From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-10.8 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI, MENTIONS_GIT_HOSTING,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 03B45C4338F for ; Fri, 23 Jul 2021 11:56:42 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id D059760E8C for ; Fri, 23 Jul 2021 11:56:41 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234765AbhGWLQG (ORCPT ); Fri, 23 Jul 2021 07:16:06 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56694 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234451AbhGWLQE (ORCPT ); Fri, 23 Jul 2021 07:16:04 -0400 Received: from mail-ed1-x52e.google.com (mail-ed1-x52e.google.com [IPv6:2a00:1450:4864:20::52e]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 924F4C06175F for ; Fri, 23 Jul 2021 04:56:36 -0700 (PDT) Received: by mail-ed1-x52e.google.com with SMTP id b7so1442872edu.3 for ; Fri, 23 Jul 2021 04:56:36 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=mime-version:references:in-reply-to:from:date:message-id:subject:to :cc; bh=CDKN2PTgoW3cqOVTQinhUhevH8jQpimum69eKmuOyZE=; b=iAmox1aVJQekzSPAs88nKjkSnxgBy6akxTvGpFIKEbXco4cprL4oU5hlbsk+4dGbtl 76wYuy0crDrnfbXvqay7SYy2sQiDuuu3eVgDd+3hZYRcqXoVViBCsV6rKTC4mIUXchHv DwKaIKQeqkl+lH1rUQERUH/VEkTmXcnqesagQG/PlaWE4uYSVvMRMm85k7eeOr4oM3aM /Qtws+PLFrSEp2LuG8wQA4p3GVewthS4/RjgjqIEgwGxd9nrCH9Laq7Ld3GImJ1ZxzjW jcKSFruM7gnWpRidNa4wRurQlXaEwLHhZuhQkXzgKId0I4hBGWt6K4e2inpHeGvPWmKv z9pg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:references:in-reply-to:from:date :message-id:subject:to:cc; bh=CDKN2PTgoW3cqOVTQinhUhevH8jQpimum69eKmuOyZE=; b=hWyx7oatm3hZr7MY8VYrsw3m85btPSZbO3w/hFXxVIdgsKY8sujPqLsmFnzRHz7/oO 3+LoEkif3nlhGdkDk0YLV0z2Tsq7ZxSUnOFHmDOS+Yk5Ntf8kOgARgjnmQqb0wl431A1 1KhkMJsJVxtW3MgzBR8RpzgIgWD/+RM8ysMl2sOMsNqcmoSPSZwUNjlZviyTAO+9t6sn q48yC2XPIv26MIFnr4caEsVztiPVk8CXTWHKC0SUdMc5ZblvboaUyyRvQoQ4BleR0yjM SOyl8hC9BKEEGHCwyo0i51zpDb7jB8ymzLJ9FKB6tTUapf83BGEH7BJOG40J57tTX1c4 wUBw== X-Gm-Message-State: AOAM530dVsQnZ29SmUhfPU4rhFw0JLS0caK+K6G0tJ+ZSq32LPjmo4sx 256PxRvsNCScBoVYsYNy5osRT5paNEde0VMhG1BRgw== X-Google-Smtp-Source: ABdhPJzzQ6+RW6yQhz9LvWTHKmr0utRjVepk24WHjmXjGl+g58+5osezLr07TkgyJJX4pwHFZWxX9OKoxFsUEhgsfog= X-Received: by 2002:aa7:cc83:: with SMTP id p3mr1200209edt.365.1627041394312; Fri, 23 Jul 2021 04:56:34 -0700 (PDT) MIME-Version: 1.0 References: <20210722155628.371356843@linuxfoundation.org> In-Reply-To: <20210722155628.371356843@linuxfoundation.org> From: Naresh Kamboju Date: Fri, 23 Jul 2021 17:26:22 +0530 Message-ID: Subject: Re: [PATCH 5.13 000/156] 5.13.5-rc1 review To: Greg Kroah-Hartman Cc: open list , Linus Torvalds , Andrew Morton , Guenter Roeck , Shuah Khan , patches@kernelci.org, lkft-triage@lists.linaro.org, Pavel Machek , Jon Hunter , Florian Fainelli , linux-stable , linux-block , linux-fsdevel@vger.kernel.org, LTP List , Arnd Bergmann Content-Type: text/plain; charset="UTF-8" Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Thu, 22 Jul 2021 at 22:17, Greg Kroah-Hartman wrote: > > This is the start of the stable review cycle for the 5.13.5 release. > There are 156 patches in this series, all will be posted as a response > to this one. If anyone has any issues with these being applied, please > let me know. > > Responses should be made by Sat, 24 Jul 2021 15:56:00 +0000. > Anything received after that time might be too late. > > The whole patch series can be found in one patch at: > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.13.5-rc1.gz > or in the git tree and branch at: > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.13.y > and the diffstat can be found below. > > thanks, > > greg k-h The following error is due to SATA drive format failing with arm64 64k-page size ( CONFIG_ARM64_64K_PAGES=y ) kernel. while running LTP syscalls