linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [RFC PATCH v3 00/11] Linux RISC-V ACLINT Support
@ 2021-08-30  4:17 Anup Patel
  2021-08-30  4:17 ` [RFC PATCH v3 01/11] RISC-V: Clear SIP bit only when using SBI IPI operations Anup Patel
                   ` (10 more replies)
  0 siblings, 11 replies; 22+ messages in thread
From: Anup Patel @ 2021-08-30  4:17 UTC (permalink / raw)
  To: Palmer Dabbelt, Palmer Dabbelt, Paul Walmsley, Thomas Gleixner,
	Marc Zyngier, Daniel Lezcano, Rob Herring
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, devicetree, Anup Patel

Most of the existing RISC-V platforms use SiFive CLINT to provide M-level
timer and IPI support whereas S-level uses SBI calls for timer and IPI
support. Also, the SiFive CLINT device is a single device providing both
timer and IPI functionality so RISC-V platforms can't partially implement
SiFive CLINT device and provide alternate mechanism for timer and IPI.

The RISC-V Advacned Core Local Interruptor (ACLINT) tries to address the
limitations of SiFive CLINT by:
1) Taking modular approach and defining timer and IPI functionality as
   separate devices so that RISC-V platforms can include only required
   devices
2) Providing dedicated MMIO device for S-level IPIs so that SBI calls
   can be avoided for IPIs in Linux RISC-V
3) Allowing multiple instances of timer and IPI devices for a
   multi-socket (or multi-die) NUMA systems
4) Being backward compatible to SiFive CLINT so that existing RISC-V
   platforms stay compliant with RISC-V ACLINT specification

Latest RISC-V ACLINT specification (to be frozen soon) can be found at:
https://github.com/riscv/riscv-aclint/blob/main/riscv-aclint.adoc

This series adds RISC-V ACLINT support and can be found in the
riscv_aclint_v3 branch at:
https://github.com/avpatel/linux

To test this series, the RISC-V ACLINT support for QEMU can be found
in the riscv_aclint_v3 branch at:
https://github.com/avpatel/qemu

Changes since v2:
 - Addresed Rob's comments on [M|S]SWI DT bindings
 - Dropped PATCH2 because it was not a required change
 - Addressed Marc's comments on ACLINT SWI driver added by PATCH7
 - Added a separate PATCH6 to update SiFive CLINT DT bindings

Changes since v1:
 - Added a new PATCH3 to treat IPIs as normal Linux IRQs for RISC-V kernel
 - New SBI IPI call based irqchip driver in PATCH3 which is only initialized
   by riscv_ipi_setup() when no Linux IRQ numbers are available for IPIs
 - Moved DT bindings patches before corresponding driver patches
 - Implemented ACLINT SWI driver as a irqchip driver in PATCH7
 - Minor nit fixes pointed by Bin Meng

Anup Patel (11):
  RISC-V: Clear SIP bit only when using SBI IPI operations
  RISC-V: Treat IPIs as normal Linux IRQs
  RISC-V: Allow marking IPIs as suitable for remote FENCEs
  RISC-V: Use IPIs for remote TLB flush when possible
  dt-bindings: interrupt-controller: Add ACLINT MSWI and SSWI bindings
  dt-bindings: timer: Update SiFive CLINT bindings for IPI support
  irqchip: Add ACLINT software interrupt driver
  RISC-V: Select ACLINT SWI driver for virt machine
  dt-bindings: timer: Add ACLINT MTIMER bindings
  clocksource: clint: Add support for ACLINT MTIMER device
  MAINTAINERS: Add entry for RISC-V ACLINT drivers

 .../riscv,aclint-swi.yaml                     |  95 +++++++
 .../bindings/timer/riscv,aclint-mtimer.yaml   |  70 +++++
 .../bindings/timer/sifive,clint.yaml          |  20 +-
 MAINTAINERS                                   |   9 +
 arch/riscv/Kconfig                            |   1 +
 arch/riscv/Kconfig.socs                       |   1 +
 arch/riscv/boot/dts/canaan/k210.dtsi          |   2 +
 .../boot/dts/microchip/microchip-mpfs.dtsi    |   2 +
 arch/riscv/include/asm/sbi.h                  |   2 +
 arch/riscv/include/asm/smp.h                  |  48 +++-
 arch/riscv/kernel/Makefile                    |   1 +
 arch/riscv/kernel/cpu-hotplug.c               |   2 +
 arch/riscv/kernel/irq.c                       |   1 +
 arch/riscv/kernel/sbi-ipi.c                   | 215 ++++++++++++++
 arch/riscv/kernel/sbi.c                       |  15 -
 arch/riscv/kernel/smp.c                       | 172 ++++++------
 arch/riscv/kernel/smpboot.c                   |   4 +-
 arch/riscv/mm/tlbflush.c                      |  91 ++++--
 drivers/clocksource/timer-clint.c             |  69 +++--
 drivers/irqchip/Kconfig                       |   9 +
 drivers/irqchip/Makefile                      |   1 +
 drivers/irqchip/irq-riscv-aclint-swi.c        | 265 ++++++++++++++++++
 drivers/irqchip/irq-riscv-intc.c              |  55 ++--
 23 files changed, 946 insertions(+), 204 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml
 create mode 100644 Documentation/devicetree/bindings/timer/riscv,aclint-mtimer.yaml
 create mode 100644 arch/riscv/kernel/sbi-ipi.c
 create mode 100644 drivers/irqchip/irq-riscv-aclint-swi.c

-- 
2.25.1


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [RFC PATCH v3 01/11] RISC-V: Clear SIP bit only when using SBI IPI operations
  2021-08-30  4:17 [RFC PATCH v3 00/11] Linux RISC-V ACLINT Support Anup Patel
@ 2021-08-30  4:17 ` Anup Patel
  2021-08-30  4:17 ` [RFC PATCH v3 02/11] RISC-V: Treat IPIs as normal Linux IRQs Anup Patel
                   ` (9 subsequent siblings)
  10 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2021-08-30  4:17 UTC (permalink / raw)
  To: Palmer Dabbelt, Palmer Dabbelt, Paul Walmsley, Thomas Gleixner,
	Marc Zyngier, Daniel Lezcano, Rob Herring
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, devicetree, Anup Patel, Bin Meng

The software interrupt pending (i.e. [M|S]SIP) bit is writeable for
S-mode but read-only for M-mode so we clear this bit only when using
SBI IPI operations.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
---
 arch/riscv/kernel/sbi.c | 8 +++++++-
 arch/riscv/kernel/smp.c | 2 --
 2 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
index 9a84f0cb5175..8aeca26198f2 100644
--- a/arch/riscv/kernel/sbi.c
+++ b/arch/riscv/kernel/sbi.c
@@ -598,8 +598,14 @@ static void sbi_send_cpumask_ipi(const struct cpumask *target)
 	sbi_send_ipi(cpumask_bits(&hartid_mask));
 }
 
+static void sbi_ipi_clear(void)
+{
+	csr_clear(CSR_IP, IE_SIE);
+}
+
 static const struct riscv_ipi_ops sbi_ipi_ops = {
-	.ipi_inject = sbi_send_cpumask_ipi
+	.ipi_inject = sbi_send_cpumask_ipi,
+	.ipi_clear = sbi_ipi_clear
 };
 
 void __init sbi_init(void)
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index 921d9d7df400..547dc508f7d1 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -99,8 +99,6 @@ void riscv_clear_ipi(void)
 {
 	if (ipi_ops && ipi_ops->ipi_clear)
 		ipi_ops->ipi_clear();
-
-	csr_clear(CSR_IP, IE_SIE);
 }
 EXPORT_SYMBOL_GPL(riscv_clear_ipi);
 
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [RFC PATCH v3 02/11] RISC-V: Treat IPIs as normal Linux IRQs
  2021-08-30  4:17 [RFC PATCH v3 00/11] Linux RISC-V ACLINT Support Anup Patel
  2021-08-30  4:17 ` [RFC PATCH v3 01/11] RISC-V: Clear SIP bit only when using SBI IPI operations Anup Patel
@ 2021-08-30  4:17 ` Anup Patel
  2021-08-30  4:17 ` [RFC PATCH v3 03/11] RISC-V: Allow marking IPIs as suitable for remote FENCEs Anup Patel
                   ` (8 subsequent siblings)
  10 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2021-08-30  4:17 UTC (permalink / raw)
  To: Palmer Dabbelt, Palmer Dabbelt, Paul Walmsley, Thomas Gleixner,
	Marc Zyngier, Daniel Lezcano, Rob Herring
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, devicetree, Anup Patel

Currently, the RISC-V kernel provides arch specific hooks (i.e.
struct riscv_ipi_ops) to register IPI handling methods. The stats
gathering of IPIs is also arch specific in the RISC-V kernel.

Other architectures (such as ARM, ARM64, and MIPS) have moved away
from custom arch specific IPI handling methods. Currently, these
architectures have Linux irqchip drivers providing a range of Linux
IRQ numbers to be used as IPIs and IPI triggering is done using
generic IPI APIs. This approach allows architectures to treat IPIs
as normal Linux IRQs and IPI stats gathering is done by the generic
Linux IRQ subsystem.

We extend the RISC-V IPI handling as-per above approach so that
arch specific IPI handling methods (struct riscv_ipi_ops) can be
removed and the IPI handling is totally contained within Linux
irqchip drivers.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
---
 arch/riscv/Kconfig                |   1 +
 arch/riscv/include/asm/sbi.h      |   2 +
 arch/riscv/include/asm/smp.h      |  34 +++--
 arch/riscv/kernel/Makefile        |   1 +
 arch/riscv/kernel/cpu-hotplug.c   |   2 +
 arch/riscv/kernel/irq.c           |   1 +
 arch/riscv/kernel/sbi-ipi.c       | 215 ++++++++++++++++++++++++++++++
 arch/riscv/kernel/sbi.c           |  21 ---
 arch/riscv/kernel/smp.c           | 163 +++++++++++-----------
 arch/riscv/kernel/smpboot.c       |   4 +-
 drivers/clocksource/timer-clint.c |  23 ----
 drivers/irqchip/irq-riscv-intc.c  |  55 ++++----
 12 files changed, 350 insertions(+), 172 deletions(-)
 create mode 100644 arch/riscv/kernel/sbi-ipi.c

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index ab66daadff42..179a14d9e241 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -50,6 +50,7 @@ config RISCV
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_GETTIMEOFDAY if HAVE_GENERIC_VDSO
 	select GENERIC_IOREMAP
+	select GENERIC_IRQ_IPI
 	select GENERIC_IRQ_MULTI_HANDLER
 	select GENERIC_IRQ_SHOW
 	select GENERIC_LIB_DEVMEM_IS_ALLOWED
diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
index 289621da4a2a..a992faeded7e 100644
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@ -106,6 +106,7 @@ struct sbiret {
 };
 
 void sbi_init(void);
+void sbi_ipi_init(void);
 struct sbiret sbi_ecall(int ext, int fid, unsigned long arg0,
 			unsigned long arg1, unsigned long arg2,
 			unsigned long arg3, unsigned long arg4,
@@ -175,6 +176,7 @@ static inline unsigned long sbi_mk_version(unsigned long major,
 int sbi_err_map_linux_errno(int err);
 #else /* CONFIG_RISCV_SBI */
 static inline int sbi_remote_fence_i(const unsigned long *hart_mask) { return -1; }
+static inline void sbi_ipi_init(void) { }
 static inline void sbi_init(void) {}
 #endif /* CONFIG_RISCV_SBI */
 #endif /* _ASM_RISCV_SBI_H */
diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h
index a7d2811f3536..6bdaab122ffa 100644
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -15,11 +15,6 @@
 struct seq_file;
 extern unsigned long boot_cpu_hartid;
 
-struct riscv_ipi_ops {
-	void (*ipi_inject)(const struct cpumask *target);
-	void (*ipi_clear)(void);
-};
-
 #ifdef CONFIG_SMP
 /*
  * Mapping between linux logical cpu index and hartid.
@@ -33,9 +28,6 @@ void show_ipi_stats(struct seq_file *p, int prec);
 /* SMP initialization hook for setup_arch */
 void __init setup_smp(void);
 
-/* Called from C code, this handles an IPI. */
-void handle_IPI(struct pt_regs *regs);
-
 /* Hook for the generic smp_call_function_many() routine. */
 void arch_send_call_function_ipi_mask(struct cpumask *mask);
 
@@ -45,11 +37,17 @@ void arch_send_call_function_single_ipi(int cpu);
 int riscv_hartid_to_cpuid(int hartid);
 void riscv_cpuid_to_hartid_mask(const struct cpumask *in, struct cpumask *out);
 
-/* Set custom IPI operations */
-void riscv_set_ipi_ops(const struct riscv_ipi_ops *ops);
+/* Enable IPI for CPU hotplug */
+void riscv_ipi_enable(void);
+
+/* Disable IPI for CPU hotplug */
+void riscv_ipi_disable(void);
 
-/* Clear IPI for current CPU */
-void riscv_clear_ipi(void);
+/* Setup IPI for boot CPU */
+void riscv_ipi_setup(void);
+
+/* Set the IPI interrupt numbers for arch (called by irqchip drivers) */
+void riscv_ipi_set_virq_range(int virq, int nr_irqs);
 
 /* Secondary hart entry */
 asmlinkage void smp_callin(void);
@@ -92,11 +90,19 @@ static inline void riscv_cpuid_to_hartid_mask(const struct cpumask *in,
 	cpumask_set_cpu(boot_cpu_hartid, out);
 }
 
-static inline void riscv_set_ipi_ops(const struct riscv_ipi_ops *ops)
+static inline void riscv_ipi_enable(void)
+{
+}
+
+static inline void riscv_ipi_disable(void)
+{
+}
+
+static inline void riscv_ipi_setup(void)
 {
 }
 
-static inline void riscv_clear_ipi(void)
+static inline void riscv_ipi_set_virq_range(int virq, int nr)
 {
 }
 
