From: Sedat Dilek <sedat.dilek@gmail.com>
To: Alan Stern <stern@rowland.harvard.edu>
Cc: Mathias Nyman <mathias.nyman@intel.com>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
Date: Fri, 12 Mar 2021 18:01:57 +0100 [thread overview]
Message-ID: <CA+icZUWb40r1MTFYk9S0h2XgGfqCQtxpm9yHKNr3PDnDbUNBKQ@mail.gmail.com> (raw)
In-Reply-To: <CA+icZUWaGt2k4kdV0JHqKUkB8DySqdeUgVNnVT1BUo8aveGZOw@mail.gmail.com>
On Fri, Mar 12, 2021 at 5:57 PM Sedat Dilek <sedat.dilek@gmail.com> wrote:
>
> On Sun, Mar 7, 2021 at 6:07 PM Alan Stern <stern@rowland.harvard.edu> wrote:
> >
> > On Sun, Mar 07, 2021 at 05:57:39PM +0100, Sedat Dilek wrote:
> > > On Sun, Mar 7, 2021 at 4:46 PM Alan Stern <stern@rowland.harvard.edu> wrote:
> > > >
> > > > On Sat, Mar 06, 2021 at 09:49:00PM +0100, Sedat Dilek wrote:
> > > >
> > > > > For testing purposes, I stopped these systemd services:
> > > > >
> > > > > 1. systemctl stop smartmontools.service
> > > > >
> > > > > 2. systemctl stop udisks2.service
> > > > >
> > > > > Last seen xhci-reset:
> > > > >
> > > > > [Sat Mar 6 21:37:40 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> > > > >
> > > > > So, that every 10min xhci-reset was caused by pool-udisksd from udisks2.service.
> > > >
> > > > You have found the cause of your problem! Great!
> > > >
> > > > And now, obviously order to fix the problem, you'll have to look into
> > > > the udisks2 service. Maybe you can configure it so that it won't send
> > > > the problem-causing commands.
> > > >
> > >
> > > I tried yesterday to add --debug option to the ExexStart line of
> > > udisks2.service, but did not see anything helpful.
> > >
> > > There exist more user-space than udisks2 causing these xhci-resets.
> > > The cmd#s are also clear: A1 and 85 - whatever they mean.
> >
> > Those are the two prefixes which indicate an ATA command is present.
> > You can find them listed as ATA_12 and ATA_16 in
> > include/scsi/scsi_proto.h.
> >
> > > As said with Linux v5.10.y and Linux v5.11 I have not seen this.
> >
> > Have you tried setting the quirk flag we discussed earlier _and_ turning
> > off udisks2? Maybe also turning off the other services which generate
> > these commands? Perhaps you'll find that when the quirk flag is
> > present, some of those programs _don't_ generate any ATA commands.
> >
>
> I passed as a kernel-command-line parameter: usb-storage.quirks=174c:55aa:t
>
> dmesg says:
>
> [Fri Mar 12 17:25:33 2021] usb-storage 4-1:1.0: Quirks match for vid
> 174c pid 55aa: 2400000
>
> Without that parameter (there is an existing Quirks for my ASMedia USB
> 3.0 controller in the kernel-sources):
>
> [Fri Mar 12 11:49:03 2021] usb-storage 4-1:1.0: Quirks match for vid
> 174c pid 55aa: 400000
>
> NOTE: 2400000 (new) VS. 400000 (old)
>
> The parameter is really active:
>
> root# cat /sys/module/usb_storage/parameters/quirks
> 174c:55aa:t
>
> The total number of xhci-resets is reduced:
>
> root# LC_ALL=C dmesg -T | egrep 'usb 4-1: reset SuperSpeed Gen 1 USB
> device number 2 using xhci_hcd' | wc -l
> 24
>
> Together with your diff, I see in dmesg now:
>
> # LC_ALL=C dmesg -T | egrep 'reset|SCSI ioctl error'
> [Fri Mar 12 17:25:32 2021] SCSI ioctl error, cmd A1, prog ata_id
> [Fri Mar 12 17:25:32 2021] SCSI ioctl error, cmd A1, prog ata_id
> [Fri Mar 12 17:25:33 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:33 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:33 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:34 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:34 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:34 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:34 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:34 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:35 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:35 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:35 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:35 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:36 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:36 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:36 2021] SCSI ioctl error, cmd A1, prog ata_id
> [Fri Mar 12 17:25:36 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:36 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:37 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:37 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:37 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:37 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:37 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:38 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:38 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:38 2021] usb 4-1: reset SuperSpeed Gen 1 USB device
