From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751321AbdH1XmG (ORCPT ); Mon, 28 Aug 2017 19:42:06 -0400 Received: from mail-wm0-f66.google.com ([74.125.82.66]:33838 "EHLO mail-wm0-f66.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751288AbdH1XmE (ORCPT ); Mon, 28 Aug 2017 19:42:04 -0400 MIME-Version: 1.0 In-Reply-To: <20170829004549.3a936874@bbrezillon> References: <1503958832-7525-1-git-send-email-andrea.adami@gmail.com> <20170829004549.3a936874@bbrezillon> From: Andrea Adami Date: Tue, 29 Aug 2017 01:42:02 +0200 Message-ID: Subject: Re: [PATCH v7] mtd: sharpslpart: Add sharpslpart partition parser To: Boris Brezillon Cc: linux-mtd@lists.infradead.org, David Woodhouse , Brian Norris , Marek Vasut , Richard Weinberger , Cyrille Pitchen , =?UTF-8?B?UmFmYcWCIE1pxYJlY2tp?= , Haojian Zhuang , Dmitry Eremin-Solenikov , Robert Jarzmik , linux-kernel@vger.kernel.org Content-Type: text/plain; charset="UTF-8" Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Tue, Aug 29, 2017 at 12:45 AM, Boris Brezillon wrote: > On Tue, 29 Aug 2017 00:20:32 +0200 > Andrea Adami wrote: > >> The Sharp SL Series (Zaurus) PXA handhelds have 16/64/128M of NAND flash >> and share the same layout of the first 7M partition, managed by Sharp FTL. >> >> GPL 2.4 sources: http://support.ezaurus.com/developer/source/source_dl.asp >> >> The purpose of this self-contained patch is to add a common parser and >> remove the hardcoded sizes in the board files (these devices are not yet >> converted to devicetree). >> Users will have benefits because the mtdparts= tag will not be necessary >> anymore and they will be free to repartition the little sized flash. >> >> The obsolete bootloader can not pass the partitioning info to modern >> kernels anymore so it has to be read from flash at known logical addresses. >> (see http://www.h5.dion.ne.jp/~rimemoon/zaurus/memo_006.htm ) >> >> In kernel, under arch/arm/mach-pxa we have already 8 machines: >> MACH_POODLE, MACH_CORGI, MACH_SHEPERD, MACH_HUSKY, MACH_AKITA, MACH_SPITZ, >> MACH_BORZOI, MACH_TOSA. >> Lost after the 2.4 vendor kernel are MACH_BOXER and MACH_TERRIER. >> >> Almost every model has different factory partitioning: add to this the >> units can be repartitioned by users with userspace tools (nandlogical) >> and installers for popular (back then) linux distributions. >> >> The Parameter Area in the first (boot) partition extends from 0x00040000 to >> 0x0007bfff (176k) and contains two copies of the partition table: >> ... >> 0x00060000: Partition Info1 16k >> 0x00064000: Partition Info2 16k >> 0x00668000: Model 16k >> ... >> >> The first 7M partition is managed by the Sharp FTL reserving 5% + 1 blocks >> for wear-leveling: some blocks are remapped and one layer of translation >> (logical to physical) is necessary. >> >> There isn't much documentation about this FTL in the 2.4 sources, just the >> MTD methods for reading and writing using logical addresses and the block >> management (wear-leveling, use counter). >> It seems this FTL was tailored with 16KiB eraesize in mind so to fit one >> param block exactly, to have two copies of the partition table on two >> blocks. >> Later pxa27x devices have same size but 128KiB erasesize and less blocks >> (56 vs. 448) but the same schema was adopted, even if the two tables are >> now in the same eraseblock. >> >> For the purpose of the MTD parser only the read part of the code was taken. >> >> The NAND drivers that can use this parser are sharpsl.c and tmio_nand.c. >> > > A few nitpicks below. Once fixed you can