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index 3397ddac1a30..38b555edb2ee 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_RISCV_BASE_PMU)	+= perf_event.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_callchain.o
 obj-$(CONFIG_HAVE_PERF_REGS)	+= perf_regs.o
 obj-$(CONFIG_RISCV_SBI)		+= sbi.o
+obj-$(CONFIG_RISCV_SBI)		+= sbi-ipi.o
 ifeq ($(CONFIG_RISCV_SBI), y)
 obj-$(CONFIG_SMP) += cpu_ops_sbi.o
 endif
diff --git a/arch/riscv/kernel/cpu-hotplug.c b/arch/riscv/kernel/cpu-hotplug.c
index df84e0c13db1..0f662b0113f3 100644
--- a/arch/riscv/kernel/cpu-hotplug.c
+++ b/arch/riscv/kernel/cpu-hotplug.c
@@ -13,6 +13,7 @@
 #include <asm/irq.h>
 #include <asm/cpu_ops.h>
 #include <asm/sbi.h>
+#include <asm/smp.h>
 
 void cpu_stop(void);
 void arch_cpu_idle_dead(void)
@@ -47,6 +48,7 @@ int __cpu_disable(void)
 
 	remove_cpu_topology(cpu);
 	set_cpu_online(cpu, false);
+	riscv_ipi_disable();
 	irq_migrate_all_off_this_cpu();
 
 	return ret;
diff --git a/arch/riscv/kernel/irq.c b/arch/riscv/kernel/irq.c
index 7207fa08d78f..2817900a63e8 100644
--- a/arch/riscv/kernel/irq.c
+++ b/arch/riscv/kernel/irq.c
@@ -21,4 +21,5 @@ void __init init_IRQ(void)
 	irqchip_init();
 	if (!handle_arch_irq)
 		panic("No interrupt controller found.");
+	riscv_ipi_setup();
 }
diff --git a/arch/riscv/kernel/sbi-ipi.c b/arch/riscv/kernel/sbi-ipi.c
new file mode 100644
index 000000000000..dc284ad3551c
--- /dev/null
+++ b/arch/riscv/kernel/sbi-ipi.c
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SBI based IPI support.
+ *
+ * Copyright (c) 2021 Western Digital Corporation or its affiliates.
+ */
+
+#define pr_fmt(fmt) "riscv-sbi-ipi: " fmt
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+#include <asm/sbi.h>
+
+static int intc_parent_irq __ro_after_init;
+static struct irq_domain *sbi_ipi_domain __ro_after_init;
+static DEFINE_PER_CPU(unsigned long, sbi_ipi_bits);
+
+static void sbi_ipi_dummy(struct irq_data *d)
+{
+}
+
+static void sbi_ipi_send_mask(struct irq_data *d, const struct cpumask *mask)
+{
+	int cpu;
+	struct cpumask hartid_mask;
+
+	/* Barrier before doing atomic bit update to IPI bits */
+	smp_mb__before_atomic();
+	for_each_cpu(cpu, mask)
+		set_bit(d->hwirq, per_cpu_ptr(&sbi_ipi_bits, cpu));
+	/* Barrier after doing atomic bit update to IPI bits */
+	smp_mb__after_atomic();
+
+	riscv_cpuid_to_hartid_mask(mask, &hartid_mask);
+
+	sbi_send_ipi(cpumask_bits(&hartid_mask));
+}
+
+static struct irq_chip sbi_ipi_chip = {
+	.name		= "RISC-V SBI IPI",
+	.irq_mask	= sbi_ipi_dummy,
+	.irq_unmask	= sbi_ipi_dummy,
+	.ipi_send_mask	= sbi_ipi_send_mask,
+};
+
+static int sbi_ipi_domain_map(struct irq_domain *d, unsigned int irq,
+			      irq_hw_number_t hwirq)
+{
+	irq_set_percpu_devid(irq);
+	irq_domain_set_info(d, irq, hwirq, &sbi_ipi_chip, d->host_data,
+			    handle_percpu_devid_irq, NULL, NULL);
+
+	return 0;
+}
+
+static int sbi_ipi_domain_alloc(struct irq_domain *d, unsigned int virq,
+				unsigned int nr_irqs, void *arg)
+{
+	int i, ret;
+	irq_hw_number_t hwirq;
+	unsigned int type = IRQ_TYPE_NONE;
+	struct irq_fwspec *fwspec = arg;
+
+	ret = irq_domain_translate_onecell(d, fwspec, &hwirq, &type);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < nr_irqs; i++) {
+		ret = sbi_ipi_domain_map(d, virq + i, hwirq + i);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct irq_domain_ops sbi_ipi_domain_ops = {
+	.translate	= irq_domain_translate_onecell,
+	.alloc		= sbi_ipi_domain_alloc,
+	.free		= irq_domain_free_irqs_top,
+};
+
+static void sbi_ipi_handle_irq(struct irq_desc *desc)
+{
+	int err;
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	unsigned long irqs, *bits = this_cpu_ptr(&sbi_ipi_bits);
+	irq_hw_number_t hwirq;
+
+	chained_irq_enter(chip, desc);
+
+	while (true) {
+		csr_clear(CSR_IP, IE_SIE);
+
+		/* Order bit clearing and data access. */
+		mb();
+
+		irqs = xchg(bits, 0);
+		if (!irqs)
+			goto done;
+
+		for_each_set_bit(hwirq, &irqs, BITS_PER_LONG) {
+			err = generic_handle_domain_irq(sbi_ipi_domain,
+							hwirq);
+			if (unlikely(err))
+				pr_warn_ratelimited(
+					"can't find mapping for hwirq %lu\n",
+					hwirq);
+		}
+	}
+
+done:
+	chained_irq_exit(chip, desc);
+}
+
+static int sbi_ipi_dying_cpu(unsigned int cpu)
+{
+	disable_percpu_irq(intc_parent_irq);
+	return 0;
+}
+
+static int sbi_ipi_starting_cpu(unsigned int cpu)
+{
+	enable_percpu_irq(intc_parent_irq,
+			  irq_get_trigger_type(intc_parent_irq));
+	return 0;
+}
+
+static int __init sbi_ipi_set_virq(void)
+{
+	int virq;
+	struct irq_fwspec ipi = {
+		.fwnode		= sbi_ipi_domain->fwnode,
+		.param_count	= 1,
+		.param[0]	= 0,
+	};
+
+	virq = __irq_domain_alloc_irqs(sbi_ipi_domain, -1, BITS_PER_LONG,
+				       NUMA_NO_NODE, &ipi,
+				       false, NULL);
+	if (virq <= 0) {
+		pr_err("unable to alloc IRQs from SBI IPI IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	riscv_ipi_set_virq_range(virq, BITS_PER_LONG);
+
+	return 0;
+}
+
+static int __init sbi_ipi_domain_init(struct irq_domain *domain)
+{
+	struct irq_fwspec swi = {
+		.fwnode		= domain->fwnode,
+		.param_count	= 1,
+		.param[0]	= RV_IRQ_SOFT,
+	};
+
+	intc_parent_irq = __irq_domain_alloc_irqs(domain, -1, 1,
+						  NUMA_NO_NODE, &swi,
+						  false, NULL);
+	if (intc_parent_irq <= 0) {
+		pr_err("unable to alloc IRQ from INTC IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	irq_set_chained_handler(intc_parent_irq, sbi_ipi_handle_irq);
+
+	sbi_ipi_domain = irq_domain_add_linear(NULL, BITS_PER_LONG,
+						&sbi_ipi_domain_ops, NULL);
+	if (!sbi_ipi_domain) {
+		pr_err("unable to add SBI IPI IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
+			  "irqchip/riscv/sbi-ipi:starting",
+			  sbi_ipi_starting_cpu, sbi_ipi_dying_cpu);
+
+	return sbi_ipi_set_virq();
+}
+
+void __init sbi_ipi_init(void)
+{
+	struct irq_domain *domain = NULL;
+	struct device_node *cpu, *child;
+
+	for_each_of_cpu_node(cpu) {
+		child = of_get_compatible_child(cpu, "riscv,cpu-intc");
+		if (!child) {
+			pr_err("failed to find INTC node [%pOF]\n", cpu);
+			return;
+		}
+
+		domain = irq_find_host(child);
+		of_node_put(child);
+		if (domain)
+			break;
+	}
+	if (!domain) {
+		pr_err("can't find INTC IRQ domain\n");
+		return;
+	}
+
+	if (sbi_ipi_domain_init(domain))
+		pr_err("failed to register IPI domain\n");
+	else
+		pr_info("registered IPI domain\n");
+}
diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
index 8aeca26198f2..372aa7e181d5 100644
--- a/arch/riscv/kernel/sbi.c
+++ b/arch/riscv/kernel/sbi.c
@@ -589,25 +589,6 @@ long sbi_get_mimpid(void)
 	return __sbi_base_ecall(SBI_EXT_BASE_GET_MIMPID);
 }
 
-static void sbi_send_cpumask_ipi(const struct cpumask *target)
-{
-	struct cpumask hartid_mask;
-
-	riscv_cpuid_to_hartid_mask(target, &hartid_mask);
-
-	sbi_send_ipi(cpumask_bits(&hartid_mask));
-}
-
-static void sbi_ipi_clear(void)
-{
-	csr_clear(CSR_IP, IE_SIE);
-}
-
-static const struct riscv_ipi_ops sbi_ipi_ops = {
-	.ipi_inject = sbi_send_cpumask_ipi,
-	.ipi_clear = sbi_ipi_clear
-};
-
 void __init sbi_init(void)
 {
 	int ret;
@@ -654,6 +635,4 @@ void __init sbi_init(void)
 		__sbi_send_ipi	= __sbi_send_ipi_v01;
 		__sbi_rfence	= __sbi_rfence_v01;
 	}
-
-	riscv_set_ipi_ops(&sbi_ipi_ops);
 }
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index 547dc508f7d1..6c9873b7d60e 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -17,6 +17,7 @@
 #include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <linux/delay.h>
+#include <linux/irq.h>
 #include <linux/irq_work.h>
 
 #include <asm/sbi.h>
@@ -41,11 +42,9 @@ void __init smp_setup_processor_id(void)
 	cpuid_to_hartid_map(0) = boot_cpu_hartid;
 }
 
-/* A collection of single bit ipi messages.  */
-static struct {
-	unsigned long stats[IPI_MAX] ____cacheline_aligned;
-	unsigned long bits ____cacheline_aligned;
-} ipi_data[NR_CPUS] __cacheline_aligned;
+static int ipi_virq_base __ro_after_init;
+static int nr_ipi __ro_after_init = IPI_MAX;
+static struct irq_desc *ipi_desc[IPI_MAX] __read_mostly;
 
 int riscv_hartid_to_cpuid(int hartid)
 {
@@ -87,46 +86,14 @@ static void ipi_stop(void)
 		wait_for_interrupt();
 }
 
-static const struct riscv_ipi_ops *ipi_ops __ro_after_init;
-
-void riscv_set_ipi_ops(const struct riscv_ipi_ops *ops)
-{
-	ipi_ops = ops;
-}
-EXPORT_SYMBOL_GPL(riscv_set_ipi_ops);
-
-void riscv_clear_ipi(void)
-{
-	if (ipi_ops && ipi_ops->ipi_clear)
-		ipi_ops->ipi_clear();
-}
-EXPORT_SYMBOL_GPL(riscv_clear_ipi);
-
 static void send_ipi_mask(const struct cpumask *mask, enum ipi_message_type op)
 {
-	int cpu;
-
-	smp_mb__before_atomic();
-	for_each_cpu(cpu, mask)
-		set_bit(op, &ipi_data[cpu].bits);
-	smp_mb__after_atomic();
-
-	if (ipi_ops && ipi_ops->ipi_inject)
-		ipi_ops->ipi_inject(mask);
-	else
-		pr_warn("SMP: IPI inject method not available\n");
+	__ipi_send_mask(ipi_desc[op], mask);
 }
 
 static void send_ipi_single(int cpu, enum ipi_message_type op)
 {
-	smp_mb__before_atomic();
-	set_bit(op, &ipi_data[cpu].bits);
-	smp_mb__after_atomic();
-
-	if (ipi_ops && ipi_ops->ipi_inject)
-		ipi_ops->ipi_inject(cpumask_of(cpu));
-	else
-		pr_warn("SMP: IPI inject method not available\n");
+	__ipi_send_mask(ipi_desc[op], cpumask_of(cpu));
 }
 
 #ifdef CONFIG_IRQ_WORK
@@ -136,62 +103,96 @@ void arch_irq_work_raise(void)
 }
 #endif
 
-void handle_IPI(struct pt_regs *regs)
+static irqreturn_t handle_IPI(int irq, void *data)
 {
-	struct pt_regs *old_regs = set_irq_regs(regs);
-	unsigned long *pending_ipis = &ipi_data[smp_processor_id()].bits;
-	unsigned long *stats = ipi_data[smp_processor_id()].stats;
+	int ipi = irq - ipi_virq_base;
+
+	switch (ipi) {
+	case IPI_RESCHEDULE:
+		scheduler_ipi();
+		break;
+	case IPI_CALL_FUNC:
+		generic_smp_call_function_interrupt();
+		break;
+	case IPI_CPU_STOP:
+		ipi_stop();
+		break;
+	case IPI_IRQ_WORK:
+		irq_work_run();
+		break;
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+	case IPI_TIMER:
+		tick_receive_broadcast();
+		break;
+#endif
+	default:
+		pr_warn("CPU%d: unhandled IPI%d\n", smp_processor_id(), ipi);
+		break;
+	};
+
+	return IRQ_HANDLED;
+}
 
-	irq_enter();
+void riscv_ipi_enable(void)
+{
+	int i;
 
-	riscv_clear_ipi();
+	if (WARN_ON_ONCE(!ipi_virq_base))
+		return;
 
-	while (true) {
-		unsigned long ops;
+	for (i = 0; i < nr_ipi; i++)
+		enable_percpu_irq(ipi_virq_base + i, 0);
+}
 
-		/* Order bit clearing and data access. */
-		mb();
+void riscv_ipi_disable(void)
+{
+	int i;
 
-		ops = xchg(pending_ipis, 0);
-		if (ops == 0)
-			goto done;
+	if (WARN_ON_ONCE(!ipi_virq_base))
+		return;
 
-		if (ops & (1 << IPI_RESCHEDULE)) {
-			stats[IPI_RESCHEDULE]++;
-			scheduler_ipi();
-		}
+	for (i = 0; i < nr_ipi; i++)
+		disable_percpu_irq(ipi_virq_base + i);
+}
 
-		if (ops & (1 << IPI_CALL_FUNC)) {
-			stats[IPI_CALL_FUNC]++;
-			generic_smp_call_function_interrupt();
-		}
+void riscv_ipi_setup(void)
+{
+	int i, err;
 
-		if (ops & (1 << IPI_CPU_STOP)) {
-			stats[IPI_CPU_STOP]++;
-			ipi_stop();
-		}
+	/* SBI based IPIs is our last option */
+	if (!ipi_virq_base)
+		sbi_ipi_init();
 
-		if (ops & (1 << IPI_IRQ_WORK)) {
-			stats[IPI_IRQ_WORK]++;
-			irq_work_run();
-		}
+	/* If still don't have IPIs then do nothing */
+	if (!ipi_virq_base) {
+		pr_info("SMP: IPIs not available\n");
+		return;
+	}
 
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
-		if (ops & (1 << IPI_TIMER)) {
-			stats[IPI_TIMER]++;
-			tick_receive_broadcast();
-		}
-#endif
-		BUG_ON((ops >> IPI_MAX) != 0);
+	/* Request IPIs */
+	for (i = 0; i < nr_ipi; i++) {
+		err = request_percpu_irq(ipi_virq_base + i, handle_IPI,
+					 "IPI", &ipi_virq_base);
+		WARN_ON(err);
 
-		/* Order data access and bit testing. */
-		mb();
+		ipi_desc[i] = irq_to_desc(ipi_virq_base + i);
+		irq_set_status_flags(ipi_virq_base + i, IRQ_HIDDEN);
 	}
 
-done:
-	irq_exit();
-	set_irq_regs(old_regs);
+	/* Enabled IPIs for boot CPU immediately */
+	riscv_ipi_enable();
+}
+
+void riscv_ipi_set_virq_range(int virq, int nr)
+{
+	if (WARN_ON(ipi_virq_base))
+		return;
+
+	WARN_ON(nr < IPI_MAX);
+	nr_ipi = min(nr, IPI_MAX);
+	ipi_virq_base = virq;
 }
+EXPORT_SYMBOL_GPL(riscv_ipi_set_virq_range);
 
 static const char * const ipi_names[] = {
 	[IPI_RESCHEDULE]	= "Rescheduling interrupts",
@@ -209,7 +210,7 @@ void show_ipi_stats(struct seq_file *p, int prec)
 		seq_printf(p, "%*s%u:%s", prec - 1, "IPI", i,
 			   prec >= 4 ? " " : "");
 		for_each_online_cpu(cpu)
-			seq_printf(p, "%10lu ", ipi_data[cpu].stats[i]);
+			seq_printf(p, "%10u ", irq_desc_kstat_cpu(ipi_desc[i], cpu));
 		seq_printf(p, " %s\n", ipi_names[i]);
 	}
 }
diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index bd82375db51a..a64b5e194e1e 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -159,12 +159,12 @@ asmlinkage __visible void smp_callin(void)
 	struct mm_struct *mm = &init_mm;
 	unsigned int curr_cpuid = smp_processor_id();
 
-	riscv_clear_ipi();
-
 	/* All kernel threads share the same mm context.  */
 	mmgrab(mm);
 	current->active_mm = mm;
 
