linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Niklas <niklas.soderlund@ragnatech.se>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Hans Verkuil <hverkuil-cisco@xs4all.nl>,
	linux-media <linux-media@vger.kernel.org>,
	Linux-Renesas <linux-renesas-soc@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: Re: [PATCH 2/2] media: rcar-csi2: Let the driver handle fwnode matching using match_custom callback
Date: Sun, 15 Mar 2020 12:10:14 +0000	[thread overview]
Message-ID: <CA+V-a8sYT+okN_WKY-FEcgD7Znyvh3JeMyuZgBxwPLiseiP_1A@mail.gmail.com> (raw)
In-Reply-To: <20200315102956.GA4732@pendragon.ideasonboard.com>

Hi Laurent,

Thank you for the quick review.

On Sun, Mar 15, 2020 at 10:30 AM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Prabhakar,
>
> Thank you for the patch.
>
> On Sun, Mar 15, 2020 at 10:27:24AM +0000, Lad Prabhakar wrote:
> > The rcar-csi2 driver uses the v4l2-async framework to do endpoint matching
> > instead of node matching. This is needed as it needs to work with the
> > adv748x driver which register it self in v4l2-async using endpoints
> > instead of nodes. The reason for this is that from a single DT node it
> > creates multiple subdevices, one for each endpoint.
> >
> > But when using subdevs which register itself in v4l2-async using nodes,
> > the rcar-csi2 driver failed to find the matching endpoint because the
> > match.fwnode was pointing to remote endpoint instead of remote parent
> > port.
> >
> > This commit adds support in rcar-csi2 driver to handle both the cases
> > where subdev registers in v4l2-async using endpoints/nodes, by using
> > match_type as V4L2_ASYNC_MATCH_CUSTOM and implementing the match()
> > callback to compare the fwnode of either remote/parent.
>
> This is not the way to go. The v4l2-async framework needs to be fixed
> instead, so that fwnode match will do the right thing automatically
> regardless of whether the node is a device node or and endpoint node.
>
OK, so moving forward should the v4l2-async do strictly endpoint
matching only or
both nodes/endpoints. fwnode in all the bridge drivers be replaced to
remote endpoints ?

Looking at the adv7604 its registered as node to v4l2-async which can
have upto 3 endpoints,
adv748x is the single driver which registers itself as endpoint to
v4l2-async, and rest of the
other subdevices have single endpoint and are registered as node to
v4l2-async. How would you
suggest to handle these cases.

Cheers,
--Prabhakar Lad

> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> >  drivers/media/platform/rcar-vin/rcar-csi2.c | 46 +++++++++++++++++++--
> >  1 file changed, 43 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
> > index faa9fb23a2e9..1bbf05e9f025 100644
> > --- a/drivers/media/platform/rcar-vin/rcar-csi2.c
> > +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
> > @@ -808,6 +808,46 @@ static int rcsi2_parse_v4l2(struct rcar_csi2 *priv,
> >       return 0;
> >  }
> >
> > +static bool rcsi2_asd_match(struct v4l2_subdev *sd,
> > +                         struct v4l2_async_subdev *asd)
> > +{
> > +     struct rcar_csi2 *priv = (struct rcar_csi2 *)asd->match.custom.priv;
> > +     struct fwnode_handle *remote_endpoint;
> > +     struct fwnode_handle *subdev_endpoint;
> > +     struct device_node *np;
> > +     bool matched = false;
> > +
> > +     np = of_graph_get_endpoint_by_regs(priv->dev->of_node, 0, 0);
> > +     if (!np) {
> > +             dev_err(priv->dev, "Not connected to subdevice\n");
> > +             return matched;
> > +     }
> > +
> > +     remote_endpoint =
> > +             fwnode_graph_get_remote_endpoint(of_fwnode_handle(np));
> > +     if (!remote_endpoint) {
> > +             dev_err(priv->dev, "Failed to get remote endpoint\n");
> > +             of_node_put(np);
> > +             return matched;
> > +     }
> > +     of_node_put(np);
> > +
> > +     if (sd->fwnode != dev_fwnode(sd->dev)) {
> > +             if (remote_endpoint == sd->fwnode)
> > +                     matched = true;
> > +     } else {
> > +             subdev_endpoint =
> > +                   fwnode_graph_get_next_endpoint(dev_fwnode(sd->dev), NULL);
> > +             if (remote_endpoint == subdev_endpoint)
> > +                     matched = true;
> > +             fwnode_handle_put(subdev_endpoint);
> > +     }
> > +
> > +     fwnode_handle_put(remote_endpoint);
> > +
> > +     return matched;
> > +}
> > +
> >  static int rcsi2_parse_dt(struct rcar_csi2 *priv)
> >  {
> >       struct device_node *ep;
> > @@ -833,9 +873,9 @@ static int rcsi2_parse_dt(struct rcar_csi2 *priv)
> >               return ret;
> >       }
> >
> > -     priv->asd.match.fwnode =
> > -             fwnode_graph_get_remote_endpoint(of_fwnode_handle(ep));
> > -     priv->asd.match_type = V4L2_ASYNC_MATCH_FWNODE;
> > +     priv->asd.match.custom.match = &rcsi2_asd_match;
> > +     priv->asd.match.custom.priv = priv;
> > +     priv->asd.match_type = V4L2_ASYNC_MATCH_CUSTOM;
> >
> >       of_node_put(ep);
> >
>
> --
> Regards,
>
> Laurent Pinchart

  reply	other threads:[~2020-03-15 12:10 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-15 10:27 [PATCH 0/2] rcar-csi2: make use V4L2_ASYNC_MATCH_CUSTOM to do fwnode matching Lad Prabhakar
2020-03-15 10:27 ` [PATCH 1/2] media: v4l2-async: Pass pointer to struct v4l2_subdev in match_custom callback Lad Prabhakar
2020-03-15 10:56   ` Laurent Pinchart
2020-03-15 10:27 ` [PATCH 2/2] media: rcar-csi2: Let the driver handle fwnode matching using " Lad Prabhakar
2020-03-15 10:29   ` Laurent Pinchart
2020-03-15 12:10     ` Lad, Prabhakar [this message]
2020-03-15 12:57       ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CA+V-a8sYT+okN_WKY-FEcgD7Znyvh3JeMyuZgBxwPLiseiP_1A@mail.gmail.com \
    --to=prabhakar.csengg@gmail.com \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=niklas.soderlund@ragnatech.se \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).