+	if (unlikely(rsp->allocated)) {
 		kfree(rsp);
 		return;
 	}

[PATCH 4.9 41/44] nvmet-rdma: fix null dereference under heavy load

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Raju Rangoju <rajur@chelsio.com>

commit 5cbab6303b4791a3e6713dfe2c5fda6a867f9adc upstream.

Under heavy load if we don't have any pre-allocated rsps left, we
dynamically allocate a rsp, but we are not actually allocating memory
for nvme_completion (rsp->req.rsp). In such a case, accessing pointer
fields (req->rsp->status) in nvmet_req_init() will result in crash.

To fix this, allocate the memory for nvme_completion by calling
nvmet_rdma_alloc_rsp()

Fixes: 8407879c("nvmet-rdma:fix possible bogus dereference under heavy load")

Cc: <stable@vger.kernel.org>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/nvme/target/rdma.c |   15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

--- a/drivers/nvme/target/rdma.c
+++ b/drivers/nvme/target/rdma.c
@@ -137,6 +137,10 @@ static void nvmet_rdma_recv_done(struct
 static void nvmet_rdma_read_data_done(struct ib_cq *cq, struct ib_wc *wc);
 static void nvmet_rdma_qp_event(struct ib_event *event, void *priv);
 static void nvmet_rdma_queue_disconnect(struct nvmet_rdma_queue *queue);
+static void nvmet_rdma_free_rsp(struct nvmet_rdma_device *ndev,
+				struct nvmet_rdma_rsp *r);
+static int nvmet_rdma_alloc_rsp(struct nvmet_rdma_device *ndev,
+				struct nvmet_rdma_rsp *r);
 
 static struct nvmet_fabrics_ops nvmet_rdma_ops;
 
@@ -175,9 +179,17 @@ nvmet_rdma_get_rsp(struct nvmet_rdma_que
 	spin_unlock_irqrestore(&queue->rsps_lock, flags);
 
 	if (unlikely(!rsp)) {
-		rsp = kmalloc(sizeof(*rsp), GFP_KERNEL);
+		int ret;
+
+		rsp = kzalloc(sizeof(*rsp), GFP_KERNEL);
 		if (unlikely(!rsp))
 			return NULL;
+		ret = nvmet_rdma_alloc_rsp(queue->dev, rsp);
+		if (unlikely(ret)) {
+			kfree(rsp);
+			return NULL;
+		}
+
 		rsp->allocated = true;
 	}
 
@@ -190,6 +202,7 @@ nvmet_rdma_put_rsp(struct nvmet_rdma_rsp
 	unsigned long flags;
 
 	if (unlikely(rsp->allocated)) {
+		nvmet_rdma_free_rsp(rsp->queue->dev, rsp);
 		kfree(rsp);
 		return;
 	}

[PATCH 4.9 42/44] f2fs: read page index before freeing

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pan Bian <bianpan2016@163.com>

commit 0ea295dd853e0879a9a30ab61f923c26be35b902 upstream.

The function truncate_node frees the page with f2fs_put_page. However,
the page index is read after that. So, the patch reads the index before
freeing the page.

Fixes: bf39c00a9a7f ("f2fs: drop obsolete node page when it is truncated")
Cc: <stable@vger.kernel.org>
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/f2fs/node.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/fs/f2fs/node.c
+++ b/fs/f2fs/node.c
@@ -656,6 +656,7 @@ static void truncate_node(struct dnode_o
 {
 	struct f2fs_sb_info *sbi = F2FS_I_SB(dn->inode);
 	struct node_info ni;
+	pgoff_t index;
 
 	get_node_info(sbi, dn->nid, &ni);
 	if (dn->inode->i_blocks == 0) {
@@ -678,10 +679,11 @@ invalidate:
 	clear_node_page_dirty(dn->node_page);
 	set_sbi_flag(sbi, SBI_IS_DIRTY);
 
+	index = dn->node_page->index;
 	f2fs_put_page(dn->node_page, 1);
 
 	invalidate_mapping_pages(NODE_MAPPING(sbi),
-			dn->node_page->index, dn->node_page->index);
+			index, index);
 
 	dn->node_page = NULL;
 	trace_f2fs_truncate_node(dn->inode, dn->nid, ni.blk_addr);

[PATCH 4.9 43/44] btrfs: fix error handling in btrfs_dev_replace_start

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Mahoney <jeffm@suse.com>

commit 5c06147128fbbdf7a84232c5f0d808f53153defe upstream.