+	riscv_ipi_enable();
+
 	notify_cpu_starting(curr_cpuid);
 	numa_add_cpu(curr_cpuid);
 	update_siblings_masks(curr_cpuid);
diff --git a/drivers/clocksource/timer-clint.c b/drivers/clocksource/timer-clint.c
index 6cfe2ab73eb0..3b68ed53fe4a 100644
--- a/drivers/clocksource/timer-clint.c
+++ b/drivers/clocksource/timer-clint.c
@@ -30,7 +30,6 @@
 #define CLINT_TIMER_VAL_OFF	0xbff8
 
 /* CLINT manages IPI and Timer for RISC-V M-mode  */
-static u32 __iomem *clint_ipi_base;
 static u64 __iomem *clint_timer_cmp;
 static u64 __iomem *clint_timer_val;
 static unsigned long clint_timer_freq;
@@ -41,24 +40,6 @@ u64 __iomem *clint_time_val;
 EXPORT_SYMBOL(clint_time_val);
 #endif
 
-static void clint_send_ipi(const struct cpumask *target)
-{
-	unsigned int cpu;
-
-	for_each_cpu(cpu, target)
-		writel(1, clint_ipi_base + cpuid_to_hartid_map(cpu));
-}
-
-static void clint_clear_ipi(void)
-{
-	writel(0, clint_ipi_base + cpuid_to_hartid_map(smp_processor_id()));
-}
-
-static struct riscv_ipi_ops clint_ipi_ops = {
-	.ipi_inject = clint_send_ipi,
-	.ipi_clear = clint_clear_ipi,
-};
-
 #ifdef CONFIG_64BIT
 #define clint_get_cycles()	readq_relaxed(clint_timer_val)
 #else
@@ -189,7 +170,6 @@ static int __init clint_timer_init_dt(struct device_node *np)
 		return -ENODEV;
 	}
 
-	clint_ipi_base = base + CLINT_IPI_OFF;
 	clint_timer_cmp = base + CLINT_TIMER_CMP_OFF;
 	clint_timer_val = base + CLINT_TIMER_VAL_OFF;
 	clint_timer_freq = riscv_timebase;
@@ -228,9 +208,6 @@ static int __init clint_timer_init_dt(struct device_node *np)
 		goto fail_free_irq;
 	}
 
-	riscv_set_ipi_ops(&clint_ipi_ops);
-	clint_clear_ipi();
-
 	return 0;
 
 fail_free_irq:
diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
index 8017f6d32d52..65d9c5b0ddb8 100644
--- a/drivers/irqchip/irq-riscv-intc.c
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -26,20 +26,7 @@ static asmlinkage void riscv_intc_irq(struct pt_regs *regs)
 	if (unlikely(cause >= BITS_PER_LONG))
 		panic("unexpected interrupt cause");
 
-	switch (cause) {
-#ifdef CONFIG_SMP
-	case RV_IRQ_SOFT:
-		/*
-		 * We only use software interrupts to pass IPIs, so if a
-		 * non-SMP system gets one, then we don't know what to do.
-		 */
-		handle_IPI(regs);
-		break;
-#endif
-	default:
-		handle_domain_irq(intc_domain, cause, regs);
-		break;
-	}
+	handle_domain_irq(intc_domain, cause, regs);
 }
 
 /*
@@ -59,18 +46,6 @@ static void riscv_intc_irq_unmask(struct irq_data *d)
 	csr_set(CSR_IE, BIT(d->hwirq));
 }
 
-static int riscv_intc_cpu_starting(unsigned int cpu)
-{
-	csr_set(CSR_IE, BIT(RV_IRQ_SOFT));
-	return 0;
-}
-
-static int riscv_intc_cpu_dying(unsigned int cpu)
-{
-	csr_clear(CSR_IE, BIT(RV_IRQ_SOFT));
-	return 0;
-}
-
 static struct irq_chip riscv_intc_chip = {
 	.name = "RISC-V INTC",
 	.irq_mask = riscv_intc_irq_mask,
@@ -87,9 +62,32 @@ static int riscv_intc_domain_map(struct irq_domain *d, unsigned int irq,
 	return 0;
 }
 
+static int riscv_intc_domain_alloc(struct irq_domain *domain,
+				   unsigned int virq, unsigned int nr_irqs,
+				   void *arg)
+{
+	int i, ret;
+	irq_hw_number_t hwirq;
+	unsigned int type = IRQ_TYPE_NONE;
+	struct irq_fwspec *fwspec = arg;
+
+	ret = irq_domain_translate_onecell(domain, fwspec, &hwirq, &type);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < nr_irqs; i++) {
+		ret = riscv_intc_domain_map(domain, virq + i, hwirq + i);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
 static const struct irq_domain_ops riscv_intc_domain_ops = {
 	.map	= riscv_intc_domain_map,
 	.xlate	= irq_domain_xlate_onecell,
+	.alloc	= riscv_intc_domain_alloc
 };
 
 static int __init riscv_intc_init(struct device_node *node,
@@ -125,11 +123,6 @@ static int __init riscv_intc_init(struct device_node *node,
 		return rc;
 	}
 
-	cpuhp_setup_state(CPUHP_AP_IRQ_RISCV_STARTING,
-			  "irqchip/riscv/intc:starting",
-			  riscv_intc_cpu_starting,
-			  riscv_intc_cpu_dying);
-
 	pr_info("%d local interrupts mapped\n", BITS_PER_LONG);
 
 	return 0;
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [RFC PATCH v3 03/11] RISC-V: Allow marking IPIs as suitable for remote FENCEs
  2021-08-30  4:17 [RFC PATCH v3 00/11] Linux RISC-V ACLINT Support Anup Patel
  2021-08-30  4:17 ` [RFC PATCH v3 01/11] RISC-V: Clear SIP bit only when using SBI IPI operations Anup Patel
  2021-08-30  4:17 ` [RFC PATCH v3 02/11] RISC-V: Treat IPIs as normal Linux IRQs Anup Patel
@ 2021-08-30  4:17 ` Anup Patel
  2021-08-30  4:17 ` [RFC PATCH v3 04/11] RISC-V: Use IPIs for remote TLB flush when possible Anup Patel
                   ` (7 subsequent siblings)
  10 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2021-08-30  4:17 UTC (permalink / raw)
  To: Palmer Dabbelt, Palmer Dabbelt, Paul Walmsley, Thomas Gleixner,
	Marc Zyngier, Daniel Lezcano, Rob Herring
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, devicetree, Anup Patel

To do remote FENCEs (i.e. remote TLB flushes) using IPI calls on
the RISC-V kernel, we need hardware mechanism to directly inject
IPI from the RISC-V kernel instead of using SBI calls.

The upcoming ACLINT [M|S]SWI devices and AIA IMSIC devices allow
direct IPI injection from the RISC-V kernel. To support this, we
extend the riscv_ipi_set_virq_range() function so that irqchip
drivers can mark IPIs as suitable for remote FENCEs.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
---
 arch/riscv/include/asm/smp.h | 18 ++++++++++++++++--
 arch/riscv/kernel/sbi-ipi.c  |  2 +-
 arch/riscv/kernel/smp.c      |  9 ++++++++-
 3 files changed, 25 insertions(+), 4 deletions(-)

diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h
index 6bdaab122ffa..f4856c911335 100644
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -16,6 +16,9 @@ struct seq_file;
 extern unsigned long boot_cpu_hartid;
 
 #ifdef CONFIG_SMP
+
+#include <linux/jump_label.h>
+
 /*
  * Mapping between linux logical cpu index and hartid.
  */
@@ -47,7 +50,12 @@ void riscv_ipi_disable(void);
 void riscv_ipi_setup(void);
 
 /* Set the IPI interrupt numbers for arch (called by irqchip drivers) */
-void riscv_ipi_set_virq_range(int virq, int nr_irqs);
+void riscv_ipi_set_virq_range(int virq, int nr_irqs, bool use_for_rfence);
+
+/* Check if we can use IPIs for remote FENCEs */
+DECLARE_STATIC_KEY_FALSE(riscv_ipi_for_rfence);
+#define riscv_use_ipi_for_rfence() \
+	static_branch_unlikely(&riscv_ipi_for_rfence)
 
 /* Secondary hart entry */
 asmlinkage void smp_callin(void);
@@ -102,10 +110,16 @@ static inline void riscv_ipi_setup(void)
 {
 }
 
-static inline void riscv_ipi_set_virq_range(int virq, int nr)
+static inline void riscv_ipi_set_virq_range(int virq, int nr,
+					    bool use_for_rfence)
 {
 }
 
+static inline bool riscv_use_ipi_for_rfence(void)
+{
+	return false;
+}
+
 #endif /* CONFIG_SMP */
 
 #if defined(CONFIG_HOTPLUG_CPU) && (CONFIG_SMP)
diff --git a/arch/riscv/kernel/sbi-ipi.c b/arch/riscv/kernel/sbi-ipi.c
index dc284ad3551c..c65daf50ff1f 100644
--- a/arch/riscv/kernel/sbi-ipi.c
+++ b/arch/riscv/kernel/sbi-ipi.c
@@ -149,7 +149,7 @@ static int __init sbi_ipi_set_virq(void)
 		return -ENOMEM;
 	}
 
-	riscv_ipi_set_virq_range(virq, BITS_PER_LONG);
+	riscv_ipi_set_virq_range(virq, BITS_PER_LONG, false);
 
 	return 0;
 }
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index 6c9873b7d60e..a8ce7a0556ab 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -183,7 +183,10 @@ void riscv_ipi_setup(void)
 	riscv_ipi_enable();
 }
 
-void riscv_ipi_set_virq_range(int virq, int nr)
+DEFINE_STATIC_KEY_FALSE(riscv_ipi_for_rfence);
+EXPORT_SYMBOL_GPL(riscv_ipi_for_rfence);
+
+void riscv_ipi_set_virq_range(int virq, int nr, bool use_for_rfence)
 {
 	if (WARN_ON(ipi_virq_base))
 		return;
@@ -191,6 +194,10 @@ void riscv_ipi_set_virq_range(int virq, int nr)
 	WARN_ON(nr < IPI_MAX);
 	nr_ipi = min(nr, IPI_MAX);
 	ipi_virq_base = virq;
+	if (use_for_rfence)
+		static_branch_enable(&riscv_ipi_for_rfence);
+	else
+		static_branch_disable(&riscv_ipi_for_rfence);
 }
 EXPORT_SYMBOL_GPL(riscv_ipi_set_virq_range);
 
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [RFC PATCH v3 04/11] RISC-V: Use IPIs for remote TLB flush when possible
  2021-08-30  4:17 [RFC PATCH v3 00/11] Linux RISC-V ACLINT Support Anup Patel
                   ` (2 preceding siblings ...)
  2021-08-30  4:17 ` [RFC PATCH v3 03/11] RISC-V: Allow marking IPIs as suitable for remote FENCEs Anup Patel
@ 2021-08-30  4:17 ` Anup Patel
  2021-08-30  4:17 ` [RFC PATCH v3 05/11] dt-bindings: interrupt-controller: Add ACLINT MSWI and SSWI bindings Anup Patel
                   ` (6 subsequent siblings)
  10 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2021-08-30  4:17 UTC (permalink / raw)
  To: Palmer Dabbelt, Palmer Dabbelt, Paul Walmsley, Thomas Gleixner,
	Marc Zyngier, Daniel Lezcano, Rob Herring
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, devicetree, Anup Patel

If IPI calls are injected using SBI IPI calls then remote TLB flush
using SBI RFENCE calls is much faster because using IPIs for remote
TLB flush would still endup as SBI IPI calls with extra processing
on kernel side.

It is now possible to have specialized hardware (such as RISC-V AIA
and RISC-V ACLINT) which allows S-mode software to directly inject
IPIs without any assistance from M-mode runtime firmware.

This patch extends remote TLB flush functions to use IPIs whenever
underlying IPI operations are suitable for remote FENCEs.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
---
 arch/riscv/mm/tlbflush.c | 91 +++++++++++++++++++++++++++++++---------
 1 file changed, 72 insertions(+), 19 deletions(-)

diff --git a/arch/riscv/mm/tlbflush.c b/arch/riscv/mm/tlbflush.c
index 64f8201237c2..f96f02ed29ef 100644
--- a/arch/riscv/mm/tlbflush.c
+++ b/arch/riscv/mm/tlbflush.c
@@ -23,13 +23,60 @@ static inline void local_flush_tlb_page_asid(unsigned long addr,
 			: "memory");
 }
 
+static inline void local_flush_tlb_range(unsigned long start,
+		unsigned long size, unsigned long stride)
+{
+	if (size <= stride)
+		local_flush_tlb_page(start);
+	else
+		local_flush_tlb_all();
+}
+
+static inline void local_flush_tlb_range_asid(unsigned long start,
+		unsigned long size, unsigned long stride, unsigned long asid)
+{
+	if (size <= stride)
+		local_flush_tlb_page_asid(start, asid);
+	else
+		local_flush_tlb_all_asid(asid);
+}
+
+static void __ipi_flush_tlb_all(void *info)
+{
+	local_flush_tlb_all();
+}
+
 void flush_tlb_all(void)
 {
-	sbi_remote_sfence_vma(NULL, 0, -1);
+	if (riscv_use_ipi_for_rfence())
+		on_each_cpu(__ipi_flush_tlb_all, NULL, 1);
+	else
+		sbi_remote_sfence_vma(NULL, 0, -1);
+}
+
+struct flush_tlb_range_data {
+	unsigned long asid;
+	unsigned long start;
+	unsigned long size;
+	unsigned long stride;
+};
+
+static void __ipi_flush_tlb_range_asid(void *info)
+{
+	struct flush_tlb_range_data *d = info;
+
+	local_flush_tlb_range_asid(d->start, d->size, d->stride, d->asid);
+}
+
+static void __ipi_flush_tlb_range(void *info)
+{
+	struct flush_tlb_range_data *d = info;
+
+	local_flush_tlb_range(d->start, d->size, d->stride);
 }
 
-static void __sbi_tlb_flush_range(struct mm_struct *mm, unsigned long start,
-				  unsigned long size, unsigned long stride)
+static void __flush_tlb_range(struct mm_struct *mm, unsigned long start,
+			      unsigned long size, unsigned long stride)
 {
 	struct cpumask *cmask = mm_cpumask(mm);
 	struct cpumask hmask;
@@ -46,23 +93,29 @@ static void __sbi_tlb_flush_range(struct mm_struct *mm, unsigned long start,
 		unsigned long asid = atomic_long_read(&mm->context.id);
 
 		if (broadcast) {
-			riscv_cpuid_to_hartid_mask(cmask, &hmask);
-			sbi_remote_sfence_vma_asid(cpumask_bits(&hmask),
-						   start, size, asid);
-		} else if (size <= stride) {
-			local_flush_tlb_page_asid(start, asid);
+			if (riscv_use_ipi_for_rfence()) {
+				on_each_cpu(__ipi_flush_tlb_range_asid,
+					    cmask, 1);
+			} else {
+				riscv_cpuid_to_hartid_mask(cmask, &hmask);
+				sbi_remote_sfence_vma_asid(
+							cpumask_bits(&hmask),
+							start, size, asid);
+			}
 		} else {
-			local_flush_tlb_all_asid(asid);
+			local_flush_tlb_range_asid(start, size, stride, asid);
 		}
 	} else {
 		if (broadcast) {
-			riscv_cpuid_to_hartid_mask(cmask, &hmask);
-			sbi_remote_sfence_vma(cpumask_bits(&hmask),
-					      start, size);
-		} else if (size <= stride) {
-			local_flush_tlb_page(start);
+			if (riscv_use_ipi_for_rfence()) {
+				on_each_cpu(__ipi_flush_tlb_range, cmask, 1);
+			} else {
+				riscv_cpuid_to_hartid_mask(cmask, &hmask);
+				sbi_remote_sfence_vma(cpumask_bits(&hmask),
+						      start, size);
+			}
 		} else {
-			local_flush_tlb_all();
+			local_flush_tlb_range(start, size, stride);
 		}
 	}
 