add > > Reviewed-by: Boris Brezillon > Thanks again for your help. >> Changelog: >> v1 firt version, initial import of 2.4 sources >> v2 refactor applying many suggested fixes >> v3 put the partition parser types in the platform data >> v4 refactor after ML review >> v5 fix commit messages and texts, remove global, fixes after v4 review >> v6 refactor memory mgmt passing pointer to the FTL, fixes after v5 review >> v7 verify the oob are free for the FTL, renamings, fixes after v6 review > > The changelog should not be part of the commit message... > >> >> Signed-off-by: Andrea Adami >> --- > > ... it should be go here (after the --- separator) so that when we apply > the patch it goes away. > Sorry, I have copied it in the wrong line. >> drivers/mtd/parsers/Kconfig | 8 + >> drivers/mtd/parsers/Makefile | 1 + >> drivers/mtd/parsers/sharpslpart.c | 399 ++++++++++++++++++++++++++++++++++++++ >> 3 files changed, 408 insertions(+) >> create mode 100644 drivers/mtd/parsers/sharpslpart.c >> >> diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig >> index d206b3c..ee5ab99 100644 >> --- a/drivers/mtd/parsers/Kconfig >> +++ b/drivers/mtd/parsers/Kconfig >> @@ -6,3 +6,11 @@ config MTD_PARSER_TRX >> may contain up to 3/4 partitions (depending on the version). >> This driver will parse TRX header and report at least two partitions: >> kernel and rootfs. >> + >> +config MTD_SHARPSL_PARTS >> + tristate "Sharp SL Series NAND flash partition parser" >> + depends on MTD_NAND_SHARPSL || MTD_NAND_TMIO || COMPILE_TEST >> + help >> + This provides the read-only FTL logic necessary to read the partition >> + table from the NAND flash of Sharp SL Series (Zaurus) and the MTD >> + partition parser using this code. >> diff --git a/drivers/mtd/parsers/Makefile b/drivers/mtd/parsers/Makefile >> index 4d9024e..5b1bcc3 100644 >> --- a/drivers/mtd/parsers/Makefile >> +++ b/drivers/mtd/parsers/Makefile >> @@ -1 +1,2 @@ >> obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o >> +obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o >> diff --git a/drivers/mtd/parsers/sharpslpart.c b/drivers/mtd/parsers/sharpslpart.c >> new file mode 100644 >> index 0000000..5fddeba >> --- /dev/null >> +++ b/drivers/mtd/parsers/sharpslpart.c >> @@ -0,0 +1,399 @@ >> +/* >> + * sharpslpart.c - MTD partition parser for NAND flash using the SHARP FTL >> + * for logical addressing, as used on the PXA models of the SHARP SL Series. >> + * >> + * Copyright (C) 2017 Andrea Adami >> + * >> + * Based on SHARP GPL 2.4 sources: >> + * http://support.ezaurus.com/developer/source/source_dl.asp >> + * drivers/mtd/nand/sharp_sl_logical.c >> + * linux/include/asm-arm/sharp_nand_logical.h >> + * >> + * Copyright (C) 2002 SHARP >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License as published by >> + * the Free Software Foundation; either version 2 of the License, or >> + * (at your option) any later version. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + */ >> + >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> + >> +/* oob structure */ >> +#define NAND_NOOB_LOGADDR_00 8 >> +#define NAND_NOOB_LOGADDR_01 9 >> +#define NAND_NOOB_LOGADDR_10 10 >> +#define NAND_NOOB_LOGADDR_11 11 >> +#define NAND_NOOB_LOGADDR_20 12 >> +#define NAND_NOOB_LOGADDR_21 13 >> + >> +#define BLOCK_IS_RESERVED 0xffff >> +#define BLOCK_UNMASK_COMPLEMENT 1 >> + >> +/* factory defaults */ >> +#define SHARPSL_NAND_PARTS 3 >> +#define SHARPSL_FTL_PART_SIZE (7 * SZ_1M) >> +#define SHARPSL_PARTINFO1_LADDR 0x00060000 >> +#define SHARPSL_PARTINFO2_LADDR 