From: Pranay Srivastava <pranjas@gmail.com>
To: Eric Blake <eblake@redhat.com>
Cc: Markus Pargmann <mpa@pengutronix.de>,
nbd-general@lists.sourceforge.net, linux-kernel@vger.kernel.org,
Wouter Verhelst <w@uter.be>
Subject: Re: [Nbd] [PATCH 3/3]nbd: make nbd device wait for its users
Date: Sat, 25 Jun 2016 23:26:42 +0530 [thread overview]
Message-ID: <CA+aCy1EQjrDM7ipYqTEg1NJvm6zwQZdaJARYkbiz_YWaC9E5cg@mail.gmail.com> (raw)
In-Reply-To: <576D38C4.6050702@redhat.com>
Hi Eric,
On Fri, Jun 24, 2016 at 7:12 PM, Eric Blake <eblake@redhat.com> wrote:
> On 06/24/2016 04:09 AM, Pranay Kr. Srivastava wrote:
>> When a timeout occurs or a recv fails, then
>> instead of abruplty killing nbd block device
>
> s/abruplty/abruptly/
>
>> wait for it's users to finish.
>
> s/it's/its/
>
>>
>> This is more required when filesystem(s) like
>> ext2 or ext3 don't expect their buffer heads to
>> disappear while the filesystem is mounted.
>>
>> Each open of a nbd device is refcounted, while
>> the userland program [nbd-client] doing the
>> NBD_DO_IT ioctl would now wait for any other users
>> of this device before invalidating the nbd device.
>>
>> A timedout or a disconnected device, if in use, can't
>> be used until it has been resetted. The resetting happens
>
> s/resetted/reset/
>
Thanks for going through the patch. Can I get some review on the
code as well so I can fix and resend that too, along with fixes of grammatical
errors.
>> when all tasks having this bdev open closes this bdev.
>>
>> Signed-off-by: Pranay Kr. Srivastava <pranjas@gmail.com>
>> ---
>> drivers/block/nbd.c | 124 ++++++++++++++++++++++++++++++++++++++++------------
>> 1 file changed, 96 insertions(+), 28 deletions(-)
>>
>
>
> --
> Eric Blake eblake redhat com +1-919-301-3266
> Libvirt virtualization library http://libvirt.org
>
--
---P.K.S
next prev parent reply other threads:[~2016-06-25 17:56 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-24 11:26 [PATCH 0/4]nbd: fixes for nbd Pranay Kr. Srivastava
2016-05-24 11:26 ` [PATCH 1/4] fix might_sleep warning on socket shutdown Pranay Kr. Srivastava
2016-05-30 12:06 ` Markus Pargmann
2016-05-24 11:26 ` [PATCH 2/4] fix various coding standard warnings Pranay Kr. Srivastava
2016-05-24 11:26 ` [PATCH 3/4] make nbd device wait for its users Pranay Kr. Srivastava
2016-05-30 10:44 ` Markus Pargmann
2016-05-24 11:26 ` [PATCH 4/4] use device_attr macros for sysfs attribute Pranay Kr. Srivastava
2016-05-30 3:35 ` [PATCH 0/4]nbd: fixes for nbd Pranay Srivastava
2016-05-30 12:27 ` Markus Pargmann
2016-06-02 10:24 ` [PATCH v2 0/5] nbd: " Pranay Kr. Srivastava
2016-06-02 10:24 ` [PATCH v2 1/5] nbd: fix might_sleep warning on socket shutdown Pranay Kr. Srivastava
2016-06-09 10:03 ` Pranay Srivastava
2016-06-14 5:13 ` Pranay Srivastava
2016-06-14 8:52 ` Markus Pargmann
2016-06-14 9:50 ` Pranay Srivastava
2016-06-24 10:09 ` [PATCH v3 0/3] nbd: resolve bugs and limitations Pranay Kr. Srivastava
2016-06-24 10:09 ` [PATCH v3 1/3]nbd: fix might_sleep warning on socket shutdown Pranay Kr. Srivastava
2016-06-28 5:42 ` Pranay Srivastava
2016-06-29 7:18 ` Markus Pargmann
2016-06-24 10:09 ` [PATCH v3 2/3]nbd: cleanup nbd_set_socket Pranay Kr. Srivastava
2016-06-24 10:09 ` [PATCH 3/3]nbd: make nbd device wait for its users Pranay Kr. Srivastava
2016-06-24 13:42 ` [Nbd] " Eric Blake
2016-06-25 17:56 ` Pranay Srivastava [this message]
2016-06-25 18:01 ` Pranay Srivastava
2016-06-29 7:06 ` Markus Pargmann
2016-06-29 7:15 ` Pranay Srivastava
2016-06-02 10:24 ` [PATCH v2 2/5]nbd: cleanup nbd_set_socket Pranay Kr. Srivastava
2016-06-02 10:24 ` [PATCH v2 3/5]nbd: fix various coding standard warnings Pranay Kr. Srivastava
2016-06-02 10:25 ` [PATCH v2 4/5]nbd: make nbd device wait for its users Pranay Kr. Srivastava
2016-06-14 8:59 ` Markus Pargmann
2016-06-14 9:33 ` Pranay Srivastava
2016-06-15 6:30 ` Markus Pargmann
2016-06-15 7:00 ` [Nbd] " Wouter Verhelst
2016-06-15 9:18 ` Pranay Srivastava
2016-06-15 9:17 ` Pranay Srivastava
2016-06-24 9:29 ` [PATCH 1/2] nbd: " Markus Pargmann
2016-06-24 9:29 ` [PATCH 2/2] nbd: Disallow ioctls on disconnected block device Markus Pargmann
2016-07-16 7:42 ` Pranay Srivastava
2016-07-16 9:32 ` [Nbd] " Alex Bligh
2016-07-16 10:08 ` Pranay Srivastava
2016-07-16 11:26 ` Wouter Verhelst
2016-07-16 13:31 ` Pranay Srivastava
2016-06-24 9:39 ` [PATCH 1/2] nbd: make nbd device wait for its users Pranay Srivastava
2016-06-24 13:40 ` [Nbd] " Eric Blake
2016-06-25 17:52 ` Pranay Srivastava
2016-06-29 6:57 ` Markus Pargmann
2016-06-02 10:25 ` [PATCH v2 5/5]nbd: use device_attr macros for sysfs attribute Pranay Kr. Srivastava
[not found] ` <CA+aCy1E0S4ofa04xcO9qxQmuipaF5wdnrv3ubSvETn-rBYYisA@mail.gmail.com>
2016-06-06 11:07 ` [PATCH 0/4]nbd: fixes for nbd Pranay Srivastava
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CA+aCy1EQjrDM7ipYqTEg1NJvm6zwQZdaJARYkbiz_YWaC9E5cg@mail.gmail.com \
--to=pranjas@gmail.com \
--cc=eblake@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mpa@pengutronix.de \
--cc=nbd-general@lists.sourceforge.net \
--cc=w@uter.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).