@@ -71,23 +124,23 @@ static void __sbi_tlb_flush_range(struct mm_struct *mm, unsigned long start,
 
 void flush_tlb_mm(struct mm_struct *mm)
 {
-	__sbi_tlb_flush_range(mm, 0, -1, PAGE_SIZE);
+	__flush_tlb_range(mm, 0, -1, PAGE_SIZE);
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
 {
-	__sbi_tlb_flush_range(vma->vm_mm, addr, PAGE_SIZE, PAGE_SIZE);
+	__flush_tlb_range(vma->vm_mm, addr, PAGE_SIZE, PAGE_SIZE);
 }
 
 void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 		     unsigned long end)
 {
-	__sbi_tlb_flush_range(vma->vm_mm, start, end - start, PAGE_SIZE);
+	__flush_tlb_range(vma->vm_mm, start, end - start, PAGE_SIZE);
 }
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
 			unsigned long end)
 {
-	__sbi_tlb_flush_range(vma->vm_mm, start, end - start, PMD_SIZE);
+	__flush_tlb_range(vma->vm_mm, start, end - start, PMD_SIZE);
 }
 #endif
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [RFC PATCH v3 05/11] dt-bindings: interrupt-controller: Add ACLINT MSWI and SSWI bindings
  2021-08-30  4:17 [RFC PATCH v3 00/11] Linux RISC-V ACLINT Support Anup Patel
                   ` (3 preceding siblings ...)
  2021-08-30  4:17 ` [RFC PATCH v3 04/11] RISC-V: Use IPIs for remote TLB flush when possible Anup Patel
@ 2021-08-30  4:17 ` Anup Patel
  2021-09-01  1:24   ` Rob Herring
  2021-08-30  4:17 ` [RFC PATCH v3 06/11] dt-bindings: timer: Update SiFive CLINT bindings for IPI support Anup Patel
                   ` (5 subsequent siblings)
  10 siblings, 1 reply; 22+ messages in thread
From: Anup Patel @ 2021-08-30  4:17 UTC (permalink / raw)
  To: Palmer Dabbelt, Palmer Dabbelt, Paul Walmsley, Thomas Gleixner,
	Marc Zyngier, Daniel Lezcano, Rob Herring
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, devicetree, Anup Patel, Bin Meng

We add DT bindings documentation for the ACLINT MSWI and SSWI
devices found on RISC-V SOCs.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
---
 .../riscv,aclint-swi.yaml                     | 95 +++++++++++++++++++
 1 file changed, 95 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml

diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml b/Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml
new file mode 100644
index 000000000000..68563259ae24
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/riscv,aclint-swi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V ACLINT Software Interrupt Devices
+
+maintainers:
+  - Anup Patel <anup.patel@wdc.com>
+
+description:
+  RISC-V SOCs include an implementation of the M-level software interrupt
+  (MSWI) device and the S-level software interrupt (SSWI) device defined
+  in the RISC-V Advanced Core Local Interruptor (ACLINT) specification.
+
+  The ACLINT MSWI and SSWI devices are documented in the RISC-V ACLINT
+  specification located at
+  https://github.com/riscv/riscv-aclint/blob/main/riscv-aclint.adoc.
+
+  The ACLINT MSWI and SSWI devices directly connect to the M-level and
+  S-level software interrupt lines of various HARTs (or CPUs) respectively
+  so the RISC-V per-HART (or per-CPU) local interrupt controller is the
+  parent interrupt controller for the ACLINT MSWI and SSWI devices.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+        - enum:
+          - riscv,aclint-mswi
+
+      - items:
+        - enum:
+          - riscv,aclint-sswi
+
+    description:
+      For ACLINT MSWI devices, it should be "riscv,aclint-mswi" OR
+      "<vendor>,<chip>-aclint-mswi".
+      For ACLINT SSWI devices, it should be "riscv,aclint-sswi" OR
+      "<vendor>,<chip>-aclint-sswi".
+
+  reg:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 0
+
+  interrupts-extended:
+    minItems: 1
+    maxItems: 4095
+
+  interrupt-controller: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts-extended
+  - interrupt-controller
+  - "#interrupt-cells"
+
+examples:
+  - |
+    // Example 1 (RISC-V MSWI device used by Linux RISC-V NoMMU kernel):
+
+    interrupt-controller@2000000 {
+      compatible = "riscv,aclint-mswi";
+      interrupts-extended = <&cpu1intc 3>,
+                            <&cpu2intc 3>,
+                            <&cpu3intc 3>,
+                            <&cpu4intc 3>;
+      reg = <0x2000000 0x4000>;
+      interrupt-controller;
+      #interrupt-cells = <0>;
+    };
+
+  - |
+    // Example 2 (RISC-V SSWI device used by Linux RISC-V MMU kernel):
+
+    interrupt-controller@2100000 {
+      compatible = "riscv,aclint-sswi";
+      interrupts-extended = <&cpu1intc 1>,
+                            <&cpu2intc 1>,
+                            <&cpu3intc 1>,
+                            <&cpu4intc 1>;
+      reg = <0x2100000 0x4000>;
+      interrupt-controller;
+      #interrupt-cells = <0>;
+    };
+...
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [RFC PATCH v3 06/11] dt-bindings: timer: Update SiFive CLINT bindings for IPI support
  2021-08-30  4:17 [RFC PATCH v3 00/11] Linux RISC-V ACLINT Support Anup Patel
                   ` (4 preceding siblings ...)
  2021-08-30  4:17 ` [RFC PATCH v3 05/11] dt-bindings: interrupt-controller: Add ACLINT MSWI and SSWI bindings Anup Patel
@ 2021-08-30  4:17 ` Anup Patel
  2021-09-01  1:29   ` Rob Herring
  2021-08-30  4:17 ` [RFC PATCH v3 07/11] irqchip: Add ACLINT software interrupt driver Anup Patel
                   ` (4 subsequent siblings)
  10 siblings, 1 reply; 22+ messages in thread
From: Anup Patel @ 2021-08-30  4:17 UTC (permalink / raw)
  To: Palmer Dabbelt, Palmer Dabbelt, Paul Walmsley, Thomas Gleixner,
	Marc Zyngier, Daniel Lezcano, Rob Herring
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, devicetree, Anup Patel

The Linux RISC-V now treats IPIs as regular per-CPU IRQs. This means
we have to create a IPI interrupt domain to use CLINT IPI functionality
hence requiring a "interrupt-controller" and "#interrupt-cells" DT
property in CLINT DT nodes.

Impact of this CLINT DT bindings change only affects Linux RISC-V
NoMMU kernel and has no effect of existing M-mode runtime firmwares
(i.e. OpenSBI).

Signed-off-by: Anup Patel <anup.patel@wdc.com>
---
 .../bindings/timer/sifive,clint.yaml          | 20 ++++++++++++++-----
 arch/riscv/boot/dts/canaan/k210.dtsi          |  2 ++
 .../boot/dts/microchip/microchip-mpfs.dtsi    |  2 ++
 3 files changed, 19 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
index a35952f48742..9c8ef9f4094f 100644
--- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml
+++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
@@ -43,6 +43,12 @@ properties:
 
   interrupts-extended:
     minItems: 1
+    maxItems: 4095
+
+  "#interrupt-cells":
+    const: 0
+
+  interrupt-controller: true
 
 additionalProperties: false
 
@@ -50,15 +56,19 @@ required:
   - compatible
   - reg
   - interrupts-extended
+  - interrupt-controller
+  - "#interrupt-cells"
 
 examples:
   - |
     timer@2000000 {
       compatible = "sifive,fu540-c000-clint", "sifive,clint0";
-      interrupts-extended = <&cpu1intc 3 &cpu1intc 7
-                             &cpu2intc 3 &cpu2intc 7
-                             &cpu3intc 3 &cpu3intc 7
-                             &cpu4intc 3 &cpu4intc 7>;
-       reg = <0x2000000 0x10000>;
+      interrupts-extended = <&cpu1intc 3>, <&cpu1intc 7>,
+                            <&cpu2intc 3>, <&cpu2intc 7>,
+                            <&cpu3intc 3>, <&cpu3intc 7>,
+                            <&cpu4intc 3>, <&cpu4intc 7>;
+      reg = <0x2000000 0x10000>;
+      interrupt-controller;
+      #interrupt-cells = <0>;
     };
 ...
diff --git a/arch/riscv/boot/dts/canaan/k210.dtsi b/arch/riscv/boot/dts/canaan/k210.dtsi
index 5e8ca8142482..67dcda1efadb 100644
--- a/arch/riscv/boot/dts/canaan/k210.dtsi
+++ b/arch/riscv/boot/dts/canaan/k210.dtsi
@@ -105,6 +105,8 @@ clint0: timer@2000000 {
 			reg = <0x2000000 0xC000>;
 			interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
 					      &cpu1_intc 3 &cpu1_intc 7>;
+			#interrupt-cells = <0>;
+			interrupt-controller;
 		};
 
 		plic0: interrupt-controller@c000000 {
diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
index b9819570a7d1..67fb41439f20 100644
--- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
@@ -168,6 +168,8 @@ &cpu1_intc 3 &cpu1_intc 7
 						&cpu2_intc 3 &cpu2_intc 7
 						&cpu3_intc 3 &cpu3_intc 7
 						&cpu4_intc 3 &cpu4_intc 7>;
+			#interrupt-cells = <0>;
+			interrupt-controller;
 		};
 
 		plic: interrupt-controller@c000000 {
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [RFC PATCH v3 07/11] irqchip: Add ACLINT software interrupt driver
  2021-08-30  4:17 [RFC PATCH v3 00/11] Linux RISC-V ACLINT Support Anup Patel
                   ` (5 preceding siblings ...)
  2021-08-30  4:17 ` [RFC PATCH v3 06/11] dt-bindings: timer: Update SiFive CLINT bindings for IPI support Anup Patel
@ 2021-08-30  4:17 ` Anup Patel
  2021-08-30  4:17 ` [RFC PATCH v3 08/11] RISC-V: Select ACLINT SWI driver for virt machine Anup Patel
                   ` (3 subsequent siblings)
  10 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2021-08-30  4:17 UTC (permalink / raw)
  To: Palmer Dabbelt, Palmer Dabbelt, Paul Walmsley, Thomas Gleixner,
	Marc Zyngier, Daniel Lezcano, Rob Herring
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, devicetree, Anup Patel

The RISC-V ACLINT defines MSWI and SSWI devices for M-mode and
S-mode software interrupts respectively. We add irqchip driver
which provide IPI operations based on ACLINT [M|S]SWI devices
to the Linux RISC-V kernel.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
---
 drivers/irqchip/Kconfig                |   9 +
 drivers/irqchip/Makefile               |   1 +
 drivers/irqchip/irq-riscv-aclint-swi.c | 265 +++++++++++++++++++++++++
 3 files changed, 275 insertions(+)
 create mode 100644 drivers/irqchip/irq-riscv-aclint-swi.c

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 4d5924e9f766..4e7458c551c7 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -508,6 +508,15 @@ config RISCV_INTC
 
 	   If you don't know what to do here, say Y.
 