0x00064000 >> + >> +#define BOOT_MAGIC 0x424f4f54 >> +#define FSRO_MAGIC 0x4653524f >> +#define FSRW_MAGIC 0x46535257 >> + >> +/** >> + * struct sharpsl_ftl - Sharp FTL Logical Table >> + * @logmax: number of logical blocks >> + * @log2phy: the logical-to-physical table >> + * >> + * Structure containing the logical-to-physical translation table >> + * used by the SHARP SL FTL. >> + */ >> +struct sharpsl_ftl { >> + unsigned int logmax; >> + unsigned int *log2phy; >> +}; >> + >> +static int sharpsl_nand_check_ooblayout(struct mtd_info *mtd) >> +{ >> + u8 freebytes = 0; >> + int section = 0; >> + >> + while (true) { >> + struct mtd_oob_region oobfree = { }; >> + int ret, i; >> + >> + ret = mtd_ooblayout_free(mtd, section++, &oobfree); >> + if (ret) >> + break; >> + >> + if (!oobfree.length || oobfree.offset > 15 || >> + (oobfree.offset + oobfree.length) < 8) >> + continue; >> + >> + i = oobfree.offset >= 8 ? oobfree.offset : 8; >> + for (; i < oobfree.offset + oobfree.length && i < 16; i++) >> + freebytes |= BIT(i - 8); >> + >> + if (freebytes == 0xff) >> + return 0; > > I think this function deserves a comment explaining what you're doing: > checking that bytes 8 to 15 of the OOB area are free. > Ah, ok, I put the description down before the function call. I'll add a short text here as well. >> + } >> + >> + return -ENOTSUPP; >> +} >> + >> +static int sharpsl_nand_read_oob(struct mtd_info *mtd, loff_t offs, >> + uint8_t *buf) > > u8 *buf > Ok, replaced >> +{ >> + struct mtd_oob_ops ops = { }; >> + int ret; >> + >> + ops.mode = MTD_OPS_PLACE_OOB; >> + ops.ooblen = mtd->oobsize; >> + ops.oobbuf = buf; >> + >> + ret = mtd_read_oob(mtd, offs, &ops); >> + if (ret != 0 || mtd->oobsize != ops.oobretlen) >> + return -1; >> + >> + return 0; >> +} >> + >> +/* >> + * The logical block number assigned to a physical block is stored in the OOB >> + * of the first page, in 3 16-bit copies with the following layout: >> + * >> + * 01234567 89abcdef >> + * -------- -------- >> + * ECC BB xyxyxy >> + * >> + * When reading we check that the first two copies agree. >> + * In case of error, matching is tried using the following pairs. >> + * Reserved values 0xffff mean the block is kept for wear leveling. >> + * >> + * 01234567 89abcdef >> + * -------- -------- >> + * ECC BB xyxy oob[8]==oob[10] && oob[9]==oob[11] -> byte0=8 byte1=9 >> + * ECC BB xyxy oob[10]==oob[12] && oob[11]==oob[13] -> byte0=10 byte1=11 >> + * ECC BB xy xy oob[12]==oob[8] && oob[13]==oob[9] -> byte0=12 byte1=13 >> + * > > There's still an extra/unneeded blank line here. > Removed >> + */ >> +static int sharpsl_nand_get_logical_num(u8 *oob) >> +{ >> + u16 us; >> + int good0, good1; >> + >> + if (oob[NAND_NOOB_LOGADDR_00] == oob[NAND_NOOB_LOGADDR_10] && >> + oob[NAND_NOOB_LOGADDR_01] == oob[NAND_NOOB_LOGADDR_11]) { >> + good0 = NAND_NOOB_LOGADDR_00; >> + good1 = NAND_NOOB_LOGADDR_01; >> + } else if (oob[NAND_NOOB_LOGADDR_10] == oob[NAND_NOOB_LOGADDR_20] && >> + oob[NAND_NOOB_LOGADDR_11] == oob[NAND_NOOB_LOGADDR_21]) { >> + good0 = NAND_NOOB_LOGADDR_10; >> + good1 = NAND_NOOB_LOGADDR_11; >> + } else if (oob[NAND_NOOB_LOGADDR_20] == oob[NAND_NOOB_LOGADDR_00] && >> + oob[NAND_NOOB_LOGADDR_21] == oob[NAND_NOOB_LOGADDR_01]) { >> + good0 = NAND_NOOB_LOGADDR_20; >> + good1 = NAND_NOOB_LOGADDR_21; >> + } else { >> + return -EINVAL; >> + } >> + >> + us = oob[good0] | oob[good1] << 8; >> + >> + /* parity check */ >> + if (hweight16(us) & BLOCK_UNMASK_COMPLEMENT) >> + return -EINVAL; >> + >> + /* reserved */ >> + if (us == BLOCK_IS_RESERVED) >> + return