linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Huacai Chen <chenhuacai@gmail.com>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: "David Airlie" <airlied@linux.ie>,
	"Daniel Vetter" <daniel@ffwll.ch>,
	"Xuefeng Li" <lixuefeng@loongson.cn>,
	"Huacai Chen" <chenhuacai@loongson.cn>,
	linux-pci <linux-pci@vger.kernel.org>,
	"Maling list - DRI developers" <dri-devel@lists.freedesktop.org>,
	LKML <linux-kernel@vger.kernel.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Bruno Prémont" <bonbons@linux-vserver.org>
Subject: Re: [PATCH v8 04/10] vgaarb: Move framebuffer detection to ADD_DEVICE path
Date: Tue, 25 Jan 2022 10:51:15 +0800	[thread overview]
Message-ID: <CAAhV-H4GAgKh4HBeWQ+LGf2x_uKy_T5MaMv0dNcYXFKVGAZEzw@mail.gmail.com> (raw)
In-Reply-To: <20220106162058.GA284940@bhelgaas>

Hi, Bjorn,

Why this series still missing in 5.17-rc1? :(

Huacai

On Fri, Jan 7, 2022 at 12:21 AM Bjorn Helgaas <helgaas@kernel.org> wrote:
>
> On Thu, Jan 06, 2022 at 02:44:42PM +0800, Huacai Chen wrote:
> > On Thu, Jan 6, 2022 at 8:07 AM Bjorn Helgaas <helgaas@kernel.org> wrote:
> > > Previously we selected a device that owns the boot framebuffer as the
> > > default device in vga_arb_select_default_device().  This was only done in
> > > the vga_arb_device_init() subsys_initcall, so devices enumerated later,
> > > e.g., by pcibios_init(), were not eligible.
> > >
> > > Fix this by moving the framebuffer device selection from
> > > vga_arb_select_default_device() to vga_arbiter_add_pci_device(), which is
> > > called after every PCI device is enumerated, either by the
> > > vga_arb_device_init() subsys_initcall or as an ADD_DEVICE notifier.
> > >
> > > Note that if vga_arb_select_default_device() found a device owning the boot
> > > framebuffer, it unconditionally set it to be the default VGA device, and no
> > > subsequent device could replace it.
> > >
> > > Link: https://lore.kernel.org/r/20211015061512.2941859-7-chenhuacai@loongson.cn
> > > Based-on-patch-by: Huacai Chen <chenhuacai@loongson.cn>
> > > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> > > Cc: Bruno Prémont <bonbons@linux-vserver.org>
> > > ---
> > >  drivers/gpu/vga/vgaarb.c | 37 +++++++++++++++++--------------------
> > >  1 file changed, 17 insertions(+), 20 deletions(-)
> > >
> > > diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c
> > > index b0ae0f177c6f..aefa4f406f7d 100644
> > > --- a/drivers/gpu/vga/vgaarb.c
> > > +++ b/drivers/gpu/vga/vgaarb.c
> > > @@ -72,6 +72,7 @@ struct vga_device {
> > >         unsigned int io_norm_cnt;       /* normal IO count */
> > >         unsigned int mem_norm_cnt;      /* normal MEM count */
> > >         bool bridge_has_one_vga;
> > > +       bool is_framebuffer;    /* BAR covers firmware framebuffer */
> > >         unsigned int (*set_decode)(struct pci_dev *pdev, bool decode);
> > >  };
> > >
> > > @@ -565,10 +566,9 @@ void vga_put(struct pci_dev *pdev, unsigned int rsrc)
> > >  }
> > >  EXPORT_SYMBOL(vga_put);
> > >
> > > -static void __init vga_select_framebuffer_device(struct pci_dev *pdev)
> > > +static bool vga_is_framebuffer_device(struct pci_dev *pdev)
> > >  {
> > >  #if defined(CONFIG_X86) || defined(CONFIG_IA64)
> > > -       struct device *dev = &pdev->dev;
> > >         u64 base = screen_info.lfb_base;
> > >         u64 size = screen_info.lfb_size;
> > >         u64 limit;
> > > @@ -583,15 +583,6 @@ static void __init vga_select_framebuffer_device(struct pci_dev *pdev)
> > >
> > >         limit = base + size;
> > >
> > > -       /*
> > > -        * Override vga_arbiter_add_pci_device()'s I/O based detection
> > > -        * as it may take the wrong device (e.g. on Apple system under
> > > -        * EFI).
> > > -        *
> > > -        * Select the device owning the boot framebuffer if there is
> > > -        * one.
> > > -        */
> > > -
> > >         /* Does firmware framebuffer belong to us? */
> > >         for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
> > >                 flags = pci_resource_flags(pdev, i);
> > > @@ -608,13 +599,10 @@ static void __init vga_select_framebuffer_device(struct pci_dev *pdev)
> > >                 if (base < start || limit >= end)
> > >                         continue;
> > >
> > > -               if (!vga_default_device())
> > > -                       vgaarb_info(dev, "setting as boot device\n");
> > > -               else if (pdev != vga_default_device())
> > > -                       vgaarb_info(dev, "overriding boot device\n");
> > > -               vga_set_default_device(pdev);
> > > +               return true;
> > >         }
> > >  #endif
> > > +       return false;
> > >  }
> > >
> > >  static bool vga_arb_integrated_gpu(struct device *dev)
> > > @@ -635,6 +623,7 @@ static bool vga_arb_integrated_gpu(struct device *dev)
> > >  static bool vga_is_boot_device(struct vga_device *vgadev)
> > >  {
> > >         struct vga_device *boot_vga = vgadev_find(vga_default_device());
> > > +       struct pci_dev *pdev = vgadev->pdev;
> > >
> > >         /*
> > >          * We select the default VGA device in this order:
> > > @@ -645,6 +634,18 @@ static bool vga_is_boot_device(struct vga_device *vgadev)
> > >          *   Other device (see vga_arb_select_default_device())
> > >          */
> > >
> > > +       /*
> > > +        * We always prefer a firmware framebuffer, so if we've already
> > > +        * found one, there's no need to consider vgadev.
> > > +        */
> > > +       if (boot_vga && boot_vga->is_framebuffer)
> > > +               return false;
> > > +
> > > +       if (vga_is_framebuffer_device(pdev)) {
> > > +               vgadev->is_framebuffer = true;
> > > +               return true;
> > > +       }
> > Maybe it is better to rename vga_is_framebuffer_device() to
> > vga_is_firmware_device() and rename is_framebuffer to
> > is_fw_framebuffer?
>
> That's a great point, thanks!
>
> The "framebuffer" term is way too generic.  *All* VGA devices have a
> framebuffer, so it adds no information.  This is really about finding
> the device that was used by firmware.
>
> I renamed:
>
>   vga_is_framebuffer_device() -> vga_is_firmware_default()
>   vga_device.is_framebuffer   -> vga_device.is_firmware_default
>
> I updated my local branch and pushed it to:
> https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/log/?h=pci/vga
> with head 0f4caffa1297 ("vgaarb: Replace full MIT license text with
> SPDX identifier").
>
> I don't maintain drivers/gpu/vga/vgaarb.c, so this branch is just for
> reference.  It'll ultimately be up to the DRM folks to handle this.
>
> I'll wait for any other comments or testing reports before reposting.
>
> > >         /*
> > >          * A legacy VGA device has MEM and IO enabled and any bridges
> > >          * leading to it have PCI_BRIDGE_CTL_VGA enabled so the legacy
> > > @@ -1531,10 +1532,6 @@ static void __init vga_arb_select_default_device(void)
> > >         struct pci_dev *pdev, *found = NULL;
> > >         struct vga_device *vgadev;
> > >
> > > -       list_for_each_entry(vgadev, &vga_list, list) {
> > > -               vga_select_framebuffer_device(vgadev->pdev);
> > > -       }
> > > -
> > >         if (!vga_default_device()) {
> > >                 list_for_each_entry_reverse(vgadev, &vga_list, list) {
> > >                         struct device *dev = &vgadev->pdev->dev;
> > > --
> > > 2.25.1
> > >