+config RISCV_ACLINT_SWI
+	bool "RISC-V Advanced Core Local Interruptor Software Interrupts"
+	depends on RISCV
+	help
+	   This enables support for software interrupts using the Advanced
+	   Core Local Interruptor (ACLINT) found in RISC-V systems.  The
+	   RISC-V ACLINT provides devices for inter-process interrupt and
+	   timer functionality.
+
 config SIFIVE_PLIC
 	bool "SiFive Platform-Level Interrupt Controller"
 	depends on RISCV
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index f88cbf36a9d2..81306d560972 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -97,6 +97,7 @@ obj-$(CONFIG_QCOM_PDC)			+= qcom-pdc.o
 obj-$(CONFIG_CSKY_MPINTC)		+= irq-csky-mpintc.o
 obj-$(CONFIG_CSKY_APB_INTC)		+= irq-csky-apb-intc.o
 obj-$(CONFIG_RISCV_INTC)		+= irq-riscv-intc.o
+obj-$(CONFIG_RISCV_ACLINT_SWI)		+= irq-riscv-aclint-swi.o
 obj-$(CONFIG_SIFIVE_PLIC)		+= irq-sifive-plic.o
 obj-$(CONFIG_IMX_IRQSTEER)		+= irq-imx-irqsteer.o
 obj-$(CONFIG_IMX_INTMUX)		+= irq-imx-intmux.o
diff --git a/drivers/irqchip/irq-riscv-aclint-swi.c b/drivers/irqchip/irq-riscv-aclint-swi.c
new file mode 100644
index 000000000000..c61987d2f823
--- /dev/null
+++ b/drivers/irqchip/irq-riscv-aclint-swi.c
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ */
+
+#define pr_fmt(fmt) "aclint-swi: " fmt
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/smp.h>
+
+struct aclint_swi {
+	void __iomem *sip_reg;
+	unsigned long bits;
+};
+
+static int aclint_swi_parent_irq __ro_after_init;
+static struct irq_domain *aclint_swi_domain __ro_after_init;
+static DEFINE_PER_CPU(struct aclint_swi, aclint_swis);
+
+static void aclint_swi_dummy(struct irq_data *d)
+{
+}
+
+static void aclint_swi_send_mask(struct irq_data *d,
+				  const struct cpumask *mask)
+{
+	int cpu;
+	struct aclint_swi *swi;
+
+	/* Barrier before doing atomic bit update to IPI bits */
+	smp_mb__before_atomic();
+
+	for_each_cpu(cpu, mask) {
+		swi = per_cpu_ptr(&aclint_swis, cpu);
+		set_bit(d->hwirq, &swi->bits);
+		writel(1, swi->sip_reg);
+	}
+
+	/* Barrier after doing atomic bit update to IPI bits */
+	smp_mb__after_atomic();
+}
+
+static struct irq_chip aclint_swi_chip = {
+	.name = "RISC-V ACLINT SWI",
+	.irq_mask	= aclint_swi_dummy,
+	.irq_unmask	= aclint_swi_dummy,
+	.ipi_send_mask	= aclint_swi_send_mask,
+};
+
+static int aclint_swi_domain_map(struct irq_domain *d, unsigned int irq,
+				 irq_hw_number_t hwirq)
+{
+	irq_set_percpu_devid(irq);
+	irq_domain_set_info(d, irq, hwirq, &aclint_swi_chip, d->host_data,
+			    handle_percpu_devid_irq, NULL, NULL);
+
+	return 0;
+}
+
+static int aclint_swi_domain_alloc(struct irq_domain *d, unsigned int virq,
+				   unsigned int nr_irqs, void *arg)
+{
+	int i, ret;
+	irq_hw_number_t hwirq;
+	unsigned int type = IRQ_TYPE_NONE;
+	struct irq_fwspec *fwspec = arg;
+
+	ret = irq_domain_translate_onecell(d, fwspec, &hwirq, &type);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < nr_irqs; i++) {
+		ret = aclint_swi_domain_map(d, virq + i, hwirq + i);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct irq_domain_ops aclint_swi_domain_ops = {
+	.translate	= irq_domain_translate_onecell,
+	.alloc		= aclint_swi_domain_alloc,
+	.free		= irq_domain_free_irqs_top,
+};
+
+static void aclint_swi_handle_irq(struct irq_desc *desc)
+{
+	int err;
+	unsigned long irqs;
+	irq_hw_number_t hwirq;
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct aclint_swi *swi = this_cpu_ptr(&aclint_swis);
+
+	chained_irq_enter(chip, desc);
+
+	while (true) {
+#ifdef CONFIG_RISCV_M_MODE
+		writel(0, swi->sip_reg);
+#else
+		csr_clear(CSR_IP, IE_SIE);
+#endif
+
+		/* Order bit clearing and data access. */
+		mb();
+
+		irqs = xchg(&swi->bits, 0);
+		if (!irqs)
+			goto done;
+
+		for_each_set_bit(hwirq, &irqs, BITS_PER_LONG) {
+			err = generic_handle_domain_irq(aclint_swi_domain,
+							hwirq);
+			if (unlikely(err))
+				pr_warn_ratelimited(
+					"can't find mapping for hwirq %lu\n",
+					hwirq);
+		}
+	}
+
+done:
+	chained_irq_exit(chip, desc);
+}
+
+static int aclint_swi_dying_cpu(unsigned int cpu)
+{
+	disable_percpu_irq(aclint_swi_parent_irq);
+	return 0;
+}
+
+static int aclint_swi_starting_cpu(unsigned int cpu)
+{
+	enable_percpu_irq(aclint_swi_parent_irq,
+			  irq_get_trigger_type(aclint_swi_parent_irq));
+	return 0;
+}
+
+static int __init aclint_swi_domain_init(struct device_node *node)
+{
+	int virq;
+	struct irq_fwspec ipi;
+
+	/*
+	 * We can have multiple ACLINT SWI devices but we only need
+	 * one IRQ domain for providing per-HART (or per-CPU) IPIs.
+	 */
+	if (aclint_swi_domain)
+		return 0;
+
+	aclint_swi_domain = irq_domain_add_linear(node, BITS_PER_LONG,
+						&aclint_swi_domain_ops, NULL);
+	if (!aclint_swi_domain) {
+		pr_err("unable to add ACLINT SWI IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	ipi.fwnode		= aclint_swi_domain->fwnode;
+	ipi.param_count	= 1;
+	ipi.param[0]		= 0;
+	virq = __irq_domain_alloc_irqs(aclint_swi_domain, -1, BITS_PER_LONG,
+				       NUMA_NO_NODE, &ipi,
+				       false, NULL);
+	if (virq <= 0) {
+		pr_err("unable to alloc IRQs from ACLINT SWI IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	riscv_ipi_set_virq_range(virq, BITS_PER_LONG, true);
+
+	return 0;
+}
+
+static int __init aclint_swi_init(struct device_node *node,
+				  struct device_node *parent)
+{
+	int rc;
+	void __iomem *base;
+	struct aclint_swi *swi;
+	u32 i, nr_irqs, nr_cpus = 0;
+
+	/* Map the registers */
+	base = of_iomap(node, 0);
+	if (!base) {
+		pr_err("%pOFP: could not map registers\n", node);
+		return -ENODEV;
+	}
+
+	/* Iterarte over each target CPU connected with this ACLINT */
+	nr_irqs = of_irq_count(node);
+	for (i = 0; i < nr_irqs; i++) {
+		struct of_phandle_args parent;
+		int cpu, hartid;
+
+		if (of_irq_parse_one(node, i, &parent)) {
+			pr_err("%pOFP: failed to parse irq %d.\n",
+			       node, i);
+			continue;
+		}
+
+		if (parent.args[0] != RV_IRQ_SOFT) {
+			pr_err("%pOFP: invalid irq %d (hwirq %d)\n",
+			       node, i, parent.args[0]);
+			continue;
+		}
+
+		hartid = riscv_of_parent_hartid(parent.np);
+		if (hartid < 0) {
+			pr_warn("failed to parse hart ID for irq %d.\n", i);
+			continue;
+		}
+
+		cpu = riscv_hartid_to_cpuid(hartid);
+		if (cpu < 0) {
+			pr_warn("Invalid cpuid for irq %d\n", i);
+			continue;
+		}
+
+		/* Find parent domain and register chained handler */
+		if (!aclint_swi_parent_irq && irq_find_host(parent.np)) {
+			aclint_swi_parent_irq = irq_of_parse_and_map(node, i);
+			if (aclint_swi_parent_irq) {
+				irq_set_chained_handler(aclint_swi_parent_irq,
+							aclint_swi_handle_irq);
+				cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
+					"irqchip/riscv/aclint-swi:starting",
+					aclint_swi_starting_cpu,
+					aclint_swi_dying_cpu);
+			}
+		}
+
+		swi = per_cpu_ptr(&aclint_swis, cpu);
+		swi->sip_reg = base + i * sizeof(u32);
+		writel(0, swi->sip_reg);
+
+		nr_cpus++;
+	}
+
+	/* Create the IPI domain for ACLINT SWI device */
+	rc = aclint_swi_domain_init(node);
+	if (rc)
+		return rc;
+
+	/* Announce the ACLINT SWI device */
+	pr_info("%pOFP: providing IPIs for %d CPUs\n", node, nr_cpus);
+
+	return 0;
+}
+
+#ifdef CONFIG_RISCV_M_MODE
+IRQCHIP_DECLARE(riscv_aclint_swi, "riscv,clint0", aclint_swi_init);
+IRQCHIP_DECLARE(riscv_aclint_swi1, "sifive,clint0", aclint_swi_init);
+IRQCHIP_DECLARE(riscv_aclint_swi2, "riscv,aclint-mswi", aclint_swi_init);
+#else
+IRQCHIP_DECLARE(riscv_aclint_swi, "riscv,aclint-sswi", aclint_swi_init);
+#endif
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [RFC PATCH v3 08/11] RISC-V: Select ACLINT SWI driver for virt machine
  2021-08-30  4:17 [RFC PATCH v3 00/11] Linux RISC-V ACLINT Support Anup Patel
                   ` (6 preceding siblings ...)
  2021-08-30  4:17 ` [RFC PATCH v3 07/11] irqchip: Add ACLINT software interrupt driver Anup Patel
@ 2021-08-30  4:17 ` Anup Patel
  2021-08-30  4:17 ` [RFC PATCH v3 09/11] dt-bindings: timer: Add ACLINT MTIMER bindings Anup Patel
                   ` (2 subsequent siblings)
  10 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2021-08-30  4:17 UTC (permalink / raw)
  To: Palmer Dabbelt, Palmer Dabbelt, Paul Walmsley, Thomas Gleixner,
	Marc Zyngier, Daniel Lezcano, Rob Herring
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, devicetree, Anup Patel, Bin Meng

The QEMU virt machine has provision to emulate ACLINT SWI device
for supervisor-mode so let's select corresponding driver from
SOC_VIRT kconfig option.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
---
 arch/riscv/Kconfig.socs | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
index 30676ebb16eb..651da2ed93bc 100644
--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -28,6 +28,7 @@ config SOC_VIRT
 	select GOLDFISH
 	select RTC_DRV_GOLDFISH if RTC_CLASS
 	select SIFIVE_PLIC
+	select RISCV_ACLINT_SWI
 	help
 	  This enables support for QEMU Virt Machine.
 
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [RFC PATCH v3 09/11] dt-bindings: timer: Add ACLINT MTIMER bindings
  2021-08-30  4:17 [RFC PATCH v3 00/11] Linux RISC-V ACLINT Support Anup Patel
                   ` (7 preceding siblings ...)
  2021-08-30  4:17 ` [RFC PATCH v3 08/11] RISC-V: Select ACLINT SWI driver for virt machine Anup Patel
@ 2021-08-30  4:17 ` Anup Patel
  2021-09-01  1:31   ` Rob Herring
  2021-08-30  4:17 ` [RFC PATCH v3 10/11] clocksource: clint: Add support for ACLINT MTIMER device Anup Patel
  2021-08-30  4:17 ` [RFC PATCH v3 11/11] MAINTAINERS: Add entry for RISC-V ACLINT drivers Anup Patel
  10 siblings, 1 reply; 22+ messages in thread
From: Anup Patel @ 2021-08-30  4:17 UTC (permalink / raw)
  To: Palmer Dabbelt, Palmer Dabbelt, Paul Walmsley, Thomas Gleixner,
	Marc Zyngier, Daniel Lezcano, Rob Herring
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, devicetree, Anup Patel, Bin Meng

We add DT bindings documentation for the ACLINT MTIMER device
found on RISC-V SOCs.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
---
 .../bindings/timer/riscv,aclint-mtimer.yaml   | 70 +++++++++++++++++++
 1 file changed, 70 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/riscv,aclint-mtimer.yaml

diff --git a/Documentation/devicetree/bindings/timer/riscv,aclint-mtimer.yaml b/Documentation/devicetree/bindings/timer/riscv,aclint-mtimer.yaml
new file mode 100644
index 000000000000..b0b2ee6c761c
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/riscv,aclint-mtimer.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/riscv,aclint-mtimer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V ACLINT M-level Timer
+
+maintainers:
+  - Anup Patel <anup.patel@wdc.com>
+
+description:
+  RISC-V SOCs include an implementation of the M-level timer (MTIMER) defined
+  in the RISC-V Advanced Core Local Interruptor (ACLINT) specification. The
+  ACLINT MTIMER device is documented in the RISC-V ACLINT specification found
+  at https://github.com/riscv/riscv-aclint/blob/main/riscv-aclint.adoc.
+
+  The ACLINT MTIMER device directly connects to the M-level timer interrupt
+  lines of various HARTs (or CPUs) so the RISC-V per-HART (or per-CPU) local
+  interrupt controller is the parent interrupt controller for the ACLINT
+  MTIMER device.
+
+  The clock frequency of ACLINT is specified via "timebase-frequency" DT
+  property of "/cpus" DT node. The "timebase-frequency" DT property is
+  described in Documentation/devicetree/bindings/riscv/cpus.yaml
+
+properties:
+  compatible:
+    enum:
+      - riscv,aclint-mtimer
+
+    description:
+      Should be "riscv,aclint-mtimer" or "<vendor>,<chip>-aclint-mtimer".
+
+  reg:
+    description: |
+      Specifies base physical address(s) of the MTIME register and MTIMECMPx
+      registers. The 1st region is the MTIME register base and size. The 2nd
+      region is the MTIMECMPx registers base and size.
+    minItems: 2
+    maxItems: 2
+
+  interrupts-extended:
+    minItems: 1
+    maxItems: 4095
+
+  mtimer,no-64bit-mmio:
+    type: boolean
+    description: If present, the timer does not support 64-bit MMIO accesses
+      for both MTIME and MTIMECMP registers.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts-extended
+
+examples:
+  - |
+    timer@2000000 {
+      compatible = "riscv,aclint-mtimer";
+      reg = <0x2000000 0x8>,
+            <0x2004000 0x7ff8>;
+      interrupts-extended = <&cpu1intc 7>,
+                            <&cpu2intc 7>,
+                            <&cpu3intc 7>,
+                            <&cpu4intc 7>;
+    };
+...
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [RFC PATCH v3 10/11] clocksource: clint: Add support for ACLINT MTIMER device
  2021-08-30  4:17 [RFC PATCH v3 00/11] Linux RISC-V ACLINT Support Anup Patel
                   ` (8 preceding siblings ...)
  2021-08-30  4:17 ` [RFC PATCH v3 09/11] dt-bindings: timer: Add ACLINT MTIMER bindings Anup Patel
@ 2021-08-30  4:17 ` Anup Patel
  2021-08-30  4:17 ` [RFC PATCH v3 11/11] MAINTAINERS: Add entry for RISC-V ACLINT drivers Anup Patel
  10 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2021-08-30  4:17 UTC (permalink / raw)
  To: Palmer Dabbelt, Palmer Dabbelt, Paul Walmsley, Thomas Gleixner,
	Marc Zyngier, Daniel Lezcano, Rob Herring
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, devicetree, Anup Patel, Bin Meng

The RISC-V ACLINT specification is a modular specification and the
ACLINT MTIMER device is backward compatible with the M-mode timer
functionality of the CLINT device. This patch extends the CLINT
timer driver to support both CLINT device and ACLINT MTIMER device.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
---
 drivers/clocksource/timer-clint.c | 46 +++++++++++++++++++++++--------
 1 file changed, 34 insertions(+), 12 deletions(-)

diff --git a/drivers/clocksource/timer-clint.c b/drivers/clocksource/timer-clint.c
index 3b68ed53fe4a..10bbaf1bcf04 100644
--- a/drivers/clocksource/timer-clint.c
+++ b/drivers/clocksource/timer-clint.c
@@ -2,8 +2,16 @@
 /*
  * Copyright (C) 2020 Western Digital Corporation or its affiliates.
  *
- * Most of the M-mode (i.e. NoMMU) RISC-V systems usually have a
- * CLINT MMIO timer device.
+ * Most of the M-mode (i.e. NoMMU) RISC-V systems usually have a CLINT
+ * MMIO device which is a composite device capable of injecting M-mode
+ * software interrupts and M-mode timer interrupts.
+ *
+ * The RISC-V ACLINT specification is modular in nature and defines
+ * separate devices for M-mode software interrupt (MSWI), M-mode timer
+ * (MTIMER) and S-mode software interrupt (SSWI).
+ *
+ * This is a common timer driver for the CLINT device and the ACLINT
+ * MTIMER device.
  */
 
 #define pr_fmt(fmt) "clint: " fmt
@@ -21,8 +29,11 @@
 #include <linux/smp.h>
 #include <linux/timex.h>
 
-#ifndef CONFIG_RISCV_M_MODE
+#ifdef CONFIG_RISCV_M_MODE
 #include <asm/clint.h>
+
+u64 __iomem *clint_time_val;
+EXPORT_SYMBOL(clint_time_val);
 #endif
 
 #define CLINT_IPI_OFF		0
@@ -35,11 +46,6 @@ static u64 __iomem *clint_timer_val;
 static unsigned long clint_timer_freq;
 static unsigned int clint_timer_irq;
 
-#ifdef CONFIG_RISCV_M_MODE
-u64 __iomem *clint_time_val;
-EXPORT_SYMBOL(clint_time_val);
-#endif
-
 #ifdef CONFIG_64BIT
 #define clint_get_cycles()	readq_relaxed(clint_timer_val)
 #else
@@ -129,7 +135,8 @@ static int __init clint_timer_init_dt(struct device_node *np)
 {
 	int rc;
 	u32 i, nr_irqs;
-	void __iomem *base;
+	void __iomem *base = NULL;
+	void __iomem *base1 = NULL;
 	struct of_phandle_args oirq;
 
 	/*
@@ -170,8 +177,19 @@ static int __init clint_timer_init_dt(struct device_node *np)
 		return -ENODEV;
 	}
 
-	clint_timer_cmp = base + CLINT_TIMER_CMP_OFF;
-	clint_timer_val = base + CLINT_TIMER_VAL_OFF;
+	if (of_device_is_compatible(np, "riscv,aclint-mtimer")) {
+		clint_timer_val = base;
+		base1 = of_iomap(np, 1);
+		if (!base1) {
+			rc = -ENODEV;
+			pr_err("%pOFP: could not map registers\n", np);
+			goto fail_iounmap;
+		}
+		clint_timer_cmp = base1;
+	} else {
+		clint_timer_cmp = base + CLINT_TIMER_CMP_OFF;
+		clint_timer_val = base + CLINT_TIMER_VAL_OFF;
+	}
 	clint_timer_freq = riscv_timebase;
 
 #ifdef CONFIG_RISCV_M_MODE
@@ -213,9 +231,13 @@ static int __init clint_timer_init_dt(struct device_node *np)
 fail_free_irq:
 	free_irq(clint_timer_irq, &clint_clock_event);
 fail_iounmap:
-	iounmap(base);
+	if (base1)
+		iounmap(base1);
+	if (base)
+		iounmap(base);
 	return rc;
 }
 
