linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dong Aisheng <dongas86@gmail.com>
To: Richard Zhu <hongxing.zhu@nxp.com>
Cc: jassisinghbrar@gmail.com,
	Oleksij Rempel <o.rempel@pengutronix.de>,
	Dong Aisheng <aisheng.dong@nxp.com>,
	open list <linux-kernel@vger.kernel.org>,
	"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" 
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH] mailbox: imx: add support for imx v1 mu
Date: Mon, 29 Jul 2019 10:35:15 +0800	[thread overview]
Message-ID: <CAA+hA=Qg9uu+m3iTnbu2_+s4UN=kGpSNHsoKtjUggXnvLy4hbw@mail.gmail.com> (raw)
In-Reply-To: <1564366440-10970-1-git-send-email-hongxing.zhu@nxp.com>

On Mon, Jul 29, 2019 at 10:36 AM Richard Zhu <hongxing.zhu@nxp.com> wrote:
>
> There is a version1.0 MU on i.MX7ULP platform.
> One new version ID register is added, and it's offset is 0.
> TRn registers are defined at the offset 0x20 ~ 0x2C.
> RRn registers are defined at the offset 0x40 ~ 0x4C.
> SR/CR registers are defined at 0x60/0x64.
> Extend this driver to support it.
>

If only the register base offset is different, there's probably a more
simple way.
Please refer to:
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/tty/serial/fsl_lpuart.c?id=24b1e5f0e83c2aced8096473d20c4cf6c1355f30