When we fail to start a transaction in btrfs_dev_replace_start, we leave
dev_replace->replace_start set to STARTED but clear ->srcdev and
->tgtdev.  Later, that can result in an Oops in
btrfs_dev_replace_progress when having state set to STARTED or SUSPENDED
implies that ->srcdev is valid.

Also fix error handling when the state is already STARTED or SUSPENDED
while starting.  That, too, will clear ->srcdev and ->tgtdev even though
it doesn't own them.  This should be an impossible case to hit since we
should be protected by the BTRFS_FS_EXCL_OP bit being set.  Let's add an
ASSERT there while we're at it.

Fixes: e93c89c1aaaaa (Btrfs: add new sources for device replace code)
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/dev-replace.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/fs/btrfs/dev-replace.c
+++ b/fs/btrfs/dev-replace.c
@@ -350,6 +350,7 @@ int btrfs_dev_replace_start(struct btrfs
 		break;
 	case BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED:
 	case BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED:
+		ASSERT(0);
 		ret = BTRFS_IOCTL_DEV_REPLACE_RESULT_ALREADY_STARTED;
 		goto leave;
 	}
@@ -394,6 +395,10 @@ int btrfs_dev_replace_start(struct btrfs
 	if (IS_ERR(trans)) {
 		ret = PTR_ERR(trans);
 		btrfs_dev_replace_lock(dev_replace, 1);
+		dev_replace->replace_state =
+			BTRFS_IOCTL_DEV_REPLACE_STATE_NEVER_STARTED;
+		dev_replace->srcdev = NULL;
+		dev_replace->tgtdev = NULL;
 		goto leave;
 	}
 
@@ -415,8 +420,6 @@ int btrfs_dev_replace_start(struct btrfs
 	return ret;
 
 leave:
-	dev_replace->srcdev = NULL;
-	dev_replace->tgtdev = NULL;
 	btrfs_dev_replace_unlock(dev_replace, 1);
 	btrfs_destroy_dev_replace_tgtdev(fs_info, tgt_device);
 	return ret;

[PATCH 4.9 44/44] btrfs: dev-replace: go back to suspended state if target device is missing

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anand Jain <anand.jain@oracle.com>

commit 0d228ece59a35a9b9e8ff0d40653234a6d90f61e upstream.

At the time of forced unmount we place the running replace to
BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED state, so when the system comes
back and expect the target device is missing.

Then let the replace state continue to be in
BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED state instead of
BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED as there isn't any matching scrub
running as part of replace.

Fixes: e93c89c1aaaa ("Btrfs: add new sources for device replace code")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/dev-replace.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/btrfs/dev-replace.c
+++ b/fs/btrfs/dev-replace.c
@@ -787,6 +787,8 @@ int btrfs_resume_dev_replace_async(struc
 			   "cannot continue dev_replace, tgtdev is missing");
 		btrfs_info(fs_info,
 			   "you may cancel the operation after 'mount -o degraded'");
+		dev_replace->replace_state =
+					BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED;
 		btrfs_dev_replace_unlock(dev_replace, 1);
 		return 0;
 	}

Re: [PATCH 4.9 08/44] mmc: Kconfig: Enable CONFIG_MMC_SDHCI_IO_ACCESSORS

[Georgi Djakov]

On 1/29/19 13:36, Greg Kroah-Hartman wrote:
> 4.9-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> commit 99d570da309813f67e9c741edeff55bafc6c1d5e upstream.
> 
> Enable CONFIG_MMC_SDHCI_IO_ACCESSORS so that SDHC controller specific
> register read and write APIs, if registered, can be used.
> 
> Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org>
> Acked-by: Adrian Hunter <adrian.hunter@intel.com>
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> Cc: Koen Vandeputte <koen.vandeputte@ncentric.com>
> Cc: Loic Poulain <loic.poulain@linaro.org>
> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
>  drivers/mmc/host/Kconfig |    1 +
>  1 file changed, 1 insertion(+)
> 
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -399,6 +399,7 @@ config MMC_SDHCI_MSM
>  	tristate "Qualcomm SDHCI Controller Support"
>  	depends on ARCH_QCOM || (ARM && COMPILE_TEST)
>  	depends on MMC_SDHCI_PLTFM
> +	select MMC_SDHCI_IO_ACCESSORS
>  	help
>  	  This selects the Secure Digital Host Controller Interface (SDHCI)
>  	  support present in Qualcomm SOCs. The controller supports


This patch is not needed in 4.9-stable, but only in 4.14-stable (where
it is queued already). Please drop it from 4.9.