test suite on running 5.13.3 and 5.13.5-rc1 kernel. First it was noticed on the stable-rc 5.13.3-rc2 kernel. Whereas 64bit kernel and 32bit kernel pass with 4K page size. Initially, I thought it could be a Hard drive fault but it is reproducible on other devices but not always. Which is a blocker to bisect the problem. The steps to reproduce: - Boot arm64 juno device with 64k page stable-rc 5.13 kernel Image [1] - CONFIG_ARM64_64K_PAGES=y - format connected SATA drives and mount /scratch - Use the mounted /scratch for LTP runs to create and delete files from this - cd /opt/ltp - ./runltp -d /scratch -f syscalls error log: ------------- tst_device.c:89: TINFO: Found free device 0 '/dev/loop0' tst_test.c:889: TINFO: Formatting /dev/loop0 with ext2 opts='' extra opts='' mke2fs 1.43.8 (1-Jan-2018) [ 776.850122] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 776.874645] ata1.00: configured for UDMA/100 [ 776.879042] ata1: EH complete [ 776.912010] ata1.00: exception Emask 0x20 SAct 0xc0 SErr 0x0 action 0x6 frozen [ 776.919299] ata1.00: irq_stat 0x00020002, PCI target abort while transferring data [ 776.926983] ata1.00: failed command: WRITE FPDMA QUEUED [ 776.932263] ata1.00: cmd 61/08:30:00:10:84/00:00:06:00:00/40 tag 6 ncq dma 4096 out [ 776.932263] res e6/ff:00:00:00:00/00:00:00:00:e6/00 Emask 0x22 (host bus error) [ 776.948089] ata1.00: status: { Busy } [ 776.951766] ata1.00: error: { ICRC UNC AMNF IDNF ABRT } [ 776.957042] ata1.00: failed command: WRITE FPDMA QUEUED [ 776.962311] ata1.00: cmd 61/10:38:a8:6f:c4/00:00:06:00:00/40 tag 7 ncq dma 8192 out [ 776.962311] res e7/ff:00:00:00:00/00:00:00:00:e7/00 Emask 0x22 (host bus error) [ 776.978139] ata1.00: status: { Busy } [ 776.981843] ata1.00: error: { ICRC UNC AMNF IDNF ABRT } [ 776.987128] ata1: hard resetting link [ 779.158340] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 779.182864] ata1.00: configured for UDMA/100 [ 779.187307] ata1: EH complete [ 779.204050] ata1.00: exception Emask 0x20 SAct 0x9000000 SErr 0x0 action 0x6 frozen [ 779.211764] ata1.00: irq_stat 0x00020002, PCI target abort while transferring data [ 779.219433] ata1.00: failed command: WRITE FPDMA QUEUED [ 779.224749] ata1.00: cmd 61/10:c0:a8:6f:c4/00:00:06:00:00/40 tag 24 ncq dma 8192 out [ 779.224749] res f8/ff:00:00:00:00/00:00:00:00:f8/00 Emask 0x22 (host bus error) [ 779.240718] ata1.00: status: { Busy } [ 779.244430] ata1.00: error: { ICRC UNC AMNF IDNF ABRT } [ 779.249747] ata1.00: failed command: WRITE FPDMA QUEUED [ 779.255146] ata1.00: cmd 61/08:d8:00:10:84/00:00:06:00:00/40 tag 27 ncq dma 4096 out [ 779.255146] res fb/ff:00:00:00:00/00:00:00:00:fb/00 Emask 0x22 (host bus error) [ 779.271056] ata1.00: status: { Busy } [ 779.274740] ata1.00: error: { ICRC UNC AMNF IDNF ABRT } [ 779.280000] ata1: hard resetting link [ 781.450339] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 781.474959] ata1.00: configured for UDMA/100 [ 781.479351] ata1: EH complete [ 781.496155] ata1.00: NCQ disabled due to excessive errors [ 781.501604] ata1.00: exception Emask 0x20 SAct 0x300 SErr 0x0 action 0x6 frozen [ 781.508957] ata1.00: irq_stat 0x00020002, PCI target abort while transferring data [ 781.516561] ata1.00: failed command: WRITE FPDMA QUEUED [ 781.521812] ata1.00: cmd 61/10:40:a8:6f:c4/00:00:06:00:00/40 tag 8 ncq dma 8192 out [ 781.521812] res e8/ff:00:00:00:00/00:00:00:00:e8/00 Emask 0x22 (host bus error) [ 781.537607] ata1.00: status: { Busy } [ 781.541287] ata1.00: error: { ICRC UNC AMNF IDNF ABRT } [ 781.546547] ata1.00: failed command: WRITE FPDMA QUEUED [ 781.551796] ata1.00: cmd 61/08:48:00:10:84/00:00:06:00:00/40 tag 9 ncq dma 4096 out [ 781.551796] res e9/ff:00:00:00:00/00:00:00:00:e9/00 Emask 0x22 (host bus error) [ 781.567587] ata1.00: status: { Busy } [ 781.571270] ata1.00: error: { ICRC UNC AMNF IDNF ABRT } [ 781.576528] ata1: hard resetting link [ 783.750335] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 783.774957] ata1.00: configured for UDMA/100 [ 783.779349] ata1: EH complete [ 783.796099] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 783.803199] ata1.00: irq_stat 0x00020002, PCI target abort while transferring data [ 783.810812] ata1.00: failed command: WRITE DMA [ 783.815281] ata1.00: cmd ca/00:10:a8:6f:c4/00:00:00:00:00/e6 tag 11 dma 8192 out [ 783.815281] res eb/ff:00:00:00:00/00:00:00:00:eb/00 Emask 0x22 (host bus error) [ 783.830815] ata1.00: status: { Busy } [ 783.834497] ata1.00: error: { ICRC UNC AMNF IDNF ABRT } <> move_mount01.c:70: TPASS: Flag MO[ 844.176510] EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem VE_MOUNT_F_AUTOMOUNTS: move_mount() passed [ 844.194668] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 844.236136] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 844.243226] ata1.00: irq_stat 0x00020002, PCI target abort while transferring data [ 844.250836] ata1.00: failed command: WRITE DMA [ 844.255310] ata1.00: cmd ca/00:10:a8:98:c4/00:00:00:00:00/e6 tag 19 dma 8192 out [ 844.255310] res f3/ff:00:00:00:00/00:00:00:00:f3/00 Emask 0x22 (host bus error) [ 844.270844] ata1.00: status: { Busy } [ 844.274536] ata1.00: error: { ICRC UNC AMNF IDNF ABRT } [ 844.279797] ata1: hard resetting link [ 846.450150] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 846.474681] ata1.00: configured for UDMA/100 [ 846.479031] ata1: EH complete [ 846.500082] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 846.507202] ata1.00: irq_stat 0x00020002, PCI target abort while transferring data [ 846.514840] ata1.00: failed command: WRITE DMA [ 846.519314] ata1.00: cmd ca/00:10:a8:98:c4/00:00:00:00:00/e6 tag 19 dma 8192 out [ 846.519314] res f3/ff:00:00:00:00/00:00:00:00:f3/00 Emask 0x22 (host bus error) [ 846.534870] ata1.00: status: { Busy } [ 846.538563] ata1.00: error: { ICRC UNC AMNF IDNF ABRT } [ 846.543874] ata1: hard resetting link [ 848.717983] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 848.742568] ata1.00: configured for UDMA/100 [ 848.746902] ata1: EH complete [ 848.768079] ata1: limiting SATA link speed to 1.5 Gbps [ 848.773279] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 848.780390] ata1.00: irq_stat 0x00020002, PCI target abort while transferring data [ 848.788015] ata1.00: failed command: WRITE DMA [ 848.792493] ata1.00: cmd ca/00:10:a8:98:c4/00:00:00:00:00/e6 tag 17 dma 8192 out [ 848.792493] res f1/ff:00:00:00:00/00:00:00:00:f1/00 Emask 0x22 (host bus error) [ 848.808062] ata1.00: status: { Busy } [ 848.811731] ata1.00: error: { ICRC UNC AMNF IDNF ABRT } [ 848.817013] ata1: hard resetting link [ 850.989969] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 856.023974] ata1.00: qc timeout (cmd 0xec) [ 856.028112] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5) [ 856.034231] ata1.00: revalidation failed (errno=-5) [ 856.039143] ata1: hard resetting link [ 858.210059] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 858.234811] ata1.00: configured for UDMA/100 [ 858.239135] ata1: EH complete [ 858.260066] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 858.267172] ata1.00: irq_stat 0x00020002, PCI target abort while transferring data [ 858.274799] ata1.00: failed command: WRITE DMA [ 858.279271] ata1.00: cmd ca/00:10:a8:98:c4/00:00:00:00:00/e6 tag 16 dma 8192 out [ 858.279271] res f0/ff:00:00:00:00/00:00:00:00:f0/00 Emask 0x22 (host bus error) [ 858.294825] ata1.00: status: { Busy } [ 858.298519] ata1.00: error: { ICRC UNC AMNF IDNF ABRT } [ 858.303799] ata1: hard resetting link [ 860.473957] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 865.495874] ata1.00: qc timeout (cmd 0xec) [ 