> number 2 using xhci_hcd
> [Fri Mar 12 17:25:58 2021] SCSI ioctl error, cmd A1, prog ata_id
> [Fri Mar 12 17:25:58 2021] SCSI ioctl error, cmd A1, prog ata_id
> [Fri Mar 12 17:26:03 2021] SCSI ioctl error, cmd 85, prog hdparm
> [Fri Mar 12 17:26:03 2021] SCSI ioctl error, cmd 85, prog hdparm
> [Fri Mar 12 17:26:03 2021] SCSI ioctl error, cmd 85, prog hdparm
> [Fri Mar 12 17:26:03 2021] SCSI ioctl error, cmd 85, prog hdparm
> [Fri Mar 12 17:26:03 2021] SCSI ioctl error, cmd 85, prog hdparm
> [Fri Mar 12 17:26:03 2021] SCSI ioctl error, cmd 85, prog hdparm
> [Fri Mar 12 17:26:03 2021] SCSI ioctl error, cmd A1, prog ata_id
> [Fri Mar 12 17:26:05 2021] SCSI ioctl error, cmd 85, prog smartd
> [Fri Mar 12 17:26:06 2021] SCSI ioctl error, cmd 85, prog smartd
> [Fri Mar 12 17:26:06 2021] SCSI ioctl error, cmd 85, prog smartd
> [Fri Mar 12 17:26:06 2021] SCSI ioctl error, cmd 85, prog smartd
> [Fri Mar 12 17:26:06 2021] SCSI ioctl error, cmd 85, prog smartd
> [Fri Mar 12 17:26:06 2021] SCSI ioctl error, cmd 85, prog smartd
> [Fri Mar 12 17:26:06 2021] SCSI ioctl error, cmd 85, prog smartd
> [Fri Mar 12 17:26:06 2021] SCSI ioctl error, cmd 85, prog smartd
> [Fri Mar 12 17:26:07 2021] SCSI ioctl error, cmd 85, prog smartd
> [Fri Mar 12 17:26:07 2021] SCSI ioctl error, cmd 85, prog smartd
> [Fri Mar 12 17:26:13 2021] SCSI ioctl error, cmd A1, prog ata_id
> [Fri Mar 12 17:26:13 2021] SCSI ioctl error, cmd A1, prog ata_id
> [Fri Mar 12 17:26:13 2021] SCSI ioctl error, cmd 85, prog hdparm
> [Fri Mar 12 17:26:13 2021] SCSI ioctl error, cmd 85, prog hdparm
> [Fri Mar 12 17:26:13 2021] SCSI ioctl error, cmd 85, prog hdparm
> [Fri Mar 12 17:26:13 2021] SCSI ioctl error, cmd A1, prog ata_id
> [Fri Mar 12 17:26:13 2021] SCSI ioctl error, cmd 85, prog hdparm
> [Fri Mar 12 17:26:14 2021] SCSI ioctl error, cmd 85, prog hdparm
> [Fri Mar 12 17:26:14 2021] SCSI ioctl error, cmd 85, prog hdparm
> [Fri Mar 12 17:26:18 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:26:18 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:26:18 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:26:18 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:26:18 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:26:18 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:26:18 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:26:18 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:26:18 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:26:18 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:26:23 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:26:23 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:26:23 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:26:23 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:26:24 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:26:24 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:26:24 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:26:24 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:26:24 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:26:24 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:26:24 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:26:24 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:26:24 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:26:24 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:27:37 2021] SCSI ioctl error, cmd 85, prog smartctl
> [Fri Mar 12 17:27:37 2021] SCSI ioctl error, cmd 85, prog smartctl
> [Fri Mar 12 17:27:39 2021] SCSI ioctl error, cmd 85, prog smartctl
> [Fri Mar 12 17:27:40 2021] SCSI ioctl error, cmd 85, prog smartctl
> [Fri Mar 12 17:36:23 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:36:23 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:36:24 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:36:24 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:36:24 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:36:24 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:36:24 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:36:24 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:36:24 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:36:24 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:38:33 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:38:33 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:38:33 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:38:33 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:38:33 