Re: [PATCH V3 3/4] dt-bindings: serial: add a new compatible string for SC9860

[Chunyan Zhang <zhang.lyra@gmail.com>]

On 3 March 2017 at 14:21, Rob Herring <robh@kernel.org> wrote:
> On Thu, Mar 02, 2017 at 02:22:09PM +0800, Chunyan Zhang wrote:
>> SC9860 use the same serial device, so added a new compatible string to
>> support SC9860 as well, also added an example of how to describe this
>> serial device in DT.
>>
>> Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
>> ---
>>  Documentation/devicetree/bindings/serial/sprd-uart.txt | 15 ++++++++++++++-
>>  1 file changed, 14 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.txt b/Documentation/devicetree/bindings/serial/sprd-uart.txt
>> index 2aff0f2..8bd8144 100644
>> --- a/Documentation/devicetree/bindings/serial/sprd-uart.txt
>> +++ b/Documentation/devicetree/bindings/serial/sprd-uart.txt
>> @@ -1,7 +1,20 @@
>>  * Spreadtrum serial UART
>>
>>  Required properties:
>> -- compatible: must be "sprd,sc9836-uart"
>> +- compatible must contain:
>> +  * "sprd,sc9836-uart" for SC9836 and all Spreadtrum SoCs
>> +  This also can be specific with:
>> +  * "sprd,sc9860-uart" for SC9860
>
> Just say:
>
> - compatible: must be one of:
>         "sprd,sc9836-uart"
>         "sprd,sc9860-uart", "sprd,sc9836-uart"
>
>> +
>>  - reg: offset and length of the register set for the device
>>  - interrupts: exactly one interrupt specifier
>>  - clocks: phandles to input clocks.
>> +
>> +Example:
>> +     uart0: serial@70000000 {
>> +             compatible = "sprd,sc9860-uart",
>> +                          "sprd,sc9836-uart";
>> +             reg = <0x000000 0x100>;
>
> unit address doesn't match the reg property.

OK, I will revise dts file accordingly.

Thanks,
Chunyan

>
>> +             interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
>> +             clocks = <&ext_26m>;
>> +     };
>> --
>> 2.7.4
>>