From: Chunyan Zhang <zhang.lyra@gmail.com>
To: Baolin Wang <baolin.wang7@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>,
Orson Zhai <orsonzhai@gmail.com>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] mfd: sprd: Add wakeup capability for PMIC irq
Date: Mon, 25 May 2020 16:06:09 +0800 [thread overview]
Message-ID: <CAAfSe-s6Tp=4QQzU-=YSL9R5LkqAZVQTsWCiQgkgNmyDuM366Q@mail.gmail.com> (raw)
In-Reply-To: <7361f34d712b027f0cd85dc36ee158f9b6076cef.1588833125.git.baolin.wang7@gmail.com>
On Thu, 7 May 2020 at 14:40, Baolin Wang <baolin.wang7@gmail.com> wrote:
>
> When changing to use suspend-to-idle to save power, the PMIC irq can not
> wakeup the system due to lack of wakeup capability, which will cause
> the sub-irqs (such as power key) of the PMIC can not wake up the system.
> Thus we can add the wakeup capability for PMIC irq to solve this issue,
> as well as removing the IRQF_NO_SUSPEND flag to allow PMIC irq to be
> a wakeup source.
>
> Reported-by: Chunyan Zhang <zhang.lyra@gmail.com>
> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Thanks for fixing this issue, with this patch, power key can wakeup
s2idle correctly on my sprd board.
Tested-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
> ---
> drivers/mfd/sprd-sc27xx-spi.c | 30 +++++++++++++++++++++++++++++-
> 1 file changed, 29 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mfd/sprd-sc27xx-spi.c b/drivers/mfd/sprd-sc27xx-spi.c
> index ebdf2f1..3064a60 100644
> --- a/drivers/mfd/sprd-sc27xx-spi.c
> +++ b/drivers/mfd/sprd-sc27xx-spi.c
> @@ -256,7 +256,7 @@ static int sprd_pmic_probe(struct spi_device *spi)
> }
>
> ret = devm_regmap_add_irq_chip(&spi->dev, ddata->regmap, ddata->irq,
> - IRQF_ONESHOT | IRQF_NO_SUSPEND, 0,
> + IRQF_ONESHOT, 0,
> &ddata->irq_chip, &ddata->irq_data);
> if (ret) {
> dev_err(&spi->dev, "Failed to add PMIC irq chip %d\n", ret);
> @@ -272,9 +272,36 @@ static int sprd_pmic_probe(struct spi_device *spi)
> return ret;
> }
>
> + device_init_wakeup(&spi->dev, 1);
> return 0;
> }
>
> +#ifdef CONFIG_PM_SLEEP
> +static int sprd_pmic_suspend(struct device *dev)
> +{
> + struct spi_device *spi = to_spi_device(dev);
> + struct sprd_pmic *ddata = spi_get_drvdata(spi);
> +
> + if (device_may_wakeup(dev))
> + enable_irq_wake(ddata->irq);
> +
> + return 0;
> +}
> +
> +static int sprd_pmic_resume(struct device *dev)
> +{
> + struct spi_device *spi = to_spi_device(dev);
> + struct sprd_pmic *ddata = spi_get_drvdata(spi);
> +
> + if (device_may_wakeup(dev))
> + disable_irq_wake(ddata->irq);
> +
> + return 0;
> +}
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(sprd_pmic_pm_ops, sprd_pmic_suspend, sprd_pmic_resume);
> +
> static const struct of_device_id sprd_pmic_match[] = {
> { .compatible = "sprd,sc2731", .data = &sc2731_data },
> {},
> @@ -286,6 +313,7 @@ static int sprd_pmic_probe(struct spi_device *spi)
> .name = "sc27xx-pmic",
> .bus = &spi_bus_type,
> .of_match_table = sprd_pmic_match,
> + .pm = &sprd_pmic_pm_ops,
> },
> .probe = sprd_pmic_probe,
> };
> --
> 1.9.1
>
next prev parent reply other threads:[~2020-05-25 8:06 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-07 6:40 [PATCH] mfd: sprd: Add wakeup capability for PMIC irq Baolin Wang
2020-05-25 8:06 ` Chunyan Zhang [this message]
2020-05-26 8:23 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAAfSe-s6Tp=4QQzU-=YSL9R5LkqAZVQTsWCiQgkgNmyDuM366Q@mail.gmail.com' \
--to=zhang.lyra@gmail.com \
--cc=baolin.wang7@gmail.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=orsonzhai@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).