Regards
Aisheng

> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
>  drivers/mailbox/imx-mailbox.c | 67 ++++++++++++++++++++++++++++++++-----------
>  1 file changed, 50 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/mailbox/imx-mailbox.c b/drivers/mailbox/imx-mailbox.c
> index 25be8bb..8423a38 100644
> --- a/drivers/mailbox/imx-mailbox.c
> +++ b/drivers/mailbox/imx-mailbox.c
> @@ -12,19 +12,11 @@
>  #include <linux/of_device.h>
>  #include <linux/slab.h>
>
> -/* Transmit Register */
> -#define IMX_MU_xTRn(x)         (0x00 + 4 * (x))
> -/* Receive Register */
> -#define IMX_MU_xRRn(x)         (0x10 + 4 * (x))
> -/* Status Register */
> -#define IMX_MU_xSR             0x20
>  #define IMX_MU_xSR_GIPn(x)     BIT(28 + (3 - (x)))
>  #define IMX_MU_xSR_RFn(x)      BIT(24 + (3 - (x)))
>  #define IMX_MU_xSR_TEn(x)      BIT(20 + (3 - (x)))
>  #define IMX_MU_xSR_BRDIP       BIT(9)
>
> -/* Control Register */
> -#define IMX_MU_xCR             0x24
>  /* General Purpose Interrupt Enable */
>  #define IMX_MU_xCR_GIEn(x)     BIT(28 + (3 - (x)))
>  /* Receive Interrupt Enable */
> @@ -44,6 +36,13 @@ enum imx_mu_chan_type {
>         IMX_MU_TYPE_RXDB,       /* Rx doorbell */
>  };
>
> +struct imx_mu_dcfg {
> +       u32     xTR[4];         /* Transmit Registers */
> +       u32     xRR[4];         /* Receive Registers */
> +       u32     xSR;            /* Status Register */
> +       u32     xCR;            /* Control Register */
> +};
> +
>  struct imx_mu_con_priv {
>         unsigned int            idx;
>         char                    irq_desc[IMX_MU_CHAN_NAME_SIZE];
> @@ -61,12 +60,39 @@ struct imx_mu_priv {
>         struct mbox_chan        mbox_chans[IMX_MU_CHANS];
>
>         struct imx_mu_con_priv  con_priv[IMX_MU_CHANS];
> +       const struct imx_mu_dcfg        *dcfg;
>         struct clk              *clk;
>         int                     irq;
>
>         bool                    side_b;
>  };
>
> +static const struct imx_mu_dcfg imx_mu_cfg_imx6sx = {
> +       .xTR[0] = 0x0,
> +       .xTR[1] = 0x4,
> +       .xTR[2] = 0x8,
> +       .xTR[3] = 0xC,
> +       .xRR[0] = 0x10,
> +       .xRR[1] = 0x14,
> +       .xRR[2] = 0x18,
> +       .xRR[3] = 0x1C,
> +       .xSR    = 0x20,
> +       .xCR    = 0x24,
> +};
> +
> +static const struct imx_mu_dcfg imx_mu_cfg_imx7ulp = {
> +       .xTR[0] = 0x20,
> +       .xTR[1] = 0x24,
> +       .xTR[2] = 0x28,
> +       .xTR[3] = 0x2C,
> +       .xRR[0] = 0x40,
> +       .xRR[1] = 0x44,
> +       .xRR[2] = 0x48,
> +       .xRR[3] = 0x4C,
> +       .xSR    = 0x60,
> +       .xCR    = 0x64,
> +};
> +
>  static struct imx_mu_priv *to_imx_mu_priv(struct mbox_controller *mbox)
>  {
>         return container_of(mbox, struct imx_mu_priv, mbox);
> @@ -88,10 +114,10 @@ static u32 imx_mu_xcr_rmw(struct imx_mu_priv *priv, u32 set, u32 clr)
>         u32 val;
>
>         spin_lock_irqsave(&priv->xcr_lock, flags);
> -       val = imx_mu_read(priv, IMX_MU_xCR);
> +       val = imx_mu_read(priv, priv->dcfg->xCR);
>         val &= ~clr;
>         val |= set;
> -       imx_mu_write(priv, val, IMX_MU_xCR);
> +       imx_mu_write(priv, val, priv->dcfg->xCR);
>         spin_unlock_irqrestore(&priv->xcr_lock, flags);
>
>         return val;
> @@ -111,8 +137,8 @@ static irqreturn_t imx_mu_isr(int irq, void *p)
>         struct imx_mu_con_priv *cp = chan->con_priv;
>         u32 val, ctrl, dat;
>
> -       ctrl = imx_mu_read(priv, IMX_MU_xCR);
> -       val = imx_mu_read(priv, IMX_MU_xSR);
> +       ctrl = imx_mu_read(priv, priv->dcfg->xCR);
> +       val = imx_mu_read(priv, priv->dcfg->xSR);
>
>         switch (cp->type) {
>         case IMX_MU_TYPE_TX:
> @@ -138,10 +164,10 @@ static irqreturn_t imx_mu_isr(int irq, void *p)
>                 imx_mu_xcr_rmw(priv, 0, IMX_MU_xCR_TIEn(cp->idx));
>                 mbox_chan_txdone(chan, 0);
>         } else if (val == IMX_MU_xSR_RFn(cp->idx)) {
> -               dat = imx_mu_read(priv, IMX_MU_xRRn(cp->idx));
> +               dat = imx_mu_read(priv, priv->dcfg->xRR[cp->idx]);
>                 mbox_chan_received_data(chan, (void *)&dat);
>         } else if (val == IMX_MU_xSR_GIPn(cp->idx)) {
> -               imx_mu_write(priv, IMX_MU_xSR_GIPn(cp->idx), IMX_MU_xSR);
> +               imx_mu_write(priv, IMX_MU_xSR_GIPn(cp->idx), priv->dcfg->xSR);
>                 mbox_chan_received_data(chan, NULL);
>         } else {
>                 dev_warn_ratelimited(priv->dev, "Not handled interrupt\n");
> @@ -159,7 +185,7 @@ static int imx_mu_send_data(struct mbox_chan *chan, void *data)
>
>         switch (cp->type) {
>         case IMX_MU_TYPE_TX:
> -               imx_mu_write(priv, *arg, IMX_MU_xTRn(cp->idx));
> +               imx_mu_write(priv, *arg, priv->dcfg->xTR[cp->idx]);
>                 imx_mu_xcr_rmw(priv, IMX_MU_xCR_TIEn(cp->idx), 0);
>                 break;
>         case IMX_MU_TYPE_TXDB:
> @@ -257,7 +283,7 @@ static void imx_mu_init_generic(struct imx_mu_priv *priv)
>                 return;
>
>         /* Set default MU configuration */
> -       imx_mu_write(priv, 0, IMX_MU_xCR);
> +       imx_mu_write(priv, 0, priv->dcfg->xCR);
>  }
>
>  static int imx_mu_probe(struct platform_device *pdev)
> @@ -265,6 +291,7 @@ static int imx_mu_probe(struct platform_device *pdev)
>         struct device *dev = &pdev->dev;
>         struct device_node *np = dev->of_node;
>         struct imx_mu_priv *priv;
> +       const struct imx_mu_dcfg *dcfg;
>         unsigned int i;
>         int ret;
>
> @@ -282,6 +309,11 @@ static int imx_mu_probe(struct platform_device *pdev)
>         if (priv->irq < 0)
>                 return priv->irq;
>
> +       dcfg = of_device_get_match_data(dev);
> +       if (!dcfg)
> +               return -EINVAL;
> +       priv->dcfg = dcfg;
> +
>         priv->clk = devm_clk_get(dev, NULL);
>         if (IS_ERR(priv->clk)) {
>                 if (PTR_ERR(priv->clk) != -ENOENT)
> @@ -335,7 +367,8 @@ static int imx_mu_remove(struct platform_device *pdev)
>  }
>
>  static const struct of_device_id imx_mu_dt_ids[] = {
> -       { .compatible = "fsl,imx6sx-mu" },
> +       { .compatible = "fsl,imx7ulp-mu", .data = &imx_mu_cfg_imx7ulp },
> +       { .compatible = "fsl,imx6sx-mu", .data = &imx_mu_cfg_imx6sx },
>         { },
>  };
>  MODULE_DEVICE_TABLE(of, imx_mu_dt_ids);
> --
> 2.7.4
>

  reply	other threads:[~2019-07-29  2:44 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-29  2:14 [PATCH] mailbox: imx: add support for imx v1 mu Richard Zhu
2019-07-29  2:35 ` Dong Aisheng [this message]
2019-07-29  3:03   ` [EXT] " Richard Zhu
2019-07-29  3:11     ` Dong Aisheng
2019-07-29  5:42       ` Richard Zhu
2019-07-29  8:38 ` Oleksij Rempel
2019-07-29  9:57   ` [EXT] " Richard Zhu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAA+hA=Qg9uu+m3iTnbu2_+s4UN=kGpSNHsoKtjUggXnvLy4hbw@mail.gmail.com' \
    --to=dongas86@gmail.com \
    --cc=aisheng.dong@nxp.com \
    --cc=hongxing.zhu@nxp.com \
    --cc=jassisinghbrar@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=o.rempel@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).