  reply	other threads:[~2022-01-25  4:50 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-06  0:06 [PATCH v8 00/10] vgaarb: Rework default VGA device selection Bjorn Helgaas
2022-01-06  0:06 ` [PATCH v8 01/10] vgaarb: Move vga_arb_integrated_gpu() earlier in file Bjorn Helgaas
2022-01-06  0:06 ` [PATCH v8 02/10] vgaarb: Factor out vga_select_framebuffer_device() Bjorn Helgaas
2022-01-06  0:06 ` [PATCH v8 03/10] vgaarb: Factor out default VGA device selection Bjorn Helgaas
2022-01-06  0:06 ` [PATCH v8 04/10] vgaarb: Move framebuffer detection to ADD_DEVICE path Bjorn Helgaas
2022-01-06  6:44   ` Huacai Chen
2022-01-06 16:20     ` Bjorn Helgaas
2022-01-25  2:51       ` Huacai Chen [this message]
2022-01-25 15:38         ` Bjorn Helgaas
2022-01-26  2:25           ` Huacai Chen
2022-01-06  0:06 ` [PATCH v8 05/10] vgaarb: Move non-legacy VGA " Bjorn Helgaas
2022-01-06  0:06 ` [PATCH v8 06/10] vgaarb: Move disabled VGA device " Bjorn Helgaas
2022-01-06  0:06 ` [PATCH v8 07/10] vgaarb: Remove empty vga_arb_device_card_gone() Bjorn Helgaas
2022-01-06  0:06 ` [PATCH v8 08/10] vgaarb: Log bridge control messages when adding devices Bjorn Helgaas
2022-01-06  0:06 ` [PATCH v8 09/10] vgaarb: Use unsigned format string to print lock counts Bjorn Helgaas
2022-01-06  0:06 ` [PATCH v8 10/10] vgaarb: Replace full MIT license text with SPDX identifier Bjorn Helgaas
2022-01-06 16:30 ` [PATCH v8 00/10] vgaarb: Rework default VGA device selection Bjorn Helgaas
2022-01-08  3:26   ` Huacai Chen
2022-01-31 22:23 ` Bjorn Helgaas
2022-02-01 15:46   ` Maarten Lankhorst
2022-02-07 17:59     ` Bjorn Helgaas
2022-02-08  2:14       ` Huacai Chen
2022-02-14 16:19     ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAAhV-H4GAgKh4HBeWQ+LGf2x_uKy_T5MaMv0dNcYXFKVGAZEzw@mail.gmail.com \
    --to=chenhuacai@gmail.com \
    --cc=airlied@linux.ie \
    --cc=bhelgaas@google.com \
    --cc=bonbons@linux-vserver.org \
    --cc=chenhuacai@loongson.cn \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=helgaas@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lixuefeng@loongson.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).