BLOCK_IS_RESERVED; >> + >> + return (us >> 1) & GENMASK(9, 0); >> +} >> + >> +static int sharpsl_nand_init_ftl(struct mtd_info *mtd, struct sharpsl_ftl *ftl) >> +{ >> + unsigned int block_num, log_num, phymax; >> + loff_t block_adr; >> + u8 *oob; >> + int i, ret; >> + >> + oob = kzalloc(mtd->oobsize, GFP_KERNEL); >> + if (!oob) >> + return -ENOMEM; >> + >> + phymax = mtd_div_by_eb(SHARPSL_FTL_PART_SIZE, mtd); >> + >> + /* FTL reserves 5% of the blocks + 1 spare */ >> + ftl->logmax = ((phymax * 95) / 100) - 1; >> + >> + ftl->log2phy = kmalloc_array(ftl->logmax, sizeof(*ftl->log2phy), >> + GFP_KERNEL); >> + if (!ftl->log2phy) { >> + ret = -ENOMEM; >> + goto exit; >> + } >> + >> + /* initialize ftl->log2phy */ >> + for (i = 0; i < ftl->logmax; i++) >> + ftl->log2phy[i] = UINT_MAX; >> + >> + /* create physical-logical table */ >> + for (block_num = 0; block_num < phymax; block_num++) { >> + block_adr = block_num * mtd->erasesize; >> + >> + if (mtd_block_isbad(mtd, block_adr)) >> + continue; >> + >> + if (sharpsl_nand_read_oob(mtd, block_adr, oob)) >> + continue; >> + >> + /* get logical block */ >> + log_num = sharpsl_nand_get_logical_num(oob); >> + >> + /* cut-off errors and skip the out-of-range values */ >> + if (log_num > 0 && log_num < ftl->logmax) { >> + if (ftl->log2phy[log_num] == UINT_MAX) >> + ftl->log2phy[log_num] = block_num; >> + } >> + } >> + >> + pr_info("Sharp SL FTL: %d blocks used (%d logical, %d reserved)\n", >> + phymax, ftl->logmax, phymax - ftl->logmax); >> + >> + ret = 0; >> +exit: >> + kfree(oob); >> + return ret; >> +} >> + >> +void sharpsl_nand_cleanup_ftl(struct sharpsl_ftl *ftl) >> +{ >> + kfree(ftl->log2phy); >> +} >> + >> +static int sharpsl_nand_read_laddr(struct mtd_info *mtd, >> + loff_t from, >> + size_t len, >> + void *buf, >> + struct sharpsl_ftl *ftl) >> +{ >> + unsigned int log_num, final_log_num; >> + unsigned int block_num; >> + loff_t block_adr; >> + loff_t block_ofs; >> + size_t retlen; >> + int err; >> + >> + log_num = mtd_div_by_eb((u32)from, mtd); >> + final_log_num = mtd_div_by_eb(((u32)from + len - 1), mtd); >> + >> + if (len <= 0 || log_num >= ftl->logmax || final_log_num > log_num) >> + return -EINVAL; >> + >> + block_num = ftl->log2phy[log_num]; >> + block_adr = block_num * mtd->erasesize; >> + block_ofs = mtd_mod_by_eb((u32)from, mtd); >> + >> + err = mtd_read(mtd, block_adr + block_ofs, len, &retlen, buf); >> + /* Ignore corrected ECC errors */ >> + if (mtd_is_bitflip(err)) >> + err = 0; >> + >> + if (!err && retlen != len) >> + err = -EIO; >> + >> + if (err) >> + pr_err("sharpslpart: error, read failed at %#llx\n", >> + block_adr + block_ofs); >> + >> + return err; >> +} >> + >> +/* >> + * MTD Partition Parser >> + * >> + * Sample values read from SL-C860 >> + * >> + * # cat /proc/mtd >> + * dev: size erasesize name >> + * mtd0: 006d0000 00020000 "Filesystem" >> + * mtd1: 00700000 00004000 "smf" >> + * mtd2: 03500000 00004000 "root" >> + * mtd3: 04400000 00004000 "home" >> + * >> + * PARTITIONINFO1 >> + * 0x00060000: 00 00 00 00 00 00 70 00 42 4f 4f 54 00 00 00 00 ......p.BOOT.... >> + * 0x00060010: 00 00 70 00 00 00 c0 03 46 53 52 4f 00 00 00 00 ..p.....FSRO.... >> + * 0x00060020: 00 00 c0 03 00 00 00 04 46 53 52 57 00 00 00 00 ........FSRW.... >> + * > > Ditto: remove the empty comment line from this comment. > Removed >> + */ >> +struct sharpsl_nand_partinfo { >> + __le32 start; >> + __le32 end; >> + __be32 magic; >> + u32 reserved; >> +}; >> + >> +static int sharpsl_nand_read_partinfo(struct mtd_info *master, >> + loff_t from, >> + size_t