Thanks,
Georgi

Re: [PATCH 4.9 08/44] mmc: Kconfig: Enable CONFIG_MMC_SDHCI_IO_ACCESSORS

[Greg Kroah-Hartman]

On Tue, Jan 29, 2019 at 02:54:24PM +0200, Georgi Djakov wrote:
> On 1/29/19 13:36, Greg Kroah-Hartman wrote:
> > 4.9-stable review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > commit 99d570da309813f67e9c741edeff55bafc6c1d5e upstream.
> > 
> > Enable CONFIG_MMC_SDHCI_IO_ACCESSORS so that SDHC controller specific
> > register read and write APIs, if registered, can be used.
> > 
> > Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org>
> > Acked-by: Adrian Hunter <adrian.hunter@intel.com>
> > Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> > Cc: Koen Vandeputte <koen.vandeputte@ncentric.com>
> > Cc: Loic Poulain <loic.poulain@linaro.org>
> > Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
> > Signed-off-by: Sasha Levin <sashal@kernel.org>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > ---
> >  drivers/mmc/host/Kconfig |    1 +
> >  1 file changed, 1 insertion(+)
> > 
> > --- a/drivers/mmc/host/Kconfig
> > +++ b/drivers/mmc/host/Kconfig
> > @@ -399,6 +399,7 @@ config MMC_SDHCI_MSM
> >  	tristate "Qualcomm SDHCI Controller Support"
> >  	depends on ARCH_QCOM || (ARM && COMPILE_TEST)
> >  	depends on MMC_SDHCI_PLTFM
> > +	select MMC_SDHCI_IO_ACCESSORS
> >  	help
> >  	  This selects the Secure Digital Host Controller Interface (SDHCI)
> >  	  support present in Qualcomm SOCs. The controller supports
> 
> 
> This patch is not needed in 4.9-stable, but only in 4.14-stable (where
> it is queued already). Please drop it from 4.9.

Now dropped, thanks for letting me know.

greg k-h

Re: [PATCH 4.9 00/44] 4.9.154-stable review

[Guenter Roeck]

On Tue, Jan 29, 2019 at 12:35:55PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.154 release.
> There are 44 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Jan 31 11:31:22 UTC 2019.
> Anything received after that time might be too late.
> 

fs/cifs/connect.c: In function 'zero_credits':
fs/cifs/connect.c:527:34: error: 'struct TCP_Server_Info' has no member named 'echo_credits'
fs/cifs/connect.c:527:57: error: 'struct TCP_Server_Info' has no member named 'oplock_credits'

Seen with:

arm:s3c2410_defconfig 
arm:nhk8815_defconfig 
arm:cm_x2xx_defconfig 
ia64:defconfig 
m68k:defconfig 
m68k:sun3_defconfig 
microblaze:mmu_defconfig 
mips:defconfig 
mips:nlm_xlp_defconfig 
parisc:defconfig 
parisc:generic-32bit_defconfig 
parisc:a500_defconfig 
powerpc:defconfig 
powerpc:ppc64e_defconfig 
powerpc:ppc6xx_defconfig 
s390:performance_defconfig
tile:tilegx_defconfig 

Guenter

Re: [PATCH 4.9 00/44] 4.9.154-stable review

[Greg Kroah-Hartman]

On Tue, Jan 29, 2019 at 11:02:20AM -0800, Guenter Roeck wrote:
> On Tue, Jan 29, 2019 at 12:35:55PM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.9.154 release.
> > There are 44 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Thu Jan 31 11:31:22 UTC 2019.
> > Anything received after that time might be too late.
> > 
> 
> fs/cifs/connect.c: In function 'zero_credits':
> fs/cifs/connect.c:527:34: error: 'struct TCP_Server_Info' has no member named 'echo_credits'
> fs/cifs/connect.c:527:57: error: 'struct TCP_Server_Info' has no member named 'oplock_credits'
> 
> Seen with:
> 
> arm:s3c2410_defconfig 
> arm:nhk8815_defconfig 
> arm:cm_x2xx_defconfig 
> ia64:defconfig 
> m68k:defconfig 
> m68k:sun3_defconfig 
> microblaze:mmu_defconfig 
> mips:defconfig 
> mips:nlm_xlp_defconfig 
> parisc:defconfig 
> parisc:generic-32bit_defconfig 
> parisc:a500_defconfig 
> powerpc:defconfig 
> powerpc:ppc64e_defconfig 
> powerpc:ppc6xx_defconfig 
> s390:performance_defconfig
> tile:tilegx_defconfig 