865.500007] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5) [ 865.506145] ata1.00: revalidation failed (errno=-5) [ 865.511061] ata1: hard resetting link [ 867.681960] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 867.706586] ata1.00: configured for UDMA/100 [ 867.710921] ata1: EH complete [ 867.755977] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 867.763068] ata1.00: irq_stat 0x00020002, PCI target abort while transferring data [ 867.770697] ata1.00: failed command: WRITE DMA [ 867.775176] ata1.00: cmd ca/00:10:c0:98:c4/00:00:00:00:00/e6 tag 17 dma 8192 out [ 867.775176] res f1/ff:00:00:00:00/00:00:00:00:f1/00 Emask 0x22 (host bus error) [ 867.790712] ata1.00: status: { Busy } [ 867.794397] ata1.00: error: { ICRC UNC AMNF IDNF ABRT } [ 867.799653] ata1: hard resetting link [ 869.970127] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 875.224033] ata1.00: qc timeout (cmd 0xec) [ 875.228193] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5) [ 875.234314] ata1.00: revalidation failed (errno=-5) [ 875.239227] ata1: hard resetting link [ 877.410117] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 877.434747] ata1.00: configured for UDMA/100 [ 877.439076] ata1: EH complete [ 877.463959] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 877.471050] ata1.00: irq_stat 0x00020002, PCI target abort while transferring data [ 877.478680] ata1.00: failed command: WRITE DMA [ 877.483158] ata1.00: cmd ca/00:10:c0:98:c4/00:00:00:00:00/e6 tag 19 dma 8192 out [ 877.483158] res f3/ff:00:00:00:00/00:00:00:00:f3/00 Emask 0x22 (host bus error) [ 877.498731] ata1.00: status: { Busy } [ 877.502425] ata1.00: error: { ICRC UNC AMNF IDNF ABRT } [ 877.507705] ata1: hard resetting link [ 879.677937] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 884.695839] ata1.00: qc timeout (cmd 0xec) [ 884.699994] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5) [ 884.706114] ata1.00: revalidation failed (errno=-5) [ 884.711046] ata1: hard resetting link [ 886.881932] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 886.906633] ata1.00: configured for UDMA/100 [ 886.910979] ata1: EH complete [ 886.932038] ata1.00: limiting speed to UDMA/66:PIO4 [ 886.936980] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 886.944092] ata1.00: irq_stat 0x00020002, PCI target abort while transferring data [ 886.951703] ata1.00: failed command: WRITE DMA [ 886.956193] ata1.00: cmd ca/00:10:c0:98:c4/00:00:00:00:00/e6 tag 19 dma 8192 out [ 886.956193] res f3/ff:00:00:00:00/00:00:00:00:f3/00 Emask 0x22 (host bus error) [ 886.971753] ata1.00: status: { Busy } [ 886.975461] ata1.00: error: { ICRC UNC AMNF IDNF ABRT } [ 886.980745] ata1: hard resetting link [ 889.153927] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 894.167843] ata1.00: qc timeout (cmd 0xec) [ 894.171975] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5) [ 894.178115] ata1.00: revalidation failed (errno=-5) [ 894.183032] ata1: hard resetting link [ 896.353928] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 896.378602] ata1.00: configured for UDMA/66 [ 896.382850] ata1: EH complete [ 896.404020] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 896.411126] ata1.00: irq_stat 0x00020002, PCI target abort while transferring data [ 896.418751] ata1.00: failed command: WRITE DMA [ 896.423222] ata1.00: cmd ca/00:10:c0:98:c4/00:00:00:00:00/e6 tag 19 dma 8192 out [ 896.423222] res f3/ff:00:00:00:00/00:00:00:00:f3/00 Emask 0x22 (host bus error) [ 896.438775] ata1.00: status: { Busy } [ 896.442468] ata1.00: error: { ICRC UNC AMNF IDNF ABRT } [ 896.447747] ata1: hard resetting link [ 898.618002] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 903.639915] ata1.00: qc timeout (cmd 0xec) [ 903.644051] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5) [ 903.650170] ata1.00: revalidation failed (errno=-5) [ 903.655077] ata1: hard resetting link [ 905.826132] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 905.850829] ata1.00: configured for UDMA/66 [ 905.855065] ata1: EH complete [ 905.872021] ata1.00: limiting speed to UDMA/33:PIO4 [ 905.876930] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 905.884010] ata1.00: irq_stat 0x00020002, PCI target abort while transferring data [ 905.891610] ata1.00: failed command: WRITE DMA [ 905.896074] ata1.00: cmd ca/00:10:c0:98:c4/00:00:00:00:00/e6 tag 19 dma 8192 out [ 905.896074] res f3/ff:00:00:00:00/00:00:00:00:f3/00 Emask 0x22 (host bus error) [ 905.911604] ata1.00: status: { Busy } [ 905.915284] ata1.00: error: { ICRC UNC AMNF IDNF ABRT } [ 905.920538] ata1: hard resetting link [ 908.102004] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 913.111903] ata1.00: qc timeout (cmd 0xec) [ 913.116038] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5) [ 913.122158] ata1.00: revalidation failed (errno=-5) [ 913.127078] ata1: hard resetting link [ 915.297988] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 915.322600] ata1.00: configured for UDMA/33 [ 915.326836] ata1: EH complete [ 915.348105] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 915.355207] ata1.00: irq_stat 0x00020002, PCI target abort while transferring data [ 915.362815] ata1.00: failed command: WRITE DMA [ 915.367279] ata1.00: cmd ca/00:10:c0:98:c4/00:00:00:00:00/e6 tag 20 dma 8192 out [ 915.367279] res f4/ff:00:00:00:00/00:00:00:00:f4/00 Emask 0x22 (host bus error) [ 915.382810] ata1.00: status: { Busy } [ 915.386491] ata1.00: error: { ICRC UNC AMNF IDNF ABRT } [ 915.391744] ata1: hard resetting link [ 917.561987] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 922.583901] ata1.00: qc timeout (cmd 0xec) [ 922.588049] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5) [ 922.594169] ata1.00: revalidation failed (errno=-5) [ 922.599081] ata1: hard resetting link [ 924.769981] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 924.794681] ata1.00: configured for UDMA/33 [ 924.798927] sd 0:0:0:0: [sda] tag#20 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=57s [ 924.808281] sd 0:0:0:0: [sda] tag#20 Sense Key : 0xb [current] [ 924.814231] sd 0:0:0:0: [sda] tag#20 ASC=0x47 ASCQ=0x0 [ 924.819483] sd 0:0:0:0: [sda] tag#20 CDB: opcode=0x2a 2a 00 06 c4 98 c0 00 00 10 00 [ 924.827169] blk_update_request: I/O error, dev sda, sector 113547456 op 0x1:(WRITE) flags 0x800 phys_seg 2 prio class 0 [ 924.838018] Aborting journal on device sda-8. [ 924.838036] ata1: EH complete [ 924.846735] blk_update_request: I/O error, dev loop0, sector 2 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [ 924.857024] Buffer I/O error on dev loop0, logical block 1, lost sync page write [ 924.864473] EXT4-fs (loop0): I/O error while writing superblock move_mount01.c:70: TPASS: Flag MO[ 924.884049] EXT4-fs error (device sda): ext4_journal_check_start:83: comm loop0: Detected aborted journal VE_MOUNT_F_EMPTY_PATH: move_moun[ 924.897412] EXT4-fs (sda): Remounting filesystem read-only t() passed [ 924.904884] EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem [ 924.915569] loop: Write error at byte offset 1024, length 1024. [ 924.921550] blk_update_request: I/O error, dev loop0, sector 2 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [ 924.931855] blk_update_request: I/O error, dev loop0, sector 2 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [ 924.942137] Buffer I/O error on dev loop0, logical block 1, lost sync page write [ 924.949612] EXT4-fs (loop0): I/O error while writing superblock [ 924.955578] EXT4-fs (loop0): mount failed move_mount01.c:47: TFAIL: fsconfi[ 924.992560] EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem g(FSCONFIG_CMD_CREATE) failed: EIO (5) [ 925.004493] loop: Write error at byte offset 1024, length 1024. [ 925.011723] blk_update_request: I/O error, dev loop0, sector 2 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [ 925.022022] blk_update_request: I/O error, dev loop0, sector 2 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [ 925.032305] Buffer I/O error on dev loop0, logical block 1, lost sync page write [ 925.039771] EXT4-fs (loop0): I/O error while writing superblock [ 925.045757] EXT4-fs (loop0): mount failed move_mount01.c:47: TFAIL: fsconfi[ 925.064332] EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem g(FSCONFIG_CMD_CREATE) failed: EIO (5) [ 925.076587] loop: Write error at byte offset 1024, length 1024. [ 925.083805] blk_update_request: I/O error, dev loop0, sector 2 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [ 925.094103] blk_update_request: I/O error, dev loop0, sector 2 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [ 925.104386] Buffer I/O error on dev loop0, logical block 1, lost sync page write [ 925.111838] EXT4-fs (loop0): I/O error while writing superblock [ 925.117801] EXT4-fs (loop0): mount failed move_mount01.c:47: TFAIL: fsconfig(FSCONFIG_CMD_CREATE) failed: EIO (5) tst_test.c:1379: TINFO: Testing on ext4 [ 925.148096] loop: Write error at byte offset 0, length 65536. [ 925.155817] loop: Write error at byte offset 65536, length 65536. [ 925.162008] loop: Write error at byte offset 131072, length 65536. [ 925.168265] blk_update_request: I/O error, dev loop0, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [ 925.168320] loop: Write error at byte offset 196608, length 65536. [ 925.178583] Buffer I/O error on dev loop0, logical block 0, lost async page write [ 925.178641] blk_update_request: I/O error, dev loop0, sector 128 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [ 925.184810] loop: Write error at byte offset 262144, length 65536. [ 925.192314] Buffer I/O error on dev loop0, logical block 1, lost async page write [ 925.216549] loop: Write error at byte offset 327680, length 65536. [ 925.216555] Buffer I/O error on dev loop0, logical block 4, lost async page write [ 925.216567] Buffer I/O error on dev loop0, logical block 2, lost async page write [ 925.216620] Buffer I/O error on dev loop0, logical block 3, lost async page write [ 925.222854] loop: Write error at byte offset 393216, length 65536. [ 925.230315] Buffer I/O error on dev loop0, logical block 5, lost async page write tst_test.c:889: TINFO: Formatting /dev/loop0 with ext4 opts='' extra opts='' mke2fs 1.43.8 (1-Jan-2018) Warning, had trouble writing out superblocks. tst_test.c:889: TBROK: mkfs.ext4 failed with exit code 5 tst_tmpdir.c:337: TWARN: tst_rmdir: rmobj(/scratch/ltp-TGrC0Kijpg/Nyirgt) failed: remove(/scratch/ltp-TGrC0Kijpg/Nyirgt/mntpoint) failed; errno=30: EROFS Summary: passed 9 failed 3 broken 1 skipped 0 warnings 0 tst_tmpdir.c:271: TBROK: tst_tmpdir: mkdtemp(/scratch/ltp-TGrC0Kijpg/OXQGCk) failed: EROFS (30) Reported-by: Linux Kernel Functional Testing Full test logs, https://lkft.validation.linaro.org/scheduler/job/3097379#L9811 https://lkft.validation.linaro.org/scheduler/job/3146329#L7071 metadata: git branch: linux-5.13.y git repo: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc git commit: 80f75a7443c5c9a01f54e3df71ccd23d13c70c44 git describe: v5.13.3-508-g80f75a7443c5 make_kernelversion: 5.13.5-rc1 kernel-config: https://builds.tuxbuild.com/1vg96dRUTrTU7nl6sWV2iwTwnu5/config vmlinux: https://builds.tuxbuild.com/1vg96dRUTrTU7nl6sWV2iwTwnu5/vmlinux.xz System.map: https://builds.tuxbuild.com/1vg96dRUTrTU7nl6sWV2iwTwnu5/System.map [1] kernel Image: https://builds.tuxbuild.com/1vg96dRUTrTU7nl6sWV2iwTwnu5/Image.gz -- Linaro LKFT https://lkft.linaro.org