 TIMER_OF_DECLARE(clint_timer, "riscv,clint0", clint_timer_init_dt);
 TIMER_OF_DECLARE(clint_timer1, "sifive,clint0", clint_timer_init_dt);
+TIMER_OF_DECLARE(clint_timer2, "riscv,aclint-mtimer", clint_timer_init_dt);
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [RFC PATCH v3 11/11] MAINTAINERS: Add entry for RISC-V ACLINT drivers
  2021-08-30  4:17 [RFC PATCH v3 00/11] Linux RISC-V ACLINT Support Anup Patel
                   ` (9 preceding siblings ...)
  2021-08-30  4:17 ` [RFC PATCH v3 10/11] clocksource: clint: Add support for ACLINT MTIMER device Anup Patel
@ 2021-08-30  4:17 ` Anup Patel
  10 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2021-08-30  4:17 UTC (permalink / raw)
  To: Palmer Dabbelt, Palmer Dabbelt, Paul Walmsley, Thomas Gleixner,
	Marc Zyngier, Daniel Lezcano, Rob Herring
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, devicetree, Anup Patel, Bin Meng

Add myself as maintainer for RISC-V ACLINT drivers.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
---
 MAINTAINERS | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index bcc97d48249f..3bc36e30ef07 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15936,6 +15936,15 @@ S:	Maintained
 F:	drivers/mtd/nand/raw/r852.c
 F:	drivers/mtd/nand/raw/r852.h
 
+RISC-V ACLINT DRIVERS
+M:	Anup Patel <anup.patel@wdc.com>
+L:	linux-riscv@lists.infradead.org
+S:	Supported
+F:	Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml
+F:	Documentation/devicetree/bindings/timer/riscv,aclint-mtimer.yaml
+F:	drivers/clocksource/timer-clint.c
+F:	drivers/irqchip/irq-riscv-aclint-swi.c
+
 RISC-V ARCHITECTURE
 M:	Paul Walmsley <paul.walmsley@sifive.com>
 M:	Palmer Dabbelt <palmer@dabbelt.com>
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 22+ messages in thread

* Re: [RFC PATCH v3 05/11] dt-bindings: interrupt-controller: Add ACLINT MSWI and SSWI bindings
  2021-08-30  4:17 ` [RFC PATCH v3 05/11] dt-bindings: interrupt-controller: Add ACLINT MSWI and SSWI bindings Anup Patel
@ 2021-09-01  1:24   ` Rob Herring
  2021-09-01 11:56     ` Anup Patel
  0 siblings, 1 reply; 22+ messages in thread
From: Rob Herring @ 2021-09-01  1:24 UTC (permalink / raw)
  To: Anup Patel
  Cc: Palmer Dabbelt, Palmer Dabbelt, Paul Walmsley, Thomas Gleixner,
	Marc Zyngier, Daniel Lezcano, Atish Patra, Alistair Francis,
	Anup Patel, linux-riscv, linux-kernel, devicetree, Bin Meng

On Mon, Aug 30, 2021 at 09:47:23AM +0530, Anup Patel wrote:
> We add DT bindings documentation for the ACLINT MSWI and SSWI
> devices found on RISC-V SOCs.
> 
> Signed-off-by: Anup Patel <anup.patel@wdc.com>
> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
> ---
>  .../riscv,aclint-swi.yaml                     | 95 +++++++++++++++++++
>  1 file changed, 95 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml b/Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml
> new file mode 100644
> index 000000000000..68563259ae24
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml
> @@ -0,0 +1,95 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interrupt-controller/riscv,aclint-swi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: RISC-V ACLINT Software Interrupt Devices
> +
> +maintainers:
> +  - Anup Patel <anup.patel@wdc.com>
> +
> +description:
> +  RISC-V SOCs include an implementation of the M-level software interrupt
> +  (MSWI) device and the S-level software interrupt (SSWI) device defined
> +  in the RISC-V Advanced Core Local Interruptor (ACLINT) specification.
> +
> +  The ACLINT MSWI and SSWI devices are documented in the RISC-V ACLINT
> +  specification located at
> +  https://github.com/riscv/riscv-aclint/blob/main/riscv-aclint.adoc.
> +
> +  The ACLINT MSWI and SSWI devices directly connect to the M-level and
> +  S-level software interrupt lines of various HARTs (or CPUs) respectively
> +  so the RISC-V per-HART (or per-CPU) local interrupt controller is the
> +  parent interrupt controller for the ACLINT MSWI and SSWI devices.
> +
> +allOf:
> +  - $ref: /schemas/interrupt-controller.yaml#
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +        - enum:
> +          - riscv,aclint-mswi
> +
> +      - items:
> +        - enum:
> +          - riscv,aclint-sswi

All this can be just:

enum:
  - riscv,aclint-mswi
  - riscv,aclint-sswi

However...

> +
> +    description:
> +      For ACLINT MSWI devices, it should be "riscv,aclint-mswi" OR
> +      "<vendor>,<chip>-aclint-mswi".
> +      For ACLINT SSWI devices, it should be "riscv,aclint-sswi" OR
> +      "<vendor>,<chip>-aclint-sswi".

s/OR/AND/

There must be a compatible for the implementation. Unless RiscV 
implementations of specs are complete describing all clocks, power 
domains, resets, etc. and are quirk free.

But don't write free form constraints...


> +
> +  reg:
> +    maxItems: 1
> +
> +  "#interrupt-cells":
> +    const: 0
> +
> +  interrupts-extended:
> +    minItems: 1
> +    maxItems: 4095
> +
> +  interrupt-controller: true
> +
> +additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts-extended
> +  - interrupt-controller
> +  - "#interrupt-cells"
> +
> +examples:
> +  - |
> +    // Example 1 (RISC-V MSWI device used by Linux RISC-V NoMMU kernel):
> +
> +    interrupt-controller@2000000 {
> +      compatible = "riscv,aclint-mswi";
> +      interrupts-extended = <&cpu1intc 3>,
> +                            <&cpu2intc 3>,
> +                            <&cpu3intc 3>,
> +                            <&cpu4intc 3>;
> +      reg = <0x2000000 0x4000>;
> +      interrupt-controller;
> +      #interrupt-cells = <0>;
> +    };
> +
> +  - |
> +    // Example 2 (RISC-V SSWI device used by Linux RISC-V MMU kernel):
> +
> +    interrupt-controller@2100000 {
> +      compatible = "riscv,aclint-sswi";
> +      interrupts-extended = <&cpu1intc 1>,
> +                            <&cpu2intc 1>,
> +                            <&cpu3intc 1>,
> +                            <&cpu4intc 1>;
> +      reg = <0x2100000 0x4000>;
> +      interrupt-controller;
> +      #interrupt-cells = <0>;
> +    };
> +...
> -- 
> 2.25.1
> 
> 

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [RFC PATCH v3 06/11] dt-bindings: timer: Update SiFive CLINT bindings for IPI support
  2021-08-30  4:17 ` [RFC PATCH v3 06/11] dt-bindings: timer: Update SiFive CLINT bindings for IPI support Anup Patel
@ 2021-09-01  1:29   ` Rob Herring
  2021-09-01 12:00     ` Anup Patel
  0 siblings, 1 reply; 22+ messages in thread
From: Rob Herring @ 2021-09-01  1:29 UTC (permalink / raw)
  To: Anup Patel
  Cc: Palmer Dabbelt, Palmer Dabbelt, Paul Walmsley, Thomas Gleixner,
	Marc Zyngier, Daniel Lezcano, Atish Patra, Alistair Francis,
	Anup Patel, linux-riscv, linux-kernel, devicetree

On Mon, Aug 30, 2021 at 09:47:24AM +0530, Anup Patel wrote:
> The Linux RISC-V now treats IPIs as regular per-CPU IRQs. This means
> we have to create a IPI interrupt domain to use CLINT IPI functionality
> hence requiring a "interrupt-controller" and "#interrupt-cells" DT
> property in CLINT DT nodes.
> 
> Impact of this CLINT DT bindings change only affects Linux RISC-V
> NoMMU kernel and has no effect of existing M-mode runtime firmwares
> (i.e. OpenSBI).

It appears to me you should fix Linux to not need these 2 useless 
properties. I say useless because #interrupt-cells being 0 is pretty 
useless.

> 
> Signed-off-by: Anup Patel <anup.patel@wdc.com>
> ---
>  .../bindings/timer/sifive,clint.yaml          | 20 ++++++++++++++-----
>  arch/riscv/boot/dts/canaan/k210.dtsi          |  2 ++
>  .../boot/dts/microchip/microchip-mpfs.dtsi    |  2 ++
>  3 files changed, 19 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
> index a35952f48742..9c8ef9f4094f 100644
> --- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml
> +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
> @@ -43,6 +43,12 @@ properties:
>  
>    interrupts-extended:
>      minItems: 1
> +    maxItems: 4095
> +
> +  "#interrupt-cells":
> +    const: 0
> +
> +  interrupt-controller: true
>  
>  additionalProperties: false
>  
> @@ -50,15 +56,19 @@ required:
>    - compatible
>    - reg
>    - interrupts-extended
> +  - interrupt-controller
> +  - "#interrupt-cells"
>  
>  examples:
>    - |
>      timer@2000000 {
>        compatible = "sifive,fu540-c000-clint", "sifive,clint0";
> -      interrupts-extended = <&cpu1intc 3 &cpu1intc 7
> -                             &cpu2intc 3 &cpu2intc 7
> -                             &cpu3intc 3 &cpu3intc 7
> -                             &cpu4intc 3 &cpu4intc 7>;
> -       reg = <0x2000000 0x10000>;
> +      interrupts-extended = <&cpu1intc 3>, <&cpu1intc 7>,
> +                            <&cpu2intc 3>, <&cpu2intc 7>,
> +                            <&cpu3intc 3>, <&cpu3intc 7>,
> +                            <&cpu4intc 3>, <&cpu4intc 7>;
> +      reg = <0x2000000 0x10000>;
> +      interrupt-controller;
> +      #interrupt-cells = <0>;
>      };
>  ...
> diff --git a/arch/riscv/boot/dts/canaan/k210.dtsi b/arch/riscv/boot/dts/canaan/k210.dtsi
> index 5e8ca8142482..67dcda1efadb 100644
> --- a/arch/riscv/boot/dts/canaan/k210.dtsi
> +++ b/arch/riscv/boot/dts/canaan/k210.dtsi
> @@ -105,6 +105,8 @@ clint0: timer@2000000 {
>  			reg = <0x2000000 0xC000>;
>  			interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
>  					      &cpu1_intc 3 &cpu1_intc 7>;
> +			#interrupt-cells = <0>;
> +			interrupt-controller;
>  		};
>  
>  		plic0: interrupt-controller@c000000 {
> diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> index b9819570a7d1..67fb41439f20 100644
> --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> @@ -168,6 +168,8 @@ &cpu1_intc 3 &cpu1_intc 7
>  						&cpu2_intc 3 &cpu2_intc 7
>  						&cpu3_intc 3 &cpu3_intc 7
>  						&cpu4_intc 3 &cpu4_intc 7>;
> +			#interrupt-cells = <0>;
> +			interrupt-controller;
>  		};
>  
>  		plic: interrupt-controller@c000000 {
> -- 
> 2.25.1
> 
> 

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [RFC PATCH v3 09/11] dt-bindings: timer: Add ACLINT MTIMER bindings
  2021-08-30  4:17 ` [RFC PATCH v3 09/11] dt-bindings: timer: Add ACLINT MTIMER bindings Anup Patel
@ 2021-09-01  1:31   ` Rob Herring
  0 siblings, 0 replies; 22+ messages in thread
From: Rob Herring @ 2021-09-01  1:31 UTC (permalink / raw)
  To: Anup Patel
  Cc: Palmer Dabbelt, Palmer Dabbelt, Paul Walmsley, Thomas Gleixner,
	Marc Zyngier, Daniel Lezcano, Atish Patra, Alistair Francis,
	Anup Patel, linux-riscv, linux-kernel, devicetree, Bin Meng

On Mon, Aug 30, 2021 at 09:47:27AM +0530, Anup Patel wrote:
> We add DT bindings documentation for the ACLINT MTIMER device
> found on RISC-V SOCs.
> 
> Signed-off-by: Anup Patel <anup.patel@wdc.com>
> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
> ---
>  .../bindings/timer/riscv,aclint-mtimer.yaml   | 70 +++++++++++++++++++
>  1 file changed, 70 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/timer/riscv,aclint-mtimer.yaml
> 
> diff --git a/Documentation/devicetree/bindings/timer/riscv,aclint-mtimer.yaml b/Documentation/devicetree/bindings/timer/riscv,aclint-mtimer.yaml
> new file mode 100644
> index 000000000000..b0b2ee6c761c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/riscv,aclint-mtimer.yaml
> @@ -0,0 +1,70 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/timer/riscv,aclint-mtimer.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: RISC-V ACLINT M-level Timer
> +
> +maintainers:
> +  - Anup Patel <anup.patel@wdc.com>
> +
> +description:
> +  RISC-V SOCs include an implementation of the M-level timer (MTIMER) defined
> +  in the RISC-V Advanced Core Local Interruptor (ACLINT) specification. The
> +  ACLINT MTIMER device is documented in the RISC-V ACLINT specification found
> +  at https://github.com/riscv/riscv-aclint/blob/main/riscv-aclint.adoc.
> +
> +  The ACLINT MTIMER device directly connects to the M-level timer interrupt
> +  lines of various HARTs (or CPUs) so the RISC-V per-HART (or per-CPU) local
> +  interrupt controller is the parent interrupt controller for the ACLINT
> +  MTIMER device.
> +
> +  The clock frequency of ACLINT is specified via "timebase-frequency" DT
> +  property of "/cpus" DT node. The "timebase-frequency" DT property is
> +  described in Documentation/devicetree/bindings/riscv/cpus.yaml
> +
> +properties:
> +  compatible:
> +    enum:
> +      - riscv,aclint-mtimer
> +
> +    description:
> +      Should be "riscv,aclint-mtimer" or "<vendor>,<chip>-aclint-mtimer".

Again, should be AND.

> +
> +  reg:
> +    description: |
> +      Specifies base physical address(s) of the MTIME register and MTIMECMPx
> +      registers. The 1st region is the MTIME register base and size. The 2nd
> +      region is the MTIMECMPx registers base and size.
> +    minItems: 2
> +    maxItems: 2
> +
> +  interrupts-extended:
> +    minItems: 1
> +    maxItems: 4095
> +
> +  mtimer,no-64bit-mmio:
> +    type: boolean
> +    description: If present, the timer does not support 64-bit MMIO accesses
> +      for both MTIME and MTIMECMP registers.

This should be implied by the compatible.