len, >> + struct sharpsl_nand_partinfo *buf, >> + struct sharpsl_ftl *ftl) >> +{ >> + int ret; >> + >> + ret = sharpsl_nand_read_laddr(master, from, len, buf, ftl); >> + if (ret) >> + return ret; >> + >> + /* check for magics */ >> + if (be32_to_cpu(buf[0].magic) != BOOT_MAGIC || >> + be32_to_cpu(buf[1].magic) != FSRO_MAGIC || >> + be32_to_cpu(buf[2].magic) != FSRW_MAGIC) { >> + pr_err("sharpslpart: magic values mismatch\n"); >> + return -EINVAL; >> + } >> + >> + /* fixup for hardcoded value 64 MiB (for older models) */ >> + buf[2].end = cpu_to_le32(master->size); >> + >> + /* extra sanity check */ >> + if (le32_to_cpu(buf[0].end) <= le32_to_cpu(buf[0].start) || >> + le32_to_cpu(buf[1].start) < le32_to_cpu(buf[0].end) || >> + le32_to_cpu(buf[1].end) <= le32_to_cpu(buf[1].start) || >> + le32_to_cpu(buf[2].start) < le32_to_cpu(buf[1].end) || >> + le32_to_cpu(buf[2].end) <= le32_to_cpu(buf[2].start)) { >> + pr_err("sharpslpart: partition sizes mismatch\n"); >> + return -EINVAL; >> + } >> + >> + return 0; >> +} >> + >> +static int sharpsl_parse_mtd_partitions(struct mtd_info *master, >> + const struct mtd_partition **pparts, >> + struct mtd_part_parser_data *data) >> +{ >> + struct sharpsl_ftl ftl; >> + struct sharpsl_nand_partinfo buf[SHARPSL_NAND_PARTS]; >> + struct mtd_partition *sharpsl_nand_parts; >> + int err; >> + >> + /* check that OOB bytes 8 to 15 used by the FTL are actually free */ >> + err = sharpsl_nand_check_ooblayout(master); >> + if (err) >> + return err; >> + >> + /* init logical mgmt (FTL) */ >> + err = sharpsl_nand_init_ftl(master, &ftl); >> + if (err) >> + return err; >> + >> + /* read and validate first partition table */ >> + pr_info("sharpslpart: try reading first partition table\n"); >> + err = sharpsl_nand_read_partinfo(master, >> + SHARPSL_PARTINFO1_LADDR, >> + sizeof(buf), buf, &ftl); >> + if (err) { >> + /* fallback: read second partition table */ >> + pr_warn("sharpslpart: first partition table is invalid, retry using the second\n"); >> + err = sharpsl_nand_read_partinfo(master, >> + SHARPSL_PARTINFO2_LADDR, >> + sizeof(buf), buf, &ftl); >> + } >> + >> + /* cleanup logical mgmt (FTL) */ >> + sharpsl_nand_cleanup_ftl(&ftl); >> + >> + if (err) { >> + pr_err("sharpslpart: both partition tables are invalid\n"); >> + return err; >> + } >> + >> + sharpsl_nand_parts = kzalloc(sizeof(*sharpsl_nand_parts) * >> + SHARPSL_NAND_PARTS, GFP_KERNEL); >> + if (!sharpsl_nand_parts) >> + return -ENOMEM; >> + >> + /* original names */ >> + sharpsl_nand_parts[0].name = "smf"; >> + sharpsl_nand_parts[0].offset = le32_to_cpu(buf[0].start); >> + sharpsl_nand_parts[0].size = le32_to_cpu(buf[0].end) - >> + le32_to_cpu(buf[0].start); >> + >> + sharpsl_nand_parts[1].name = "root"; >> + sharpsl_nand_parts[1].offset = le32_to_cpu(buf[1].start); >> + sharpsl_nand_parts[1].size = le32_to_cpu(buf[1].end) - >> + le32_to_cpu(buf[1].start); >> + >> + sharpsl_nand_parts[2].name = "home"; >> + sharpsl_nand_parts[2].offset = le32_to_cpu(buf[2].start); >> + sharpsl_nand_parts[2].size = le32_to_cpu(buf[2].end) - >> + le32_to_cpu(buf[2].start); >> + >> + *pparts = sharpsl_nand_parts; >> + return SHARPSL_NAND_PARTS; >> +} >> + >> +static struct mtd_part_parser sharpsl_mtd_parser = { >> + .parse_fn = sharpsl_parse_mtd_partitions, >> + .name = "sharpslpart", >> +}; >> +module_mtd_part_parser(sharpsl_mtd_parser); >> + >> +MODULE_LICENSE("GPL"); >> +MODULE_AUTHOR("Andrea Adami "); >> +MODULE_DESCRIPTION("MTD partitioning for NAND flash on Sharp SL Series"); > Thanks, I'll send v8. Regards Andrea