Ugh, this is due to CONFIG_CIFS_SMB2 not being enabled there.  But it's
removed in newer kernels.  Let me see if I should just drop the
offending patch, give me a bit...

thanks for the quick response.

greg k-h

Re: [PATCH 4.9 00/44] 4.9.154-stable review

[Greg Kroah-Hartman]

On Tue, Jan 29, 2019 at 12:35:55PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.154 release.
> There are 44 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Jan 31 11:31:22 UTC 2019.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.154-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y

Released a -rc2 to fix a CIFS build bug.
 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.154-rc2.gz

Re: [PATCH 4.9 00/44] 4.9.154-stable review

[Greg Kroah-Hartman]

On Tue, Jan 29, 2019 at 08:26:24PM +0100, Greg Kroah-Hartman wrote:
> On Tue, Jan 29, 2019 at 11:02:20AM -0800, Guenter Roeck wrote:
> > On Tue, Jan 29, 2019 at 12:35:55PM +0100, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 4.9.154 release.
> > > There are 44 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> > > 
> > > Responses should be made by Thu Jan 31 11:31:22 UTC 2019.
> > > Anything received after that time might be too late.
> > > 
> > 
> > fs/cifs/connect.c: In function 'zero_credits':
> > fs/cifs/connect.c:527:34: error: 'struct TCP_Server_Info' has no member named 'echo_credits'
> > fs/cifs/connect.c:527:57: error: 'struct TCP_Server_Info' has no member named 'oplock_credits'
> > 
> > Seen with:
> > 
> > arm:s3c2410_defconfig 
> > arm:nhk8815_defconfig 
> > arm:cm_x2xx_defconfig 
> > ia64:defconfig 
> > m68k:defconfig 
> > m68k:sun3_defconfig 
> > microblaze:mmu_defconfig 
> > mips:defconfig 
> > mips:nlm_xlp_defconfig 
> > parisc:defconfig 
> > parisc:generic-32bit_defconfig 
> > parisc:a500_defconfig 
> > powerpc:defconfig 
> > powerpc:ppc64e_defconfig 
> > powerpc:ppc6xx_defconfig 
> > s390:performance_defconfig
> > tile:tilegx_defconfig 
> 
> Ugh, this is due to CONFIG_CIFS_SMB2 not being enabled there.  But it's
> removed in newer kernels.  Let me see if I should just drop the
> offending patch, give me a bit...

I've just dropped the patch now and pushed out a -rc2.

thanks,

greg k-h

Re: [PATCH 4.9 00/44] 4.9.154-stable review

[shuah]

On 1/29/19 12:43 PM, Greg Kroah-Hartman wrote:
> On Tue, Jan 29, 2019 at 08:26:24PM +0100, Greg Kroah-Hartman wrote:
>> On Tue, Jan 29, 2019 at 11:02:20AM -0800, Guenter Roeck wrote:
>>> On Tue, Jan 29, 2019 at 12:35:55PM +0100, Greg Kroah-Hartman wrote:
>>>> This is the start of the stable review cycle for the 4.9.154 release.
>>>> There are 44 patches in this series, all will be posted as a response
>>>> to this one.  If anyone has any issues with these being applied, please
>>>> let me know.
>>>>
>>>> Responses should be made by Thu Jan 31 11:31:22 UTC 2019.
>>>> Anything received after that time might be too late.
>>>>
>>>
>>> fs/cifs/connect.c: In function 'zero_credits':
>>> fs/cifs/connect.c:527:34: error: 'struct TCP_Server_Info' has no member named 'echo_credits'
>>> fs/cifs/connect.c:527:57: error: 'struct TCP_Server_Info' has no member named 'oplock_credits'
>>>
>>> Seen with:
>>>
>>> arm:s3c2410_defconfig
>>> arm:nhk8815_defconfig
>>> arm:cm_x2xx_defconfig
>>> ia64:defconfig
>>> m68k:defconfig
>>> m68k:sun3_defconfig
>>> microblaze:mmu_defconfig
>>> mips:defconfig
>>> mips:nlm_xlp_defconfig
>>> parisc:defconfig
>>> parisc:generic-32bit_defconfig
>>> parisc:a500_defconfig
>>> powerpc:defconfig
>>> powerpc:ppc64e_defconfig
>>> powerpc:ppc6xx_defconfig
>>> s390:performance_defconfig
>>> tile:tilegx_defconfig
>>
>> Ugh, this is due to CONFIG_CIFS_SMB2 not being enabled there.  But it's
>> removed in newer kernels.  Let me see if I should just drop the
>> offending patch, give me a bit...
> 
> I've just dropped the patch now and pushed out a -rc2.
> 