> +
> +additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts-extended
> +
> +examples:
> +  - |
> +    timer@2000000 {
> +      compatible = "riscv,aclint-mtimer";
> +      reg = <0x2000000 0x8>,
> +            <0x2004000 0x7ff8>;
> +      interrupts-extended = <&cpu1intc 7>,
> +                            <&cpu2intc 7>,
> +                            <&cpu3intc 7>,
> +                            <&cpu4intc 7>;
> +    };
> +...
> -- 
> 2.25.1
> 
> 

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [RFC PATCH v3 05/11] dt-bindings: interrupt-controller: Add ACLINT MSWI and SSWI bindings
  2021-09-01  1:24   ` Rob Herring
@ 2021-09-01 11:56     ` Anup Patel
  2021-09-02  0:33       ` Rob Herring
  0 siblings, 1 reply; 22+ messages in thread
From: Anup Patel @ 2021-09-01 11:56 UTC (permalink / raw)
  To: Rob Herring
  Cc: Anup Patel, Palmer Dabbelt, Palmer Dabbelt, Paul Walmsley,
	Thomas Gleixner, Marc Zyngier, Daniel Lezcano, Atish Patra,
	Alistair Francis, linux-riscv, linux-kernel@vger.kernel.org List,
	DTML, Bin Meng

On Wed, Sep 1, 2021 at 6:54 AM Rob Herring <robh@kernel.org> wrote:
>
> On Mon, Aug 30, 2021 at 09:47:23AM +0530, Anup Patel wrote:
> > We add DT bindings documentation for the ACLINT MSWI and SSWI
> > devices found on RISC-V SOCs.
> >
> > Signed-off-by: Anup Patel <anup.patel@wdc.com>
> > Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
> > ---
> >  .../riscv,aclint-swi.yaml                     | 95 +++++++++++++++++++
> >  1 file changed, 95 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml b/Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml
> > new file mode 100644
> > index 000000000000..68563259ae24
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml
> > @@ -0,0 +1,95 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/interrupt-controller/riscv,aclint-swi.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: RISC-V ACLINT Software Interrupt Devices
> > +
> > +maintainers:
> > +  - Anup Patel <anup.patel@wdc.com>
> > +
> > +description:
> > +  RISC-V SOCs include an implementation of the M-level software interrupt
> > +  (MSWI) device and the S-level software interrupt (SSWI) device defined
> > +  in the RISC-V Advanced Core Local Interruptor (ACLINT) specification.
> > +
> > +  The ACLINT MSWI and SSWI devices are documented in the RISC-V ACLINT
> > +  specification located at
> > +  https://github.com/riscv/riscv-aclint/blob/main/riscv-aclint.adoc.
> > +
> > +  The ACLINT MSWI and SSWI devices directly connect to the M-level and
> > +  S-level software interrupt lines of various HARTs (or CPUs) respectively
> > +  so the RISC-V per-HART (or per-CPU) local interrupt controller is the
> > +  parent interrupt controller for the ACLINT MSWI and SSWI devices.
> > +
> > +allOf:
> > +  - $ref: /schemas/interrupt-controller.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - items:
> > +        - enum:
> > +          - riscv,aclint-mswi
> > +
> > +      - items:
> > +        - enum:
> > +          - riscv,aclint-sswi
>
> All this can be just:
>
> enum:
>   - riscv,aclint-mswi
>   - riscv,aclint-sswi
>
> However...
>
> > +
> > +    description:
> > +      For ACLINT MSWI devices, it should be "riscv,aclint-mswi" OR
> > +      "<vendor>,<chip>-aclint-mswi".
> > +      For ACLINT SSWI devices, it should be "riscv,aclint-sswi" OR
> > +      "<vendor>,<chip>-aclint-sswi".
>
> s/OR/AND/
>
> There must be a compatible for the implementation. Unless RiscV
> implementations of specs are complete describing all clocks, power
> domains, resets, etc. and are quirk free.
>
> But don't write free form constraints...

It is possible that quite a few implementations (QEMU, FPGAs, and
other simulators) will not require implementation specific compatible
strings. Should we still mandate implementation specific compatible
strings in DTS for such cases?

I was not sure so I used "OR".

Regards,
Anup

>
>
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  "#interrupt-cells":
> > +    const: 0
> > +
> > +  interrupts-extended:
> > +    minItems: 1
> > +    maxItems: 4095
> > +
> > +  interrupt-controller: true
> > +
> > +additionalProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts-extended
> > +  - interrupt-controller
> > +  - "#interrupt-cells"
> > +
> > +examples:
> > +  - |
> > +    // Example 1 (RISC-V MSWI device used by Linux RISC-V NoMMU kernel):
> > +
> > +    interrupt-controller@2000000 {
> > +      compatible = "riscv,aclint-mswi";
> > +      interrupts-extended = <&cpu1intc 3>,
> > +                            <&cpu2intc 3>,
> > +                            <&cpu3intc 3>,
> > +                            <&cpu4intc 3>;
> > +      reg = <0x2000000 0x4000>;
> > +      interrupt-controller;
> > +      #interrupt-cells = <0>;
> > +    };
> > +
> > +  - |
> > +    // Example 2 (RISC-V SSWI device used by Linux RISC-V MMU kernel):
> > +
> > +    interrupt-controller@2100000 {
> > +      compatible = "riscv,aclint-sswi";
> > +      interrupts-extended = <&cpu1intc 1>,
> > +                            <&cpu2intc 1>,
> > +                            <&cpu3intc 1>,
> > +                            <&cpu4intc 1>;
> > +      reg = <0x2100000 0x4000>;
> > +      interrupt-controller;
> > +      #interrupt-cells = <0>;
> > +    };
> > +...
> > --
> > 2.25.1
> >
> >

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [RFC PATCH v3 06/11] dt-bindings: timer: Update SiFive CLINT bindings for IPI support
  2021-09-01  1:29   ` Rob Herring
@ 2021-09-01 12:00     ` Anup Patel
  2021-09-02  0:18       ` Rob Herring
  0 siblings, 1 reply; 22+ messages in thread
From: Anup Patel @ 2021-09-01 12:00 UTC (permalink / raw)
  To: Rob Herring
  Cc: Anup Patel, Palmer Dabbelt, Palmer Dabbelt, Paul Walmsley,
	Thomas Gleixner, Marc Zyngier, Daniel Lezcano, Atish Patra,
	Alistair Francis, linux-riscv, linux-kernel@vger.kernel.org List,
	DTML

On Wed, Sep 1, 2021 at 6:59 AM Rob Herring <robh@kernel.org> wrote:
>
> On Mon, Aug 30, 2021 at 09:47:24AM +0530, Anup Patel wrote:
> > The Linux RISC-V now treats IPIs as regular per-CPU IRQs. This means
> > we have to create a IPI interrupt domain to use CLINT IPI functionality
> > hence requiring a "interrupt-controller" and "#interrupt-cells" DT
> > property in CLINT DT nodes.
> >
> > Impact of this CLINT DT bindings change only affects Linux RISC-V
> > NoMMU kernel and has no effect of existing M-mode runtime firmwares
> > (i.e. OpenSBI).
>
> It appears to me you should fix Linux to not need these 2 useless
> properties. I say useless because #interrupt-cells being 0 is pretty
> useless.

Linux IRQCHIP framework only probes IRQCHIP DT nodes which
have "interrupt-controller" DT property. The "interrupt-cells" DT property
can be removed because as an interrupt controller SiFive CLINT
will only provide IPIs to arch code.

Regards,
Anup

>
> >
> > Signed-off-by: Anup Patel <anup.patel@wdc.com>
> > ---
> >  .../bindings/timer/sifive,clint.yaml          | 20 ++++++++++++++-----
> >  arch/riscv/boot/dts/canaan/k210.dtsi          |  2 ++
> >  .../boot/dts/microchip/microchip-mpfs.dtsi    |  2 ++
> >  3 files changed, 19 insertions(+), 5 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
> > index a35952f48742..9c8ef9f4094f 100644
> > --- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml
> > +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
> > @@ -43,6 +43,12 @@ properties:
> >
> >    interrupts-extended:
> >      minItems: 1
> > +    maxItems: 4095
> > +
> > +  "#interrupt-cells":
> > +    const: 0
> > +
> > +  interrupt-controller: true
> >
> >  additionalProperties: false
> >
> > @@ -50,15 +56,19 @@ required:
> >    - compatible
> >    - reg
> >    - interrupts-extended
> > +  - interrupt-controller
> > +  - "#interrupt-cells"
> >
> >  examples:
> >    - |
> >      timer@2000000 {
> >        compatible = "sifive,fu540-c000-clint", "sifive,clint0";
> > -      interrupts-extended = <&cpu1intc 3 &cpu1intc 7
> > -                             &cpu2intc 3 &cpu2intc 7
> > -                             &cpu3intc 3 &cpu3intc 7
> > -                             &cpu4intc 3 &cpu4intc 7>;
> > -       reg = <0x2000000 0x10000>;
> > +      interrupts-extended = <&cpu1intc 3>, <&cpu1intc 7>,
> > +                            <&cpu2intc 3>, <&cpu2intc 7>,
> > +                            <&cpu3intc 3>, <&cpu3intc 7>,
> > +                            <&cpu4intc 3>, <&cpu4intc 7>;
> > +      reg = <0x2000000 0x10000>;
> > +      interrupt-controller;
> > +      #interrupt-cells = <0>;
> >      };
> >  ...
> > diff --git a/arch/riscv/boot/dts/canaan/k210.dtsi b/arch/riscv/boot/dts/canaan/k210.dtsi
> > index 5e8ca8142482..67dcda1efadb 100644
> > --- a/arch/riscv/boot/dts/canaan/k210.dtsi
> > +++ b/arch/riscv/boot/dts/canaan/k210.dtsi
> > @@ -105,6 +105,8 @@ clint0: timer@2000000 {
> >                       reg = <0x2000000 0xC000>;
> >                       interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
> >                                             &cpu1_intc 3 &cpu1_intc 7>;
> > +                     #interrupt-cells = <0>;
> > +                     interrupt-controller;
> >               };
> >
> >               plic0: interrupt-controller@c000000 {
> > diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> > index b9819570a7d1..67fb41439f20 100644
> > --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> > @@ -168,6 +168,8 @@ &cpu1_intc 3 &cpu1_intc 7
> >                                               &cpu2_intc 3 &cpu2_intc 7
> >                                               &cpu3_intc 3 &cpu3_intc 7
> >                                               &cpu4_intc 3 &cpu4_intc 7>;
> > +                     #interrupt-cells = <0>;
> > +                     interrupt-controller;
> >               };
> >
> >               plic: interrupt-controller@c000000 {
> > --
> > 2.25.1
> >
> >

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [RFC PATCH v3 06/11] dt-bindings: timer: Update SiFive CLINT bindings for IPI support
  2021-09-01 12:00     ` Anup Patel
@ 2021-09-02  0:18       ` Rob Herring
  2021-09-02  5:37         ` Anup Patel
  0 siblings, 1 reply; 22+ messages in thread
From: Rob Herring @ 2021-09-02  0:18 UTC (permalink / raw)
  To: Anup Patel
  Cc: Anup Patel, Palmer Dabbelt, Palmer Dabbelt, Paul Walmsley,
	Thomas Gleixner, Marc Zyngier, Daniel Lezcano, Atish Patra,
	Alistair Francis, linux-riscv, linux-kernel@vger.kernel.org List,
	DTML

On Wed, Sep 1, 2021 at 7:00 AM Anup Patel <anup@brainfault.org> wrote:
>
> On Wed, Sep 1, 2021 at 6:59 AM Rob Herring <robh@kernel.org> wrote:
> >
> > On Mon, Aug 30, 2021 at 09:47:24AM +0530, Anup Patel wrote:
> > > The Linux RISC-V now treats IPIs as regular per-CPU IRQs. This means
> > > we have to create a IPI interrupt domain to use CLINT IPI functionality
> > > hence requiring a "interrupt-controller" and "#interrupt-cells" DT
> > > property in CLINT DT nodes.
> > >
> > > Impact of this CLINT DT bindings change only affects Linux RISC-V
> > > NoMMU kernel and has no effect of existing M-mode runtime firmwares
> > > (i.e. OpenSBI).
> >
> > It appears to me you should fix Linux to not need these 2 useless
> > properties. I say useless because #interrupt-cells being 0 is pretty
> > useless.
>
> Linux IRQCHIP framework only probes IRQCHIP DT nodes which
> have "interrupt-controller" DT property.

Right, I believe I wrote that... So what would it look like to fix
that? The simplest thing is just drop the check for
'interrupt-controller'. That's just a sanity check and we have other
ways to do that now (schemas). Do you need this early? You can always
implement your own initcall.


> The "interrupt-cells" DT property
> can be removed because as an interrupt controller SiFive CLINT
> will only provide IPIs to arch code.

The schema will disagree.

Rob

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [RFC PATCH v3 05/11] dt-bindings: interrupt-controller: Add ACLINT MSWI and SSWI bindings
  2021-09-01 11:56     ` Anup Patel
@ 2021-09-02  0:33       ` Rob Herring
  2021-09-03 10:40         ` Anup Patel
  0 siblings, 1 reply; 22+ messages in thread
From: Rob Herring @ 2021-09-02  0:33 UTC (permalink / raw)
  To: Anup Patel
  Cc: Anup Patel, Palmer Dabbelt, Palmer Dabbelt, Paul Walmsley,
	Thomas Gleixner, Marc Zyngier, Daniel Lezcano, Atish Patra,
	Alistair Francis, linux-riscv, linux-kernel@vger.kernel.org List,
	DTML, Bin Meng

On Wed, Sep 1, 2021 at 6:56 AM Anup Patel <anup@brainfault.org> wrote:
>
> On Wed, Sep 1, 2021 at 6:54 AM Rob Herring <robh@kernel.org> wrote:
> >
> > On Mon, Aug 30, 2021 at 09:47:23AM +0530, Anup Patel wrote:
> > > We add DT bindings documentation for the ACLINT MSWI and SSWI
> > > devices found on RISC-V SOCs.
> > >
> > > Signed-off-by: Anup Patel <anup.patel@wdc.com>
> > > Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
> > > ---
> > >  .../riscv,aclint-swi.yaml                     | 95 +++++++++++++++++++
> > >  1 file changed, 95 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml b/Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml
> > > new file mode 100644
> > > index 000000000000..68563259ae24
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml
> > > @@ -0,0 +1,95 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/interrupt-controller/riscv,aclint-swi.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: RISC-V ACLINT Software Interrupt Devices
> > > +
> > > +maintainers:
> > > +  - Anup Patel <anup.patel@wdc.com>
> > > +
> > > +description:
> > > +  RISC-V SOCs include an implementation of the M-level software interrupt
> > > +  (MSWI) device and the S-level software interrupt (SSWI) device defined
> > > +  in the RISC-V Advanced Core Local Interruptor (ACLINT) specification.
> > > +
> > > +  The ACLINT MSWI and SSWI devices are documented in the RISC-V ACLINT
> > > +  specification located at
> > > +  https://github.com/riscv/riscv-aclint/blob/main/riscv-aclint.adoc.
> > > +
> > > +  The ACLINT MSWI and SSWI devices directly connect to the M-level and
> > > +  S-level software interrupt lines of various HARTs (or CPUs) respectively
> > > +  so the RISC-V per-HART (or per-CPU) local interrupt controller is the
> > > +  parent interrupt controller for the ACLINT MSWI and SSWI devices.
> > > +
> > > +allOf:
> > > +  - $ref: /schemas/interrupt-controller.yaml#
> > > +
> > > +properties:
> > > +  compatible:
> > > +    oneOf:
> > > +      - items:
> > > +        - enum:
> > > +          - riscv,aclint-mswi
> > > +
> > > +      - items:
> > > +        - enum:
> > > +          - riscv,aclint-sswi
> >
> > All this can be just:
> >
> > enum:
> >   - riscv,aclint-mswi
> >   - riscv,aclint-sswi
> >
> > However...
> >
> > > +
> > > +    description:
> > > +      For ACLINT MSWI devices, it should be "riscv,aclint-mswi" OR
> > > +      "<vendor>,<chip>-aclint-mswi".
> > > +      For ACLINT SSWI devices, it should be "riscv,aclint-sswi" OR
> > > +      "<vendor>,<chip>-aclint-sswi".
> >
> > s/OR/AND/
> >
> > There must be a compatible for the implementation. Unless RiscV
> > implementations of specs are complete describing all clocks, power
> > domains, resets, etc. and are quirk free.
> >
> > But don't write free form constraints...
>
> It is possible that quite a few implementations (QEMU, FPGAs, and
> other simulators) will not require implementation specific compatible
> strings. Should we still mandate implementation specific compatible
> strings in DTS for such cases?

No, but the schema says you only have those cases. Are there not any
actual implementations?

Minimally make "<vendor>,<chip>-aclint-mswi" into a schema pattern for
the first entry and perhaps a note to replace with actual strings when
there are some. It's ultimately up to the RiscV maintainers to require
SoC specific compatibles here. Allowing a generic one alone makes that
harder because the schema can't enforce it.

Rob

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [RFC PATCH v3 06/11] dt-bindings: timer: Update SiFive CLINT bindings for IPI support
  2021-09-02  0:18       ` Rob Herring
@ 2021-09-02  5:37         ` Anup Patel
  0 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2021-09-02  5:37 UTC (permalink / raw)
  To: Rob Herring
  Cc: Anup Patel, Palmer Dabbelt, Palmer Dabbelt, Paul Walmsley,
	Thomas Gleixner, Marc Zyngier, Daniel Lezcano, Atish Patra,
	Alistair Francis, linux-riscv, linux-kernel@vger.kernel.org List,
	DTML

On Thu, Sep 2, 2021 at 5:48 AM Rob Herring <robh@kernel.org> wrote:
>
> On Wed, Sep 1, 2021 at 7:00 AM Anup Patel <anup@brainfault.org> wrote:
> >
> > On Wed, Sep 1, 2021 at 6:59 AM Rob Herring <robh@kernel.org> wrote:
> > >
> > > On Mon, Aug 30, 2021 at 09:47:24AM +0530, Anup Patel wrote:
> > > > The Linux RISC-V now treats IPIs as regular per-CPU IRQs. This means
> > > > we have to create a IPI interrupt domain to use CLINT IPI functionality
> > > > hence requiring a "interrupt-controller" and "#interrupt-cells" DT
> > > > property in CLINT DT nodes.
> > > >
> > > > Impact of this CLINT DT bindings change only affects Linux RISC-V
> > > > NoMMU kernel and has no effect of existing M-mode runtime firmwares
> > > > (i.e. OpenSBI).
> > >
> > > It appears to me you should fix Linux to not need these 2 useless
> > > properties. I say useless because #interrupt-cells being 0 is pretty
> > > useless.
> >
> > Linux IRQCHIP framework only probes IRQCHIP DT nodes which
> > have "interrupt-controller" DT property.
>
> Right, I believe I wrote that... So what would it look like to fix
> that? The simplest thing is just drop the check for
> 'interrupt-controller'. That's just a sanity check and we have other
> ways to do that now (schemas). Do you need this early? You can always
> implement your own initcall.

Okay, let me first try to fix this in the driver itself. Most likely,
we will not
require changes in this DT binding.

>
>
> > The "interrupt-cells" DT property
> > can be removed because as an interrupt controller SiFive CLINT
> > will only provide IPIs to arch code.
>
> The schema will disagree.

Okay.

>
> Rob

Regards,
Anup

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [RFC PATCH v3 05/11] dt-bindings: interrupt-controller: Add ACLINT MSWI and SSWI bindings
  2021-09-02  0:33       ` Rob Herring
@ 2021-09-03 10:40         ` Anup Patel
  2021-09-07 13:48           ` Rob Herring
  0 siblings, 1 reply; 22+ messages in thread
From: Anup Patel @ 2021-09-03 10:40 UTC (permalink / raw)
  To: Rob Herring
  Cc: Anup Patel, Palmer Dabbelt, Palmer Dabbelt, Paul Walmsley,
	Thomas Gleixner, Marc Zyngier, Daniel Lezcano, Atish Patra,
	Alistair Francis, linux-riscv, linux-kernel@vger.kernel.org List,
	DTML, Bin Meng

On Thu, Sep 2, 2021 at 6:04 AM Rob Herring <robh@kernel.org> wrote:
>
> On Wed, Sep 1, 2021 at 6:56 AM Anup Patel <anup@brainfault.org> wrote:
> >
> > On Wed, Sep 1, 2021 at 6:54 AM Rob Herring <robh@kernel.org> wrote:
> > >
> > > On Mon, Aug 30, 2021 at 09:47:23AM +0530, Anup Patel wrote:
> > > > We add DT bindings documentation for the ACLINT MSWI and SSWI
> > > > devices found on RISC-V SOCs.
> > > >
> > > > Signed-off-by: Anup Patel <anup.patel@wdc.com>
> > > > Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
> > > > ---
> > > >  .../riscv,aclint-swi.yaml                     | 95 +++++++++++++++++++
> > > >  1 file changed, 95 insertions(+)
> > > >  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml b/Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml
> > > > new file mode 100644
> > > > index 000000000000..68563259ae24
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml
> > > > @@ -0,0 +1,95 @@
> > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > +%YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/interrupt-controller/riscv,aclint-swi.yaml#
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title: RISC-V ACLINT Software Interrupt Devices
> > > > +
> > > > +maintainers:
> > > > +  - Anup Patel <anup.patel@wdc.com>
> > > > +
> > > > +description:
> > > > +  RISC-V SOCs include an implementation of the M-level software interrupt
> > > > +  (MSWI) device and the S-level software interrupt (SSWI) device defined
> > > > +  in the RISC-V Advanced Core Local Interruptor (ACLINT) specification.
> > > > +
> > > > +  The ACLINT MSWI and SSWI devices are documented in the RISC-V ACLINT
> > > > +  specification located at
> > > > +  https://github.com/riscv/riscv-aclint/blob/main/riscv-aclint.adoc.
> > > > +
> > > > +  The ACLINT MSWI and SSWI devices directly connect to the M-level and
> > > > +  S-level software interrupt lines of various HARTs (or CPUs) respectively
> > > > +  so the RISC-V per-HART (or per-CPU) local interrupt controller is the
> > > > +  parent interrupt controller for the ACLINT MSWI and SSWI devices.
> > > > +
> > > > +allOf:
> > > > +  - $ref: /schemas/interrupt-controller.yaml#
> > > > +
> > > > +properties:
> > > > +  compatible:
> > > > +    oneOf:
> > > > +      - items:
> > > > +        - enum:
> > > > +          - riscv,aclint-mswi
> > > > +
> > > > +      - items:
> > > > +        - enum:
> > > > +          - riscv,aclint-sswi
> > >
> > > All this can be just:
> > >
> > > enum:
> > >   - riscv,aclint-mswi
> > >   - riscv,aclint-sswi
> > >
> > > However...
> > >
> > > > +
> > > > +    description:
> > > > +      For ACLINT MSWI devices, it should be "riscv,aclint-mswi" OR
> > > > +      "<vendor>,<chip>-aclint-mswi".
> > > > +      For ACLINT SSWI devices, it should be "riscv,aclint-sswi" OR
> > > > +      "<vendor>,<chip>-aclint-sswi".
> > >
> > > s/OR/AND/
> > >
> > > There must be a compatible for the implementation. Unless RiscV
> > > implementations of specs are complete describing all clocks, power
> > > domains, resets, etc. and are quirk free.
> > >
> > > But don't write free form constraints...
> >
> > It is possible that quite a few implementations (QEMU, FPGAs, and
> > other simulators) will not require implementation specific compatible
> > strings. Should we still mandate implementation specific compatible
> > strings in DTS for such cases?
>
> No, but the schema says you only have those cases. Are there not any
> actual implementations?

All existing RISC-V boards have SiFive CLINT and ACLINT is backward
compatible with SiFive CLINT so we do have actual implementations.

None of the existing RISC-V boards have special clocks, power domain,
resets etc for these devices.

>
> Minimally make "<vendor>,<chip>-aclint-mswi" into a schema pattern for
> the first entry and perhaps a note to replace with actual strings when
> there are some. It's ultimately up to the RiscV maintainers to require
> SoC specific compatibles here. Allowing a generic one alone makes that
> harder because the schema can't enforce it.

Can we have a common compatible string for QEMU, FPGAs, etc ?

For example,
compatible = "riscv,generic-aclint-mswi", "riscv,aclint-mswi";

Regards,
Anup

>
> Rob

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [RFC PATCH v3 05/11] dt-bindings: interrupt-controller: Add ACLINT MSWI and SSWI bindings
  2021-09-03 10:40         ` Anup Patel
@ 2021-09-07 13:48           ` Rob Herring
  0 siblings, 0 replies; 22+ messages in thread
From: Rob Herring @ 2021-09-07 13:48 UTC (permalink / raw)
  To: Anup Patel
  Cc: Anup Patel, Palmer Dabbelt, Palmer Dabbelt, Paul Walmsley,
	Thomas Gleixner, Marc Zyngier, Daniel Lezcano, Atish Patra,
	Alistair Francis, linux-riscv, linux-kernel@vger.kernel.org List,
	DTML, Bin Meng

On Fri, Sep 3, 2021 at 5:40 AM Anup Patel <anup@brainfault.org> wrote:
>
> On Thu, Sep 2, 2021 at 6:04 AM Rob Herring <robh@kernel.org> wrote:
> >
> > On Wed, Sep 1, 2021 at 6:56 AM Anup Patel <anup@brainfault.org> wrote:
> > >
> > > On Wed, Sep 1, 2021 at 6:54 AM Rob Herring <robh@kernel.org> wrote:
> > > >
> > > > On Mon, Aug 30, 2021 at 09:47:23AM +0530, Anup Patel wrote:
> > > > > We add DT bindings documentation for the ACLINT MSWI and SSWI
> > > > > devices found on RISC-V SOCs.
> > > > >
> > > > > Signed-off-by: Anup Patel <anup.patel@wdc.com>
> > > > > Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
> > > > > ---
> > > > >  .../riscv,aclint-swi.yaml                     | 95 +++++++++++++++++++
> > > > >  1 file changed, 95 insertions(+)
> > > > >  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml
> > > > >
> > > > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml b/Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml
> > > > > new file mode 100644
> > > > > index 000000000000..68563259ae24
> > > > > --- /dev/null
> > > > > +++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,aclint-swi.yaml
> > > > > @@ -0,0 +1,95 @@
> > > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > > +%YAML 1.2
> > > > > +---
> > > > > +$id: http://devicetree.org/schemas/interrupt-controller/riscv,aclint-swi.yaml#
> > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > > +
> > > > > +title: RISC-V ACLINT Software Interrupt Devices
> > > > > +
> > > > > +maintainers:
> > > > > +  - Anup Patel <anup.patel@wdc.com>
> > > > > +
> > > > > +description:
> > > > > +  RISC-V SOCs include an implementation of the M-level software interrupt
> > > > > +  (MSWI) device and the S-level software interrupt (SSWI) device defined
> > > > > +  in the RISC-V Advanced Core Local Interruptor (ACLINT) specification.
> > > > > +
> > > > > +  The ACLINT MSWI and SSWI devices are documented in the RISC-V ACLINT
> > > > > +  specification located at
> > > > > +  https://github.com/riscv/riscv-aclint/blob/main/riscv-aclint.adoc.
> > > > > +
> > > > > +  The ACLINT MSWI and SSWI devices directly connect to the M-level and
> > > > > +  S-level software interrupt lines of various HARTs (or CPUs) respectively
> > > > > +  so the RISC-V per-HART (or per-CPU) local interrupt controller is the
> > > > > +  parent interrupt controller for the ACLINT MSWI and SSWI devices.
> > > > > +
> > > > > +allOf:
> > > > > +  - $ref: /schemas/interrupt-controller.yaml#
> > > > > +
> > > > > +properties:
> > > > > +  compatible:
> > > > > +    oneOf:
> > > > > +      - items:
> > > > > +        - enum:
> > > > > +          - riscv,aclint-mswi
> > > > > +
> > > > > +      - items:
> > > > > +        - enum:
> > > > > +          - riscv,aclint-sswi
> > > >
> > > > All this can be just:
> > > >
> > > > enum:
> > > >   - riscv,aclint-mswi
> > > >   - riscv,aclint-sswi
> > > >
> > > > However...
> > > >
> > > > > +
> > > > > +    description:
> > > > > +      For ACLINT MSWI devices, it should be "riscv,aclint-mswi" OR
> > > > > +      "<vendor>,<chip>-aclint-mswi".
> > > > > +      For ACLINT SSWI devices, it should be "riscv,aclint-sswi" OR
> > > > > +      "<vendor>,<chip>-aclint-sswi".
> > > >
> > > > s/OR/AND/
> > > >
> > > > There must be a compatible for the implementation. Unless RiscV
> > > > implementations of specs are complete describing all clocks, power
> > > > domains, resets, etc. and are quirk free.
> > > >
> > > > But don't write free form constraints...
> > >
> > > It is possible that quite a few implementations (QEMU, FPGAs, and
> > > other simulators) will not require implementation specific compatible
> > > strings. Should we still mandate implementation specific compatible
> > > strings in DTS for such cases?
> >
> > No, but the schema says you only have those cases. Are there not any
> > actual implementations?
>
> All existing RISC-V boards have SiFive CLINT and ACLINT is backward
> compatible with SiFive CLINT so we do have actual implementations.

So there's a SiFive compatible you can add here?

> None of the existing RISC-V boards have special clocks, power domain,
> resets etc for these devices.
>
> >
> > Minimally make "<vendor>,<chip>-aclint-mswi" into a schema pattern for
> > the first entry and perhaps a note to replace with actual strings when
> > there are some. It's ultimately up to the RiscV maintainers to require
> > SoC specific compatibles here. Allowing a generic one alone makes that
> > harder because the schema can't enforce it.
>
> Can we have a common compatible string for QEMU, FPGAs, etc ?
>
> For example,
> compatible = "riscv,generic-aclint-mswi", "riscv,aclint-mswi";

This is not any better than just allowing "riscv,aclint-mswi" by
itself as someone could just use the above strings on their new
implementation to avoid warnings.

You could just not worry about the QEMU and FPGA cases. FPGAs are
probably not upstream and if they are, don't they need specific
compatibles tied to versions of FPGA images? QEMU generating its own
DT doesn't run schema validation though that could change. I'm looking
at enabling schema validation at runtime for purposes of firmware
testing and with that QEMU generated DT may be something we test.

Rob

^ permalink raw reply	[flat|nested] 22+ messages in thread

end of thread, other threads:[~2021-09-07 13:48 UTC | newest]

Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-30  4:17 [RFC PATCH v3 00/11] Linux RISC-V ACLINT Support Anup Patel
2021-08-30  4:17 ` [RFC PATCH v3 01/11] RISC-V: Clear SIP bit only when using SBI IPI operations Anup Patel
2021-08-30  4:17 ` [RFC PATCH v3 02/11] RISC-V: Treat IPIs as normal Linux IRQs Anup Patel
2021-08-30  4:17 ` [RFC PATCH v3 03/11] RISC-V: Allow marking IPIs as suitable for remote FENCEs Anup Patel
2021-08-30  4:17 ` [RFC PATCH v3 04/11] RISC-V: Use IPIs for remote TLB flush when possible Anup Patel
2021-08-30  4:17 ` [RFC PATCH v3 05/11] dt-bindings: interrupt-controller: Add ACLINT MSWI and SSWI bindings Anup Patel
2021-09-01  1:24   ` Rob Herring
2021-09-01 11:56     ` Anup Patel
2021-09-02  0:33       ` Rob Herring
2021-09-03 10:40         ` Anup Patel
2021-09-07 13:48           ` Rob Herring
2021-08-30  4:17 ` [RFC PATCH v3 06/11] dt-bindings: timer: Update SiFive CLINT bindings for IPI support Anup Patel
2021-09-01  1:29   ` Rob Herring
2021-09-01 12:00     ` Anup Patel
2021-09-02  0:18       ` Rob Herring
2021-09-02  5:37         ` Anup Patel
2021-08-30  4:17 ` [RFC PATCH v3 07/11] irqchip: Add ACLINT software interrupt driver Anup Patel
2021-08-30  4:17 ` [RFC PATCH v3 08/11] RISC-V: Select ACLINT SWI driver for virt machine Anup Patel
2021-08-30  4:17 ` [RFC PATCH v3 09/11] dt-bindings: timer: Add ACLINT MTIMER bindings Anup Patel
2021-09-01  1:31   ` Rob Herring
2021-08-30  4:17 ` [RFC PATCH v3 10/11] clocksource: clint: Add support for ACLINT MTIMER device Anup Patel
2021-08-30  4:17 ` [RFC PATCH v3 11/11] MAINTAINERS: Add entry for RISC-V ACLINT drivers Anup Patel

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).