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:38:33 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:38:33 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:38:33 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:38:33 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:38:33 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:38:33 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:38:33 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:38:34 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:38:34 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:38:34 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:38:34 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:38:34 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:38:34 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:38:34 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:38:34 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:38:34 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:38:34 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:38:34 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:38:34 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:40:57 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:40:57 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:40:57 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:40:57 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:40:57 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:40:57 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:40:57 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:40:57 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:40:57 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:40:57 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:40:57 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:40:57 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:40:57 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:40:57 2021] SCSI ioctl error, cmd 85, prog udisksd
> [Fri Mar 12 17:40:57 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:40:57 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:40:57 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:40:57 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:40:57 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:40:58 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:40:58 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:40:58 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:40:58 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
> [Fri Mar 12 17:40:58 2021] SCSI ioctl error, cmd 85, prog pool-udisksd
>
> So, the quirk you recommended seems to silence the xhci-resets -
> passed as a kernel-command-line parameter.
>
> Furthermore, I tried via:
>
> #1: /etc/modules-load.d/usb-storage.conf
> options usb-storage quirks=174c:55aa:t
>
> Should this be with a dot than a space?
> options usb-storage.quirks=174c:55aa:t
>
Grrr, space is right - I need to do an update-initramfs.
- Sedat -
> #2: echo '174c:55aa:t' > /sys/module/usb_storage/parameters/quirks
> ...after system was booted into
>
> Both had no effect.
>
> After 31mins of uptime I still see above 24 xhci-resets.
>
> I have attached my linux-config and full dmesg-log.
>
> - Sedat -
next prev parent reply other threads:[~2021-03-12 17:03 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-24 13:44 [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd Sedat Dilek
2021-02-24 17:25 ` Sedat Dilek
2021-03-01 8:54 ` Sedat Dilek
2021-03-01 15:53 ` Alan Stern
2021-03-05 12:09 ` Sedat Dilek
2021-03-05 16:07 ` Alan Stern
2021-03-05 19:05 ` Sedat Dilek
2021-03-05 19:22 ` Sedat Dilek
2021-03-05 19:30 ` Alan Stern
2021-03-05 19:41 ` Sedat Dilek
2021-03-05 19:47 ` Alan Stern
2021-03-05 19:54 ` Sedat Dilek
2021-03-06 6:42 ` Sedat Dilek
2021-03-06 16:58 ` Alan Stern
2021-03-06 19:30 ` Sedat Dilek
2021-03-06 20:26 ` Sedat Dilek
2021-03-06 20:38 ` Sedat Dilek
2021-03-06 20:49 ` Sedat Dilek
2021-03-06 20:56 ` Sedat Dilek
2021-03-06 21:02 ` Sedat Dilek
2021-03-07 15:46 ` Alan Stern
2021-03-07 16:57 ` Sedat Dilek
2021-03-07 17:07 ` Alan Stern
2021-03-12 16:57 ` Sedat Dilek
2021-03-12 17:01 ` Sedat Dilek [this message]
2021-03-12 17:41 ` Sedat Dilek
2021-03-12 18:05 ` Alan Stern
2021-03-12 18:26 ` Sedat Dilek
2021-03-12 21:56 ` Alan Stern
2021-03-05 19:25 ` Alan Stern
2021-03-05 19:37 ` Sedat Dilek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CA+icZUWb40r1MTFYk9S0h2XgGfqCQtxpm9yHKNr3PDnDbUNBKQ@mail.gmail.com \
--to=sedat.dilek@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).