From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
To: Neal Liu <neal.liu@mediatek.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
devicetree@vger.kernel.org,
wsd_upstream <wsd_upstream@mediatek.com>,
lkml <linux-kernel@vger.kernel.org>,
"moderated list:ARM/Mediatek SoC support"
<linux-mediatek@lists.infradead.org>,
Linux ARM <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v4 2/2] soc: mediatek: add mtk-devapc driver
Date: Thu, 30 Jul 2020 06:47:04 +0800 [thread overview]
Message-ID: <CAAOTY_9dqcQdZd5x9ckE67KKh-4d_5gN9MQYDq7b4vGCWwHoDw@mail.gmail.com> (raw)
In-Reply-To: <1596010690-13178-3-git-send-email-neal.liu@mediatek.com>
Hi, Neal:
Neal Liu <neal.liu@mediatek.com> 於 2020年7月29日 週三 下午4:29寫道:
>
> MediaTek bus fabric provides TrustZone security support and data
> protection to prevent slaves from being accessed by unexpected
> masters.
> The security violation is logged and sent to the processor for
> further analysis or countermeasures.
>
> Any occurrence of security violation would raise an interrupt, and
> it will be handled by mtk-devapc driver. The violation
> information is printed in order to find the murderer.
>
> Signed-off-by: Neal Liu <neal.liu@mediatek.com>
[snip]
> +
> +static void devapc_vio_info_print(struct mtk_devapc_context *ctx)
> +{
> + struct mtk_devapc_vio_info *vio_info = ctx->vio_info;
> +
> + /* Print violation information */
> + if (vio_info->write)
> + dev_info(ctx->dev, "Write Violation\n");
> + else if (vio_info->read)
> + dev_info(ctx->dev, "Read Violation\n");
> +
> + dev_info(ctx->dev, "Vio Addr:0x%x, High:0x%x, Bus ID:0x%x, Dom ID:%x\n",
> + vio_info->vio_addr, vio_info->vio_addr_high,
> + vio_info->master_id, vio_info->domain_id);
> +}
devapc_vio_info_print() is small function and only called by
devapc_extract_vio_dbg(), so I would like to merge this function into
devapc_extract_vio_dbg() and you could drop struct mtk_devapc_vio_info
because its member are all local variable.
> +
> +/*
> + * devapc_extract_vio_dbg - extract full violation information after doing
> + * shift mechanism.
> + */
> +static void devapc_extract_vio_dbg(struct mtk_devapc_context *ctx)
> +{
> + const struct mtk_devapc_vio_dbgs *vio_dbgs;
> + struct mtk_devapc_vio_info *vio_info;
> + void __iomem *vio_dbg0_reg;
> + void __iomem *vio_dbg1_reg;
> + u32 dbg0;
> +
> + vio_dbg0_reg = ctx->devapc_pd_base + ctx->offset->vio_dbg0;
> + vio_dbg1_reg = ctx->devapc_pd_base + ctx->offset->vio_dbg1;
> +
> + vio_dbgs = ctx->vio_dbgs;
> + vio_info = ctx->vio_info;
> +
> + /* Starts to extract violation information */
> + dbg0 = readl(vio_dbg0_reg);
> + vio_info->vio_addr = readl(vio_dbg1_reg);
> +
> + vio_info->master_id = (dbg0 & vio_dbgs->mstid.mask) >>
> + vio_dbgs->mstid.start;
> + vio_info->domain_id = (dbg0 & vio_dbgs->dmnid.mask) >>
> + vio_dbgs->dmnid.start;
> + vio_info->write = ((dbg0 & vio_dbgs->vio_w.mask) >>
> + vio_dbgs->vio_w.start) == 1;
> + vio_info->read = ((dbg0 & vio_dbgs->vio_r.mask) >>
> + vio_dbgs->vio_r.start) == 1;
> + vio_info->vio_addr_high = (dbg0 & vio_dbgs->addr_h.mask) >>
> + vio_dbgs->addr_h.start;
> +
> + devapc_vio_info_print(ctx);
> +}
> +
[snip]
> +
> +/*
> + * start_devapc - unmask slave's irq to start receiving devapc violation.
> + */
> +static void start_devapc(struct mtk_devapc_context *ctx)
> +{
> + u32 vio_idx;
> +
> + for (vio_idx = 0; vio_idx < ctx->vio_idx_num; vio_idx++)
> + mask_module_irq(ctx, vio_idx, false);
Are these bits default true? If they are default false, you need not
to setup it to false again.