rc2 compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 4.9 00/44] 4.9.154-stable review

[Jon Hunter]

On 29/01/2019 11:35, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.154 release.
> There are 44 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Jan 31 11:31:22 UTC 2019.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.154-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
I see you have posted a rc2, but for rc1 all tests are passing for
Tegra. Should have results for rc2 tonight.

Test results for stable-v4.9:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    14 tests:	14 pass, 0 fail

Linux version:	4.9.154-rc1-g5c2f707
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.9 00/44] 4.9.154-stable review

[Naresh Kamboju]

On Tue, 29 Jan 2019 at 17:21, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.9.154 release.
> There are 44 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Jan 31 11:31:22 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.154-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

RC2 report.

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

NOTE:
-----
LTP upgrade to 20190115 and found fanotify01 test failed
and LTP syscall test case  bind03 getting pass now on 4.9 and 4.4
version kernel.

fanotify01 failed on hikey and dragonboard410c arm64 boards all kernel versions
fanotify01.c:256: FAIL: got event: mask=2 (expected 20) pid=2756 fd=9
https://bugs.linaro.org/show_bug.cgi?id=4261

Summary
------------------------------------------------------------------------

kernel: 4.9.154-rc2
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: 6674590d15d227f4096f193f8e6fb737ef41e89f
git describe: v4.9.153-43-g6674590d15d2
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.153-43-g6674590d15d2

No regressions (compared to build v4.9.153)


Fixes (compared to build v4.9.153)
------------------------------------------------------------------------
LTP syscalls test case "bind03" fixed and getting pass on all devices.


Ran 21980 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* boot
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* ltp-cve-tests
* ltp-open-posix-tests
* spectre-meltdown-checker-test
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.9 00/44] 4.9.154-stable review

[Guenter Roeck]

On Tue, Jan 29, 2019 at 12:35:55PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.154 release.
> There are 44 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Jan 31 11:31:22 UTC 2019.
> Anything received after that time might be too late.
> 

For v4.9.153-43-g6674590d15d2:

Build results:
	total: 172 pass: 172 fail: 0
Qemu test results:
	total: 315 pass: 315 fail: 0

Guenter

Re: [PATCH 4.9 00/44] 4.9.154-stable review

[Jon Hunter]

On 30/01/2019 12:50, Jon Hunter wrote:
> 
> On 29/01/2019 11:35, Greg Kroah-Hartman wrote:
>> This is the start of the stable review cycle for the 4.9.154 release.
>> There are 44 patches in this series, all will be posted as a response
>> to this one.  If anyone has any issues with these being applied, please
>> let me know.
>>
>> Responses should be made by Thu Jan 31 11:31:22 UTC 2019.
>> Anything received after that time might be too late.
>>
>> The whole patch series can be found in one patch at:
>> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.154-rc1.gz
>> or in the git tree and branch at:
>> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
>> and the diffstat can be found below.
>>
>> thanks,
>>
>> greg k-h
> I see you have posted a rc2, but for rc1 all tests are passing for
> Tegra. Should have results for rc2 tonight.
> 
> Test results for stable-v4.9:
>     8 builds:	8 pass, 0 fail
>     16 boots:	16 pass, 0 fail
>     14 tests:	14 pass, 0 fail
> 
> Linux version:	4.9.154-rc1-g5c2f707
> Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
>                 tegra210-p2371-2180, tegra30-cardhu-a04

To confirm, rc2 looks fine as well ...

Test results for stable-v4.9:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    14 tests:	14 pass, 0 fail

Linux version:	4.9.154-rc2-g6674590
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic