Hi Mathias,

I am here on Linux-v5.11-10201-gc03c21ba6f4e.

I see a lot xhci-resets in my dmesg-log:

root# LC_ALL=C dmesg -T | grep 'usb 4-1: reset SuperSpeed Gen 1 USB
device number 2 using xhci_hcd' | wc -l
75

This is what I have:

root# lsusb -s 004:001
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

root# lsusb -s 004:002
Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA
6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge,
ASM1153E SATA 6Gb/s bridge

My external USB 3.0 HDD contains the partition with my Debian-system
and is attached to the above xhci bus/device.

Can you enlighten what this means?
Is this a known issue?
Is there a fix around?

BTW, in which Git tree is the xhci development happening?
Can you point me to it?

I am attaching my linux-config and full dmesg-log.

Also I have attached outputs of:

$ sudo lsusb -vvv -d 1d6b:0003
$ sudo lsusb -vvv -d 174c:55aa

If you need further information, please let me know.

Thanks.

Regards,
- Sedat -