> +}
> +
[snip]
> diff --git a/drivers/soc/mediatek/mtk-devapc.h b/drivers/soc/mediatek/mtk-devapc.h
> new file mode 100644
> index 0000000..7bd7e66
> --- /dev/null
> +++ b/drivers/soc/mediatek/mtk-devapc.h
> @@ -0,0 +1,54 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2020 MediaTek Inc.
> + */
> +
> +#ifndef __MTK_DEVAPC_H__
> +#define __MTK_DEVAPC_H__
> +
> +#define VIO_MOD_TO_REG_IND(m) ((m) / 32)
> +#define VIO_MOD_TO_REG_OFF(m) ((m) % 32)
> +
> +struct mtk_devapc_pd_offset {
> + u32 vio_mask;
> + u32 vio_sta;
> + u32 vio_dbg0;
> + u32 vio_dbg1;
> + u32 apc_con;
> + u32 vio_shift_sta;
> + u32 vio_shift_sel;
> + u32 vio_shift_con;
> +};
> +
> +struct mtk_devapc_vio_dbgs_desc {
> + u32 mask;
> + u32 start;
> +};
> +
> +struct mtk_devapc_vio_dbgs {
> + struct mtk_devapc_vio_dbgs_desc mstid;
> + struct mtk_devapc_vio_dbgs_desc dmnid;
> + struct mtk_devapc_vio_dbgs_desc vio_w;
> + struct mtk_devapc_vio_dbgs_desc vio_r;
> + struct mtk_devapc_vio_dbgs_desc addr_h;
> +};
> +
> +struct mtk_devapc_vio_info {
> + bool read;
> + bool write;
> + u32 vio_addr;
> + u32 vio_addr_high;
> + u32 master_id;
> + u32 domain_id;
> +};
> +
> +struct mtk_devapc_context {
> + struct device *dev;
> + u32 vio_idx_num;
> + void __iomem *devapc_pd_base;
> + struct mtk_devapc_vio_info *vio_info;
> + const struct mtk_devapc_pd_offset *offset;
> + const struct mtk_devapc_vio_dbgs *vio_dbgs;
> +};
> +
> +#endif /* __MTK_DEVAPC_H__ */
Data in this header file is only used in mtk-devapc.c and mtk-devapc.c
is a small file, so I think it's better to move data in header file
into .c file to make code simpler.
Regards,
Chun-Kuang.
next prev parent reply other threads:[~2020-07-29 22:47 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-29 8:18 [PATCH v4] Add MediaTek MT6779 devapc driver Neal Liu
2020-07-29 8:18 ` [PATCH v4 1/2] dt-bindings: devapc: add bindings for mtk-devapc Neal Liu
2020-07-29 8:18 ` [PATCH v4 2/2] soc: mediatek: add mtk-devapc driver Neal Liu
2020-07-29 16:38 ` Chun-Kuang Hu
2020-07-31 2:44 ` Neal Liu
2020-07-31 15:03 ` Chun-Kuang Hu
2020-08-03 3:32 ` Neal Liu
2020-08-03 16:13 ` Chun-Kuang Hu
2020-08-04 2:18 ` Neal Liu
2020-08-04 15:27 ` Chun-Kuang Hu
2020-07-29 22:47 ` Chun-Kuang Hu [this message]
2020-07-31 2:47 ` Neal Liu
2020-07-30 16:14 ` Chun-Kuang Hu
2020-07-31 2:52 ` Neal Liu
2020-07-31 15:55 ` Chun-Kuang Hu
2020-08-03 3:41 ` Neal Liu
2020-08-01 0:12 ` Chun-Kuang Hu
2020-08-03 4:01 ` Neal Liu
2020-08-03 16:04 ` Chun-Kuang Hu
2020-08-04 2:08 ` Neal Liu
2020-08-04 15:55 ` Chun-Kuang Hu
2020-08-01 23:50 ` Chun-Kuang Hu
2020-08-03 4:05 ` Neal Liu
2020-08-03 15:38 ` Chun-Kuang Hu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAAOTY_9dqcQdZd5x9ckE67KKh-4d_5gN9MQYDq7b4vGCWwHoDw@mail.gmail.com \
--to=chunkuang.hu@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=neal.liu@mediatek.com \
--cc=robh+dt@kernel.org \
--cc=wsd_upstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).